Effects of a Novel Hydration Accelerant on the Biological and Mechanical Properties of White Mineral Trioxide Aggregate

Host defense peptides combined with MTA extract increase the repair in dental pulp cells: in vitro and ex vivo study

Host Defense Peptides (HDPs) have, in previous studies, been demonstrating antimicrobial, anti-inflammatory, and immunomodulatory capacity, important factors in the repair process. Knowing these characteristics, this article aims to evaluate the potential of HDPs IDR1018 and DJK-6 associated with MTA extract in the repair process of human pulp cells. Antibacterial activity of HDPs, MTA and HDPs combined with MTA in Streptococcus mutans planktonic bacteria and antibiofilm activity was evaluated. Cell toxicity was assayed with MTT and cell morphology was observed by scanning electron microscopy (SEM). Proliferation and migration of pulp cells were evaluated by trypan blue and wound healing assay. Inflammatory and mineralization related genes were evaluated by qPCR (IL-6, TNFRSF, DSPP, TGF-β). Alkaline phosphatase, phosphate quantification and alizarin red staining were also verified. The assays were performed in technical and biological triplicate (n = 9). Results were submitted for the calculation of the mean and standard deviation. Then, normality verification by Kolmogorov Smirnov test, analyzing one-way ANOVA. Analyses were considered at a 95% significance level, with a p-value < 0.05. Our study demonstrated that HDPs combined with MTA were able to reduce biofilms performed in 24 h and biofilm performed over 7 days S. mutans biofilm (p < 0.05). IDR1018 and MTA, as well as their combination, down-regulated IL-6 expression (p < 0.05). Tested materials were not cytotoxic to pulp cells. IDR1018 induced high cell proliferation and combined with MTA induced high cellular migration rates in 48 h (p < 0.05). Furthermore, the combination of IDR1018 and MTA also induced high expression levels of DSPP, ALP activity, and the production of calcification nodules. So, IDR-1018 and its combination with MTA could assist in pulp-dentine complex repair process in vitro.

Additive Manufacturing of Caffeic Acid-Inspired Mineral Trioxide Aggregate/Poly-ε-Caprolactone Scaffold for Regulating Vascular Induction and Osteogenic Regeneration of Dental Pulp Stem Cells

Mineral trioxide aggregate (MTA) is a common biomaterial used in endodontics regeneration due to its antibacterial properties, good biocompatibility and high bioactivity. Surface modification technology allows us to endow biomaterials with the necessary biological targets for activation of specific downstream functions such as promoting angiogenesis and osteogenesis. In this study, we used caffeic acid (CA)-coated MTA/polycaprolactone (PCL) composites and fabricated 3D scaffolds to evaluate the influence on the physicochemical and biological aspects of CA-coated MTA scaffolds. As seen from the results, modification of CA does not change the original structural characteristics of MTA, thus allowing us to retain the properties of MTA. CA-coated MTA scaffolds were shown to have 25% to 55% higher results than bare scaffold. In addition, CA-coated MTA scaffolds were able to significantly adsorb more vascular endothelial growth factors (p < 0.05) secreted from human dental pulp stem cells (hDPSCs). More importantly, CA-coated MTA scaffolds not only promoted the adhesion and proliferation behaviors of hDPSCs, but also enhanced angiogenesis and osteogenesis. Finally, CA-coated MTA scaffolds led to enhanced subsequent in vivo bone regeneration of the femur of rabbits, which was confirmed using micro-computed tomography and histological staining. Taken together, CA can be used as a potently functional bioactive coating for various scaffolds in bone tissue engineering and other biomedical applications in the future.

Concentrated MTA Repair HP reduced biofilm and can cause reparative action at a distance

AIM

To evaluate in vitro whether MTA Repair HP can induce repair processes at a distance, including its effects on biofilm, cell viability, migration, production of TGF-β, phosphate and ALP, evaluated through MTA diluted extracts.

METHODOLOGY

Initially, antibacterial tests were performed with the bacterium Streptococcus mutans (ATCC 25175) in the presence of MTA extracts (dilutions of 1:1, 1:2 and 1:4). Growth inhibition assay by microdilution in broth, antibiofilm plate assay of young biofilm and antibiofilm assay in confocal microscopy of mature biofilm were carried out. Then, pulp cells were stimulated in the presence of several MTA dilutions, and cell viability (MTT assay), proliferation and migration capacity (scratch assay) were evaluated. To evaluate the capacity of 1:1, 1:2 and 1:4 dilutions of MTA Repair HP to promote the production of important agents of odontogenic differentiation and mineralization, ALP activity, TGF-β secretion and phosphate quantification were measured. Statistical differences were verified using one-way and two-way anova and Tukey's post-tests.

RESULTS

The test dilutions of MTA Repair HP did not inhibit planktonic S. mutans growth but were able to reduce young and mature S. mutans biofilm (p < 0.001). In addition, none of the MTA Repair HP dilutions was cytotoxic for pulp cells. The 1:2 and 1:4 dilutions of MTA Repair HP induced migration and proliferation of pulp cells (p < 0.05). ALP activity and TGF-β secretion were independent of the tested dilution (p < 0.001). Diluted 1:4 MTA Repair HP produced less phosphate than the more concentrated 1:1 and 1:2 MTA dilutions (p < 0.001).

