The effect of three composite fiber insertion techniques on fracture resistance of root-filled teeth

Minimally Invasive Esthetic Reinforcement of a Fractured Anterior Tooth Using Dentapreg PINPost: A Case Report

The reason to use post is to retain the core that holds the definitive prosthesis. The maxillary central incisor always poses a challenge during reconstruction using the post and core system. Dentapreg PINPost, a pre-cured flexible post made of fiber-reinforced composite (FRC), has many advantages over metallic posts and fiber posts. The purpose of this case report is to present an innovative technique to place both FRC posts and FRC sheets as a single assembly into the canal which gives a monoblock effect. This technique is feasible and may eradicate some of the problems associated with the failure of the post and core.

Fracture Resistance of Fiber-Reinforced Composite Restorations: A Systematic Review and Meta-Analysis

Composite resin is universally used for posterior teeth restorations. Fibers have been suggested for the mechanical improvement of the restorations. This study assessed the fracture resistance of class II fiber-reinforced composite restorations and compared it with the fracture resistance of three control groups: (1) healthy teeth, (2) non-fiber-reinforced restorations and (3) unrestored cavities. A search was performed using PubMed, Web of Science and Google Scholar from 15 May to 12 June 2023. Only in vitro studies from the last 10 years were included for this systematic analysis. This study was registered in the PROSPERO database, it followed PRISMA guidelines and the risk of bias was assessed using the QUIN tool. Fracture resistance median values, in Newtons (N), were calculated for the experimental and control groups (95% confidence interval). For pairwise comparison, nonparametric tests (p < 0.05) were applied. Twenty-four in vitro studies met the inclusion criteria. The fracture resistance of the experimental group was 976.0 N and differed (p < 0.05) from all controls. The experimental group showed lower values of fracture resistance than healthy teeth (1459.9 N; p = 0.048) but higher values than non-fiber-reinforced restorations (771.0 N; p = 0.008) and unrestored cavities (386.6 N; p < 0.001). In vitro systematic outcomes evidenced that glass and/or polyethylene fibers improved the fracture resistance of composite restorations.

Particulate Filler and Discontinuous Fiber Filler Resin Composite's Adaptation and Bonding to Intra-Radicular Dentin

The aim of this study was to assess adaptation and bonding to root canal dentin of discontinuous (short) glass fiber-reinforced composite to intra-radicular dentin (DSGFRC).

METHODS

Seventy virgin human teeth were extracted and then endodontically treated; then samples were randomly divided into 7 groups (n = 10), based on the materials' combinations as follows: Group 1, a two-bottle universal adhesive + DSGFRC; Group 2, a single-component universal adhesive + DSGFRC; Groups 3 and 4, the same materials of Goups 1 and 2 were used but after cleaning of the canal walls with 17% EDTA and final irrigation with 5.25% NaOCl Ultrasound Activated (UA); Group 5, traditional prefabricated fiber posts were luted after being silanized with G-Multi Primer; Groups 6 and 7, like Group 5 but after ultrasonic irrigation (UA). All sample roots were cut 1 mm thick (n = 10) to be evaluated regarding root canal adaptation using a light microscope and scanning electron microscope (SEM) and push-out bond strength. These results were statistically analyzed by Kruskal-Wallis analysis of variance by ranks. The level of significance was set at p < 0.05.

RESULTS

Bond strength forces varied between 6.66 and 8.37 MPa and no statistically significant differences were recorded among the groups. By microscopic examination, it was noted that ultrasonic irrigation increased the adaptation of the materials to the dentin surface.

CONCLUSIONS

Within the limitations of this in vitro study, it may be concluded that when DSGFRC was used for intracanal anchorage in the post-endodontic reconstruction, similar push-out retentive force and strength to those of traditional fiber posts cemented with particulate filler resin composite cements were achieved.

Comparison of Different Restoration Techniques for Endodontically Treated Teeth

The aim of the present study is to evaluate the physical properties of endodontically treated teeth restored with five different restorative techniques and materials. Hundred and forty extracted human molar teeth were used. In addition to five restoration groups, specimens with no restorations were used as the negative control, and intact molar teeth were used as the positive control. For flexural strength tests, material specimens were made from 5 different materials using a mould according to ISO 4049 standards. One-way ANOVA revealed that the fracture resistance was significantly affected by the restoration type. SFRC group showed the best fracture resistance values, while lowest values were seen in the GWF group. The test results of flexural strength showed values between 140 and 184 MPa and modulus of elasticity between 6.33 and 18.89 GPa ( $p<0.05$ ). Under the limits of this study, results showed that SFRC can be used to increase the fracture resistance of ETT.

