Tension-compression asymmetry in the mechanical response of hydrogels

Biointegration of soft tissue-inspired hydrogels on the chorioallantoic membrane: An experimental characterization

Soft scaffold materials for cell cultures grafted onto the chorioallantoic membrane (CAM) provide innovative solutions for creating physiologically relevant environments by mimicking the host tissue. Biocompatible hydrogels represent an ideal medium for such applications, but the relationship between scaffold mechanical properties and reactions at the biological interface remains poorly understood. This study examines the attachment and integration of soft hydrogels on the CAM using an accessible ex ovo system. Composite hydrogels of polyvinyl alcohol and Phytagel were fabricated by sterile freeze-thawing. CAM assays, as an alternative to traditional in vivo models, enabled the evaluation of the compatibility, attachment, and biointegration of hydrogels with three distinct compositions. The mechanomimetic properties of the hydrogels were assessed through cyclic compression-tension tests, with nominal peak stresses ranging from 0 . 26 to 2 . 82  kPa in tension and - 0 . 33 to - 2 . 92  kPa in compression. Mechanical attachment to the CAM was measured by pull-off tests after five days of incubation. On the first day, the interface strength was similar for all hydrogel compositions. On day 5 , softer hydrogels showed the greatest increase ( p = 0 . 008 ), followed by intermediate hydrogels ( p = 0 . 020 ), while the denser hydrogels showed negligible changes ( p = 0 . 073 ). Histological analyses revealed cell infiltration in 100 % of soft, 75 % of intermediate, and 13 % of dense hydrogels, suggesting that softer hydrogels integrate better into the CAM by facilitating cell migration and enhancing interface strength. Chicken embryo survival rates and cytotoxicity assays confirmed the biocompatibility of the hydrogels and supported their potential for use in soft, hydrated three-dimensional scaffolds that mimic tissue environments in dynamic biological systems. Statement of significance Current research on soft scaffold materials for cell cultures often overlooks the critical relationship between mechanical properties and biological integration of these materials with host tissues. Although hydrogels, as soft porous materials, hold promise for creating physiologically relevant environments, the mechanisms driving their attachment and biointegration, especially on the chorioallantoic membrane (CAM), remain largely unexplored. This study addresses this gap by investigating the interaction between soft hydrogels and the CAM, providing valuable insights into how material properties and microstructure influence cellular responses. Our findings emphasize the importance of understanding these dynamics to develop biocompatible scaffolds that better mimic tissue environments, advancing applications in three-dimensional cell cultures on CAM assays and other biological systems.

Obtaining and Characterizing Poly(Acid Acrylic-co-Acrylamide) Hydrogels Reinforced with Cellulose Nanocrystals from Acacia farnesiana L. Willd (Huizache)

In this work, cellulose nanocrystals (CNCs) were obtained from the wood of Acacia farnesiana L. Willd (Huizache) via acid hydrolysis; then, they were used to reinforce polyacrylic acid-co-acrylamide (AAc/AAm) hydrogels synthesized in a solution process via in situ free radical photopolymerization. The nanomaterials were characterized using atomic force microscopy, dynamic light scattering (DLS), and the residual charge on the CNCs; the nanohydrogels were characterized using infrared spectroscopy, scanning electron microscopy, swelling kinetics, and Young's modulus. Soluble-grade cellulose presented 94.6% α-cellulose, 0.5% β-cellulose, and 2.7% γ-cellulose, as well as a viscosity of 8.25 cp and a degree of polymerization (DP) of 706. The CNCs averaged 180 nm in length and 20 nm in width. In the nanohydrogels, it was observed that the swelling kinetic behavior followed the Schott kinetic model, at times lower than 500 h; after that, it became linear. The results show that the hydrogel swelling capacity depended on the crosslinking agent and CNC concentration, as well as the CNC chemical and morphological properties, rather than the CNC source. The hydrogels with CNCs exhibited a decreased swelling degree compared to the hydrogels without CNCs. Young's modulus increased with CNC presence and depended on the concentration and characteristics of the CNC as a crosslinking agent.

Digital light processing printing of non-modified protein-only compositions

This study explores the utilization of digital light processing (DLP) printing to fabricate complex structures using native gelatin as the sole structural component for applications in biological implants. Unlike approaches relying on synthetic materials or chemically modified biopolymers, this research harnesses the inherent properties of gelatin to create biocompatible structures. The printing process is based on a crosslinking mechanism using a di-tyrosine formation initiated by visible light irradiation. Formulations containing gelatin were found to be printable at the maximum documented concentration of 30 wt%, thus allowing the fabrication of overhanging objects and open embedded. Cell adhesion and growth onto and within the gelatin-based 3D constructs were evaluated by examining two implant fabrication techniques: (1) cell seeding onto the printed scaffold and (2) printing compositions that contain cells (cell-laden). The preliminary biological experiments indicate that both the cell-seeding and cell-laden strategies enable making 3D cultures of chondrocytes within the gelatin constructs. The mechanical properties of the gelatin scaffolds have a compressive modulus akin to soft tissues, thus enabling the growth and proliferation of cells, and later degrade as the cells differentiate and form a grown cartilage. This study underscores the potential of utilizing non-modified protein-only bioinks in DLP printing to produce intricate 3D objects with high fidelity, paving the way for advancements in regenerative tissue engineering.

