II-VI core/shell quantum dots and doping with transition metal ions as a means of tuning the magnetoelectronic properties of CdS/ZnS core/shell QDs: A DFT study

CdSe/ZnS quantum dots as a booster in the active layer of distributed ternary organic photovoltaics

Organic solar cells are a promising candidate for practical use because of their low material cost and simple production procedures. The challenge is selecting materials with the right properties and how they interrelate in the context of manufacturing the device. This paper presents studies on CdSe/ZnS nanodots as dopants in a polymer-fullerene matrix for application in organic solar cells. An assembly of poly(3-hexylthiophene-2,5-diyl) and 6,6-phenyl-C71-butyric acid methyl ester was used as the active reference layer. Absorption and luminescence spectra as well as the dispersion relations of refractive indices and extinction coefficient were investigated. The morphologies of the thin films were studied with atomic force microscopy. The chemical boundaries of the ternary layers were determined by Raman spectroscopy. Based on UPS studies, the energy diagram of the potential devices was determined. The resistivity of the layers was determined using impedance spectroscopy. Simulations (General-Purpose Photovoltaic Device Model) showed a performance improvement in the cells with quantum dots of 0.36-1.45% compared to those without quantum dots.

A Review on Multiple I-III-VI Quantum Dots: Preparation and Enhanced Luminescence Properties

I-III-VI type QDs have unique optoelectronic properties such as low toxicity, tunable bandgaps, large Stokes shifts and a long photoluminescence lifetime, and their emission range can be continuously tuned in the visible to near-infrared light region by changing their chemical composition. Moreover, they can avoid the use of heavy metal elements such as Cd, Hg and Pb and highly toxic anions, i.e., Se, Te, P and As. These advantages make them promising candidates to replace traditional binary QDs in applications such as light-emitting diodes, solar cells, photodetectors, bioimaging fields, etc. Compared with binary QDs, multiple QDs contain many different types of metal ions. Therefore, the problem of different reaction rates between the metal ions arises, causing more defects inside the crystal and poor fluorescence properties of QDs, which can be effectively improved by doping metal ions (Zn²⁺, Mn²⁺ and Cu⁺) or surface coating. In this review, the luminous mechanism of I-III-VI type QDs based on their structure and composition is introduced. Meanwhile, we focus on the various synthesis methods and improvement strategies like metal ion doping and surface coating from recent years. The primary applications in the field of optoelectronics are also summarized. Finally, a perspective on the challenges and future perspectives of I-III-VI type QDs is proposed as well.

Compatibility and Interaction Mechanism between the C4F7N/CO2/O2 Gas Mixture and FKM and NBR

The C₄F₇N/CO₂/O₂ gas mixture received a great deal of attention for its potential use in eco-friendly gas-insulated equipment (GIE). The evaluation of the compatibility between C₄F₇N/CO₂/O₂ and sealing rubber is necessary and significant considering the high working pressure (0.14-0.6 MPa) of GIE. Herein, we explored the compatibility between C₄F₇N/CO₂/O₂ and fluororubber (FKM) and nitrile butadiene rubber (NBR) for the first time by analyzing the gas components, rubber morphology, elemental composition, and mechanical properties. The interaction mechanism of the gas-rubber interface was further investigated based on the density functional theory. We found that C₄F₇N/CO₂/O₂ is compatible with FKM and NBR at 85 °C, while the surface morphology changed at 100 °C, with white granular and agglomerated lumps appearing on FKM and multi-layer flakes being generated on NBR. The accumulation of the fluorine element occurred, and the compressive mechanical properties of NBR deteriorated after the gas-solid rubber interaction. Overall, the compatibility between FKM and C₄F₇N/CO₂/O₂ is superior, which could be employed as the sealing material for C₄F₇N-based GIE.

Copper-Modified Double-Emission Carbon Dots for Rapid Detection of Thiophanate Methyl in Food

The detection of food safety and quality is very significant throughout the food supply. Stable dual-emission copper-modified fluorescent carbon dots (Cu-CDs) were successfully synthesized by a simple and environment-friendly hydrothermal, which was used for the real-time detection of pesticide residues in agricultural products. By optimizing the reaction conditions, Cu-CDs showed two emission peaks, with the highest fluorescence intensities at 375 and 450 nm. The structure, chemical composition and optical properties of Cu-CDs were investigated by XRD, TEM and IR. The results showed that thiophanate methyl (TM) could induce fluorescence quenching of Cu-CDs with no other ligands by the electron transfer through π-π stacking. The synchronous response of the dual-emission sensor enhanced the specificity of TM, which showed remarkable anti-interference capability. The fluorescence quenching degree of Cu-CDs had a good linear relationship with the TM concentration; the low detection limit for a pear was 0.75 μM, and for an apple, 0.78 μM. The recoveries in the fruit samples were 79.70–91.15% and 81.20–93.55%, respectively, and the relative standard deviations (RSDs) were less than 4.23% for the pear and less than 3.78% for the apple. Thus, our results indicate the feasibility and reliability of our methods in detecting pesticide residues in agricultural products.

Core-Shell Engineered WO3 Architectures: Recent Advances from Design to Applications

Ongoing efforts to design novel materials with efficient structure-property-performance relations prove challenging. Core-shell structures have emerged as novel materials with controlled production routes and highly tailorable properties that offer extensive advantages in advanced oxidation processing, particularly in photocatalysis and photoelectrochemical applications. WO₃ , which is an optoelectronically active semiconductor material, is a popular material in current studies in the field of photo(electro)catalysis. Considerable progress has been made using core-shell WO₃ architectures, which warrants an evaluation in terms of processing and preparedness for their use in versatile catalytic and energy storage applications. This paper presents an in-depth assessment of core-shell WO₃ architectures by highlighting the design challenges and protocols in powder and thin-film chemical processing. The development of specific core-shell designs for use in targeted applications, such as H₂ production, CO₂ reduction, wastewater treatment, batteries, supercapacitors, and sensing, is analyzed. The fundamental role of WO₃ in core-shell structures to enhance efficiency is also discussed, along with the limitations and improvement strategies. Further, the prospects of core-shell WO₃ architectures in energy conversion and environmental applications are suggested.