Fatigue performance of endodontically treated premolars restored with direct and indirect cuspal coverage restorations utilizing fiber-reinforced cores

Objectives

The aim of this in vitro study was to investigate the fatigue survival and fracture behavior of endodontically treated (ET) premolars restored with different types of post-core and cuspal coverage restorations.

Materials and methods

MOD cavities were prepared on 108 extracted maxillary premolars. During the endodontic treatment, all teeth were instrumented with rotary files (ProTaper Universal) to the same apical enlargement (F2) and were obturated with a matched single cone obturation. After the endodontic procedure, the cavities were restored with different post-core and overlay restorations (n = 12/group). Three groups (A1–A3) were restored with either conventional composite core (PFC; control) or flowable short-fiber-reinforced composite (SFRC) core with/without custom-made fiber posts and without overlays. Six groups had similar post-core foundations as described above but with either direct PFC (B1–B3) or indirect CAD/CAM (C1–C3) overlays. Fatigue survival was tested for all restorations using a cyclic loading machine until fracture occurred or 50,000 cycles were completed. Kaplan-Meyer survival analysis was conducted, followed by pairwise post hoc comparisons.

Results

None of the restored teeth survived all 50,000. Application of flowable SFRC as luting-core material with fiber post and CAD/CAD overlays (Group C3) showed superior performance regarding fatigue survival (p < 0.05) to all the other groups. Flowable SFRC with fiber post and direct overlay (Group B3) showed superior survival compared to all other direct techniques (p < 0.05), except for the same post-core foundation but without cuspal coverage (Group A3).

Conclusions

Custom-made fiber post and SFRC as post luting core material with or without cuspal coverage performed well in terms of fatigue resistance and survival when used for the restoration of ET premolars.

Clinical relevance

The fatigue survival of direct and indirect cuspal coverage restorations in ET MOD premolars is highly dependent on whether the core build-up is fiber-reinforced or not. The combination of short and long fibers in the form of individualized post-cores seems to offer a favorable solution in this situation.

Effect of fibre-reinforced composite as a post-obturation restorative material on fracture resistance of endodontically treated teeth: A systematic review

Background

Fracture resistance of endodontically treated tooth is affected due to large cavity designs and access cavities and an appropriate material capable to resist fracture plays an important role. This review aims to evaluate the effect of fibre-reinforced composite (FRC) as a post-obturation material on fracture resistance of endodontically treated teeth.

Objectives

To systematically gather and evaluate the fracture resistance of fibre-reinforced composite as a post-obturation restorative material in endodontically treated teeth.

Data Sources

A systematic search was conducted using PubMed, Ebsco Host, Scopus, Google Scholar, Hinari and manual search library resources from 1st Jan 2000 to 30th November 2019 to identify appropriate studies.

Result

A total of 157 articles were examined out of which 55 articles were selected after reading the title. After removing the duplicates, 27 articles were screened for abstract and 1 article was eliminated as it did not meet the eligibility criteria. A thorough reading of the full text of the remaining 26 selected articles was assessed for eligibility. Amongst these, 1 article was then excluded from the study as the full text was not accessible. Lastly, 25 articles were included in the study.

Conclusion

FRC as a core material increases fracture resistance of endodontically treated teeth but they do not have the fracture resistance similar to the intact tooth. Both polyethylene and short fibre-reinforced composites showed greater fracture resistance when compared to glass FRC and restoration without reinforcement. Also, the fracture resistance increases if restored with FRC along with retention slots and are placed on the occlusal third surfaces of cavities. Also, favourable fractures were most commonly seen and it usually occurred at the level of enamel and dentin and adhesive fractures were seen.

