The effects of various additives on setting properties of MTA

Long-Term Evaluation of Pulp Vitality Preservation in Direct and Indirect Pulp Capping: A Retrospective Clinical Study

Background: This retrospective clinical study aimed to assess dental pulp tissue reactions to direct and indirect pulp capping after 10 years of follow-up. Methods: A total of 276 permanent teeth with deep carious lesions were evaluated and divided into five groups: Group (1), direct pulp capping with Mineral Trioxide Aggregate cement; Group (2), direct pulp capping with a resin-based glass ionomer; Group (3), direct pulp capping with TheraCal; Group (4), indirect pulp capping with a three-step total-etch adhesive system; and Group (5), indirect pulp capping with a two-step self-etch adhesive system. Results: A 72.5% success rate was achieved overall. A statistically significant difference was found when comparing direct and indirect pulp capping with a success rate of 23.8% and 93.8%, respectively. For direct pulp-capping procedures, the area of pulp exposure was correlated with pulp necrosis (p = 0.035), while bleeding after exposure appeared independent (p = 0.053). Patient age was significantly related to the maintenance of pulp vitality (p = 0.013). A statistically significant correlation between the pulp-capping material and the occurrence of pulp necrosis was discovered (p = 0.017). For the indirect pulp-capping treatments, a significant correlation between patient age (p = 0.021) and the adhesive system (p = 0.019) with pulp necrosis was described. Conclusions: The pulp-capping material, patient age, and the width of the pulp exposure before the procedure should be carefully considered when performing direct pulp-capping treatments. The performance of the etch-and-rinse adhesive systems was superior to the self-etch system during the indirect pulp-capping procedures.

Bacterial sealing ability of calcium silicate-based sealer for endodontic surgery: an in-vitro study

BACKGROUND

Apical surgery with standard retrograde maneuvers may be challenging in certain cases. Simplifying apical surgery to reduce operating time and streamline retrograde manipulation is an emerging need in clinical endodontics.

AIM OF THE STUDY

The aim of the study was to compare the bacterial sealing ability of a calcium silicate-based sealer with the single cone technique combined with root end resection only, and calcium silicate-based sealer as a retrograde filling versus MTA retrofilling, and to analyze bacterial viability using confocal laser scanning microscope (CLSM).

MATERIALS AND METHODS

In this in vitro experimental study, 50 extracted human maxillary incisor teeth were instrumented and randomly divided into five groups: three experimental groups, a positive control group, and a negative control group (n = 10/group). In the experimental groups, the roots were obturated using the single cone technique (SCT) and a calcium silicate-based sealer. In group 1, the roots were resected 3 mm from the apex with no further retrograde preparation or filling. In groups 2 and 3, the roots were resected, retroprepared, and retrofilled with either a calcium silicate-based sealer or MTA, respectively. Group 4 (positive control) was filled with a single gutta-percha cone without any sealer. In group 5 (negative control), the canals were left empty, and the roots were sealed with wax and nail varnish. A bacterial leakage model using Enterococcus faecalis was employed to assess the sealing ability over a 30-day period, checking for turbidity and analyzing colony forming units (CFUs) per milliliter. Five specimens from each group were examined using CLSM for bacterial viability. Data for the bacterial sealing ability were statistically analyzed using chi-squared and Kruskal-Wallis tests.

RESULTS

The three experimental groups did not show significant differences in terms of bacterial leakage, or bacterial counts (CFUs) (P > 0.05). However, significant differences were observed when comparing the experimental groups to the positive control group. Notably, the calcium silicate-based sealer, when used as a retrofilling, yielded the best sealing ability. CLSM imaging revealed viable bacterial penetration in all the positive control group specimens while for the experimental groups, dead bacteria was the prominent feature seen.

CONCLUSION

Within the limitations of this study, it could be concluded that the bacterial sealing ability of calcium silicate-based sealer with the single cone technique combined with root end resection only and calcium silicate-based sealer as a retrograde filling were comparable with MTA retrofilling during endodontic surgical procedures.

A Study on Nanoleakage of Apical Retrograde Filling of Premixed Calcium Silicate-Based Cement Using a Lid Technique

This study aimed to compare the nanoleakage of retrograde fillings with premixed calcium silicate-based putty and mineral trioxide aggregate (MTA), using two different techniques (traditional and Lid). Sixty-four extracted human teeth were decoronated, then root canals and ends were instrumented for retrograde filling and divided into four groups according to the retrograde filling technique: the traditional and the Lid technique. Each group (n = 15) was filled with Ceraseal + Well-Root putty, Well-Root putty, Ceraseal + ProRoot MTA, and ProRoot MTA. The nanoleakage was evaluated using the Nanoflow device (IB Systems) on days 1, 3, 7, 15 and 30. Data were collected twice per second at the nanoscale (nL/s) and calculated after archiving the stabilization of fluid flow. The Kruskal-Wallis and Mann-Whitney U-tests were used for statistical analysis. All groups showed enhanced sealing ability over time. Regardless of filling materials, the Well-Root putty, Ceraseal+Well-Root putty, and Ceraseal+ProRoot MTA groups indicated less nanoleakage than the ProRoot MTA group in the first week of evaluation (p < 0.05). Although all groups did not show significant differences after 2 weeks, the Ceraseal+ProRoot MTA group leaked less than ProRoot MTA on Days 3 and 7 (p < 0.05). The scanning electron microscopic examined good adaptation to the cavity wall, which was similar to nanoleakage results. Premixed calcium silicate-based putty retrograde filling material alone and using the "lid technique" were shown to be faster and less prone to nanoleakage when compared to MTA.

Novel self-setting cements based on tricalcium silicate/(β-tricalcium phosphate/monocalcium phosphate anhydrous)/hydroxypropyl methylcellulose: From hydration mechanism to biological evaluations

Despite the clinical success of tricalcium silicate (TCS)-based materials in endodontics, the inferior handling characteristic, poor anti-washout property and slow setting kinetics hindered their wider applications. To solve these problems, an injectable fast-setting TCS/β-tricalcium phosphate/monocalcium phosphate anhydrous (β-TCP/MCPA) cement was developed for the first time by incorporation of hydroxypropyl methylcellulose (HPMC) and β-TCP/MCPA. The physical-chemical characterization (setting time, anti-washout property, injectability, compressive strength, apatite mineralization and sealing property) of TCS/(β-TCP/MCPA) were conducted. Its hydration mechanism was also investigated. Furthermore, the cytocompatibility and osteogenic/odontogenic differentiation of stem cells isolated from human exfoliated deciduous teeth (SHED) treated with TCS/β-TCP/MCPA were studied. The results showed that HPMC could provide TCS with good anti-washout ability and injectability but slow hydration process. However, β-TCP/MCPA effectively enhanced anti-washout characteristics and reduced setting time due to faster hydration kinetics. TCS/(β-TCP/MCPA) obtained around 90 % of injection rate and high compressive strength whereas excessive additions of β-TCP/MCPA compromised its injectability and compressive strength. TCS/(β-TCP/MCPA) can induce apatite deposition and form a tight marginal sealing at the dentin-cement interface. Additionally, TCS/(β-TCP/MCPA) showed good biocompatibility and promoted osteo/odontogenic differentiation of SHED. In general, our results indicated that TCS/(β-TCP/MCPA) may be particularly promising as an injectable bioactive cements for endodontic treatment.

Assessment of sealing efficacy, radiopacity, and surface topography of a bioinspired polymer for perforation repair

Background

Root perforation repair presents a significant challenge in dentistry due to inherent limitations of existing materials. This study explored the potential of a novel polydopamine-based composite as a root repair material by evaluating its sealing efficacy, radiopacity, and surface topography.

Methods

Confocal microscopy assessed sealing ability, comparing the polydopamine-based composite to the gold standard, mineral trioxide aggregate (MTA). Radiopacity was evaluated using the aluminium step wedge technique conforming to ISO standards. Surface roughness analysis utilized atomic force microscopy (AFM), while field emission scanning electron microscopy (FESEM) visualized morphology.

Results

The polydopamine-based composite exhibited significantly superior sealing efficacy compared to MTA (P < 0.001). Radiopacity reached 3 mm aluminium equivalent, exceeding minimum clinical requirements. AFM analysis revealed a smooth surface topography, and FESEM confirmed successful composite synthesis.

