Mechanical characterization and viscoelastic model of the ovine temporomandibular joint Disc in indentation, uniaxial tension, and biaxial tension

The mechanics of tissue-engineered temporomandibular joint discs: Current status and prospects for enhancement

The temporomandibular joint (TMJ) disc is an essential protective but vulnerable fibrocartilage. Their high mechanical strength is vital in absorbing loads, reducing friction, and protecting the condylar surface. Many diseases can lead to the destruction or degeneration of the mechanical function of the TMJ disc. Unfortunately, conservative treatment is ineffective in restoring the defective mechanical properties of the discs. Tissue engineering has been investigated as a promising alternative treatment approach to approximate the properties of native tissue. However, it is difficult for tissue-engineered discs to obtain sufficient mechanical properties. Several approaches have been proposed to improve the mechanical properties of tissue-engineered constructs. In this review, we summarized the mechanical properties of native TMJ discs and discussed the current mechanical testing methods. We then summarized the current advances in improving the mechanical properties of TMJ disc tissue-engineered constructs. Moreover, existing challenges and outbreak directions are discussed. This review assists future research in better understanding the mechanical properties of both native and tissue-engineered TMJ discs. It provides new insights into future mechanical property enhancement for TMJ disc tissue engineering.

The effect of bolus properties on muscle activation patterns and TMJ loading during unilateral chewing

Mastication is a vital human function and uses an intricate coordination of muscle activation to break down food. Collection of detailed muscle activation patterns is complex and commonly only masseter and anterior temporalis muscle activation are recorded. Chewing is the orofacial task with the highest muscle forces, potentially leading to high temporomandibular joint (TMJ) loading. Increased TMJ loading is often associated with the onset and progression of temporomandibular disorders (TMD). Hence, studying TMJ mechanical stress during mastication is a central task. Current TMD self-management guidelines suggest eating small and soft pieces of food, but patient safety concerns inhibit in vivo investigations of TMJ biomechanics and currently no in silico model of muscle recruitment and TMJ biomechanics during chewing exists. For this purpose, we have developed a state-of-the-art in silico model, combining rigid body bones, finite element TMJ discs and line actuator muscles. To solve the problems regarding muscle activation measurement, we used a forward dynamics tracking approach, optimizing muscle activations driven by mandibular motion. We include a total of 256 different combinations of food bolus size, stiffness and position in our study and report kinematics, muscle activation patterns and TMJ disc von Mises stress. Computed mandibular kinematics agree well with previous measurements. The computed muscle activation pattern stayed stable over all simulations, with changes to the magnitude relative to stiffness and size of the bolus. Our biomedical simulation results agree with the clinical guidelines regarding bolus modifications as smaller and softer food boluses lead to less TMJ loading. The computed mechanical stress results help to strengthen the confidence in TMD self-management recommendations of eating soft and small pieces of food to reduce TMJ pain.

Decellularized-disc based allograft and xenograft prosthesis for the long-term precise reconstruction of temporomandibular joint disc

Currently, no effective disc reconstruction treatment strategy is clinically available for temporomandibular joint (TMJ) disc-related diseases. To address this, we developed a prosthesis construct with laser-drilled decellularized natural disc reinforced by polycaprolactone, which mimics the natural morphology, and structural, biomechanical and biological property of the TMJ disc. The construct demonstrated good biocompatibility, safety and immunological tolerance both in vitro, and in a rat subcutaneous model. During 6 months implantation in an allogeneic rabbit TMJ disc reconstruction model, the disc prosthesis maintained its integrity, collagen fiber-orientation, mechanical property, joint structural stability and prevented articular cartilage and bone from damage. Furthermore, the "upgraded" disc prosthesis obtained from decellularized porcine disc was implanted into a goat TMJ disc reconstruction model. The xenograft prosthesis, with strength and viscoelasticity similar to a natural TMJ disc, was able to restore the structure and function of TMJ up to 20 weeks. These results demonstrate the translational feasibility of an allogeneic or xenogeneic decellularized disc prosthesis for treatment of advanced TMJ disc-related diseases. STATEMENT OF SIGNIFICANCE: This study makes a significant contribution to TMJ disc disease treatment both in theory and in clinics, because: (1) it provided an innovative approach to prepare an artificial TMJ disc with decent mechanical properties and long-term condyle-protecting effect; (2) it specified an advanced decellularized method for fibrocartilage decellularization and xenograft application; (3) it developed a facile and reproducible TMJ disc reconstruction model not only for middle size animal but also for large animal study; (4) the comprehensive and unreported biomechanical tests on the natural TMJ discs would act as a valuable reference for further research in the field of artificial TMJ disc materials or TMJ disc tissue engineering; (5) it suggested a potential treatment for patients with severe TMJ diseases that were commonly met but difficult to treat in clinics.

Strain-Dependent Stress Relaxation Behavior of Healthy Right Ventricular Free Wall