Comparison of fiber-reinforced composite and nanohybrid resin impregnated with glass fibers as postendodontic restoration in molars – A clinical study

Background:

Aim:

Materials and Methods:

Statistical Analysis:

Results:

Conclusion:

Strengthening effect of different fiber placement designs on root canal treated and bleached premolars

To evaluate the strengthening effect of five different fibers with different placement designs in root canal treated and intracoronally bleached premolars. Seventy extracted single-rooted premolars were distributed into 7 groups (G1-G7). Group 1 (G1) included the intact (I) teeth as the negative control. Group 2 (G2) included root canal treated, intra-coronally bleached and composite (C) restored teeth as the positive control. In the other five test groups after root canal treatment the teeth were intra-coronally bleached and fiber materials were placed into standard MOD cavities in the following different designs: an intracanal rigid fiber/Reforpost (G3,RF), an intracanal flexible fiber/ Everstick (G4, FF), four intracanal flexible pin fibers/Dentapreg Pin (G5,PF), an intercuspal flexible fiber /Dentapreg SFU (G6, IF) or an intra-coronal horseshoe-shaped/ Dentapreg SFU (G7,CF). All cavities were filled with a microfilled resin composite. Fracture resistance was tested using a universal testing machine under a crosshead speed of 1 mm/minute. One-way ANOVA and Duncan's Multiple Range tests were used for statistical analysis. Fracture types were recorded. The fracture resistance values in descending order were G1(I): 1190.97 N > G6 (IF): 1138.78 N > G5 (PF): 942.45 N > G3 (RF): 737.40 N > G4 (FF):694.29 N > G2 (C): 611.83 N > G7 (CF): 542.78 N. There were statistically significant differences among the groups (p ≤ 0.05). In all groups, repairable coronal oblique fractures were mostly observed. Flexible fibers placed intercuspally exhibited a significantly better strengthening effect than those of the intracanal flexible and rigid fibers (p < 0.05).

Fracture behaviour of MOD restorations reinforced by various fibre-reinforced techniques - An in vitro study

PURPOSE

The aim was to evaluate the fracture resistance of various direct restorative techniques utilizing different fibre-reinforced materials for restoring deep class II. MOD cavities in molar teeth.

MATERIAL AND METHODS

Two hundred forty intact mandibular third molars were randomly divided into twelve groups (n = 20). Except for the control group (G12), deep mesio-occluso-distal (MOD) cavities were prepared all other groups. After adhesive treatment and rebuilding the missing interproximal walls with composite, the specimen were restored with different fibres and a final occlusal layer of composite as follows: composite only (G1), short fibre-reinforced composite (SFRC) (G2), glass fibre net (GFN) on the base of the cavity bucco-lingually (BL) and SFRC (G3), SFRC and GFN on top of it BL (G4), SFRC and occlusal splinting with GFN (G5), GFN circumferentially and SFRC (G6), polyethylene fibres (PF) on the base of the cavity BL and composite (G7), composite and PF on top of it BL (G8), composite and occlusal splinting with PF (G9), PF circumferentially and composite (G10), transcoronal splinting with PF (G11). Fracture-resistance for the restored teeth were tested using universal-testing machine. Fracture thresholds and fracture patterns were measured and evaluated.

RESULTS

The transcoronal splinting (G11) yielded the highest fracture resistance among the restored groups. Groups 1, 3 and 4 showed significantly lower fracture resistance values compared to intact teeth.

CONCLUSION

Incorporating polyethylene or a combination of short and bidirectional glass fibres in certain positions in direct restorations seems to be able to restore the fracture resistance of sound molar teeth.

Fracture resistance and marginal gap formation of post-core restorations: influence of different fiber-reinforced composites

OBJECTIVES

The aim was to explore the fracture behavior and marginal gap within the root canal of endodontically treated (ET) premolars restored with different fiber-reinforced post-core composites (FRCs). Further aim was to evaluate the composite curing at different depths in the canal.

MATERIALS AND METHODS

Eighty-seven intact upper premolars were collected and randomly divided into six groups. After endodontic procedure, standard MOD cavities were prepared and restored with their respective fiber-reinforced post-core materials: group 1: prefabricated unidirectional FRC-post + conventional composite core; group 2: prefabricated unidirectional FRC-post + short fiber composite (SFRC) core; group 3: individually formed unidirectional FRC-post + conventional composite core; group 4: randomly oriented SFRC directly layered as post and core; group 5: individually formed unidirectional FRC + randomly oriented SFRC as post and core. After restorations were completed, teeth (n = 3/group) were sectioned and then stained. Specimens were viewed under a stereo microscope and the percentage of microgaps within the root canal was calculated. Fracture load was measured using universal testing machine.

RESULTS

SFRC application in the root canal (groups 4 and 5) showed significantly higher fracture load (876.7 N) compared to the other tested groups (512-613 N) (p < 0.05). Post/core restorations made from prefabricated FRC-post (group 1) exhibited the highest number of microgaps (35.1%) at the examined interphase in the root canal.

