The effect of compressive force combined with mechanical vibration on human alveolar bone osteoblasts

Involvement of RAMP1/p38MAPK signaling pathway in osteoblast differentiation in response to mechanical stimulation: a preliminary study

OBJECTIVE

The present study aimed to investigate the underlying mechanism of mechanical stimulation in regulating osteogenic differentiation.

MATERIALS AND METHODS

Osteoblasts were exposed to compressive force (0-4 g/cm2) for 1-3 days or CGRP for 1 or 3 days. Expression of receptor activity modifying protein 1 (RAMP1), the transcription factor RUNX2, osteocalcin, p38 and p-p38 were analyzed by western blotting. Calcium mineralization was analyzed by alizarin red straining.

RESULTS

Using compressive force treatments, low magnitudes (1 and 2 g/cm2) of compressive force for 24 h promoted osteoblast differentiation and mineral deposition whereas higher magnitudes (3 and 4 g/cm2) did not produce osteogenic effect. Through western blot assay, we observed that the receptor activity-modifying protein 1 (RAMP1) expression was upregulated, and p38 mitogen-activated protein kinase (MAPK) was phosphorylated during low magnitudes compressive force-promoted osteoblast differentiation. Further investigation of a calcitonin gene-related peptide (CGRP) peptide incubation, a ligand for RAMP1, showed that CGRP at concentration of 25 and 50 ng/ml could increase expression levels of RUNX2 and osteocalcin, and percentage of mineralization, suggesting its osteogenic potential. In addition, with the same conditions, CGRP also significantly upregulated RAMP1 and phosphorylated p38 expression levels. Also, the combination of compressive forces (1 and 2 g/cm2) with 50 ng/ml CGRP trended to increase RAMP1 expression, p38 activity, and osteogenic marker RUNX2 levels, as well as percentage of mineralization compared to compressive force alone. This suggest that RAMP1 possibly acts as an upstream regulator of p38 signaling during osteogenic differentiation.

CONCLUSION

These findings suggest that CGRP-RAMP1/p38MAPK signaling implicates in osteoblast differentiation in response to optimal magnitude of compressive force. This study helps to define the underlying mechanism of compressive stimulation and may also enhance the application of compressive stimulation or CGRP peptide as an alternative approach for accelerating tooth movement in orthodontic treatment.

Acupotomy inhibits aberrant formation of subchondral bone through regulating osteoprotegerin/receptor activator of nuclear factor-κB ligand pathway in rabbits with knee osteoarthritis induced by modified Videman method

OBJECTIVE

To investigate the effects of acupotomy on inhibiting abnormal formation of subchondral bone in rabbits with knee osteoarthritis (KOA).

METHODS

A total of 24 New Zealand rabbits were randomly divided into four groups of 6 rabbits each [control, model, electroacupuncture (EA) and acupotomy]. Eighteen KOA model rabbits were established using a modified Videman method. Rabbits in EA and acupotomy groups received the intervention for 3 weeks. Then, the cartilage and subchondral bone unit were obtained and the histomorphological changes were recorded. Osteo-protegerin (OPG) and receptor activator of nuclear factor-κB ligand (RANKL) in subchondral bone were evaluated by Western blotting, real-time polymerase chain reaction and immunohistochemistry.

RESULTS

Compared with the model group, both the acupotomy and EA groups showed a significant decrease in the Lequesne index (both 0.01) and Mankin score ( 0.01, < 0.05). In addition, both EA and acupotomy groups had a higher expression of total articular cartilage (TAC) ( 0.05, < 0.01) and lower expression of articular calcified cartilage (ACC)/TAC ( 0.05, < 0.05) compared with the model group. The thickness of the subchondral bone plate in EA and acupotomy groups were decreased (both 0.01) compared to the model group. Moreover, trabecular bone volume (BV/TV), protein and relative expression of OPG and the ratio of OPG/RANKL in the subchondral bone of acupotomy group were decreased statistically significant, while these parameters were not significantly changed in the EA group compared with the model group.

CONCLUSIONS

In the rabbit model of KOA, acupotomy inhibits aberrant formation of subchondral bone by suppressing OPG/RANKL ratio as a potential therapy for KOA.