The increasing evidence of stress-strain hysteresis in large animal or human myocardium calls for extensive characterizations of the passive viscoelastic behavior of the myocardium. Several recent studies have investigated and modeled the viscoelasticity of the left ventricle while the right ventricle (RV) viscoelasticity remains poorly understood. Our goal was to characterize the biaxial viscoelastic behavior of RV free wall (RVFW) using two modeling approaches. We applied both quasi-linear viscoelastic (QLV) and nonlinear viscoelastic (NLV) theories to experimental stress relaxation data from healthy adult ovine. A three-term Prony series relaxation function combined with an Ogden strain energy density function were used in the QLV modeling, while a power-law formulation was adopted in the NLV approach. The ovine RVFW exhibited an anisotropic and strain-dependent viscoelastic behavior relative to anatomical coordinates, and the NLV model showed a higher capacity in predicting strain-dependent stress relaxation than the QLV model. From the QLV fitting, the relaxation term associated with the largest time constant played the dominant role in the overall relaxation behavior at all strains from early to late diastole, whereas the term associated with the smallest time constant was pronounced only at low strains at early diastole. From the NLV fitting, the parameters showed a nonlinear dependence on the strain. Overall, our study characterized the anisotropic, nonlinear viscoelasticity to capture the elastic and viscous resistances of the RVFW during diastole. These findings deepen our understanding of RV myocardium dynamic mechanical properties. STATEMENT OF SIGNIFICANCE: Although significant progress has been made to understand the passive elastic behavior of the right ventricle free wall (RVFW), its viscoelastic behavior remains poorly understood. In this study, we originally applied both quasi-linear viscoelastic (QLV) and nonlinear viscoelastic (NLV) models to published experimental data from healthy ovine RVFW. Our results revealed an anisotropic and strain-dependent viscoelastic behavior of the RVFW. The parameters from the NLV fitting showed nonlinear relationships with the strain, and the NLV model showed a higher capacity in predicting strain-dependent stress relaxation than the QLV model. These findings characterize the anisotropic, nonlinear viscoelasticity of RVFW to fully capture the total (elastic and viscous) resistance that is critical to diastolic function.

Clinical Manifestations, Imaging Features, and Pathogenic/Prognostic Risk Factors for Temporomandibular Disorders (TMD): A Case-Control Study Based on Psychogenic Factors of Patients

Objective. To survey the clinical manifestations and imaging features of temporomandibular disorders (TMD) and analyze the risk factors for pathogenesis/prognosis through a case-control study based on psychogenic factors of patients. Methods. According to the inclusion criteria, 200 adult patients were randomly enrolled from the maxillofacial department of our hospital from January 2020 to May 2021, including 100 patients with TMD as the study group and 100 healthy patients as the control group. The study group can be assigned into four subgroups according to their clinical manifestations: (1) articular area or/and masticatory muscle pain group, (2) mandibular movement abnormality group, (3) joint murmur group, and (4) two or more symptom groups. Based on the study of psychogenic factors of patients, the clinical manifestations and imaging features of TMD were determined, and the risk factors for pathogenesis/prognosis were analyzed. Results. The distribution of psychological status in the TMD group was higher than that in the control group ( $P<0.05$ ). The distribution of anxiety, depression, and somatic symptoms in the TMD group was significantly different from that in the control group ( $P<0.05$ ). Anxiety, depression, and somatic symptoms were the risk factors for TMD. Compared with the control group, the incidence of abnormal MRI images in patients with temporomandibular disorders was significantly different ( $P<0.05$ ). There were significant differences in psychological status (anxiety, depression, and somatic symptoms) among the three groups ( $P<0.05$ ). Anxiety, depression, and somatic symptoms were the risk factors for abnormal mandibular movement and joint tremor and murmur ( $P<0.05$ ). Somatic symptoms were the risk factors for various clinical symptoms of TMD ( $P<0.05$ ). Depression was the risk factor for pain ( $P<0.05$ ). Conclusion. In patients with TMD, MRI can early identify disc abnormalities and other related imaging features, which is helpful for more comprehensive clinical evaluation and treatment of TMD patients. There exhibits no significant difference in psychological status (anxiety, depression, and somatic symptoms) of patients with different clinical symptoms, and abnormal psychological status may be one of the risk factors leading to different clinical symptoms and development of different types of TMD patients.

From Animal to Human: (Re)using Acellular Extracellular Matrices for Temporomandibular Disc Substitution

Current treatments for temporomandibular joint (TMJ) disc dysfunctions are not fully effective and lack regenerative capacity. Therefore, the search for tissue-engineered materials for TMJ disc substitution is critical to fill this gap. Decellularization presents tremendous potential, as it is possible to obtain an extracellular matrix with an adequate biomechanical structure and biochemical components. However, its application to the TMJ disc is still in progress, since there are few studies in the literature, and those that exist have many gaps in terms of characterisation, which is decisive to ensure its success. Ultimately, we intend to emphasize the importance of the decellularization technique for the development of an engineered TMJ disc.

An in silico investigation of the effect of bolus properties on TMJ loading during mastication

Mastication is the motor task with the highest muscle activations of the jaw region, potentially leading to high temporomandibular joint (TMJ) loading. Since increased loading of the TMJ is associated with temporomandibular disorders (TMD), TMJ mechanics during chewing has potential clinical relevance in TMD treatment. TMD self-management guidelines suggest eating soft and small pieces of food to reduce TMJ pain. Since TMJ loading cannot be measured in vivo, due to patient safety restrictions, computer modeling is an important tool for investigations of the potential connection between TMJ loading and TMD. The objective of this study is to investigate the effect of food bolus variables on mechanical TMJ loading to help inform better self-management guidelines for TMD. A combined rigid-body-finite-element model of the jaw region was used to investigate the effect of bolus size, stiffness, and position. Mandibular motion and TMJ disc von Mises stress were reported. Computed mandibular motion generally agrees well with previous literature. Disc stress was higher during the closing phase of the chewing cycle and for the non-working side disc. Smaller and softer food boluses overall lead to less TMJ loading. The results reinforce current guidelines regarding bolus modifications and provide new potential guidelines for bolus positioning that could be verified through a future clinical trial. The paper presents a first in silico investigation of dynamic chewing with detailed TMJ stress for different bolus properties. The results help to strengthen the confidence in TMD self-management recommendations, potentially reducing pain levels of patients.