CONCLUSIONS

The restoration of ET premolars with the use of SFRC as post-core material displayed promising performance in matter of microgap and load-bearing capacity.

CLINICAL SIGNIFICANCE

Fracture resistance of ET premolar restored by bilayered composite restoration that includes both SFRC as post-core material and surface conventional resin seems to be beneficial.

Effect of novel restorative materials and retention slots on fracture resistance of endodontically-treated teeth

OBJECTIVES

The aim of this study was to evaluate the fracture resistance of endodontically-treated teeth restored with nano-hybrid composite resin, bulk-fill flowable and short fibre-reinforced-composite in the absence/presence of retention slots.

MATERIALS AND METHODS

One hundred and ten extracted non-carious human mandibular molars received endodontic treatment followed by mesio-occlusodistal (MOD) cavities with 3 ± 0.2 mm thicknesses of buccal and lingual walls. Teeth were divided into two main groups according to the retention slot preparation. The dove-tail retention slots were prepared on the middle of opposite buccal and lingual walls to create mechanical interlocking. Each group was further divided into four sub-groups according to restorative material types: control (no restoration), nano-hybrid composite resin (Filtek™ Z550), bulk-fill flowable (Filtek™ Bulk Fill) and short fibre-reinforced-composite (everX Posterior™). Restored teeth were subjected to compressive load at a strain rate of 1 mm/min. The data were statistically analysed using two-way ANOVA and Tukey's test for multiple comparisons.

RESULTS

The fracture resistance was significantly affected by the presence of the retentive slots and restorative material (p < 0.05). Restored teeth with retentive slots significantly increased the fracture resistance compared with restored teeth without retentive slots (p < 0.05). Short fibre-reinforced-composite with retentive slot cavities had significantly higher fracture resistance values compared with the other test groups (p < 0.05).

CONCLUSIONS

The preparation of retention slots may increase the fracture resistance of endodontically-treated teeth, especially, when restored with short fibre-reinforced composite. The use of short fibre-reinforced composite with retentive slots could be an alternative technique to prevent cuspal fracture on endodontically-treated teeth with MOD cavity.

Finite Element Analysis of the Endodontically-treated Maxillary Premolars restored with Composite Resin along with Glass Fiber Insertion in Various Positions

AIM

This study evaluated the effect of three methods of glass fiber insertion on stress distribution pattern and cusp movement of the root-filled maxillary premolars using finite element method (FEM) analysis.

MATERIALS AND METHODS

A three-dimensional (3 D) FEM model of a sound upper premolar tooth and four models of root-filled upper premolars with mesiocclusodistal (MOD) cavities were molded and restored with: (1) Composite resin only (NF); (2) Composite resin along with a ribbon of glass fiber placed in the occlusal third (OF); (3) Composite resin along with a ribbon of glass fiber placed circumferentially in the cervical third (CF), and (4) Composite resin along with occlusal and circumferential fibers (OCF). A static vertical load was applied to calculate the stress distributions. Structural analysis program by Solidworks were used for FEM analysis. Von-Mises stress values and cusp movements induced by occlusal loading were evaluated.

RESULTS

Maximum Von-Mises stress of enamel occurred in sound tooth, followed by NF, CF, OF and OCF. Maximum Von-Mises stress of dentin occurred in sound tooth, followed by OF, OCF, CF and NF. Stress distribution patterns of OF and OCF were similar. Maximum overall stress values were concentrated in NF. Although stress distribution patterns of NF and CF were found as similar, CF showed lower stress values. Palatal cusp movement was more than buccal cusp in all of the models.

CONCLUSION

The results of our study indicated that while the circumferential fiber had little effect on overall stress concentration, it provided a more favorable stress distribution pattern in cervical region. The occlusal fiber reduced the average stress in the entire structure but did not reduce cuspal movement.

CLINICAL SIGNIFICANCE

Incorporating glass fiber in composite restorations may alter the stress state within the structure depending on fiber position.

Fracture resistance of endodontically treated maxillary premolars restored by silorane-based composite with or without fiber or nano-ionomer

PURPOSE

This in vitro study investigated the fracture resistance of endodontically treated premolars restored using silorane- or methacrylate-based composite along with or without fiber or nano-ionomer base.

