Comparative evaluation of sealing ability of gutta percha and resilon as root canal filling materials- a systematic review

The Push-Out Bond Strength, Surface Roughness, and Antimicrobial Properties of Endodontic Bioceramic Sealers Supplemented with Silver Nanoparticles

This study evaluated push-out bond test (POBT), surface roughness, and antimicrobial properties against Enterococcus faecalis of bioceramic sealers supplemented with silver nanoparticles (AgNPs). The sealers tested were CeraSeal®, EndoSequence® BC SealerTM, and Bio-C® Sealer. The POBT was measured with a Universal Testing Machine, and the type of failure was evaluated with a stereomicroscope. The roughness average (Sa) and peak-valley height (Sy) values were evaluated by atomic force microscopy. The bacterial growth inhibition was evaluated using a disk diffusion test, and antimicrobial activity was determined with the plate microdilution method. The POBT showed no significant difference between sealers with and those without NPs in cervical and apical thirds (p > 0.05). In the middle third, the adhesion force was significant for Endosequence BC Sealer® (p < 0.05). The results showed that the Sa and Sy parameters, when AgNPs were added, did not show a statistically significant difference compared to the groups without nanoparticles (p > 0.05). All tested sealers showed bacterial growth inhibition, but no significant difference was found. Their efficacy, in descending order of antibacterial activity when AgNPs were added, is as follows: EndoSequence® BC SealerTM > Bio-C® Sealer > CeraSeal®. The incorporation of AgNPs into bioceramics improves antimicrobial activity without affecting mechanical properties.

Evaluation of Immediate and Delayed Placement of Post on Sealing ability of Periapical Area: An Original Research

Objective

The purpose of this research is to compare the effects of post placement-immediate and delayed-on the periapical area's capacity to close after root canal therapy (RCT).

Techniques

A random split of sixty recently removed human single-rooted teeth was made into two groups: Group A received immediate post placement, whereas Group B received post placement after seven days. Standard guidelines were followed in the preparation of root canals and the placement of posts. A dye penetration method was used to measure microleakage, a measure of sealing capacity.

Findings

Compared to the immediate post placement group (0.62 ± 0.08) (P < 0.001), the delayed post placement group had a considerably lower mean microleakage score (0.35 ± 0.06), showing improved sealing capacity. In conclusion, post implantation done later enhances the periapical area's sealing capacity after RCT. This research underscores the significance of scheduling endodontic treatments to maximize treatment success and improve tooth retention, as well as the possible therapeutic advantages of postponing post implantation.

Evaluation of Immediate and Delayed Placement of Post on Sealing Ability of Periapical Area: An Original Research

Objective

The purpose of this research is to compare the effects of post placement-immediate and delayed-on the periapical area's capacity to close after root canal therapy.

Techniques

A random split of 60 recently removed human single-rooted teeth were made into two groups: Group A received immediate post placement, whereas Group B received post placement after seven days. Standard guidelines were followed in the preparation of root canals and the placement of posts. A dye penetration method was used to measure microleakage, a measure of sealing capacity.

Findings

Compared to the immediate post-placement group (0.62 ± 0.08) (P < 0.001), the delayed post-placement group had a considerably lower mean microleakage score (0.35 ± 0.06), showing improved sealing capacity. In conclusion, post implantation done later enhances the periapical area's sealing capacity after root canal therapy. This research underscores the significance of scheduling endodontic treatments to maximize treatment success and improve tooth retention, as well as the possible therapeutic advantages of postponing post implantation.

The efficacy of 3 root canal sealers combined with warm gutta-percha vertical compression technique in the treatment of dental pulp disease

To investigate the efficacy of 3 root canal sealants such as AH Plus, GuttaFlow and iRoot SP combined with warm gutta-percha vertical compression technique in the treatment of dental pulp disease. This was a single-center retrospective study. 180 patients with dental pulp disease were divided into AH Plus group (n = 60), GuttaFlow group (n = 60) and iRoot SP group (n = 60) according to the different treatment methods. Patients in different groups were treated with corresponding root canal sealant combined with warm gutta-percha vertical compression technique. The quality of root canal filling, filling time, filling area ratio, the incidence of pain after operation, serum interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α) and efficacy at 6 months after operation were compared among the 3 groups, respectively. The filling time in the GuttaFlow group and the iRoot SP group was significantly shorter than that in the AH Plus group (P < .001). There were significant differences in pain grade (P = .015) and pain rate (P = .016) among the 3 groups, and the pain rate in the GuttaFlow group and the iRoot SP group was significantly lower than that in the AH Plus group (P = .016). The time-point effect, intergroup effect and time-groups effect of serum TNF-α and IL-6 were significantly different (P < .001), and the levels of the 3 groups after treatment were significantly lower than those before treatment (P < .05), and the levels were significantly lower in the GuttaFlow group and the iRoot SP group (P < .05). There were significant differences in efficacy grading and effective rate among the 3 groups (P = .028), and the effective rate of iRoot SP group was significantly higher than that of AH Plus group (P < .05). The iRoot SP or GuttaFlow as root canal sealant combined with warm gutta-percha vertical compression technique in the treatment of dental pulp disease is better than AH Plus, and the former one can shorten the filling time, relieve the postoperative pain and improve the inflammatory response, but the long-term apical sealing effect of iRoot SP is better than GuttaFlow.

