Mesoporous silica aerogel reinforced dental composite: Effects of microstructure and surface modification

Effects of Hexagonal Boron Nitride and Mesoporous Silica Nanoparticles on the Morphology, Mechanical Properties and Antimicrobial Activity of Dental Composites

Hexagonal boron nitride (HBN), an artificial material with unique properties, is used in many industries. This article focuses on the extent to which hexagonal boron nitride and silica nanoparticles (MSN) affect the physicochemical and mechanical properties and antimicrobial activity of prepared dental composites. In this study, HBN, and MSN were used as additives in dental composites. 5% and 10% by weight of HBN are added to the structure of the composite materials. FTIR analysis were performed to determine the components of the produced boron nitride powders, hexagonal boron nitride-containing composites, and filling material applications. The structural and microstructural properties of dental composites have been extensively characterized using X-ray diffractometry (XRD). Surface morphology and distributions of nano boron nitride were determined by scanning electron microscopy (SEM)-EDS. In addition, the solubility of dental composites in water and their stability in water and chemical solution (Fenton) were determined by three repetitive experiments. Finally, the antimicrobial activity of dental composites was detected by using Minimum Inhibitory Concentration (MIC) measurement, as well as Minimum Fungicidal Concentration (MFC) method against yeast strain Saccharomyces cerevisiae, and Minimum Bactericidal Concentration (MBC) method against bacteria strains, Staphylococcus aureus and Escherichia coli. Since the HMP series have better antimicrobial activity than the HP series, they are more suitable for preventing dental caries and for long-term use of dental composites. In addition, when HMP and HP series added to the composite are compared, HMP-containing dental composites have better physicochemical and mechanical properties and therefore have a high potential for commercialization.

Properties of Nanohybrid Dental Composites-A Comparative In Vitro Study

(1) Background: the current study investigated three nanohybrid composites: two commercial products ClearfilMajestyTM (CM) and HarmonizeTM (HU), compared with an experimental product PS2. (2) Methods: Two sample types were molded using Teflon dies. The first sample type was represented by standard discs (20 mm diameter and 2 mm thickness) (n = 60, 20/each material), used for surface conditioning investigation, specifically roughness monitoring and color stability analysis using AFM and the CIELab test, respectively. The second sample type was a standard cylindrical specimen (4 mm diameter and 6 mm height) for compression testing (n = 60, 20/each material). After complete polymerization, the samples were ground with sandpaper and further polished. The filler size and distribution in the polymer matrix were investigated with SEM. Data were statistically analyzed using the Anova Test followed by Tukey's post hoc test on the Origin Lab 2019 software produced by OriginLab Corporation, Northampton, MA, USA. (3) Results: A mono-disperse system was identified in HU samples, while CM and PS2 revealed both nano- and microfiller particles. The samples' observation after immersion in coffee and tea indicated that a lower roughness combined with optimal filler lamination within the polymer matrix assured the best color preservation. The compression strength was lower for the HU sample, while higher values were obtained for the complex filler systems within CM and PS2. (4) Conclusions: the behavior of the investigated nanohybrid composites strongly depends on the microstructural features.

Effects of silica surface modification with silane and poly(ethylene glycol) on flexural strength, protein-repellent, and antibacterial properties of acrylic dental nanocomposites

OBJECTIVE

The main aim of the current work was to develop dental acrylic-based composites with protein-repellent and antibacterial properties by using surface-modified silica nanoparticles. The effects of surface modification of silica nanoparticles in protein-repellent and antibacterial activity and mechanical properties of dental composites including flexural strength, flexural modulus, and hardness were discussed.

METHODS

The surface of silica nanoparticles was first chemically treated with 3-methacryloxypropyltrimethoxysilane (MPS) as a coupling agent and then with poly(ethylene glycol) (PEG) bonded to MPS. Dental acrylic-based composites were prepared with mass fractions of 10, 15, 20, 30, and 40 % of PEG-modified MPS-silica nanoparticles (PMS). The chemical surface modification of silica nanoparticles with MPS and PEG was confirmed by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA).

RESULTS

The dental composite containing 20 wt% PMS nanoparticles could reduce the protein adsorption by 28 % as compared with a composite containing 20 wt% MPS-modified silica. The antibacterial test indicated that the PMS nanoparticles can significantly reduce the adhesion of Streptococcus mutans and the biofilm formation on the surface of dental composites. It was found that the flexural strength increased by increasing the PMS nanoparticles from 0 to 20 wt% and then decreased by the incorporation of higher percentages of these nanoparticles. Also, with increasing the weight percentage of PMS nanoparticles, the elastic and the flexural modulus and the hardness of resin nanocomposites were increased.