MATERIALS AND METHODS

Ninety-six intact maxillary premolars were randomly divided into eight groups (n = 12). G1 (negative control) was the intact teeth. In Groups 2-8, root canal treatment with mesio-occlusodistal preparation was performed. G2 (positive control) was kept unrestored. The other groups were restored using composite resin as follows: G3, methacrylate-based composite (Z250); G4, methacrylate composite (Z250) with polyethylene fiber; G5 and G6, silorane-based composite (Filtek P90) without and with the fiber, respectively; G7 and G8, methacrylate- and silorane-based composite with nano-ionomer base, respectively. After aging period and thermocycling for 1000 cycles, fracture strength was tested and fracture patterns were inspected. The results were analyzed using ANOVA and Tukey HSD tests (α=0.05).

RESULTS

Mean fracture resistance for the eight groups (in Newton) were G1: 1200 ± 169^a, G2: 360 ± 93^b, G3: 632 ± 196^c, G4: 692 ± 195^c, G5: 917 ± 159^d, G6: 1013 ± 125^ad, G7: 959 ± 148^d, G8: 947 ± 105^d (different superscript letters revealed significant difference among groups). Most of the fractures in all the groups were restorable, except Group 3.

CONCLUSION

Silorane-based composite revealed significantly higher strength of the restored premolars compared to that of methacrylate one. Fiber insertion demonstrated no additional effect on the strength of both composite restorations; however, it increased the prevalence of restorable fracture of methacrylate-based composite restored teeth. Using nano-ionomer base under methacrylate-based composite had a positive effect on fracture resistance and pattern. Only fiber-reinforced silorane composite restoration resulted in a strength similar to that of the intact teeth.

How can stress be controlled in endodontically treated teeth? A 3D finite element analysis

The aim of this study was to analyze the stresses that develop by oblique and vertical forces in endodontically treated maxillary second premolars that were restored with resin composite. Additionally, in our study the effects of the different restorative approaches and use of different base materials on stress formation were analyzed using three-dimensional finite element stress analysis. For restoration, the models representing both cusp capping, palatinal cusp capping, standard MOD restoration, and use of woven fiber in occlusal part were prepared. In all models, oblique forces caused more stress than did vertical forces. Materials with low elastic moduli cause high amounts of stress, whereas materials with elastic moduli similar to that of dental tissues cause low amounts of stress. Additional approaches such as cusp capping, functional cusp capping, and woven fiber use do not affect stress formation on the tooth after endodontic treatment.

Fracture Resistance of Endodontically-treated Maxillary Premolars Restored with Composite Resin along with Glass Fiber Insertion in Different Positions

Background and aims

The aim was to evaluate the effect of three methods of fiber insertion on fracture resistance of root-filled maxillary premolars in vitro.

Materials and methods

Sixty extracted human maxillary premolars received endodontic treatment followed by preparation of mesioocclusodistal (MOD) cavities, with gingival cavosurface margin 1.5 mm coronal to the cementoenamel junction (CEJ). Subsequently, the samples were randomly divided into four groups: no-fiber group; occlusal fiber group (fiber was placed in the occlusal third); circumferential fiber group (fiber was placed circumferentially in the cervical third); and dual-fiber group (occlusal and circumferential fibers). Subsequent to restoring with composite resin and thermocycling, a compressive force was applied until fracture. Data was analyzed using one-way ANOVA and Tukey test at significance levels of P < 0.05 and P < 0.02, respectively.

Results

Fiber placement significantly increased fracture resistance. Fracture resistance in the dual-fiber group was significantly higher than that in the circumferential fiber group (P < 0.007); however, there were no significant differences between the dual-fiber and occlusal fiber groups (P = 0.706). The highest favorable fracture rate was observed in the circumferential fiber group (60%).

Conclusion

Composite resin restoration along with glass fiber in the occlusal and gingival thirds can be an acceptable treatment option for restoring root-filled upper premolars.

The reinforcement effect of polyethylene fibre and composite impregnated glass fibre on fracture resistance of endodontically treated teeth: An in vitro study

Aim:

The aim of this study was to evaluate the fracture resistance of endodontically treated maxillary premolars with wide mesio-occluso-distal (MOD) cavities restored with either composite resin, or composite resin reinforced with different types of fibres.

Materials and Methods:

Fifty human maxillary premolars were selected. Five intact teeth served as positive controls. Endodontic therapy was carried out in the remaining forty-five teeth. Standardized MOD cavities were prepared in all the teeth. The teeth were restored with a nanocomposite using an incremental technique. These forty five teeth were randomly divided into three experimental groups (Group A, B and C) (n = 15). The teeth in Group A did not undergo any further procedures. The teeth in Group B and C were reinforced with composite impregnated glass fibre and polyethylene fibre, respectively. Fracture resistance was measured in Newtons (N).