Conclusion

This study demonstrates promising properties of the polydopamine-based composite for root perforation repair, including superior sealing efficacy, clinically relevant radiopacity, and smooth surface topography. Further investigation is warranted to assess its clinical viability and potential translation to endodontic practice.

Comparative evaluation of the antibacterial efficacy of two experimental calcium silicate-based intracanal medicaments: An in-vitro study

Introduction

Success of endodontic treatment relies on minimizing microbial load by chemo-mechanical preparation and intra-canal medication(ICM). Calcium hydroxide based ICMs have known disadvantages. Calcium silicate-based cements(CSC) exhibit antibacterial activity, thus promoting researchers to experiment with their formulations to use them as ICMs.

Aim

Evaluation and comparison of the antimicrobial efficacy of two experimental CSC (MTA & Biodentine + 2%chlorhexidine) and Bio-C Temp against E.faecalis.

Methods and Material

Test materials were divided into four groups namely Group1-Bio-C Temp, Group2-UltraCAL XS, Group3-Biodentine+2%CHX and Group4-MTA+2%CHX. Direct contact test was done by placing a standardized suspension of E.faecalis on test materials and bacterial growth was assessed spectrophotometrically using ELISA at one, three and seven days.

Statistical Analysis

Data was analysed using one-way ANOVA, Tukey's multiple post hoc test and paired-t test. Results: Intragroup comparison revealed decreased mean optical density(OD) in groups 1, 2, and 4; no significant difference in group 3. Intergroup comparison showed statistical differences in mean OD values between groups (3 and 4); groups (1 and 2) at days one(p-0.018) and three(p-0.035), but no difference individually. Group 4 showed the highest antimicrobial efficacy on day seven.

Conclusion

MTA+2%CHX & Biodentine+2%CHX showed better antimicrobial efficacy and hence could be used as potential ICMs.

Development of nanobiosilicate, tricalcium phosphate and chlorhexidine materials for biomineralization with crystallographic similarity to hydroxyapatite and biomodified collagen

OBJECTIVES

The aim of this work is to test experimental cements, doped with a silicate based bioactive nanoparticle (NanoBiosilicate). Methods, we synthesized a glass nanoparticle by Sol-Gel Stöber method, used to be incorporated in a dental material for endodontic uses.

MATERIALS AND METHODS

We assess the mineralizing properties and biocompatibility. Besides the crystallography characterization of the resultant new crystals. Results, After analysis, and comparison with commercial materials, the material tested was similar in mechanical properties required by ISO, The ion release was effective after 2 hr. of setting and the novel material was cell compatible accepted by ISO.

RESULTS

We found new formed Calcium Phosphate peaks in the spectroscopic analysis (FTIR), remarkably the crystals formed were comparable to hydroxyapatite when analyzed with a Selected Area Electron Diffractometer, with rings of 2.84 Å for 002, and the 2.77 Å is also visible for 210. The 6.83 Å and 6.88 Å, for respective 222 and 004. The incorporation of Chlorhexidine was not detrimental for this property, Significance, the features mentioned represented a progress in biomineralization field that was associated to an improved mineral structure formation with increased crystallographic similarity to natural hydroxyapatite. When chlorhexidine was added a favorable biomodification of the remaining collagen in dentinal walls and antimicrobial activity potential were also observed.

In vitro and in vivo evaluation of iRoot BP Plus as a coronal sealing material for regenerative endodontic procedures

OBJECTIVES

To investigate in vitro effects of a nanoparticle bioceramic material, iRoot BP Plus, on stem cells from apical papilla (SCAP) and in vivo capacity to induce pulp-dentin complex formation.

MATERIALS AND METHODS

The sealing ability of iRoot BP Plus was measured via scanning electron microscopy (SEM). SCAP were isolated and treated in vitro by iRoot BP Plus conditioned medium, with mineral trioxide aggregate (MTA) conditioned medium and regular medium used as controls, respectively. Cell proliferation was assessed by BrdU labeling and MTT assay and cell migration was evaluated with wound healing and transwell assays. Osteo/odontogenic potential was evaluated by Alizarin red S staining and qPCR. Pulp-dentin complex formation in vivo was assessed by a tooth slice subcutaneous implantation model.

RESULTS

iRoot BP Plus was more tightly bonded with the dentin. There was no difference in SCAP proliferation between iRoot BP Plus and control groups (P > 0.05). iRoot BP Plus had a greater capacity to elevated cell migration (P < 0.05) and osteo/odontogenic marker expression and mineralization nodule formation of SCAP compared with MTA groups (P < 0.05). Furthermore, the new continuous dentine layer and pulp-like tissue was observed in the iRoot BP Plus group in vivo.

CONCLUSIONS

iRoot BP Plus showed excellent sealing ability, promoted the migration and osteo/odontogenesis of SCAP and induced pulp-dentin complex formation without affecting the cell proliferation, which indicated iRoot BP Plus was a promising coronal sealing material in REPs.

CLINICAL RELEVANCE

The coronal sealing materials play crucial roles for the outcomes of REPs. This study showed that iRoot BP Plus has good coronal sealing and promote pulp-dentin complex formation compared with MTA, providing experimental evidences for the clinical application of iRoot BP Plus as a promising coronal seal material in REPs.

Effect of Fluorohydroxyapatite on Biological and Physical Properties of MTA Angelus

Objectives

This study aimed to assess the effect of addition of fluorohydroxyapatite (FHI) on biological and physical properties of mineral trioxide aggregate (MTA) Angelus.

Materials and Methods

In this in vitro, experimental study, nano-FHI powder was first synthesized, and the morphology and chemical structure of particles were evaluated by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Three groups were evaluated in this study: MTA Angelus, MTA modified with 10% FHA, and MTA modified with 15% FHA. After mixing, the materials were applied to ring molds (10 mm diameter, 1 mm height), and the setting time of the three groups was evaluated according to ISO6876 and ASTMC266-03 with a Gillmore needle. The pH was measured using a pH meter at 24 and 48 hours and 7 days after mixing. The cytotoxicity of the materials was assessed in freshly mixed form and after 1 and 7 days using the methyl thiazolyl tetrazolium (MTT) assay according to ISO10993-5. Data were analyzed by one-way and repeated measures ANOVA and Tukey's test (alpha = 0.05).

Results

The addition of FHA to MTA significantly decreased the initial setting time (P < 0.05) and had no significant effect on cell viability (compared with pure MTA Angelus) at 1 and 7 days. However, modified MTA groups in freshly mixed form showed significantly lower cell viability (P < 0.05). The pH remained alkaline at all time points.

Conclusion

Addition of 15% FHA to MTA Angelus decreased its setting time with no adverse effect on cell viability (except for fresh form) or pH.

Chemical analysis of mineral trioxide agregate mixed with hyaluronic acids as an accelerant

MATERIALS AND METHOD

Mineral trioxide aggregate (MTA) has many clinical applications in dentistry; the main drawback is the long setting. The main objective is to investigate and compare the chemical effect of using two commercially available hyaluronic acid hydrogels (HA) instead of distilled water for mixing MTA as an accelerant of setting time. Test materials were divided into three groups; Group 1: (control) mixing MTA with distilled water supplied by the manufacturer; Group 2: mixing MTA with a hybrid cooperative complex of high and low molecular weight HA (Profhilo®); Group 3: mixing MTA with High molecular weight / non-cross-linked HA (Jalupro®). Mixing time, and setting time (initial and final) were determined, Fourier-transform infrared spectroscopy, Energy-dispersive X-ray spectroscopy, Field emission Scanning Electron Microscopy, and X-ray diffraction were performed.

RESULTS

mixing time, initial, and final setting time for (MTA + HA) groups were significantly different and lower in comparison to the control group (p < 0.05). This study revealed higher expression of calcium silicate hydrate and calcium hydroxide expression with higher Ca release in the MTA + HA group than the control group.

CONCLUSION

commercially available HA demonstrated better chemical properties when used as a mixing medium for MTA. The Mixing and setting time for MTA + HA group were significantly shorter than those of the control group were. Thus, commercially available HA can be used as a mixing medium for MTA.

Effects of direct pulp capping with recombinant human erythropoietin and/or mineral trioxide aggregate on inflamed rat dental pulp

OBJECTIVE

This study aimed to evaluate the dental pulp responses to recombinant human erythropoietin (rhEPO) and/or mineral trioxide aggregate (MTA) in pulp capping of inflamed dental pulp in vivo.

