Surface functionalization of twisted graphene C32H15 and C104H52 derivatives with alkalis and superalkalis for NLO response; a DFT study

Theoretical design of alkaline earthides M+(36 adz) Be- (M+ = V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) with excellent nonlinear optical response and ultraviolet transparency

A novel series of alkaline earthides containing eight complexes based upon 36adz complexant are designed by placing carefully transition metals (V-Zn) on inner side and alkaline earth metal outer side of the complexant i.e., M+(36adz) Be- (M+ = V, Cr, Mn, Fe, Co, Ni, Cu and Zn). All the designed compounds are electronically and thermodynamically stable as evaluated by their interaction energy and vertical ionization potential respectively. Moreover, the true nature of alkaline earthides is verified through NBOs and FMO study, showing negative charge and excess electrons on alkaline earth metal respectively. Furthermore, true alkaline earthides characteristics are evaluated graphically by spectra of partial density state (PDOS). The energy gap (HOMO -LUMO gap) is very small (ranging 2.95 eV-1.89 eV), when it is compared with pure cage 36adz HOMO-LUMO gap i.e., 8.50 eV. All the complexes show a very small value of transition energy ranging from 1.68eV to 0.89eV. Also, these possess higher hyper polarizability values up to 2.8 x 105au (for Co+(36adz) Be-). Furthermore, an increase in hyper polarizability was observed by applying external electric field on complexes. The remarkable increase of 100fold in hyper polarizability of Zn+(36adz) Be- complex is determined after application of external electric field i.e., from 1.7 x 104 au to 1.7 x 106 au when complex is subjected to external electric field of 0.001 au strength. So, when external electric field is applied on complexes it enhances the charge transfer, polarizability and hyper polarizability of complexes and proves to be effective for designing of true alkaline earthides with remarkable NLO response.

Influence of benzothiophene acceptor moieties on the non-linear optical properties of pyreno-based chromophores: first-principles DFT framework

Herein, a series of heterocyclic organic compounds (PYFD1-PYFD7) are designed with different acceptor moieties at the terminal position of a reference compound (PYFR) for nonlinear optical (NLO) active materials. The optoelectronic characteristics of the designed chromophores were investigated using density functional theory (DFT) calculations with the M06/6-311G(d,p) functional. Frontier molecular orbital (FMO) analysis revealed a significant decrease in the energy of the band gaps (2.340-2.602 eV) for the derivatives as compared to the PYFR reference compound (3.12 eV). An efficient transfer of charge from the highest occupied molecular orbital (HOMO) to the lowest unoccupied molecular orbital (LUMO) was seen, which was further corroborated by the density of states (DOS) and transition density matrix (TDM) heat maps. The results of the global reactivity parameters (GRPs) indicated that all derivatives exhibited greater softness (σ = 0.384-0.427 eV) and lower hardness (η = 0.394-1.302 eV) as compared to PYFR, indicating a higher level of polarizability in the derivatives. Moreover, all of the derivatives showed significant findings in terms of nonlinear optical (NLO) results as compared to the reference chromophore. PYFD2 showed the most effective NLO response (α = 1.861 × 10-22 and βtot = 2.376 × 10-28 esu), including a lowered band gap of 2.340 eV, the maximum softness value of 0.4273 eV, and the lowest hardness value of 1.170 eV as compared to other chromophores. The incorporation of different acceptors and thiophene as a π-spacer in this structural alteration significantly contributed to achieving remarkable NLO responses. Therefore, our findings may motivate experimentalists to synthesize these designed NLO active materials for the current advanced technological applications.

Frequency-dependent nonlinear optical response and refractive index investigation of lactone-derived thermochromic compounds

Nonlinear optical (NLO) switchable materials play a crucial role in the fields of electronics and optoelectronics. The selection of an appropriate switching approach is vital in designing such materials to enhance their NLO response. Among various approaches, thermos-switching materials have shown a 4-fold increase in NLO response compared to other photo-switching materials. In this study, we computationally investigated the geometric, electronic, and nonlinear optical properties of reversible lactone-based thermochromic compounds using the ωB97XD/6-311+G (d,p) level of theory. Molecular orbital studies are employed to analyze the electronic properties of the close and open isomers of these compounds, while time-dependent density functional theory (TD-DFT) analysis is utilized to evaluate their molecular absorption. Our findings reveal that the π-electronic conjugation-induced delocalization significantly influences the ON-OFF switchable nonlinear optical response of the lactone-based thermochromic compounds. Notably, among all compounds, the open isomer of lactone 2 exhibits the highest hyperpolarizability value (6596.69 au). Furthermore, we extended our analysis to investigate the frequency-dependent second and third-order hyperpolarizabilities. The most pronounced frequency-dependent NLO response is observed at 532 nm. Additionally, we calculated the refractive index of these thermochromic compounds to further assess their nonlinear optical response. The open isomer of lactone 1 demonstrates the highest refractive index value (3.99 × 10-14 cm2/W). Overall, our study highlights the excellent potential of reversible thermochromic compounds as NLO molecular thermos-switches for future applications.

