Bond strength of demineralized dentin after synthesized collagen/hydroxyapatite nanocomposite application

Evaluation of incipient enamel-carious-like lesion treated with hydroxyapatite-chitosan nanocomposite hydrogel

BACKGROUND

Non-invasive restoration of tooth enamel is a topic of high relevance in dental material science. Multiple approaches have been proposed to reach optimum reconstruction results. The current study was performed to evaluate the cross-sectional microhardness besides mineral quality and content in artificially induced carious enamel after treatment with hydroxyapatite-chitosan (HAp-CS) nanocomposite gel.

METHODS

Artificially carious lesions were induced by immersion of teeth in acidic carboxymethyl cellulose gel (pH 4.95-5) for 24- and 72-hours periods. Two different compositions of HAp-CS nanocomposite hydrogel were prepared with two different ratios 50/50 (%) and 70/30 (%), respectively. Additionally, sodium fluoride gel (1000 ppm concentration) was prepared and used as reference. Gels were applied to carious lesions twice/day for 3 min/each. After 45 days of application, surface morphology, energy dispersive x-ray spectroscopy, micro-Raman analysis in addition to cross-sectional microhardness were evaluated. Statistical analysis was performed using two-way ANOVA and Tukey's post hoc statistical tests.

RESULTS

Surface morphological evaluation of treated surfaces showed obliteration of surface irregularities. Groups demineralized for 24 hours and treated with 70/30 (HAp-CS) showed highest significant cross-sectional-microhardness (P ≤ 0.05). Evaluated subsurface cross-sectional microhardness showed better mineral quality for groups demineralized for 24 hours and treated with HAp-CS nanocomposite gels.

CONCLUSIONS

Nanocomposite gel with 70/30 (HAp-CS) could efficiently improve cross-sectional microhardness and both minerals composition and quality for lesions demineralized for 24 hours. More severely induced lesions, as demineralized for 72 hours, need more powerful agent compositions and/or prolonged application protocols for improvement.

Effects of proanthocyanidin-functionalized hydroxyapatite nanoparticles on dentin bonding

OBJECTIVES

To evaluate the effect of proanthocyanidin-functionalized hydroxyapatite nanoparticles (nHAp_PA) used as pretreatment at different concentrations on the microtensile bond strength (µTBS) and endogenous enzymatic activity (MMPs) on pH-cycled dentin after 24 h and 6 months of artificial aging.

MATERIALS AND METHODS

Fifty human sound dentin blocks were randomly assigned to 5 groups (n = 10): (i) negative control (no treatment); (ii) positive control (pH-cycling); (iii) pH-cycling + 2% nHAp_PA for 60s; (iv) pH-cycling + 6.5% nHAp_PA for 60s; (v) pH-cycling + 15% nHAp_PA for 60s. A self-etch adhesive was used for bonding procedures before resin composite build-ups. Specimens were tested with the µTBS test after 24 h and 6 months of laboratory storage. The proteolytic activity in each group was evaluated with gelatin zymography and in situ zymography. Data were statistically analyzed (p < 0.05).

RESULTS

At 24 h, the µTBS of the experimental groups were significantly higher than the controls (p ≤ 0.001), and no differences were observed between different concentrations (p > 0.05). Artificial aging significantly decreased bond strength in all groups (p ≤ 0.008); however, nHAp_PA 2% still yielded higher bonding values than controls (p ≤ 0.007). The groups pretreated with nHAp_PA exhibited lower MMP-9 and MMP-2 activities compared to the positive control group and almost the same enzymatic activity as the negative control group. In situ zymography showed that after 6 months of aging, nHAp_PA 2% and nHAp_PA 6,5% decreased enzymatic activity as well as the negative control.

CONCLUSIONS

Dentin pretreatment with nHAp_PA increased the bonding performance of a self-etch adhesive and decreased MMP-2 and MMP-9 activities after 6 months.

Construction of 3D bioprinting of HAP/collagen scaffold in gelation bath for bone tissue engineering

Reconstruction of bone defects remains a clinical challenge, and 3D bioprinting is a fabrication technology to treat it via tissue engineering. Collagen is currently the most popular cell scaffold for tissue engineering; however, a shortage of printability and low mechanical strength limited its application via 3D bioprinting. In the study, aiding with a gelatin support bath, a collagen-based scaffold was fabricated via 3D printing, where hydroxyapatite (HAP) and bone marrow mesenchymal stem cells (BMSCs) were added to mimic the composition of bone. The results showed that the blend of HAP and collagen showed suitable rheological performance for 3D extrusion printing and enhanced the composite scaffold's strength. The gelatin support bath could effectively support the HAP/collagen scaffold's dimension with designed patterns at room temperature. BMSCs in/on the scaffold kept living and proliferating, and there was a high alkaline phosphate expression. The printed collagen-based scaffold with biocompatibility, mechanical properties and bioactivity provides a new way for bone tissue engineering via 3D bioprinting.

Polyphenols Can Improve Resin-Dentin Bond Durability by Promoting Amorphous Calcium Phosphate Nanoparticles to Backfill the Dentin Matrix

Objective

To investigate the effects of proanthocyanidins (PA), myricetin, resveratrol, and kaempferol on the modification of dentin collagen and the inhibition of matrix metalloproteinase (MMP) activity, and to evaluate their contributions to the biomimetic remineralization and resin-dentin bonding performance.

Methods

Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and in situ zymography were applied to verify the collagen modification and MMP activity inhibition induced by these four polyphenols. Scanning electron microscopy/energy dispersive spectrometer (SEM/EDS) analysis, X-ray diffraction (XRD), ATR-FTIR, Vickers hardness numbers (VHN), and micro-computed tomography (micro-CT) were performed to characterize the remineralized dentin. Microtensile bond strength (μTBS) and nanoleakage were investigated to evaluate the effects of the four polyphenols on resin-dentin bonding durability.