Effects of compressive stress combined with mechanical vibration on osteoclastogenesis in RAW 264.7 cells

OBJECTIVES

To investigate the effects of compressive force and/or mechanical vibration on NFATc1, DCSTAMP, and CTSK (cathepsin K) gene expression and the number of tartrate-resistant acid phosphatase (TRAP)-positive multinucleated cells in RAW 264.7 cells, a murine osteoclastic-like cell line.

MATERIALS AND METHODS

RAW 264.7 cells were subjected to mechanical vibration, compressive force, or compressive force combined with vibration. Cell viability and the numbers of TRAP-positive multinucleated cells were evaluated. NFATc1, DCSTAMP, and CTSK gene expressions were analyzed using real-time quantitative reverse transcription polymerase chain reaction.

RESULTS

Compressive force combined with mechanical vibration significantly increased the numbers of TRAP-positive multinucleated cells but did not significantly affect cell viability. In addition, compressive force combined with mechanical vibration significantly increased NFATc1, DCSTAMP, and CTSK mRNA expression compared with compressive force or vibration alone.

CONCLUSIONS

Compressive force combined with mechanical vibration induces osteoclastogenesis and upregulates NFATc1, DCSTAMP, and CTSK gene expression in RAW 264.7 cells. These results provide more insight into the mechanisms by which vibratory force accelerates orthodontic tooth movement.

EFFECTIVENESS OF VIBRATION (CYCLIC LOADING) IN ACCELERATING BONE REMODELING AND ORTHODONTIC TOOTH MOOVEMENT: A SHORT REVIEW

This paper assesses the effectiveness of vibration in accelerating bone remodeling and orthodontic tooth movement. Databases of PubMed, Web of Science, and ScienceDirect were searched from January 2017 to March 2019 for randomized or quasi-randomized controlled trials that evaluated the effectiveness of vibration in accelerating bone remodeling and orthodontic tooth movement. The inclusion criteria were as follows: (i) studies that assessed the efficacy of vibration (cyclic loading) in bone remodeling and orthodontic tooth movement and (ii) those that employed groupings (experimental vs. control/placebo groups) on the basis of the use of vibration (cyclic loading). Eight clinical trials were included in this short review. Five studies met the eligibility criteria for bone remodeling and orthodontic tooth movement. Four studies found that low-magnitude high-frequency vibration could accelerate bone remodeling. However, contradictory results were obtained with regard to the acceleration of orthodontic tooth movement by vibration in human participants. Low-magnitude high-frequency vibration can accelerate bone remodeling and orthodontic tooth movement. However, this acceleration is dependent on the magnitude and frequency. Further research is necessary to determine the most feasible protocols for investigating the effects of magnitude and frequency of vibration on the acceleration of orthodontic tooth movement in human participants.

Impact of Vibration on the Levels of Biomarkers: A Systematic Review

Introduction:

The objective of this systematic review is to assess the effect of vibrational force on biomarkers for orthodontic tooth movement.

Methods:

An electronic search was conducted for relevant studies (up to December 31, 2020) on the following databases: Pubmed, Google scholar, Web of Science, Cochrane Library, Wiley Library, and ProQuest Dissertation Abstracts and Thesis database. Hand searching of selected orthodontic journals was also undertaken. The selected studies were assessed for the risk of bias in Cochrane collaboration risk of bias tool. The “traffic plot” and “weighted plot” risk of bias distribution are designed in the RoB 2 tool. The 2 authors extracted the data and analyzed it.

Results:

Six studies fulfilled the inclusion criteria. The risks of biases were high for 4, low and some concern for other 2 studies. The biomarkers, medium, device, frequency and duration of device, as well as other data were extracted. The outcomes of the studies were found to be heterogenous.

Conclusion:

One study showed highly statistically significant levels of IL-1 beta with <.001. Rate of tooth movement was correlated with levels of released biomarkers under the influence of vibrational force in 3 studies, but it was found to be significant only in 1 study. It was further observed that vibration does not have any significant reduction in pain and discomfort.

Vibration synergistically enhances IL-1β and TNF-α in compressed human periodontal ligament cells in the frequency-dependent manner

Objectives

To investigate whether mechanical vibration at 30 or 60 Hz combined with compressive force alter IL-1β and TNF-α expression in human periodontal ligament (hPDL) cells.