Theoretical study of the Tetraaminelithium and Tetraaminesodium molecules complexed with H-, Li- and Na- anions: static and dynamic NLO parameters

CONTEXT

This work focuses on the study of six molecules composed of the TetraAmineLithium (TALi+) and TetraAmineSodium (TANa+) structures linked with the anions H-, Li- and Na-. The NLO results obtained by these calculations showed significant values of static first hyperpolarizabilities (βtot) ranging from 8.74 * 10-30 to 691.99 * 10-30 esu. The two molecules TALi-Li and TALi-Na gave the highest values of static βtot equal to 563.20 and 691.99 * 10-30 esu respectively and static second hyperpolarizabilities (γav) of 680.02 and 779.05 * 10-35 esu. The highest dynamic first hyperpolarizabilities (β||) values are around 1474080.00 * 10-30 esu and 6,145,080.00 * 10-30 esu at 720 nm lasers and which are attributed to the two molecules TANa-Li and TANa-Na respectively. Four molecules have push-pull behavior where the anions are donor groups, the Li+-NH3 and Na+-NH3 groups are acceptor groups and a bridge composed by the three remaining NH3 ligands. The maximum wavelengths (λmax) in vacuum and in the presence of solvents for all molecules are in the range 240 to 870 nm.

METHOD

The software used in this study is Gaussian 16. The optimizations of the molecules were calculated by B3LYP-D3/6-31 +  + G(d,p). The static first hyperpolarizability (βtot) was calculated by different functionals: CAM-B3LYP, LC-wPBE, LC-BLYP, M11, wB97X, HSEh1PBE and M06-2X and the MP2 method, the basis-set used is 6-31 +  + G(d,p). Other calculations of static βtot were carried out by the CAM-B3LYP functional combined with several basis-sets: 6-31G(d,p), 6-31 +  + G(d,p), cc-pVDZ, AUG-cc- pVDZ, 6-311G(d,p), 6-311 +  + G(d,p), cc-pVTZ and AUG-cc-pVTZ. The calculations of the first (β||) and second (γ||) hyperpolarizabilities in second harmonic generation (SHG) were calculated by CAM-B3LYP/6-31 +  + G(d,p). The delocalization energies (E(2)) were determined by the NBO approach and calculated by the same functional and basis-set cited before. The solvation Gibbs energies (ΔGsolv) were calculated using the implicit SMD model. Maximum wavelengths (λmax) and oscillator strengths ([Formula: see text]) were calculated by TD-CAM-B3LYP/6-31 +  + G(d,p) in the presence of the implicit CPCM model.

Theoretical Perspective toward Designing of 5-Methylbenzo [1,2-b:3,4-b':6,5-b″] trithiophene-Based Nonlinear Optical Compounds with Extended Acceptors

A series of benzotrithiophene-based compounds (DCTM1-DCTM6) having D1-π1-D2-π2-A configuration were designed using a reference molecule (DCTMR) via incorporating pyrrole rings (n = 1-5) as the π-spacer (π2). Quantum chemical calculations were performed to determine the impact of the pyrrole ring on the nonlinear optical (NLO) behavior of the above-mentioned chromophores. The optoelectronic properties of the compounds were determined at the MW1PW91/6-311G(d,p) functional. Among all of the derivatives, DCTM5 exhibited the least highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) band gap (Eg) 0.968 eV with a high softness of 0.562 eV-1, and hence possessed the highest polarizability. Interestingly, transition density matrix (TDM) findings demonstrated that DCTM5 with an effective diagonal charge transmission proportion at the acceptor group supports the frontier molecular orbital (FMO) results. Additionally, the exciton binding energy values for DCTM1-DCTM6 were found to be less than that for DCTMR and thus, the effective charge transfer was examined in the derivatives. All of the derivatives exhibited effective NLO outcomes with the highest magnitude of linear polarizability ⟨α⟩, and first (βtot) and second (γtot) hyperpolarizabilities relative to the parent compound. Nevertheless, the highest βtot and γtot were obtained for DTCM1 and DTCM6, 7.0440 × 10-27 and 22.260 × 10-34 esu, respectively. Hence, through this structural tailoring with a pyrrole spacer, effective NLO materials can be obtained for optoelectronic applications.