Results

ATR-FTIR and in situ zymography confirmed that these four polyphenols could modify dentin collagen and inhibit MMP activity, respectively. Chemoanalytic characterization exhibited the efficacies of the four polyphenols in promoting dentin biomimetic remineralization. The surface hardness of PA-pretreated dentin was the greatest. Micro-CT results demonstrated that the PAs group possessed the highest amount of dentin surface minerals and the lowest amount of deep-layer minerals. The surface and deep-layer mineral contents of the Myr group were higher than Res and Kae groups. Treatment with these four polyphenols significantly increased the initial μTBS compared with the control group without primer conditioning. μTBS decreased significantly during aging, and the decrease was more severe in the PAs and Kae groups than in the Myr and Res groups. With or without aging, the polyphenol groups exhibited relatively less fluorescence. However, the Myr and Res groups showed less serious nanoleakage after aging.

Conclusion

PA, myricetin, resveratrol, and kaempferol can modify dentin collagen, inhibit MMP activity, promote biomimetic remineralization, and improve resin-dentin bond durability. Compared with PA and kaempferol, myricetin and resveratrol are more effective in improving resin-dentin bonding.

An artificial bone filling material of poly l-lactic acid/collagen/nano-hydroxyapatite microspheres: Preparation and collagen regulation on the property

Artificial bone materials are in great need due to a lot of bone injuries. Herein, collagen/nano-hydroxyapatite (Col/nHA, C-H) composite nanospheres were obtained by in-situ mineralization, and poly L-lactic acid/collagen/nano-hydroxyapatite (PLLA/Col/nHA, P-C-H) was further prepared by high-speed shear emulsification method. The interfacial properties and structure between PLLA and nHA are regulated by the adhesive property of Col. The morphology, structure and properties of P-C-H microsphere were characterized in detail by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) and simulated degradation of PBS in vitro. The results show that C-H is uniformly distributed in P-C-H microspheres, and a mesoporous material with a "pomegranate" structure and a particle size of 5-30 μm is self-assembled based on C-H multiple composite microspheres. It is beneficial to the sustained-release degradation of P-C-H and the retention/release of Ca²⁺. The 60-day PBS degradation shows that PLLA delays the degradation of nHA, making the degradation rate of P-C-H basically consist with the human bone healing cycle. The co-culture of P-C-H with MC3T3-E1 cells shows that P-C-H has high biocompatibility and no cytotoxicity. The cell viability is higher than 100 % in 72 h, indicating P-C-H has a proliferation effect on cell growth. Alkaline phosphatase and quantitative real-time PCR test show a positive promotion of P-C-H in cell proliferation and differentiation. The multi-layered P-C-H microspheres have an application potential in bone tissue engineering.

Effect of collagen cross-linkers on dentin bond strength: A systematic review and network meta-analysis

Objective: This study aimed to evaluate the role of collagen cross-linkers in the bonding performance of the resin-dentin interface through a systematic review and a network meta-analysis. Sources: The literature search was conducted in several databases like PubMed, EMBASE, Cochrane, Scopus and Web of Science from their inception till 30 April 2022. Study selection: The inclusion criteria consisted of in vitro studies evaluating the micro-tensile and micro-shear bond strengths of different cross-linkers acting on dentin. Bayesian network meta-analysis was conducted using RStudio. Data: Out of the 294 studies evaluated in the full-text analysis, 40 were included in the systematic review and meta-analysis. Most studies have used cross-linkers as primer (65.1%), followed by incorporating them into in adhesives and acid etching agents. The application methods of the adhesive system were classified as "etch-and-rinse (ER) adhesives" (77%) and "self-etching (SE) adhesives". Moreover, there were six types of cross-linkers in this presented review, of which the most numerous were polyphenols. Conclusion: Different application methods of cross-linkers, the long-term results showed that were only effective when used for longer durations, the immediate results were not statistically different. According to immediate and long-term results, etch-and-rinse (ER) adhesives showed a greater bonding performance than the control groups (p ≤ 0.05), whereas self-etching (SE) adhesives showed similar bond strength values (p ≥ 0.05). The result of network meta-analysis (NMA) showed that Dope like compound showed higher long-term bonding performance than other cross-linkers. Clinical significance: Long-term clinical studies may be needed to determine the effect of the cross-linkers on the bonding properties.

Nanomaterials in Dentistry: Current Applications and Future Scope

Nanotechnology utilizes the mechanics to control the size and morphology of the particles in the required nano range for accomplishing the intended purposes. There was a time when it was predominantly applied only to the fields of matter physics or chemical engineering, but with time, biological scientists recognized its vast benefits and explored the advantages in their respective fields. This extension of nanotechnology in the field of dentistry is termed ‘Nanodentistry.’ It is revolutionizing every aspect of dentistry. It consists of therapeutic and diagnostic tools and supportive aids to maintain oral hygiene with the help of nanomaterials. Research in nanodentistry is evolving holistically but slowly with the advanced finding of symbiotic use of novel polymers, natural polymers, metals, minerals, and drugs. These materials, in association with nanotechnology, further assist in exploring the usage of nano dental adducts in prosthodontic, regeneration, orthodontic, etc. Moreover, drug release cargo abilities of the nano dental adduct provide an extra edge to dentistry over their conventional counterparts. Nano dentistry has expanded to every single branch of dentistry. In the present review, we will present a holistic view of the recent advances in the field of nanodentistry. The later part of the review compiled the ethical and regulatory challenges in the commercialization of the nanodentistry. This review tracks the advancement in nano dentistry in different but important domains of dentistry.