SIGNIFICANCE

In the current work, for the first time, dental resin composites containing PEG were prepared with excellent protein-repellent and antibacterial properties.

Micromechanical interlocking structure at the filler/resin interface for dental composites: a review

Dental resin composites (DRCs) are popular materials for repairing caries or dental defect, requiring excellent properties to cope with the complex oral environment. Filler/resin interface interaction has a significant impact on the physicochemical/biological properties and service life of DRCs. Various chemical and physical modification methods on filler/resin interface have been introduced and studied, and the physical micromechanical interlocking caused by the modification of fillers morphology and structure is a promising method. This paper firstly introduces the composition and development of DRCs, then reviews the chemical and physical modification methods of the filler/resin interface, mainly discusses the interface micromechanical interlocking structures and their enhancement mechanism for DRCs, finally give a summary on the existing problems and development potential.

Emerging Trends in Nanotechnology: Aerogel-Based Materials for Biomedical Applications

At present, aerogel is one of the most interesting materials globally. The network of aerogel consists of pores with nanometer widths, which leads to a variety of functional properties and broad applications. Aerogel is categorized as inorganic, organic, carbon, and biopolymers, and can be modified by the addition of advanced materials and nanofillers. Herein, this review critically discusses the basic preparation of aerogel from the sol-gel reaction with derivation and modification of a standard method to produce various aerogels for diverse functionalities. In addition, the biocompatibility of various types of aerogels were elaborated. Then, biomedical applications of aerogel were focused on this review as a drug delivery carrier, wound healing agent, antioxidant, anti-toxicity, bone regenerative, cartilage tissue activities and in dental fields. The clinical status of aerogel in the biomedical sector is shown to be similarly far from adequate. Moreover, due to their remarkable properties, aerogels are found to be preferably used as tissue scaffolds and drug delivery systems. The advanced studies in areas including self-healing, additive manufacturing (AM) technology, toxicity, and fluorescent-based aerogel are crucially important and are further addressed.

A comprehensive review of hydrophobic silica and composite aerogels: synthesis, properties and recent progress towards environmental remediation and biomedical applications

The hydrophobicity of silica and composite aerogels has enabled them to acquire applications in a variety of fields. With remarkable structural, morphological, and physiochemical properties such as high porosity, surface area, chemical stability, and selectivity, these materials have gained much attention of researchers worldwide. Moreover, the hydrophobic conduct has enabled these aerogels to adsorb substances, i.e., organic pollutants, without collapsing the pore and network structure. Hence, considering such phenomenal properties and great adsorption potential, exploiting these materials for environmental and biomedical applications is trending. The present study explores the most recent advances in synthetic approaches and resulting properties of hydrophobic silica and composite aerogels. It presents the various precursors and co-precursors used for hydrophobization and gives a comparative analysis of drying methods. Moreover, as a major focus, the work presents the recent progress where these materials have shown promising results for various environmental remediation and biomedical applications. Finally, the bottlenecks in synthesis and applicability along with future prospects are given in conclusions.

Rational Design of Mesoporous Silica (SBA-15)/PF (Phenolic Resin) Nanocomposites by Tuning the Pore Sizes of Mesoporous Silica

The development of composite materials with functional additives proved to be an effective way to improve or supplement the required properties of polymers. Herein, mesoporous silica (SBA-15) with different pore sizes were used as functional additives to prepare SBA-15/PF (phenolic resin) nanocomposites, which were prepared by in situ polymerization and then, compression molding. The physical properties and structural parameters of SBA-15 with different pore sizes were characterized by N2 adsorption-desorption, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The thermal properties of the SBA-15/PF hybrid were investigated by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The mechanical, friction, and dynamic mechanical properties of SBA-15/PF nanocomposites were also studied. The results revealed that the pore sizes of SBA-15 have a significant effect on the resulting SBA-15/PF hybrid and SBA-15/PF nanocomposites. The thermal stability of the SBA-15/PF hybrid was dramatically improved in comparison with pure PF. The friction and dynamic mechanical properties of the SBA-15/PF nanocomposites were enhanced significantly. Specifically, the glass transition temperature (Tg) of the nanocomposite increased by 19.0 °C for the SBA-15/PF nanocomposites modified with SBA-15-3. In addition, the nanocomposite exhibited a more stable friction coefficient and a lower wear rate at a high temperature. The enhancement in thermal and frictional properties for the nanocomposites is ascribed to the confinement of the PF chains or chain segments in the mesopores channels.