Enhanced nonlinear optical response of alkalides based on stacked Janus all-cis-1,2,3,4,5,6-hexafluorocyclohexane

Significant efforts are continuously exerted by the scientific community to explore new strategies to design materials with high nonlinear optical responses. An effective approach is to design alkalides based on Janus molecules. Herein, we present a new approach to remarkably boost the NLO response of alkalides by stacking the Janus molecules. Alkalides based on stacked Janus molecule, M-n-M' (where n = 2 & 3 while M and M' are Li/Na/K) are studied for structural, energetic, electrical, and nonlinear optical properties. The thermodynamic stability of the designed complexes is confirmed by the energetic stabilities, which range between -14.07 and -28.77 kcal/mol. The alkalide character of alkali metals-doped complexes is confirmed by the NBO charge transfer and HOMO(s) densities. The HOMO densities are located on the doped alkali metal atoms, indicating their alkalide character. The absorptions in UV-Vis and near IR region confirm the deep ultraviolet transparency of the designed complexes. The maximum first static and dynamic hyperpolarizabilities of 5.13 × 107 and 6.6 × 106 au (at 1339 nm) confirm their high NLO response, especially for K-2-M' complexes. The NLO response of alkalides based on stacked Janus molecules is 1-2 orders of magnitude higher than the alkalide based on Janus monomer. The high values of dc-Kerr and electric field-induced response e.g., max ∼107 and 108 au, respectively have been obtained. These findings suggest that our designed complexes envision a new insight into the rational design of stable high NLO performance materials.

A three orders of magnitude increase in nonlinear optical response by external electric field on Cryptand[2.2.2] (C222) based alkaline earthides

A new series of alkaline earthides based on Cryptand [2.2.2] (C222) containing nine complexes is designed by carefully placing alkali metals and alkaline earth metals inside and outside the C222 complexant, respectively i.e., M1(C222)M2 (M1 = Li, Na, K; M2 = Be, Mg, Ca). The designed complexes are reasonably stable both electronically and thermodynamically, as revealed through their vertical ionization potentials (VIPs) and interaction energies, respectively. Moreover, the true alkaline earthide nature of the complexes is confirmed through NBO and FMO analyses showing the negative charges and HOMOs over the alkaline earth metals, respectively. The further validity of true earthide characteristic is represented graphically by the spectra of partial density of states (PDOS). HOMO-LUMO gaps of the compounds are also very small (from 2.23 to 2.83 eV) when compared with pure cage's (C222) H-L gap i.e., 5.63 eV. All these features award these complexes with very small values of transition energies (ΔE) ranging from 0.68 to 2.06 eV ultimately resulting in remarkably high hyperpolarizability values up to 2.7 × 10⁵ au (for Na⁺(C222)Mg^-). Furthermore, applying external electric field (EEF) on the complexes enhances hyperpolarizability further. A remarkable increase of 1000 folds has been seen when hyperpolarizability of K⁺(C222)Ca^- is calculated after EEF application i.e., from 8.79 × 10⁴ au to 2.48 × 10⁷ au; when subjected to 0.001 au external electric field.

Role of donors in triggering second order non-linear optical properties of non-fullerene FCO-2FR1 based derivatives: A theoretical perspective

The organic compounds are known as an emerging class in the field of nonlinear optical (NLO) materials. In this paper, D-π-A configured oxygen containing organic chromophores (FD2-FD6) were designed by incorporating various donors in the chemical structure of FCO-2FR1. This work is also inspired by the feasibility of FCO-2FR1 as an efficient solar cell. Theoretical approach involving DFT functional i.e., B3LYP/6-311G(d,p) was utilized to achieve useful information regarding their electronic, structural, chemical and photonic properties. The structural modifications revealed significant electronic contribution in designing HOMOs and LUMOs for the derivatives with lowered energy gaps. The lowest HOMO-LUMO band gap obtained was 1.223 eV for FD2 compound in comparison to the reference molecule (FCO-2FR1) i.e., 2.053 eV. Moreover, the DFT findings revealed that the end-capped substituents play a key role in enhancing the NLO response of these push-pull chromophores. The UV-Vis spectra of tailored molecules revealed larger λ _max values than the reference compound. Furthermore, strong intramolecular interactions showed the highest stabilization energy (28.40 kcal mol^-1) for FD2 in the natural bond orbitals (NBOs) transitions, combined with the least binding energy (-0.432 eV). Successfully, the NLO results were favorable for the same chromophore (FD2) which showed the highest value for dipole moment (μ _tot = 20.049 D) and first hyper-polarizability (β _tot = 11.22 × 10^-27 esu). Similarly, the largest value for linear polarizability ⟨α⟩ was obtained as 2.936 × 10^-22 esu for FD3 compound. Overall, the designed compounds were calculated with greater NLO values as compared to FCO-2FR1. The current study may provoke the researchers towards designing of highly efficient NLO materials via using the suitable organic linking species.