Characterization and selection of a skull surrogate for the development of a biofidelic head model

This research paper explores the advancement of physical models simulating the human skull-brain complex, focusing on applications in simulating mild Traumatic Brain Injury (mTBI). Existing models, especially head forms, lack biofidelity in accurately representing the native structures of the skull, limiting the understanding of intracranial injury parameters beyond kinematic head accelerations. This study addresses this gap by investigating the use of additive manufacturing (AM) techniques to develop biofidelic skull surrogates. Materials such as Polylactic Acid (PLA), a bone-simulant PLA variant, and Hydroxyapatite-coated Poly(methyl methacrylate) (PMMA) were used to create models tested for their flexural modulus and strength. The trabecular bone regions were simulated by adjusting infill densities (30%, 50%, 80%) and print raster directions, optimizing manufacturing parameters for biofidelic performance. Among the tested materials, PLA and its bone-simulating variant printed at 80% infill density with a side (tangential) print orientation demonstrated the closest approximation to the mechanical properties of cranial bone, yielding a mean flexural modulus of 1337.2 MPa and a mean ultimate strength of 56.9 MPa. Statistical analyses showed that infill density significantly influenced the moduli and strength of the printed simulants. Digital Image Correlation (DIC) corroborated the comparable performance of the simulants, showing similar strain and displacement behaviors to native skull bone. Notably, the performance of the manufactured cortical and trabecular regions underscored their crucial role in achieving biofidelity, with the trabecular structure providing critical dampening effects when the native bone is loaded. This study establishes PLA, particularly its bone-simulant variant, as an optimal candidate for cranial bone simulants, offering significant potential for developing more accurate biofidelic head models in mTBI research.

Formulation Effects on the Mechano-Physical Properties of In Situ-Forming Resilient Hydrogels for Breast Tissue Regeneration

The need for a long-term solution for filling the defects created during partial mastectomies due to breast cancer diagnosis has not been met to date. All available defect-filling methods are non-permanent and necessitate repeat procedures. Here, we report on novel injectable porous hydrogel structures based on the natural polymers gelatin and alginate, which are designed to serve for breast reconstruction and regeneration following partial mastectomy. The effects of the formulation parameters on the mechanical and physical properties were thoroughly studied. The modulus in compression and tension were in the range of native breast tissue. Both increased with the increase in the crosslinker concentration and the polymer-air ratio. Resilience was very high, above 93% for most studied formulations, allowing the scaffold to be continuously deformed without changing its shape. The combination of high resilience and low elastic modulus is favored for adipose tissue regeneration. The physical properties of gelation time and water uptake are controllable and are affected mainly by the alginate and N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC) concentrations and less by the polymer-air ratio. In vitro cell viability tests were performed on mouse preadipocytes and indicated high biocompatibility. The minimally invasive nature of this approach, along with the excellent properties of the scaffold, will enable the filling of complex voids while simultaneously decreasing surgical costs and greatly improving patient well-being.

Facile Determination of the Poisson's Ratio and Young's Modulus of Polyacrylamide Gels and Polydimethylsiloxane

Polyacrylamide hydrogels (PAH gel) and polydimethylsiloxane (PDMS, an elastomer) are two soft materials often used in cell mechanics and mechanobiology, in manufacturing lab-on-a-chip applications, among others. This is partly due to the ability to tune their elasticity with ease in addition to various chemical modifications. For affine polymeric networks, two (of three) elastic constants, Young's modulus (E), the shear modulus (G), and Poisson's ratio (ν), describe the purely elastic response to external forces. However, the literature addressing the experimental determination of ν for PAH (sometimes called PAA gels in the literature) and the PDMS elastomer is surprisingly limited when compared to the literature that reports values of the elastic moduli, E and G. Here, we present a facile method to obtain the Poisson's ratio and Young's modulus for PAH gel and PDMS elastomer based on static tensile tests. The value of ν obtained from the deformation of the sample is compared to the value determined by comparing E and G via a second independent method that utilizes small amplitude shear rheology. We show that the Poisson's ratio may vary significantly from the value for incompressible materials (ν = 0.5), often assumed in the literature even for soft compressible hydrogels. Surprisingly, we find a high degree of agreement between elastic constants obtained by shear rheology and macroscopic static tension test data for polyacrylamide hydrogels but not for elastomeric PDMS.