MATERIALS AND METHODS

In accordance with ARRIVE guidelines, pulp inflammation was induced by exposing the maxillary first molars (n = 64) of Wistar rats (n = 32) to the oral environment for two days. The exposed pulps were randomly assigned four groups based on the pulp capping material: rhEPO, MTA, MTA + rhEPO, or an inert membrane. An additional eight rats formed the healthy control group. After four weeks, the animals were euthanized, and histological, qRT-PCR, and spectrophotometric techniques were employed to analyze the left maxillary segments, right first maxillary molars, and blood samples, respectively. Statistical significance was set at p < 0.05 and < 0.001.

RESULTS

Pulp capping with rhEPO, MTA, or MTA + rhEPO resulted in lower inflammation and higher mineralization scores compared to untreated control. MTA + rhEPO group exhibited significantly decreased expression of tumor necrosis factor-alpha, and interleukin 1-beta, while MTA group showed substantially reduced expression of interferon-gamma. Both rhEPO and MTA + rhEPO groups presented elevated dentin matrix protein 1 levels compared to untreated control. Furthermore, pulp capping with rhEPO and/or MTA led to increased transforming growth factor-beta 1 expression and reductions of pro-inflammatory/immunoregulatory cytokine ratios and prooxidative markers. Pulp capping with rhEPO also resulted in increase of systemic antioxidative stress markers.

CONCLUSION

Capping with rhEPO or MTA + rhEPO resulted in a favorable effect that was similar or even superior to that of MTA.

Physicochemical, mechanical and biological properties of nano-calcium silicate-based cements: a systematic review

This systematic review evaluated the effects of nano-sized cement particles on the properties of calcium silicate-based cements (CSCs). Using defined keywords, a literature search was conducted to identify studies that investigated properties of nano-calcium silicate-based cements (NCSCs). A total of 17 studies fulfilled the inclusion criteria. Results indicated that NCSC formulations have favourable physical (setting time, pH and solubility), mechanical (push out bond strength, compressive strength and indentation hardness) and biological (bone regeneration and foreign body reaction) properties compared with commonly used CSCs. However, the characterization and verification for the nano-particle size of NCSCs were deficient in some studies. Furthermore, the nanosizing was not limited to the cement particles and a number of additives were present. In conclusion, the evidence available for the properties of CSC particles in the nano-range is deficient-such properties could be a result of additives which may have enhanced the properties of the material.

Clinical outcomes of non-surgical root canal obturations using NeoMTA: A retrospective series of case reports

NeoMTA is a commercially available tricalcium silicate-based cement intended for contact with pulp and periradicular tissues. The purpose of this study was to retrospectively evaluate the outcomes of non-surgical root canal treatments with NeoMTA obturations. Patients were treated in a private endodontic practice between 2015 and 2018. All cases, including initial treatments and retreatments, were either fully obturated with NeoMTA, or using gutta-percha with NeoMTA as an endodontic sealer. Outcomes were assessed using follow-up examination data with digital periapical radiographs with a minimum of a 1-year recall. Teeth were classified based on the clinical examination as: healed/healing (success), or non-healed (failure). 265 teeth were included with an average follow-up time of 1.3 years. The overall success rate was 91.7%. Only the presence of a pre-operative periapical radiolucency was found to significantly affect success. Comparison of obturation techniques demonstrated no effect on outcomes. NeoMTA is suitable for endodontic obturation.

Emerging Paradigms in Internal Root Resorption Management: Harnessing the Power of Bioceramics

Internal root resorption is a pathological activity involving dentin deterioration within the root canal walls. Numerous variables, including traumatic injury, infection, and orthodontic therapy, can trigger this process. Traditional materials such as mineral trioxide aggregate (MTA) have been utilized to treat internal root resorption but have limitations such as tooth discoloration and handling challenges. Bioceramic materials, such as Bio-C Repair, have emerged as possible MTA substitutes. This case study outlines the effective management of idiopathic extensive perforating internal root resorption using a non-surgical laser-assisted approach and the application of Bio-C Repair as an obturation material. The treatment resulted in the resolution of symptoms and the restoration of periapical tissues. Bioceramics, with their unique composition and favorable biological properties, offer the potential for effective tissue repair and provide alternatives to traditional materials in the treatment of internal resorption. The utilization of bioceramics, including Bio-C Repair, holds promise for achieving successful outcomes and preserving natural dentition.

A New Biomaterial Derived from Aloe vera-Acemannan from Basic Studies to Clinical Application

Aloe vera is a kind of herb rich in polysaccharides. Acemannan (AC) is considered to be a natural polysaccharide with good biodegradability and biocompatibility extracted from Aloe vera and has a wide range of applications in the biomedical field due to excellent immunomodulatory, antiviral, antitumor, and tissue regeneration effects. In recent years, clinical case reports on the application of AC as a novel biomedical material in tissue regenerative medicine have emerged; it is mainly used in bone tissue engineering, pulp-dentin complex regeneration engineering, and soft tissue repair, among other operations. In addition, multiple studies have proved that the new composite products formed by the combination of AC and other compounds have excellent biological and physical properties and have broader research prospects. This paper introduces the preparation process, surface structure, and application forms of AC; summarizes the influence of acetyl functional group content in AC on its functions; and provides a detailed review of the functional properties, laboratory studies, clinical cutting-edge applications, and combined applications of AC. Finally, the current application status of AC from basic research to clinical treatment is analyzed and its prospects are discussed.

Clinical applications of calcium silicate-based materials: a narrative review

Calcium silicate-based materials are hydrophilic materials with biocompatibility and bioactivity properties. Despite many advantages, they might present some problems related to discolouration, setting time, manipulation and solubility depending on the composition of the product and the type of clinical application. Calcium silicate-based materials can be evaluated under two types according to their intended use: calcium silicate-based cements (CSCs) and calcium silicate-based sealers (CSSs). CSCs can be used in many endodontic procedures including perforation repair, resorption repair, apical barriers, guided endodontic repair, vital pulp treatment, endodontic surgery, root fractures and root canal filling as a core obturation material. CSSs are available for use with gutta-percha to obturate root canals using cold and warm techniques, including the sealer-based obturation technique. The purpose of this review is to evaluate the available literature on CSCs and CSSs and to provide up-to-date information and recommendations for their clinical applications.

Effects of Apical Barriers and Root Filling Materials on Stress Distribution in Immature Teeth: Finite Element Analysis Study

PURPOSE

A finite element analysis (FEA) study was performed to determine whether the material of apical barrier used for root apexification and/or the use of canal reinforcement affect the stress distribution in an endodontically treated immature permanent tooth in order to infer in which clinical scenarios a fracture is more likely to occur based on the ultimate tensile strength threshold of dentin.

METHODS AND MATERIALS

An extracted human immature mandibular premolar was selected as the reference model and scanned by micro-computed tomography (micro-CT). The digital model was segmented and converted to STL (Standard Tessellation Language) using Simpleware Scan-IP and exported in IGES (Initial Graphics Exchange Specification) to Ansys 19. Six experimental models were designed with different combinations of composite, mineral trioxide aggregate (MTA), and Biodentine (BIO). Using FEA, a static 300N load at a 135 angle with respect to the axis of the tooth was applied to each model and Von-Mises stress values (MPa) were measured at the sagittal, apical 8mm, 5mm, 2mm, and 1mm levels.

RESULTS

In all regions examined, the control (NT model) had lower stress in the root compared to experimental models. At the mid-root level, models with composite, MTA, and BIO reinforcement exhibited lower stresses in the root dentin than those with pulp or gutta-percha. BIO models had equal or greater average Von-Mises stress values than those of MTA models in all regions. Both, MTA and BIO, caused increases in stress of surrounding root dentin, with BIO causing a greater increase than MTA.

CONCLUSIONS

Stress distribution in immature permanent teeth treated by apexification is affected by the types of materials used. Root dentin's stress was lower when the mid-root canal was reinforced by composite, MTA, or BIO, which provided similar stress reduction to the root dentin. MTA is a more favorable apical barrier material from a mechanical standpoint because it induces less stress on apical root dentin than BIO.