Effectiveness of H-files and Pro-Taper universal systems in removing Gutta-percha during endodontic retreatment: A comparative study

Objective

This research was aimed at assessing the effectiveness of manual H-files versus a combination of a Pro-Taper universal rotary canal preparation system and retreatment system in removing gutta-percha (GP) during endodontic retreatment, by using a digital radiography technique.

Methods

This ex vivo study used a non-probability consecutive sampling technique. The study sample comprised 60 extracted anterior permanent teeth, each with one root with a straight root canal (RC). After preparation, RCs were obturated with GP and sealer. Subsequently, teeth were stored for 2 weeks in a humid environment at 37 °C. Thirty teeth each were randomly assigned to the control (group I), and experimental (group II) groups. GP removal was performed with H-files {group I) or a combination of a Pro-Taper universal rotary canal preparation system and retreatment system (group 2). Digital radiographs were acquired with Carestream digital radiovisiography software (Kodak; version-VER.6.10.8.3-A), and the presence of residual GP was analyzed. AutoCAD (2006) software was used to demarcate the RC and residual root filling. The residual GP in both groups was compared with independent sample t-tests.

Results

The remaining root filling did not significantly differ when GP was removed with conventional Hedstrom files versus a combination of Pro-Taper Universal preparation and retreatment file systems. The residual GP was confined to the apical third of the canals in both groups.

Conclusions

Pro-Taper Universal preparation and retreatment file systems have similar effectiveness to manual H-files in GP removal in straight canals.

Bioceramic versus traditional biomaterials for endodontic sealers according to the ideal properties

Odontology, as a scientific discipline, continuously collaborates with biomaterials engineering to enhance treatment characteristics and patients' satisfaction. Endodontics, a specialized field of dentistry, focuses on the study, diagnosis, prevention, and treatment of dental disorders affecting the dental pulp, root, and surrounding tissues. A critical aspect of endodontic treatment involves the careful selection of an appropriate endodontic sealer for clinical use, as it significantly influences treatment outcomes. Traditional sealers, such as zinc oxide-eugenol, fatty acid, salicylate, epoxy resin, silicone, and methacrylate resin systems, have been extensively used for decades. However, advancements in endodontics have given rise to bioceramic-based sealers, offering improved properties and addressing new challenges in endodontic therapy. In this review, a classification of these materials and their ideal properties are presented to provide evidence-based guidance to clinicians. Physicochemical properties, including sealing ability, stability over time and space, as well as biological properties such as biocompatibility and antibacterial characteristics, along with cost-effectiveness, are essential factors influencing clinicians' decisions based on individual patient evaluations.

Evaluation of Antibacterial Effect of New Sealer "Neoseal" and Two Commercially Used Endodontic Sealers against Enterococcus faecalis: An In Vitro Study

AIM

To evaluate the antibacterial activity of three endodontic sealing materials, Neoseal, CeraSeal, and AH Plus against Enterococcus faecalis bacteria in vitro.

MATERIALS AND METHODS

The antibacterial activity of three endodontic sealing materials including two bioceramic sealers; NeoSEALER Flo (group I), CeraSeal (group II), and one epoxy resin sealer; AH Plus (group III) was investigated against E. faecalis bacteria American Type Cell Culture Collection (ATCC) 29212 (ATCC, Rockville, Maryland, USA). Using modified direct contact test (MDCT). The endodontic sealers were tested in contact with bacterial suspension when unset (20 minutes after mixing) and after setting, assessing the antibacterial activity of aged sealers after 1, 3, 7, and 14 days. Analyzing the collected data has been done with version 25.0 of the statistical package for the social sciences (SPSS) IBM software (SPSS, Chicago, Illinois, USA). Descriptive analyses were calculated using standard deviation (SD) and mean. Shapiro-Wilk test was done to detect the normality of the result values. Kruskal-Wallis test was then performed to test the level of significance between groups.