CONCLUSIONS

Undiluted MTA Repair HP reduced S. mutans biofilm, when compared to 1:2 and 1:4 MTA dilutions. Furthermore, none of the tested dilutions was cytotoxic to pulp cells. MTA Repair HP promoted cell migration and proliferation at a distance, assessed through the dilution of the MTA. Even from a distance, MTA Repair HP has the ability to participate in some events related to repair, such as migration, proliferation and TGF production.

Caffeic Acid-coated Nanolayer on Mineral Trioxide Aggregate Potentiates the Host Immune Responses, Angiogenesis, and Odontogenesis

INTRODUCTION

The aim of this study was to investigate whether mineral trioxide aggregate (MTA) can be modified with caffeic acid (CA) to form caffeic acid/mineral trioxide aggregate (CAMTA) cement and to evaluate its physicochemical and biological properties as well as its capability in immune suppression and angiogenesis.

METHODS

MTA was immersed in trishydroxymethyl aminomethane buffer with CA to allow coating onto MTA powders. X-ray diffractometry and tensile stress-strain tests were conducted to assess for physical characteristics of CAMTA and to evaluate for successful modification of MTA. Then, the CAMTA cement was immersed in simulated body fluid to evaluate its hydroxyapatite formation capabilities and Si release profiles. In addition, RAW 264.7 cells and human dental pulp stem cells were used to evaluate CAMTA's immunosuppressive capabilities and cell responses, respectively. hDPSCs were also used to assess CAMTA's angiogenic capabilities.

RESULTS

The X-ray diffractometry results showed that CA can be successfully coated onto MTA without disrupting or losing MTA's original structural properties, thus allowing us to retain the initial advantages of MTA. CAMTA was shown to have higher mechanical properties compared with MTA and had rougher pitted surfaces, which were hypothesized to lead to enhanced adhesion, proliferation, and secretion of angiogenic- and odontogenic-related proteins. In addition, it was found that CAMTA was able to enhance hydroxyapatite formation and immunosuppressive capabilities compared with MTA.

CONCLUSIONS

CAMTA cements were found to have improved physicochemical and biological characteristics compared with their counterpart. In addition, CAMTA cements had enhanced odontogenic, angiogenic, and immunosuppressive properties compared with MTA. All of the results of this study proved that CAMTA cements could be a biomaterial for future clinical applications and tissue engineering use.

A Silk Fibroin Based Hydration Accelerator for Root Canal Filling Materials

Mineral trioxide aggregate (MTA) is widely used in various dental endodontic applications such as root-end filling, furcal perforation repair, and vital pulp therapy. In spite of many attempts to improve handling properties and reduce the discoloration of MTA, the ideal root canal filling material has yet to be fully developed. The objective of this study was to investigate the setting time, mechanical properties, and biocompatibility of MTA set by a silk fibroin solution. A 5 wt% silk fibroin (SF) solution (a novel hydration accelerant) was used to set SavDen® MTA and ProRoot® white MTA (WMTA). Changes in setting time, diametral tensile strength (DTS), material crystallization, in vitro cell viability, and cell morphology were assessed by Vicat needle measurement, a universal testing machine, scanning electron microscopy (SEM), and WST-1 assay, respectively. The initial setting time of ProRoot® MTA and SavDen® MTA experienced a drastic decrease of 83.9% and 42.1% when deionized water was replaced by 5 wt% SF solution as the liquid phase. The DTS of SavDen® MTA showed a significant increase after set by the SF solution in 24 h. A human osteoblast-like cell (MG-63)-based WST-1 assay revealed that both ProRoot® MTA and SavDen® MTA hydrated using SF solution did not significantly differ (p > 0.05) in cell viability. MG-63 cells with pseudopodia attachments and nuclear protrusions represent a healthier and more adherent status on the surface of MTA when set with SF solution. The results suggest that the 5 wt% SF solution may be used as an alternative hydration accelerant for MTA in endodontic applications.

Biocompatibility of a New Antibacterial Compound and its Effect on the Mechanical Properties of Flowable Dental Composites (Animal Study)

STATEMENT OF THE PROBLEM

Recently, new compound of 3, 5-dimethyl-1-thiocarboxamide pyrazole has been composed with excellent antibacterial property. Biocompatibility and its effects on mechanical properties of dental composites should be considered before clinical use.

PURPOSE

The purpose of this study was to evaluate the biocompatibility of 3, 5-dimethyl-1-thiocarboxamide pyrazole as a new antibacterial compound and its effect on the mechanical properties of dental composites.