Effects of a mineralization-promoting peptide on the physical and chemical properties of mineral trioxide aggregate

Mineral trioxide aggregate (MTA) has been used widely in dentistry due to its sealing ability and biocompatibility. Delayed setting time is one of the major limitations of MTA. Various additives have been studied to further improve the properties of MTA with varied degrees of success. In this study, we have investigated the effect of a calcium phosphate mineralization promoting-peptide (MPP3) on the physical and chemical properties of MTA in comparison with Na₂HPO₄. Based on the reported effects of MPP3 on calcium-phosphate mineralization reaction, our hypothesis was that MPP3 may also show beneficial effects on the calcium-silicate mineralization system of MTA. Na₂HPO₄ was used for comparison since its setting accelerant effect on MTA has been well documented. The cements were prepared by mixing with distilled water, 0.40 mM MPP3 solution, 15% Na₂HPO₄ solution, and a combination of MPP3 and Na₂HPO₄ solution. Initial and final setting times were measured via Vicat needle. Microhardness values were measured via Vickers indenter at 1,3,7, and 28 days after hydration. Compressive strength after setting was measured via universal testing machine. Morphological and compositional analyses were performed via FESEM imaging, XRD and Raman spectroscopy. The microhardness data was evaluated via repeated-measures ANOVA. Setting time and compressive strength data were evasluated via one-way ANOVA. Initial setting time was reduced to ∼3 min in the Na₂HPO₄ containing groups but remained at ∼5 min in the control and MPP3 groups. Final setting times were significantly reduced in all groups compared to the control group. The reduction in the final setting times in the Na₂HPO₄ containing groups were significantly higher compared to the MPP3 group. Microhardness was significantly higher in the MPP3 group at all time points. No statistically significant difference in compressive strength was observed among the groups. FESEM analysis showed presence of ettringite crystals in the MPP3 group, and NaBiO₃ crystals in the Na₂HPO₄ containing groups. XRD analysis showed a broadening of peaks at 2θ = 32° in the Na₂HPO₄ containing groups, possibly due to presence of NaBiO₃. Raman spectroscopy showed statistically higher ettringite content in the MPP3 containing groups. Our findings indicate that MPP3 is a beneficial additive to eliminate some of the drawbacks associated with MTA with no detrimental effects on mechanical properties and without resulting in phases that potentially cause discoloration, such as NaBiO₃. We propose that the reduced final setting time and increased microhardness by MPP3 may be associated with the increased ettringite content. Future studies, where wider range of MPP3 concentrations are studied may help elucidate and optimize the beneficial effects of MPP3 observed in this study.

Root-end resection with or without retrograde obturation after orthograde filling with two techniques: A micro-CT study

To evaluate the filling ability of two orthograde obturation techniques followed by the apical resection with or without retrograde obturation through micro-computed tomography (CT). Thirty-two single-rooted permanent teeth were prepared and randomised into four groups (n = 8) according to the orthograde obturation technique (single cone technique [SCT] and mineral trioxide aggregate placement) combined or not with retrograde obturation. The volume of voids (VoV) within the entire endodontic space, the apical 3 mm, and 1 mm after root resection was calculated by micro-CT. Statistical analysis showed no significant difference among the groups regarding the total VoV in all root canals, as well as within the apical 1 mm after root resection. The SCT and apical resection without retrograde filling showed significantly better results in terms of VoV at the apical 3 mm after root resection. Within the study limitations, SCT associated with apical resection without retrograde preparation exhibited a similar or less amount of voids than the other groups.

An Updated Review on Properties and Indications of Calcium Silicate-Based Cements in Endodontic Therapy

Regarding the common use of calcium silicate cements (CSCs) in root canal therapy, their position in the context of past and present dentistry agents can provide a better understanding of these materials for their further improvement. In this context, the present review article addresses a wide range of recent investigations in the field of CSC-based products and describes details of their composition, properties, and clinical applications. The need for maintaining or reconstructing tooth structure has increased in contemporary endodontic treatment approaches. This research thus discusses the attempts to create comprehensive data collection regarding calcium ion release, bond strength, alkalinizing activity and bioactivity, and the ability to stimulate the formation of hydroxyapatite as a bioactive feature of CSCs. Sealing ability is also highlighted as a predictor for apical and coronal microleakage which is crucial for the long-term prognosis of root canal treatment integrity. Other claimed properties such as radiopacity, porosity, and solubility are also investigated. Extended setting time is also mentioned as a well-known drawback of CSCs. Then, clinical applications of CSCs in vital pulp therapies such as pulpotomy, apexification, and direct pulp capping are reviewed. CSCs have shown their benefits in root perforation treatments and also as root canal sealers and end-filling materials. Nowadays, conventional endodontic treatments are replaced by regenerative therapies to save more dynamic and reliable hard and soft tissues. CSCs play a crucial role in this modern approach. This review article is an attempt to summarize the latest studies on the clinical properties of CSCs to shed light on the future generation of treatments.

Biocompatibility and osteogenic potential of mineral trioxide aggregate mixed with hydrophilic synthetic polymer: An in vitro and in vivo study

This study aimed to investigate in vitro biologic properties of mineral trioxide aggregate (MTA) mixed with 3% PVA (MTA-3% PVA) and in vivo dental pulp responses to direct capping in comparison with MTA mixed with distilled water (MTA-DW). Cell proliferation and osteogenic differentiation in culture of human dental pulp cells (hDPCs), and pH changes were evaluated. Pulps in 24 mandibular premolars of four 9-month-old beagle dogs were mechanically exposed and direct pulp capping was performed. Histological specimens were scored according to the degree of mineralization. MTA-3% PVA showed similar cell proliferation and similar or superior osteogenic differentiation of hDPCs compared with MTA-DW. All specimens were associated with calcified bridge formation and there were no significant differences in mineralization scores between the groups (p>0.05). The results suggested that MTA-3% PVA exhibited favorable biocompatibility and osteogenic differentiation in vitro compared with MTA-DW. Furthermore, both groups demonstrated similar results when used as pulp-capping agents in vivo.

Does adding accelerators to Mineral Trioxide Aggregate affect the shear bond strength?

Amaç: Bu çalışmada, farklı hızlandırıcı ilave edilen Mineral Trioksit Agregat’ın (MTA) kompozite farklı sertleşme sürelerinde makaslama bağlanma dayanımının (MBD) değerlendirilmesi amaçlanmıştır. Gereç ve Yöntemler: Merkezi boşluklara sahip 120 adet akrilik blok 4 ana gruba ayrıldı. 1. grup (kontrol); sadece MTA, 2, 3 ve 4. grup ise sırasıyla %10 kalsiyum klorür (CaCl2), %23,1 kalsiyum laktat glokonat (CLG) ve %15 disodyum hidrojen fosfat (Na2HPO4) ile karıştırılmış MTA içermektedir. Her grup 2 saat 45 dakika , 24 saat ve 96 saat sertleşme süresine göre 3 alt gruba ayrıldı. Bekleme süreleri tamamlandıktan sonra adeziv sistem (Clearfil SE Bond, Kuraray) ve kompozit rezin (Clearfil Majesty, Kuraray) işlemleri tamamlanan örneklere evrensel test cihazında MBD testi uygulandı. Elde edilen verilerinin karşılaştırmasında, tek yönlü varyans analizi (ANOVA) ve Tukey HSD testleri kullanıldı. Bulgular: Hızlandırıcısız MTA en yüksek ortalama MBD değeri sergiledi. Hızlandırıcısız MTA, hızlandırıcı olarak CLG ve Na2HPO4 eklenen MTA ile kıyaslandığında aralarındaki fark anlamlı bulundu (p&lt;0.0001). Başlangıç sertleşme süresinde alt gruplar arasında istatistiksel olarak anlamlı farklılık gözlenmedi (p&gt;0,05), diğer sertleşme sürelerinde fark anlamlı bulundu (p&lt;0,05). MTA’ya hızlandırıcı olarak CLG ve Na2HPO4 ilavesinin tüm sürelerde MBD değerlerini azalttığı, CaCl2 ilavesinin ise 96 saatin ardından MBD değerini anlamlı olarak yükselttiği gözlendi. Sonuç: MTA içerisine hızlandırıcı eklemek MBD değerini düşürmektedir. Ancak MTA’ya hızlandırıcı olarak %10 CaCl2 eklemek 96 saatin ardından yapılacak restoratif işlemlerde pozitif bağlantı sonuçları ortaya çıkarabilir.