Results:

The positive controls showed the highest mean fracture resistance (811.90 N), followed by Group B (600.49N), Group A (516.96N) and Group C (514.64N), respectively. One Way analysis of variance (ANOVA) test revealed a statistically significant difference between all the groups (P = 0.001). Post-hoc Tukey test revealed a moderately significant difference (P = 0.034) between Control and Group B, and a strongly significant difference between Control and Group A (P = 0.002), and Control and Group C (P = 0.001).

Conclusions:

Endodontic therapy and MOD cavity preparation significantly reduced the fracture resistance of endodontically treated maxillary premolars (P = 0.001). No statistically significant difference was found between the experimental groups (Group A, B and C) (P > 0.1). However, the fracture resistance of the composite impregnated glass fibre reinforced group was much higher than the others.

The effect of composite fiber insertion along with low-shrinking composite resin on cuspal deflection of root-filled maxillary premolars

AIM

The aim of the present study was to evaluate the effect of three methods of composite fiber placement along with siloranebased composite resin on cuspal deflection and fracture strength of root-filled maxillary premolars.

MATERIALS AND METHODS

Mesio-occluso-distal cavities were prepared in 60 extracted premolars subsequent to endodontic treatment. The remaining thickness of buccal and lingual walls at height of contour was 2.5 ± 0.2 mm and the gingival cavosurface margin was 1.5 mm coronal to cementoenamel junction. Subsequent to measurement of primary intercuspal distances, the teeth were randomly divided into four groups. In group 1, the cavities were only filled with Filtek Silorane composite resin. In the other three groups, preimpregnated glass fibers were placed at gingival, middle and occlusal thirds respectively, and the cavities were restored similar to the group 1. Cuspal deflection was recorded in micrometer using a stereomicroscope. Fracture strength of the samples was measured in Newton subsequent to thermocycling. Data was analyzed using Kruskal-Wallis, Mann-Whitney U, one-way ANOVA and post-hoc Tukey tests at a significance level of p < 0.05.

RESULTS

The highest cuspal deflection was recorded in the group 1, and the difference between group 1 and other groups was significant (p < 0.001). Fracture resistance in group 4 was significantly higher than that in other groups (p < 0.001).

CONCLUSION

In restoring root-filled premolars with siloranebased composite resins, cuspal deflection decreased with the use of preimpregnated glass fibers.

CLINICAL SIGNIFICANCE

Using preimpregnated glass fibers along with silorane-based composite resin may lead to better results in cuspal deflection and fracture resistance of endodonticallytreated maxillary premolars.

Effect of two types of composite fibers on fracture resistance of endodontically treated maxillary premolars: an in vitro study

AIM

The aim of the present study was to evaluate the effect of the use of composite fibers (glass fiber and polyethylene fiber) at the gingival third of mesio-occlusodistal (MOD) cavities on the fracture resistance of endodontically treated premolars.

MATERIALS AND METHODS

A total of 45 extracted premolars underwent endodontic treatment. MOD cavities, 2.5 ± 0.2 mm thick at the buccal and lingual heights of contour, were prepared, with the gingival cavosurface margin 1.5 mm coronal to the cementoenamel junction. Then the teeth were randomly divided into three groups. In group 1, the cavities were restored with Z250 composite resin without the use of any fibers. In groups 2 and 3, the teeth were restored in the same manner as that in group 1 after placement of glass fiber and polyethylene fiber at the gingival third of the cavities, respectively. Subsequent to thermocycling, fracture resistance of the specimens was measured in Newton (N).

STATISTICAL ANALYSIS

Data were analyzed with one-way ANOVA and a post hoc Tukey test at a significance level of p < 0.05.

RESULTS

There were significant differences in the means of fracture resistance values between the three groups (p = 0.001). Statistically significant differences were observed in the fracture resistance between group 2 and groups 1 and 3 (p < 0.05). However, the differences between groups 1 and 3 were not significant (p = 0.25).

CONCLUSION

The type of fiber influenced the fracture resistance of endodontically treated human premolars.

CLINICAL SIGNIFICANCE

Using glass and/or polyethylene fibers in the gingival third of composite restorations leads to different results in fracture resistance of endodontically treated maxillary premolars.