RESULTS

After 20 minutes - Group I showed higher bacterial count mean values (5,500 ± 500) and 0 values for groups II and III groups. After 1 day, the highest bacterial count mean values were in group III (54,333.3 ± 4,041.5) and 0 values for groups I and II. After 3 days - group III again recorded the highest bacterial count mean values (45,000 ± 5,000) and 0 values for I and II groups. After 7 days - Group III still recorded the highest bacterial count mean values (53,333.3 ± 1,527.5) and 0 values for groups I and II. After 14 days - Group III recorded the highest bacterial count mean values (56,000 ± 1,000) followed by group II (6,333.3 ± 577.4), and the least was group I (2,000 ± 500). Kruskal-Wallis test showed significant values between groups in all tested durations, p > 0.05.

CONCLUSION

The sealing material AH Plus showed a strong bactericidal effect at the beginning but lost its ability after 24 hours. CeraSeal showed strong bactericidal activity from the beginning till the end of the first week but showed bacterial count at 14 days. Neoseal took 24 hours to show bactericidal effect and similar to CeraSeal showed bacterial count at 14 days; CeraSeal recorded the best results within the study.

CLINICAL SIGNIFICANCE

Silicate-based (bioceramic) endodontic sealers can be the best available endodontic sealing material that is clinically beneficial in removing residual microbes which had survived irrigation protocols and chemomechanical preparation. How to cite this article: Basta DG, Reslan MR, Rayyan M, et al. Evaluation of Antibacterial Effect of New Sealer "Neoseal" and Two Commercially Used Endodontic Sealers against Enterococcus faecalis: An In Vitro Study. J Contemp Dent Pract 2023;24(11):871-876.

Effectiveness of root canal filling materials and techniques for treatment of apical periodontitis: A systematic review

BACKGROUND

Apical periodontitis (AP) is an inflammatory disease of the apical periodontium as sequelae of pulp death. It is managed by disinfection and filling of the root canal space.

OBJECTIVES

The aim of this systematic review was to investigate whether obturation techniques and materials used for root canal filling led to the management of AP.

METHODS

A systematic review protocol was written following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) checklist and registered on the international prospective register of systematic reviews (PROSPERO; CRD42021260275) including two populations, interventions, comparisons, outcomes and time (PICOT) for the research questions querying the effectiveness of obturation techniques (PICOT 1) and materials (PICOT 2) for the management of AP. Electronic searches were conducted on PubMed, ScienceDirect, Scopus and Embase search engines. Searches on International Endodontic Journal, Journal of Endodontics, Clinical Oral Investigations, Journal of Dental Research and Journal of Dentistry websites were also conducted, until May 2021. Both primary (tooth survival) and secondary outcomes were evaluated. The risk of bias was assessed by Cochrane RoB2 for the randomized and ROBINS-I for the nonrandomized trials.

RESULTS

The search strategy identified 1652 studies, with 1600 excluded on the title and abstract screening, leaving 52 studies for full-text screening. In total, 10 studies met the inclusion criteria. The obturation technique and materials used did not affect the outcome of AP. Vertical compaction resulted in faster resolution of periapical lesions. The oral health-related quality of life of patients treated with lateral condensation exhibited poorer outcomes compared with single matched cone after 6 months of recall.

DISCUSSION

The inclusion and exclusion criteria used for this systematic review enabled the capture of all the literature available on the effect of obturation techniques and materials on the outcome of AP. The data were heterogenous, and a number of articles investigating obturation techniques had no information on the materials and techniques used as they looked at the quality of fill.

CONCLUSIONS

Included studies did not find any difference between different procedures (PICOT 1) and materials (PICOT 2). The risk of bias was high, thus the findings should be interpreted with caution.

REGISTRATION

PROSPERO registration number: CRD42021260275.

What Are the Chances of Resilon to Dominate the Market Filling Materials for Endodontics?