Modified Mineral Trioxide Aggregate—A Versatile Dental Material: An Insight on Applications and Newer Advancements

Mineral Trioxide Aggregate (MTA) has been a material of revolution in the field of dentistry since its introduction in the 1990s. It is being extensively used for perforation repairs, apexification, root-end filling, obturation, tooth fracture repair, regenerative procedures, apexogenesis, pulpotomies, and as a pulp-capping material because of its desired features such as biocompatibility, bioactivity, hydrophilicity, sealing ability, and low solubility. Even though its application is wide, it has its own drawbacks that prevent it from reaching its full potential as a comprehensive replacement material, including a long setting time, discoloration, mud-like consistency, and poor handling characteristics. MTA is a material of research interest currently, and many ongoing studies are still in process. In this review, the newer advancements of this versatile material by modification of its physical, chemical, and biological properties, such as change in its setting time, addressing the discoloration issue, inclusion of antimicrobial property, improved strength, regenerative ability, and biocompatibility will be discussed. Hence, it is important to have knowledge of the traditional and newer advancements of MTA to fulfill the shortcomings associated with the material.

Shear bond strength of resin-modified glass ionomer cement bound to mineral trioxide aggregate after various disinfection protocols

This study compared the effects of 3 different cavity disinfection protocols (CDP) on the shear bond strength (SBS) of resin-modified glass ionomer cement (RM-GIC) to mineral trioxide aggregate (MTA). One hundred eighty standard holes were prepared and filled with MTA. They then divided into 3 main groups based on the chosen time intervals (15 min, 24 h, and 72 h). Main groups were divided into 3 subgroups based on the CDP [chlorhexidine gluconate (CHX), ozone, laser, and control]. RM-GIC was applied on MTA after CDP for all groups. A universal testing device was then used for test and the data was statistically analysed. CHX showed significantly lower SBS values except ozone and laser than the control (p < 0.05). There were no statistically significant differences among the time intervals. As a result, CHX decreased the bond strength between the MTA and RM-GIC while ozone and laser had no negative effect.

Morphological and Chemical Analysis of Different Types of Calcium Silicate-Based Cements

Objectives. Particle size and shape can influence the properties of materials. However, to improve the physicochemical and biological properties of mineral trioxide aggregate (MTA), silicate-based hydraulic cements were introduced. This study aimed to evaluate and compare the major constituents and crystalline structures along with the surface morphology of different types of calcium silicate-based cement (CSC). Materials and Methods. Six different types of CSC (white Portland cement, white ProRoot MTA, white MTA Angelus, Biodentine, and Endosequence, both putty and paste) were used in this study. Five samples of each material were analyzed in both uncured and cured cement using scanning electron microscopy/energy-dispersive X-ray (SEM/EDX), X-ray diffraction (XRD), and Fourier transform-infrared spectroscopy (FTIR). Results. SEM analysis showed that the surfaces of all materials consisted of particle sizes ranging from 0.194 μm to approximately 51.82 μm. The basic elements found in both uncured and cured cement of all tested materials using EDX were carbon, calcium, silicon, and oxygen. A difference was observed in the presence or absence of magnesium, aluminum, bismuth, zirconium, and tantalum. XRD showed that all tested materials were composed mainly of tricalcium silicate and dicalcium silicate, which are the main components of Portland cement. FTIR analysis showed aromatic rings, phosphine PH, alkyl halides, and alcohol O-H groups in all tested materials but at different wavenumbers. Conclusions. The different types of CSCs tested in this study were primarily modified types of Portland cement with the addition of radiopacifiers. ProRoot MTA and MTA Angelus contained bismuth oxide, Biodentine contains zirconium oxide, whereas Endosequence root repair materials (both putty and paste) contained zirconium oxide and tantalum oxide. Endosequence root repair materials showed smaller particle sizes than the other groups. White PC had the most irregular and large particle sizes. CSC had a smaller particle size, except for MTA Angelus. Clinical Relevance. The composition of CSC has a direct influence on the properties of these cements, which may affect the clinical outcome of the treatment.

Development and Analysis of a Hydroxyapatite Supplemented Calcium Silicate Cement for Endodontic Treatment

Aim: To develop an endodontic cement using bovine bone-derived hydroxyapatite (BHA), Portland cement (PC), and a radiopacifier. Methods: BHA was manufactured from waste bovine bone and milled to form a powder. The cements were developed by the addition of BHA (10%/20%/30%/40% wt), 35% wt, zirconium oxide (radiopacifier) to Portland cement (PC). A 10% nanohydroxyapatite (NHA) cement containing PC and a radiopacifier, and a cement containing PC (PC65) and a radiopacifier were also manufactured as controls. The cements were characterised to evaluate their compressive strength, setting time, radiopacity, solubility, and pH. The biocompatibility was assessed using Saos-2 cells where ProRoot MTA acted as the control. Compressive strength, solubility and pH were evaluated over a 4-week curing period. Results: The compressive strength (CS) of all cements increased with the extended curing times, with a significant CS increase in all groups from day 1 to day 28. The BHA 10% exhibited significantly higher CS compared with the other cements at all time points investigated. The BHA 10% and 20% groups exhibited significantly longer setting times than BHA 30%, 40% and PC65. The addition of ZrO₂ in concentrations above 20% wt and Ta₂O₅ at 30% wt resulted in a radiopacity equal to, or exceeding that of, ProRoot MTA. The experimental cements exhibited relatively low cytotoxicity, solubility and an alkaline pH. Conclusions: The addition of 10% and 20% BHA to an experimental PC-based cement containing 35% ZrO₂ improved the material’s mechanical strength while enabling similar radiopacity and biocompatibility to ProRoot MTA. Although BHA is a cost-effective, biomimetic additive that can improve the properties of calcium silicate endodontic cements, further studies are now warranted to determine its clinical potential.

A Scanning Electron Microscopic Study on Effect of Blood and Artificial Salivary Contamination on Marginal Adaptation of Mineral Trioxide Aggregate, When Used as a Retrograde Filling Material: An In Vitro Study

Aim and objective

The present study was conducted to evaluate the marginal adaptability of mineral trioxide aggregate (MTA) as a root-end filling material when manipulated using two different IV fluids intended for pediatric usage; in the presence of blood and salivary contamination.

Materials and methods

Sixty single-rooted teeth were selected. Conventional endodontic root canal preparation was performed on all specimens followed by root-end resection and retrograde cavity preparation. The roots were randomly divided into two groups (n = 30). In the specimens of group I, fresh blood was used as a contaminant and in group II artificial saliva was used as a contaminant. In both groups, MTA (e-MTA, Kids-e-Dental®) manipulated using either Ringer's lactate IV fluid (n = 15) or Tetraspan IV fluid (n = 15) was used for root-end filling in blood or artificial saliva-coated retrocavities. Furthermore, these roots were placed in beakers pooled with fresh phlebotomized blood or artificial saliva. After incubating for 48 hours, the roots were divided longitudinally to expose the retrofilled cavities and were then sputter-coated with gold-platinum dust. To assess the marginal adaptation of MTA to radicular dentin "maximum gap width" and "gap perimeter" were measured in images obtained from scanning electron microscopy of root specimens. SPSS 21 was employed for statistical analysis at (p < 0.05). Mann-Whitney U test and ANOVA were used for analyzing the data obtained.

Results

The gap width was more among samples exposed to blood (p < 0.05) than artificial saliva. No significant difference was reported in the gap perimeter when cavities were filled with MTA mixed with either IV fluids (p > 0.05).

Conclusion

Exposure to blood during setting had a negative effect on gap width when retrocavities were filled with MTA using Tetraspan. No effect was seen on the arch perimeter in retrocavities filled with MTA mixed with Ringer's lactate or Tetraspan.

Clinical significance

For avoiding failure, it is critical to select a biocompatible root-end filling material with high sealing ability. Hence, by doing the same, the clinical situation can be simulated.

How to cite this article

Mody A, Arora R, Chauhan P, et al. A Scanning Electron Microscopic Study on Effect of Blood and Artificial Salivary Contamination on Marginal Adaptation of Mineral Trioxide Aggregate, When Used as a Retrograde Filling Material: An In Vitro Study. Int J Clin Pediatr Dent 2021;14(5):674-680.