Potential sensing of toxic chemical warfare agents (CWAs) by twisted nanographenes: A first principle approach

The toxic chemical warfare agents (CWAs) are extremely harmful to the living organisms. Their efficient detection and removal in a limited time span are essential for the human health and environmental security. Twisted nanographenes have great applications in the fields of energy storage and optoelectronics, but their use as sensors is rarely described. Therefore, we have explored the sensitivity and selectivity of twisted nanographene analogues (C₃₂H₁₆, C₆₄H₃₂) towards selected toxic CWAs, including phosgene, thiophosgene and formaldehyde. The interaction between CWAs and twisted nanographenes is mainly interpreted by considering the optimized geometries, adsorption energies, natural bond orbital (NBO), frontier molecular orbital (FMO), non-covalent interaction (NCI) and quantum theory of atoms in molecules (QTAIM) analyses. The structural geometries show that the central octagon of twisted nanographenes is the most favorable site of interaction. The interaction energies reveal the physisorption of selected CWAs on tNGs surface. The average energy gap change (%E_H-L^a) and % sensitivity are quantitatively determined to evaluate the sensing capability of the twisted nanographenes. Among the selected CWAs molecules, the sensitivity of tNG analogues (C₃₂H₁₆ and C₆₄H₃₂) is superior towards thiophosgene (ThP), which is revealed by the high interaction energies of -8.19 and - 12.17 kcal/mol, respectively. This theoretical study will help experimentalists to devise novel sensors based on twisted nanographenes for the detection of toxic CWAs which may also work efficiently under the humid conditions.

Demonstrating the Potential of Alkali Metal-Doped Cyclic C6O6Li6 Organometallics as Electrides and High-Performance NLO Materials

In this report, the geometric and electronic properties and static and dynamic hyperpolarizabilities of alkali metal-doped C6O6Li6 organometallics are analyzed via density functional theory methods. The thermal stability of the considered complexes is examined through interaction energy (E int) calculations. Doping of alkali metal derives diffuse excess electrons, which generate the electride characteristics in the respective systems (electrons@complexant, e-@M@C6O6Li6, M = Li, Na, and K). The electronic density shifting is also supported by natural bond orbital charge analysis. These electrides are further investigated for their nonlinear optical (NLO) responses through static and dynamic hyperpolarizability analyses. The potassium-doped C6O6Li6 (K@C6O6Li6) complex has high values of second- (βtot = 2.9 × 105 au) and third-order NLO responses (γtot = 1.6 × 108 au) along with a high refractive index at 1064 nm, indicating that the NLO response of the corresponding complex increases at a higher wavelength. UV-vis absorption analysis is used to confirm the electronic excitations, which occur from the metal toward C6O6Li6. We assume that these newly designed organometallic electrides can be used in optical and optoelectronic fields for achieving better second-harmonic-generation-based NLO materials.

Monolayer Twisted Graphene-Based Schottky Transistor

The outstanding properties of graphene-based components, such as twisted graphene, motivates nanoelectronic researchers to focus on their applications in device technology. Twisted graphene as a new class of graphene structures is investigated in the platform of transistor application in this research study. Therefore, its geometry effect on Schottky transistor operation is analyzed and the relationship between the diameter of twist and number of twists are explored. A metal–semiconductor–metal twisted graphene-based junction as a Schottky transistor is considered. By employing the dispersion relation and quantum tunneling the variation of transistor performance under channel length, the diameter of twisted graphene, and the number of twists deviation are studied. The results show that twisted graphene with a smaller diameter affects the efficiency of twisted graphene-based Schottky transistors. Additionally, as another main characteristic, the I_D-V_GS is explored, which indicates that the threshold voltage is increased by diameter and number of twists in this type of transistor.

Zipper phosphorene as sensing element towards formaldehyde and acetaldehyde - A first-principles insight

We ascertained the structural stability of zipper phosphorene nanosheet (zP-NS) and studied the adsorption behaviour of toxic aldehyde compounds including formaldehyde (FD) and acetaldehyde (AD) on zP-NS based on first-principles calculation. Considerably, zP-NS reveal a semiconducting character with band gap of 1.35 eV. Especially, four distinct favourable adsorption positions including bridge-, hollow-, top- and valley-site of FD and AD vapours on zP-NS were investigated. Furthermore, the calculated binding-energy of prominent adsorption sites are observed to be in the scope of -0.143 eV to -0.411 eV advocating physisorption nature of the interaction of chief aldehydes on zP-NS. The overall outcomes recommend that zP-NS can be persuasively utilised as a chemical sensor for monitoring FD and AD molecules in indoor air environment.