This paper is a literature review with additional virtual analyses of the authors’ own experimental research results. Knowledge from various areas was synergistically combined, appropriately for concurrent engineering, presenting several possible methodological approaches used in research, optimizing the selection of engineering materials and the conditions of their application with particular application in endodontics. Particular attention was paid to the theoretical aspects of filling material strengths, weaknesses, opportunities, and threats SWOT analysis. Attention was paid to the original concepts of Sustainable Dentistry Development in conjunction with Dentistry 4.0, which includes endodontics as an important element. The dentists’ actions, among others, in conservative dentistry, along with endodontics, requires close cooperation with engineers and the enginering sciences. Methods of root canal preparation were described, together with selected tools, including those made of nitinol. Principles concerning the process of cleaning and shaping the pulp complex are presented. The importance of obturation methods, including the Thermo-Hydraulic-Condensation THC technique, and the selection of filling materials with the necessary sealants for the success of endodontic treatment are discussed. The experimental studies were carried out in vitro on human teeth removed for medical reasons, except for caries, for which two groups of 16 teeth were separated. After the root canal was prepared, it was filled with studs and pellets of a filling material based on polyester materials, which has gained the common trade name of resilon or, less frequently, RealSeal (SybronEndo) with an epiphany sealant. The teeth for the first group were obturated by cold lateral condensation. In the second case the obturation was performed using the Thermo-Hydraulic-Condensation technique using System B and Obtura III. The experimental leakage testing was done using a scanning electron microscope SEM and a light stereoscopic microscope LSM, as typical research tools used in materialography. The research results, in a confrontation with the data taken from the literature studies, do not indicate the domination of resilon in endodontics.

Is Gutta-Percha Still the “Gold Standard” among Filling Materials in Endodontic Treatment?

The paper is an extensive monographic review of the literature, and also uses the results of the authors’ own experimental research illustrating the noticed developmental tendencies of the filling material based on gutta-percha. The whole body of literature proves the correctness of the research thesis that this material is the best currently that can be used in endodontics. Caries is one of the most common global infectious diseases. Since the dawn of humankind, the consequence of the disease has been the loss of dentition over time through dental extractions. Both tooth caries and tooth loss cause numerous complications and systemic diseases, which have a serious impact on insurance systems and on the well-being, quality, and length of human life. Endodontic treatment, which has been developing since 1836, is an alternative to tooth extraction. Based on an extensive literature review, the methodology of qualifying patients for endodontic treatment was analyzed. The importance of selecting filling material and techniques for the development and obturation of the root canal during endodontic treatment was described. Particular attention was paid to the materials science aspects and the sequence of phase transformations and precipitation processes, as well as the need to ensure the stoichiometric chemical composition of Ni–Ti alloys, and the vacuum metallurgical processes and material processing technologies for the effects of shape memory and superelasticity, which determine the suitability of tools made of this alloy for endodontic purposes. The phenomena accompanying the sterilization of such tools, limiting the relatively small number of times of their use, play an important role. The methods of root canal preparation and obturation methods through cold side condensation and thermoplastic methods, including the most modern of them, the thermo-hydraulic condensation (THC) technique, were analyzed. An important element of the research hypothesis was to prove the assumption that to optimize the technology of development and obturation of root canals, tests of filling effectiveness are identified by the density and size of the gaps between the root canal wall, and the filling methods used and devices appropriate for material research, using mainly microscopy such as light stereoscopic (LSM) and scanning electron (SEM). The most beneficial preparations were obtained by making a longitudinal breakthrough of 48 natural human teeth, extracted for medical reasons, different from caries, with compliance with all ethical principles in this field. The teeth were prepared using various methods and filled with multiple obturation techniques, using a virtual selection of experimental variants. The breakthroughs were made in liquid nitrogen after a one-sided incision with a narrow gap created by a diamond disc using a materialographic cutter. The best effectiveness of the root canal filling was ensured by the technology of preparing the root canals with K3 rotary nitinol tools and filling the teeth with the THC thermoplastic method using the System B and Obtura III devices with studs and pellets of filling material based on gutta-percha after covering the root canal walls with a thin layer of AH Plus sealant. In this way, the research thesis was confirmed.

Functional Dental Pulp Regeneration: Basic Research and Clinical Translation

Pulpal and periapical diseases account for a large proportion of dental visits, the current treatments for which are root canal therapy (RCT) and pulp revascularisation. Despite the clinical signs of full recovery and histological reconstruction, true regeneration of pulp tissues is still far from being achieved. The goal of regenerative endodontics is to promote normal pulp function recovery in inflamed or necrotic teeth that would result in true regeneration of the pulpodentinal complex. Recently, rapid progress has been made related to tissue engineering-mediated pulp regeneration, which combines stem cells, biomaterials, and growth factors. Since the successful isolation and characterisation of dental pulp stem cells (DPSCs) and other applicable dental mesenchymal stem cells, basic research and preclinical exploration of stem cell-mediated functional pulp regeneration via cell transplantation and cell homing have received considerably more attention. Some of this effort has translated into clinical therapeutic applications, bringing a ground-breaking revolution and a new perspective to the endodontic field. In this article, we retrospectively examined the current treatment status and clinical goals of pulpal and periapical diseases and scrutinized biological studies of functional pulp regeneration with a focus on DPSCs, biomaterials, and growth factors. Then, we reviewed preclinical experiments based on various animal models and research strategies. Finally, we summarised the current challenges encountered in preclinical or clinical regenerative applications and suggested promising solutions to address these challenges to guide tissue engineering-mediated clinical translation in the future.