The biocompatibility and mineralization potential of mineral trioxide aggregate containing calcium fluoride-An in vitro study

BACKGROUND/PURPOSE

MTA is used to induce hard tissue regeneration in various procedures. This study evaluated the biocompatibility and mineralization potential of mineral trioxide aggregate (MTA) containing calcium fluoride (CaF2). To verify if the change of components affected physical properties, the setting time, solubility, and surface roughness were measured.

MATERIALS AND METHODS

Human dental pulp cells (HDPCs) were treated with powder and set MTA containing CaF2 (0, 1, 5, and 10 wt %). The proliferation of HDPCs was investigated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The mineralization potential of HDPCs was investigated with the relative gene expression of alkaline phosphatase (ALP), collagen type I (ColI), osteocalcin (OCN), and runt-related transcription factor 2 (Runx2) using real-time reverse transcription polymerase chain reaction (RT-PCR). For investigating the physical properties, setting time and solubility were tested. Surface profiles of material were analyzed by a non-contact surface profiler and a scanning electron microscope (SEM).

RESULTS

MTA-5% CaF2 mixtures increased the proliferation and the mineralization-related gene expression of HDPCs to a greater degree than pure MTA. The addition of CaF2 to MTA delayed the setting, but the difference was only significant in the MTA-10% CaF2. Solubility and surface roughness was not altered.

CONCLUSION

The addition of more than 5% CaF2 can be considered to increase the regeneration potential of pulp cells without adverse effects on physical property.

Fabrication and Characterization of a Nanofast Cement for Dental Restorations

This study was aimed at fabricating and evaluating the physical and bioproperties of nanofast cement (NFC) as a replacement of the MTA. The cement particles were decreased in nanoscale, and zirconium oxide was used as a radiopacifier. The setting time and radiopacity were investigated according to ISO recommendations. Analysis of color, bioactivity, and cytotoxicity was performed using spectroscopy, simulated body fluid (SBF), and MTT assay. The setting time of cement pastes significantly dropped from 65 to 15 min when the particle sizes decreased from 2723 nm to 322 nm. Nanoparticles provide large surface areas and nucleation sites and thereby a higher hydration rate, so they reduced the setting time. Based on the resulting spectroscopy, the specimens did not exhibit clinically noticeable discoloration. Resistance to discoloration may be due to the resistance of zirconium oxide to decomposition. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and infrared spectroscopy (FTIR) examinations of the immersed SBF samples showed apatite formation that was a reason for its suitable bioactivity. The results of cell culture revealed that NFC is nontoxic. This study showed that NFC was more beneficial than MTA in dental restorations.

Investigation of characteristics as endodontic sealer of novel experimental elastin-like polypeptide-based mineral trioxide aggregate

Although mineral trioxide aggregates (MTA) have been adopted as an endodontic sealer because of excellent sealing effect and bioactive property and been modified with improvement of its characteristics, the developed MTA sealers have not yet satisfied all the ideal requirements of endodontic sealers. The aim of this study was to assess the characteristics of elastin-like polypeptide (ELP)-incorporated MTA for use as an endodontic sealer and compare them with those of commercial MTA sealers. Two commercial MTA sealers and three experimental ELP-incorporated MTA sealers with 0.3, 0.4, and 0.5 liquid/powder (L/P) ratio for 10 wt% ELP liquid were evaluated. The push-out bond strength, flow rate, sealer penetrability and wash-out resistance were tested and the sealer-dentin interface was observed using a scanning electron microscope (SEM). Our study revealed the ELP-incorporated MTA sealer, especially in 0.4 L/P ratio, exhibited the higher push-out bond strength and flow rate (P < 0.05), and equal or superior sealer penetration and remarkable wash-out resistance compared to commercial MTA sealers. The groups of ELP-based experimental sealers also exhibited more intimate contact with dentin compared to the commercial MTA sealers. Our research will suggest the possible adoption of the ELP-incorporated MTA as endodontic sealer for clinical use.

Bio-C Repair - A New Bioceramic Material for Root Perforation Management: Two Case Reports

These case reports aimed to describe the management of lateral perforation in the middle cervical third of the root in two maxillary incisors with pulp canal calcification using Bio-C Repair, with safe and viable clinical treatment strategies. Digital radiographic exams were obtained with different angles and analyzed using different filters. Cone-beam computed tomography (CBCT) images were requested to show the actual position of the canal, location of the perforation, and guide the strategic planning of the case. Subsequently, cavity access was prepared with the aid of dental operating microscopy. After perforation was identified, granulation tissue was removed and the original canal was identified and then dressed with calcium hydroxide. In the second visit, the perforation was filled with Bio-C Repair and the canal system filled with gutta-percha points and a root canal sealer (Bio-C Sealer). The teeth were restored with glass fiber post, 4 mm beyond the perforation level, and provisory crowns. Both teeth treated as described above were functional and asymptomatic with a 1-year clinical and radiographic assessment. The Bio-C Repair is suggested as a new cement option for the management of lateral canal perforations, with effective results as observed after a one-year follow-up.

Physical, Chemical, Mechanical, and Biological Properties of Four Different Commercial Root-End Filling Materials: A Comparative Study

Commercial mineral trioxide aggregate (MTA) materials such as Endocem MTA (EC), Dia-Root Bio MTA (DR), RetroMTA (RM), and ProRoot MTA (PR) are increasingly used as root-end filling materials. The aim of this study was to assess and compare the physicochemical and mechanical properties and cytotoxicity of these MTAs. The film thicknesses of EC and DR were considerably less than that of PR; however, RM’s film thickness was greater than that of PR. In addition, the setting times of EC, DR, and RM were shorter than that of PR (p < 0.05). The solubility was not significantly different among all groups. The three relatively new MTA groups (EC, DR, and RM) exhibited a significant difference in pH variation and calcium ion release relative to the PR group (p < 0.05). The radiopacity of the three new MTAs was considerably less than that of PR. The mechanical strength of RM was not significantly different from that of PR (p > 0.05); however, the EC and DR groups were not as strong as PR (p < 0.05). All MTA groups revealed cytocompatibility. In conclusion, the results of this study confirmed that EC, RM, DR, and PR exhibit clinically acceptable physicochemical and mechanical properties and cell cytotoxicity.

The Role of Hydraulic Silicate Cements on Long-Term Properties and Biocompatibility of Partial Pulpotomy in Permanent Teeth

The use of hydraulic silicate cements (HSCs) for vital pulp therapy has been found to release calcium and hydroxyl ions promoting pulp tissue healing and mineralized tissue formation. The present study investigated whether HSCs such as mineral trioxide aggregate (MTA) affect their biological and antimicrobial properties when used as long-term pulp protection materials. The effect of variables on treatment outcomes of three HSCs (ProRoot MTA, OrthoMTA, and RetroMTA) was evaluated clinically and radiographically over a 48–78 month follow-up period. Survival analysis was performed using Kaplan–Meier survival curves. Fisher’s exact test and Cox regression analysis were used to determine hazard ratios of clinical variables. The overall success rate of MTA partial pulpotomy was 89.3%; Cumulative success rates of the three HSCs were not statistically different when analyzed by Cox proportional hazard regression analysis. None of the investigated clinical variables affected success rates significantly. These HSCs showed favorable biocompatibility and antimicrobial properties in partial pulpotomy of permanent teeth in long-term follow-up, with no statistical differences between clinical factors.

Antimicrobial and physicochemical characterization of endodontic sealers after exposure to chlorhexidine digluconate

OBJECTIVES

Assess the antibacterial, physical and chemical properties of AH Plus, BioRoot RCS and Pulp Canal Sealer (PCS) in contact with 2% chlorhexidine digluconate (CHX) used as final irrigant prior to root canal obturation.

METHODS

The antimicrobial properties were investigated by direct contact tests for planktonic and biofilm growth of E. faecalis, S. mutans, S.epidermidis and S.aureus in vitro. The setting time, wettability, microhardness and surface roughness were also assessed. The sealers were studied in no contact, 1-minute (short-term) and continuous contact (long-term) with CHX. Chemical characterization of sealers was performed by scanning electron microscopy, X-ray diffraction analysis and Fourier-transform infrared spectroscopy after CHX or saline used as the last irrigant in an ex vivo tooth model and in endo training blocks.