Enhancing Robustness of Adhesive Hydrogels through PEG-NHS Incorporation

Tissue wounds are a significant challenge for the healthcare system, affecting millions globally. Current methods like suturing and stapling have limitations as they inadequately cover the wound, fail to prevent fluid leakage, and increase the risk of infection. Effective solutions for diverse wound conditions are still lacking. Adhesive hydrogels, on the other hand, can be a potential alternative for wound care. They offer benefits such as firm sealing without leakage, easy and rapid application, and the provision of mechanical support and flexibility. However, the in vivo durability of hydrogels is often compromised by excessive swelling and unforeseen degradation, which limits their widespread use. In this study, we addressed the durability issues of the adhesive hydrogels by incorporating acrylamide polyethylene glycol N-hydroxysuccinimide (PEG-NHS) moieties (max. 2 wt %) into hydrogels based on hydroxy ethyl acrylamide (HEAam). The results showed that the addition of PEG-NHS significantly enhanced the adhesion performance, achieving up to 2-fold improvement on various soft tissues including skin, trachea, heart, lung, liver, and kidney. We further observed that the addition of PEG-NHS into the adhesive hydrogel network improved their intrinsic mechanical properties. The tensile modulus of these hydrogels increased up to 5-fold, while the swelling ratio decreased up to 2-fold in various media. These hydrogels also exhibited improved durability under the enzymatic and oxidative biodegradation induced conditions without causing any toxicity to the cells. To evaluate its potential for clinical applications, we used PEG-NHS based hydrogels to address tracheomalacia, a condition characterized by inadequate mechanical support of the airway due to weak/malacic cartilage rings. Ex vivo study confirmed that the addition of PEG-NHS to the hydrogel network prevented approximately 90% of airway collapse compared to the case without PEG-NHS. Overall, this study offers a promising approach to enhance the durability of adhesive hydrogels by the addition of PEG-NHS, thereby improving their overall performances for various biomedical applications.

Asymmetry of tensile versus compressive elasticity and permeability contributes to the regulation of exchanges in collagen gels

The Starling principle describes exchanges between blood and tissues based on the balance of hydrostatic and osmotic flows. However, the permeation properties of the main constituent of tissues, namely, collagen, in response to the stress exerted by blood pressure remain poorly characterized. Here, we develop an instrument to determine the elasticity and permeability of collagen gels under tensile and compressive stress based on measuring the temporal change in pressure in an air cavity sealed at the outlet of a collagen slab. Data analysis with an analytical model reveals a drop in the permeability and enhanced strain stiffening of native collagen gels under compression versus tension, both effects being essentially lost after chemical cross-linking. Furthermore, we report the control of the permeability of native collagen gels using sinusoidal fluid injection, an effect explained by the asymmetric response in tension and compression. We lastly suggest that blood-associated pulsations could contribute to exchanges within tissues.

Injectable metronidazole-eluting gelatin-alginate hydrogels for local treatment of periodontitis

Infection of the periodontal pocket presents two major challenges for drug delivery: administration into the periodontal pocket and a high fluid clearance rate in the pocket. The current study aimed to develop and study a novel hydrogel system for delivery of the antibiotic drug metronidazole directly into the periodontal pocket via injection followed by in situ gelation. The natural polymers gelatin and alginate served as basic materials, and their crosslinking using a carbodiimide resulted in a dual hydrogel network. The study focused on the effects of the hydrogel's formulation parameters on the drug release profile and the hydrogel's physical and mechanical properties. A cell viability test was conducted on human fibroblasts. The metronidazole-loaded hydrogels demonstrated a decreasing release rate with time, where most of the drug eluted within 24 h. These hydrogels exhibited fibroblast viability of at least 75% after 24 and 48 h, indicating that they are highly biocompatible. Although the alginate concentration used in this study was relatively low, it had a strong effect on the physical as well as the mechanical properties of the hydrogel. An increase in the alginate concentration increased the crosslinking rate and enabled enhanced entanglement of the 3D structure, resulting in a decrease in the gelation time (less than 10 s) and swelling degree, which are both desired for the studied periodontal application. Increasing the gelatin concentration without changing the crosslinker concentration resulted in significant changes in the physical properties and slight changes in the mechanical properties. Metronidazole incorporation slightly decreased the hydrophilicity of the hydrogel and therefore also its viscosity, and affected the sealing ability and the tensile and compression moduli. The developed hydrogels exhibited controllable mechanical and physical properties, can target a wide range of conditions, and are therefore of high significance in the field of periodontal treatment.

Functional mechanical attributes of natural and synthetic gel-based scaffolds in tissue engineering: strain-stiffening effects on apparent elastic modulus and compressive toughness

The accurate identification and determination of elastic modulus and toughness, as well as other functional mechanical attributes of artificial tissues, are of paramount importance in several fields of tissue science, tissue engineering and technology, since biomechanical and biophysical behavior is strongly linked to biological features of the medical implants and tissue-engineering scaffolds. When soft or ultra-soft materials are investigated, a relevant dispersion of elastic modulus values can be achieved, due to the strain-stiffening effects, inducing a typical non-linear behavior of these materials, as a function of strain-range. In this short communication, the Apparent elastic modulus strain-range dependence is estimated from a segmentation of the strain stiffening curve, and the related compressive toughness is investigated and discussed, based on experimental evidence, for 6 different kinds of gels, used for artificial tissue fabrication; experimental results are compared to mechanical properties of native human tissues.