Virtual Approach to the Comparative Analysis of Biomaterials Used in Endodontic Treatment

The importance of endodontics is presented within our own concept of Dentistry Sustainable Development (DSD) consisting of three inseparable elements; i.e., Advanced Interventionist Dentistry 4.0 (AID 4.0), Global Dental Prevention (GDP), and the Dentistry Safety System (DSS) as a polemic, with the hypothesis of the need to abandon interventionist dentistry in favour of the domination of dental prevention. In view of the numerous systemic complications of caries that affect 3−5 billion people globally, endodontic treatment effectively counteracts them. Regardless of this, the prevention of oral diseases should be developed very widely, and in many countries dental care should reach the poorest sections of society. The materials and methods of clinical management in endodontic procedures are characterized. The progress in the field of filling materials and techniques for the development and obturation of root canals is presented. The endodontics market is forecast to reach USD 2.1 billion in 2026, with a CAGR of 4.1%. The most widely used and recognized material for filling root canals is gutta-percha, recognized as the “gold standard”. An alternative is a synthetic thermoplastic filler material based on polyester materials, known mainly under the trade name Resilon. There are still sceptical opinions about the need to replace gutta-percha with this synthetic material, and many dentists still believe that this material cannot compete with gutta-percha. The results of studies carried out so far do not allow for the formulation of a substantively and ethically unambiguous view that gutta-percha should be replaced with another material. There is still insufficient clinical evidence to formulate firm opinions in this regard. In essence, materials and technologies used in endodontics do not differ from other groups of materials, which justifies using material engineering methodology for their research. Therefore, a detailed methodological approach is presented to objectify the assessment of endodontic treatment. Theoretical analysis was carried out using the methods of procedural benchmarking and comparative analysis with the use of contextual matrices to virtually optimize the selection of materials, techniques for the development and obturation of root canals, and methods for assessing the effectiveness of filling, which methods are usually used, e.g., in management science, and especially in foresight research as part of knowledge management. The results of these analyses are presented in the form of appropriate context matrices. The full usefulness of the research on the effectiveness and tightness of root canal filling using scanning electron microscopy is indicated. The analysis results are a practical application of the so-called “digital twins” approach concerning the virtual comparative analysis of biomaterials used in endodontic treatment.

Effect of Different Irrigation Solutions on the Diffusion of MTA Cement into the Root Canal Dentin

(1) Aim: This study aims to analyze the in vitro infiltration of a silicate root canal sealer into dentinal tubules after using different endodontic irrigating solutions. (2) Methods: Twenty-nine teeth with single roots were separated into three groups according to the final irrigation protocol: G1 n = 10) = 17% EDTA (ethylenediaminetetraacetic acid) + 3.0% sodium hypochlorite (NaOCl), G2 (n = 10) = 17% EDTA + 2.0% chlorhexidine and G3 (Control group, n = 9) = 17% EDTA + saline solution. Root canals were filled using cold lateral compaction technique with MTA Fillapex sealer and gutta-percha. The sealer was labeled with rhodamine B. The teeth were segmented at the middle and third apical sections, which were visualized using 10× confocal laser microscopy to determine the sealer penetration percentage. (3) Results: In the apical section, no statistically significant differences were found between the groups regarding sealer penetration. In the middle section, Group 1 obtained the highest percentage, and Group 2 the lowest (p = 0.004). Group 1 also presented statistically significant differences in the Control Group (p = 0.031) and had close sealer penetration values. Meanwhile, the Control Group (p = 0.023) and Group 2 (p = 0.029) revealed a significant decrease of sealer penetration between the apical and middle sections. (4) Conclusion: The obtained results support that final irrigation with NaOCl promoted similar sealer penetration in the apical and middle sections. On the other hand, a significant decrease in the sealer penetration of the middle section was observed for the chlorhexidine and saline groups. Compared to other irrigant solutions, NaOCl promotes more uniform sealer penetration, which can correlate with better sealing and, consequently, higher endodontic treatment success.