RESULTS

CHX increased the antibacterial activity of all the sealers investigated against planktonic bacteria and biofilms with PCS exerting the highest antimicrobial activity with and without the presence of CHX. The setting of AH Plus and BioRoot RCS was retarded, while for PCS accelerated in the presence of CHX. AH Plus and PCS were more hydrophilic after contact with CHX, whilst BioRoot RCS was hydrophobic in a time-dependent manner. The microhardness of sealers was compromised and the surface roughness increased after CHX exposure for AH Plus and BioRoot RCS, and decreased for PCS. CHX did not affect the sealers' chemistry, but PCS that exhibited two extra phases.

SIGNIFICANCE

CHX improved the antibacterial efficacy of endodontic sealers but further evidence is needed to confirm its suitability as a final irrigant prior to root canal obturation.

Effect of the addition of nanoparticles of CaCO3 and different water-to-powder ratios on the physicochemical properties of white Portland cement

The addition of calcium carbonate nanoparticles (nano-CaCO₃ ) accelerates the hydration of Portland cement improving its mechanical properties. Conversely, nano-CaCO₃ addition leads to reduction in the water required during initial PC hydration. Therefore, the use of a correct water-to-powder ratio is fundamental for manipulating this hydraulic cement. This study evaluated the effect of nano-CaCO₃ addition and different water-to-powder ratios on the physicochemical properties of white Portland cement (WPC). WPC was associated to different concentrations of nano-CaCO₃ , and the following experimental groups were created: G1a (no nano-CaCO₃ ); G2a (0.5% nano-CaCO₃ ), G3a (1% nano-CaCO₃ ), G4a (2% nano-CaCO₃ ), and G5a (5% nano-CaCO₃ ). The setting-time (ST), compressive strength (CS), dimensional change (DC), solubility (S), and pH were assessed (24 hr and 30 days). Next, WPC + 5% nano-CaCO₃ was manipulated varying the water-to-powder ratio: G1b (WPC/0.33 ml); G2b (WPC/nano-CaCO₃ /0.33 ml); G3b (WPC/0.29 ml); G4b (WPC/nano-CaCO₃ /0.29 ml); G5b (WPC/0.26 ml); and G6b (WPC/nano-CaCO₃ /0.26 ml). The tests were repeated. The data analysis (2-way ANOVA and Tukey test, α = 5%) demonstrated that ST was shorter for samples containing nano-CaCO₃ (p < .05). Reduction in CS was observed for all groups at 30 days, except G5a, G2b, and G6b (p < .05). DC and S had no statistical difference among groups (p > .05) independently of nano-CaCO₃ water-to-powder ratio. After 30 days, there was significant reduction in pH for G3a and G6b (p < .05). The different concentrations of nano-CaCO₃ and water-to-powder ratios affected the physicochemical properties of WPC, especially the setting-time and compressive strength.

A 3D finite element analysis of stress distribution on different thicknesses of mineral trioxide aggregate applied on various sizes of pulp perforation

OBJECTIVES

The aim of this study was to evaluate the stress distribution on different thicknesses of mineral trioxide aggregate (MTA) placed on various widths of pulp perforations during the condensation of the composite resin material.

MATERIALS AND METHODS

The mandibular molar tooth was modeled by COSMOSWorks program (SolidWorks, Waltham, MA). Three finite elemental analysis models representing 3 different dimensions of pulp perforations, 1, 2, and 3 mm in diameter, were created. The perforation area was assumed as filled with MTA with different thicknesses, 1, 2, and 3 mm for each pulp perforation width, creating a total of 9 different models. Then, a composite resin material was layered on MTA for each model. A 66.7 N load was applied and an engineering simulation program (ANSYS, Canonsburg, US) was used for the analysis. Results were presented considering von Mises stress criteria.

RESULTS

As MTA thickness increased, the stress values recorded within the area between pulp and MTA decreased. Strain was decreased when the thickness of MTA increased.

CONCLUSIONS

Stresses at MTA-pulp interface and strain on MTA decreased with the increase in MTA thickness.

CLINICAL RELEVANCE

In clinical practice, when MTA is required for pulp capping, using a thick layer of the material seems to be a better option in order to reduce the stress under forces of hand condensation of overlying restorative materials.

Evaluation of Mechanical Activation and Chemical Synthesis for Particle Size Modification of White Mineral Trioxide Aggregate

Objective

Initial setting time is one of the most important properties of calcium silicate cements (CSCs) such as white mineral trioxide aggregate (WMTA). This study aimed to evaluate the effect of two methods used to reduce the particle size of WMTA, mechanical activation and chemical synthesis.

Methods

WMTA without bismuth oxide (WMTA-B) was provided and divided into four groups (n=5) including: WMTA-B, WMTA-B+10 min milling, WMTA-B+30 min milling, and sol-gel. In groups 2 and 3, the milling was performed by using tungsten carbide balls in a ratio 1:15 (w/w) and a vibration frequency of 30 Hz together with absolute ethanol. For the fourth group, polyethylene glycol (PEG), calcium acetate (Ca(C₂H₃O₂)₂), SiO₂, and aluminum oxide (Al₂O₃) were used for the sol-gel process. After preparation, sample powders were mixed with distilled water and placed in cylindrical molds, covered with water-moistened gauze, and incubated at 37°C for 24 hours. The Vicat needle test analyzed the initial setting time. Data were analyzed by ANOVA and Tukey tests at a significance level of P<0.05. The correlation between particle size and setting time was determined.

Results

Initial setting time of the sol-gel and WMTA-B+30 min milling was significantly lower than in the other two groups (P<0.05). A significant correlation was noticed between particle size and initial setting time (P<0.05).

Conclusion

Sol-gel process introduces a promising alternative strategy for the reduction of initial setting time of CSC materials. While both methods increased surface area, mechanical activation was not as successful in reducing surface area and initial setting time as effectively as the sol-gel process.

Biomimetic Aspects of Restorative Dentistry Biomaterials

Biomimetic has emerged as a multi-disciplinary science in several biomedical subjects in recent decades, including biomaterials and dentistry. In restorative dentistry, biomimetic approaches have been applied for a range of applications, such as restoring tooth defects using bioinspired peptides to achieve remineralization, bioactive and biomimetic biomaterials, and tissue engineering for regeneration. Advancements in the modern adhesive restorative materials, understanding of biomaterial-tissue interaction at the nano and microscale further enhanced the restorative materials' properties (such as color, morphology, and strength) to mimic natural teeth. In addition, the tissue-engineering approaches resulted in regeneration of lost or damaged dental tissues mimicking their natural counterpart. The aim of the present article is to review various biomimetic approaches used to replace lost or damaged dental tissues using restorative biomaterials and tissue-engineering techniques. In addition, tooth structure, and various biomimetic properties of dental restorative materials and tissue-engineering scaffold materials, are discussed.

Acemannan Used as an Implantable Biomaterial for Vital Pulp Therapy of Immature Permanent Teeth Induced Continued Root Formation

Direct pulp-capping, a vital pulp therapy, is used to protect and preserve pulp vitality by applying a biomaterial on the pulp exposure site. Acemannan, a polysaccharide extracted from Aloe vera, induces osteodentin-bridge formation to cover the exposure site in vivo. We evaluated the effect of acemannan sponges on partial pulpotomized permanent teeth with caries or accident-induced pulp exposure (n = 50). After removing infected dentin and inflamed pulp tissue, the teeth were randomly divided into acemannan or control (mineral trioxide aggregate (MTA) groups (n = 25). The teeth were examined immediately after treatment (baseline) and at 6- and 12-month follow-ups for clinical and cone beam computed tomography (CBCT) examination. The three-dimensional tooth length and root apex area were simulated to determine treatment success. We found that the overall success rate in the acemannan and MTA groups from baseline to 12-month follow-up was 90.91% and 95.65%, respectively, with no significant difference between the two groups (p > 0.05). In the success teeth in both groups, the root length increased, and the apex area significantly decreased (p < 0.05), indicating continued root formation. Our results suggest that acemannan is a promising low-cost biomaterial for partial pulpotomy treatment for immature permanent teeth requiring vital pulp therapy.