Preparation of Silica Aerogel/Resin Composites and Their Application in Dental Restorative Materials

As the most advanced aerogel material, silica aerogel has had transformative industrial impacts. However, the use of silica aerogel is currently limited to the field of thermal insulation materials, so it is urgent to expand its application into other fields. In this work, silica aerogel/resin composites were successfully prepared by combining silica aerogel with a resin matrix for dental restoration. The applications of this material in the field of dental restoration, as well as its performance, are discussed in depth. It was demonstrated that, when the ratio of the resin matrix Bis-GMA to TEGDMA was 1:1, and the content of silica aerogel with 50 μm particle size was 12.5%, the composite achieved excellent mechanical properties. The flexural strength of the silica aerogel/resin composite reached 62.9546 MPa, which was more than five times that of the pure resin. Due to the presence of the silica aerogel, the composite also demonstrated outstanding antibacterial capabilities, meeting the demand for antimicrobial properties in dental materials. This work successfully investigated the prospect of using commercially available silica aerogels in dental restorative materials; we provide an easy method for using silica aerogels as dental restorative materials, as well as a reference for their application in the field of biomedical materials.

Investigation of antimicrobial and mechanical effects of functional nanoparticles in novel dental resin composites

OBJECTIVES

Imidazole and benzimidazole derivatives have recently attracted attention as remarkable materials due to their advantages in chemistry, pharmacology, and biomaterials. This article focuses on dental composites with azole functional groups incorporated to affect their physicochemical and mechanical properties and antibacterial activity.

METHODS

Dental composites were fabricated by embedding the functionalized imidazole and benzimidazole nanoparticles into a Bis-GMA/TEGDMA matrix to form the imidazole and benzimidazole dental composites series (I and B). The material was produced through hand blending of the monomer (50:50, wt%), filler (0-30, wt%), and initiator combination (CQ/EDMAB:0.8:1.6, wt%), and LED light-curing unit for 60 s.

RESULTS

Using various characterization techniques, I and B series were validated. The dental composites' approximate solubility and sorption significances were evaluated by conducting experiments on specific dental composite formulations. Fenton reaction test was performed to determine the chemical stability of the dental composites. The mechanical properties of the dental composites were investigated. Finally, by testing cell growth in the presence of composites, their antibacterial activities were determined.

CONCLUSIONS

In this study, it was observed that the mechanical, physiochemical, and antibacterial properties of the functional azole-containing nanoparticles were positively improved by adding them to the structure of dental composites. These experimental results paved the way for the synthesized materials to be used in industrial applications.

CLINICAL SIGNIFICANCE

Since the chemical, mechanical, and antimicrobial properties of dental composites containing 10% imidazole and benzimidazole functional nanoparticles are far superior, they constitute an excellent alternative for preventing dental caries and long-term use of dental composites.

Degradation of Tetracycline on SiO2-TiO2-C Aerogel Photocatalysts under Visible Light

SiO₂-TiO₂-C aerogel photocatalysts with different carbon loadings were synthesized by using sol-gel chemistry. The anatase crystal and nonmetal carbon dopant were introduced during the sol preparation and formed by hydrothermal treatment, which can simultaneously enhance the adsorption ability and visible light photo-activity. A high surface area (759 g cm⁻³) SiO₂-TiO₂-C aerogel composite can remove up to 80% tetracycline hydrochloride within 180 min under visible light. The characterization of the gel structures shows that the homogeneous dispersion of O, Si, Ti and C in the skeleton, indicating that hydrothermal synthesis could provide a very feasible way for the preparation of composite materials. n(C):n(Ti) molar ratio of 3.5 gives the best catalytic performance of the hybrid aerogel, and the cyclic test still confirms over 60% degradation activity after seven use cycles. All catalysis reaction followed the pseudo-first-order rate reaction with high correlation coefficient. The electrons and holes in the compound could be effectively restrained with doping proper amount of C, and ESR results indicate that the oxidation process was dominated by the hydroxyl radical (•OH) and superoxide radical (•O₂⁻) generated in the system.