Methods

hPDL cells isolated from the roots of first premolar teeth extracted from four independent donors were cultured and exposed to vibration (0.3 g, 20 min per cycle, every 24 h for 3 cycles) at 30 or 60 Hz (V30 or V60), 2.0 g/cm² compressive force for 2 days (CF), or a combination of compressive force and vibration at 30 Hz or 60 Hz (V30CF or V60CF). Quantitative real-time polymerase chain reaction (qPCR) and enzyme-linked immunosorbent assays (ELISAs) were used to determine IL-1β and TNF-α mRNA and protein, respectively.

Results

The levels of IL-1β and TNF-α did not alter in groups V30 and V60. While, they were upregulated in groups CF, V30CF and V60CF. In addition, IL-1β mRNA and TNF-α mRNA and protein were expressed at significantly higher levels in group V30CF compared to CF group. However, IL-1β protein levels between V30CF and CF groups did not reach statistical significance.

Conclusions

30 Hz vibration had the synergistic effects with compressive force on the upregulation of IL-1β mRNA and TNF-α mRNA and protein in PDL cells, while 60 Hz vibration did not have this synergistic effect.

Mandible and iliac osteoblasts exhibit different Wnt signaling responses to LMHF vibration

Objective

The jaw bones and long bones have distinct developmental origins and respond differently to mechanical stimuli. This study aimed to compare the Wnt signaling responses of human mandible osteoblasts and long bone osteoblasts to low-magnitude, high-frequency (LMHF) mechanical vibration in vitro.

Methods

Primary human osteoblast cultures were prepared from mandibular bone (n = 3) and iliac bone (n = 3) specimens (six individuals). Osteoblast cell lines were subjected to vibration (0, 30, 60, 90, or 120 Hz) for 30 min. After 24 h, cells were vibrated for 30 min again, then harvested immediately to quantify Wnt10b, Wnt5a and runt-related transcription factor 2 (RUNX2) mRNA expression, β-catenin protein expression and alkaline phosphatase (ALP) activity.

Results

Mandible and iliac osteoblasts responded differently to LMHF vibration: Wnt10b mRNA was upregulated by the frequency range tested; Wnt5a, β-catenin protein expression and RUNX2 mRNA expression were not altered. Furthermore, vibration upregulated ALP activity in mandible osteoblasts, but not in iliac osteoblasts.

Conclusions

This study demonstrates mandible osteoblasts and long bone osteoblasts respond differently to LMHF mechanical vibration in terms of Wnt signaling expression and ALP activity. Therefore, the effects of whole-body vibration on the long bones cannot be generalized to the jaw bones. Furthermore, osteoblast-like cells mediate the cellular responses to vibration, at least in part, by secreting extracellular signaling molecules.

Effect of high-frequency vibration on orthodontic tooth movement and bone density

OBJECTIVES:

Previous reports have shown that high-frequency vibration can increase bone remodeling and accelerate tooth movement. The aim of this study was to evaluate the effects of high-frequency vibration on treatment phase tooth movement, and post-treatment bone density at initiation of retention, with cone-beam computed tomography (CBCT).

MATERIALS AND METHODS:

Thirty patients with initial Class I skeletal relationships, initial minimum-moderate crowding (3–5 mm), treated to completion with clear aligners and adjunctive high-frequency vibration, (HFV group) or no vibration, (Control group) were evaluated. The patients were instructed to change aligners as soon as they become loose. Changes in bone density associated with orthodontic treatment were evaluated using i-CAT cone-beam computed tomography (CBCT) and InVivo Anatomage^® software to quantify density using Hounsfield units (HU) between treated teeth in 10 different regions. HU values were averaged and compared against baseline (T1) and between the groups at initiation of retention (T2).

RESULTS:

The average time for aligner change was 5.2 days in the HFV group, and 8.7 days in the control group (P = 0.0001). There was significant T1 to T2 increase of HU values in the upper arch (P = 0.0001) and the lower arch (P = 0.008) in the HFV group. There was no significant change in average HU values in the upper (P = 0.83) or lower arches (P = 0.33) in the control group. The intergroup comparison revealed a significant difference in the upper, (P = 0.0001) and lower arches (P = 0.007).

CONCLUSION:

High-frequency vibration adjunctive to clear aligners, allowed early aligner changes that led to shorter treatment time in minimum-moderate crowded cases. At initiation of retention, the HFV group demonstrated statistically significant increase as compared with pre-treatment bone density, whereas control subjects showed no significant change from pre-treatment bone density.