A Silk Fibroin Based Hydration Accelerator for Root Canal Filling Materials

Mineral trioxide aggregate (MTA) is widely used in various dental endodontic applications such as root-end filling, furcal perforation repair, and vital pulp therapy. In spite of many attempts to improve handling properties and reduce the discoloration of MTA, the ideal root canal filling material has yet to be fully developed. The objective of this study was to investigate the setting time, mechanical properties, and biocompatibility of MTA set by a silk fibroin solution. A 5 wt% silk fibroin (SF) solution (a novel hydration accelerant) was used to set SavDen® MTA and ProRoot® white MTA (WMTA). Changes in setting time, diametral tensile strength (DTS), material crystallization, in vitro cell viability, and cell morphology were assessed by Vicat needle measurement, a universal testing machine, scanning electron microscopy (SEM), and WST-1 assay, respectively. The initial setting time of ProRoot® MTA and SavDen® MTA experienced a drastic decrease of 83.9% and 42.1% when deionized water was replaced by 5 wt% SF solution as the liquid phase. The DTS of SavDen® MTA showed a significant increase after set by the SF solution in 24 h. A human osteoblast-like cell (MG-63)-based WST-1 assay revealed that both ProRoot® MTA and SavDen® MTA hydrated using SF solution did not significantly differ (p > 0.05) in cell viability. MG-63 cells with pseudopodia attachments and nuclear protrusions represent a healthier and more adherent status on the surface of MTA when set with SF solution. The results suggest that the 5 wt% SF solution may be used as an alternative hydration accelerant for MTA in endodontic applications.

Development of calcium phosphate/calcium sulfate biphasic biomedical material with hyaluronic acid containing collagenase and simvastatin for vital pulp therapy

OBJECTIVE

In vital pulp therapy (VPT), a barrier is created with appropriate capping to protect the remaining pulp and thus maintain pulp vitality. Here, we evaluated the feasibility of a biphasic calcium phosphate cement (CPC)-calcium sulfate hemihydrate (CSH) biomaterial containing simvastatin (Sim) and collagenase (Col) for VPT.

METHODS

Combinations of varying CPC and CSH concentrations were analyzed for their handling properties and setting times, with their structures observed through scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDS). Drug release patterns of simvastatin and collagenase combined with CPC-CSH (CPC-CSH-Sim-Col) were also analyzed, followed by biocompatibility and bioactivity tests on human dental pulp stem cells (hDPSCs) and in vivo animal study in canine models; the in vivo results were obtained through microcomputed tomography and histological analysis.

RESULTS

The results revealed that 70 wt% CPC (CPC7) with 30 wt% CSH (CSH3) exhibited optimal setting time and porous structure for clinical use. The cell viability and cytotoxicity analysis demonstrated that CPC7-CSH3 with or without simvastatin or collagenase did not injure hDPSCs. In vivo, the CPC7-CSH3-Sim-Col induced dentin bridge formation.

SIGNIFICANCE

CPC7-CSH3-Sim-Col in this study has great potential as a VPT biomaterial to enhance the dentin bridge formation.

Calcium Silicate-Based Cements as Root Canal Medicament

Purpose

This study aims to retard the setting reaction of CSC by mixing it with 2% chlorhexidine gel (CHX) which will be used as an intracanal medicament, and to evaluate the removal of the experimental medicaments from the root canal.

Materials and Methods

White Portland cement, white ProRoot MTA and Biodentine were mixed with 2% CHX. The setting time, flowability and film thickness of the CSC/CHX mixture (experimental medicaments) were assessed and measured following the standards of ISO specification. Calcium ion release was measured using ICP-OES, while pH was tested using a pH meter. Moreover, twenty single-rooted teeth were filled with the experimental medicaments for seven days, then the medicaments were removed and the samples analyzed using SEM. Calcium hydroxide paste was used as a control.

Results

The setting time of the experimental medicaments was inhibited until 84 days. The calcium ion release of the experimental medicaments was significantly higher compared to the control over the period of 14 days (P<0.001). The mean pH value was above 11.45 for all tested materials over a period of 14 days, with no significant difference between them (P<0.05). There was no significant difference in film thickness of the experimental medicaments compared to the control (P> 0.05). However, the flowability of the experimental medicaments was significantly higher than the control (P<0.05). SEM showed no significant differences in the removal of the intracanal medicaments between all the tested groups.

Conclusion

The addition of 2% CHX to CSCs retarded or inhibited its setting reaction over a period of 84 days. The calcium ion release and flowability of these experimental medicaments was found to be better than calcium hydroxide. Removal of the intracanal medicaments from the root canal was successfully achieved in all groups. Therefore, these experimental medicaments have the potential to be used as an enhanced root canal medicament.

Physicochemical parameters - hydration performance relationship of the new endodontic cement MTA Repair HP

Background

To characterize the chemical composition and textural parameters of the MTA Repair HP precursor powder and their influence to hydration performance.

Material and Methods

Un-hydrated precursor material was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray fluorescence (XRF), laser diffraction (LD), N2 physisorption and field emission gun scanning electron microscopy (FEG-SEM). Setting time was assessed according to ASTM specification C 266. Hydrated material was analysed by XRD, FT-IR, energy dispersive X-ray (EDX) analysis and FEG-SEM.

Results

Ca3SiO5 and Ca2SiO4, in addition to CaWO4 as radiopacifier are the main compositional phases. Other measured parameter indicates high specific surface area of 4.8 m2 g-1, high aluminium content of 1.7 wt.% and low initial and final setting times of 12 and 199 min, respectively. Singular microstructural features consisting of high aspect ratio nanoparticles are main constituents of un-hydrated precursor. Besides, FEM-SEM observation shows notably growth of hexagonal shaped plate-like morphologies homogeneously distributed along the sample during hydration process.

Conclusions

The short setting time measured for HP Repair, is correlated with high surface area of precursor powder, high Al content and the absence of compositional sulphate phases.

Key words:Bioactive endodontic cements, hydration performance, MTA HP Repair, physicochemical parameters.

Bioactive tri/dicalcium silicate cements for treatment of pulpal and periapical tissues

Over 2500 articles and 200 reviews have been published on the bioactive tri/dicalcium silicate dental materials. The indications have expanded since their introduction in the 1990s from endodontic restorative and pulpal treatments to endodontic sealing and obturation. Bioactive ceramics, based on tri/dicalcium silicate cements, are now an indispensable part of the contemporary dental armamentarium for specialists including endodontists, pediatric dentists, oral surgeons andfor general dentists. This review emphasizes research on how these materials have conformed to international standards for dental materials ranging from biocompatibility (ISO 7405) to conformance as root canal sealers (ISO 6876). Potential future developments of alternative hydraulic materials were included. This review provides accurate materials science information on these important materials. STATEMENT OF SIGNIFICANCE: The broadening indications and the proliferation of tri/dicalcium silicate-based products make this relatively new dental material important for all dentists and biomaterials scientists. Presenting the variations in compositions, properties, indications and clinical performance enable clinicians to choose the material most suitable for their cases. Researchers may expand their bioactive investigations to further validate and improve materials and outcomes.

Initial inflammatory response after the pulpotomy of rat molars with MTA or ferric sulfate

PURPOSE

To compare, both qualitatively and quantitatively, the inflammatory cells, vascular density and IL-6 immunolabeled cells present in the pulp after pulpotomy with white MTA versus 15.5% ferric sulfate (FS).

METHODOLOGY

Forty-eight mandibular first molars from 24 Wistar rats were divided into MTA or FS groups and subdivided according to the period after pulpotomy procedure (24, 48 and 72 hours). Four teeth (sound and untreated) were used as controls. Histological sections were obtained and assessed through the descriptive analysis of morphological aspects of pulp tissue and the quantification of inflammatory cells, vascular density and interleukin-6 (IL-6) expression. Data were statistically analyzed (p<0.05).

RESULTS

The number of inflammatory cells was similar in both groups, being predominantly localized at the cervical radicular third. In the MTA group, increased inflammation was observed at 48 hours. Vascular density was similar in both groups and over time, being predominant in the medium radicular third. No correlation was found between the number of inflammatory cells and the vascular density. Pulp tissue was more organized in MTA-treated teeth. In both groups, a weak to moderate IL-6 expression was detected in odontoblasts and inflammatory cells. Comparing both groups, there was a greater IL-6 expression in the cervical radicular third of teeth treated with MTA at 24 hours and in the medium and apical thirds at 72 hours, while in the FS group a greater IL-6 expression was found in the apical third at 24 hours.

CONCLUSION

The MTA group presented better histological features and greater IL-6 expression than the FS group. However, no difference was observed between the groups regarding the inflammatory status and vascularization, suggesting the usefulness of FS as a low-cost alternative to MTA.