MATERIALS AND METHOD

In this experimental study, a new antibacterial compound was synthesis by reaction between Thiosemicarbazide and 2, 4-Pentandione and tested on thirty male albino Wistar rats weighting 200-250gr. Rats were randomly divided into 3 groups of 10, each rat received 3 implants of 3,5-dimethyl-1-thiocarboxamide pyrazole, penicillin v and empty polyethylene tube. A pathologist, who was unaware of types of tested materials and timing, performed the examination of specimens. The depth of cure and flexural strength of resin composite was measured using Iso4049 standard technique. Compressive strength was determined according to Iso9917 standard.

RESULTS

This compound was biocompatible and there was no significant difference in flexural strength and compressive strength of the composites containing 1% of this compound with the control group (p> 0.05).

CONCLUSION

The 3, 5-dimethyl-1-thiocarboxamide pyrazole with a concentration of 1% in flowable composites can be very effective in preventing secondary caries.

Effects of Milling Time, Zirconia Addition, and Storage Environment on the Radiopacity Performance of Mechanically Milled Bi2O3/ZrO2 Composite Powders

Mineral trioxide aggregate (MTA) typically consists of Portland cement (75 wt.%), bismuth oxide (20 wt.%), and gypsum (5 wt.%) and is commonly used as endodontic cement. Bismuth oxide serving as the radiopacifying material reveals the canal filling effect after clinical treatment. In the present study, bismuth/zirconium oxide composite powder was prepared by high energy ball milling of (Bi₂O₃)_100−x (ZrO₂)_x (x = 5, 10, 15, and 20 wt.%) powder mixture and used as the radiopacifiers within MTA. The crystalline phases of the as-milled powders were examined by the X-ray diffraction technique. The radiopacities of MTA-like cements prepared by using as-milled composite powders (at various milling stages or different amount of zirconia addition) were examined. In addition, the stability of the as-milled powders stored in an ambient environment, an electronic dry box, or a glove box was investigated. The experimental results show that the as-milled powder exhibited the starting powder phases of Bi₂O₃ and ZrO₂ and the newly formed δ-Bi_7.38Zr_0.62O_2.31 phase. The longer the milling time or the larger the amount of the zirconia addition, the higher the percentage of the δ-Bi_7.38Zr_0.62O_2.31 phase in the composite powder. All the MTA-like cements prepared by the as-milled powder exhibited a radiopacity higher than 4 mmAl that is better than the 3 mmAl ISO standard requirement. The 30 min as-milled (Bi₂O₃)₉₅(ZrO₂)₅ composite powder exhibited a radiopacity of 5.82 ± 0.33 mmAl and degraded significantly in the ambient environment. However, storing under an oxygen- and humidity-controlled glove box can prolong a high radiopacity performance. The radiopacity was 5.76 ± 0.08 mmAl after 28 days in a glove box that was statistically the same as the original composite powder.

The setting mechanism of mineral trioxide aggregate

Mineral trioxide aggregate (MTA) is a powder containing calcium silicate composed of hydrophilic particles which harden at the presence of moisture. MTA was initially introduced as a root end filling material. Due its practical advantages that include superior biocompatility, effective sealing capability, and the ability to improve regeneration of the pulp and peripheral root tissues, it is used in different clinical applications such as pulp capping, apexification, pulpotomy and perforation. Despite being a promising material in endodontic treatment, MTA is not commonly used. Long setting time is the main clinical disadvantage of MTA. The aim of this review is to provide an overview of the current literature concerning the setting mechanism of MTA, accelerators and devices used to evaluate various steps of the hardening process.

A comparative evaluation of the effect of various additives on selected physical properties of white mineral trioxide aggregate

Aims:

This study examined the setting time, compressive strength, and pH of white mineral trioxide aggregate (MTA) mixed with various additives: Calcium chloride (CaCl₂), calcium formate (CaF), disodium hydrogen orthophosphate (Na₂HPO₄).

Materials and Methods:

Group 1 (Control) was obtained by mixing MTA with distilled water. In Groups 2 and 3, MTA containing 10% CaCl₂ and 20% CaF, respectively, was mixed with distilled water. In Group 4, MTA was mixed with 15% Na₂HPO₄. Setting time, compressive strength, and pH of each group were examined.

Statistical Analysis Used:

Analysis was done using Statistical Package for Social Sciences (SPSS) version 14. A P-value < 0.05 was considered statistically significant. Comparison of mean values was done using analysis of variance (ANOVA) with post-hoc Games-Howell test.

Results:

The setting time of test groups were significantly shorter than that of control group (P < 0.001). The compressive strengths of test groups were lower than that of control group (P < 0.001). The pH value obtained for Groups 3 and 4 were higher than that of the control group (P < 0.001).

Conclusions:

Study result showed that additives significantly reduced the setting time of MTA and also maintained the pH at a high value. However, there was not much improvement in the compressive strength of the material.

Effect of additives on mineral trioxide aggregate setting reaction product formation

INTRODUCTION

Mineral trioxide aggregate (MTA) sets via hydration of calcium silicates to yield calcium silicate hydrates and calcium hydroxide (Ca[OH]2). However, a drawback of MTA is its long setting time. Therefore, many additives have been suggested to reduce the setting time. The effect those additives have on setting reaction product formation has been ignored. The objective was to examine the effect additives have on MTA's setting time and setting reaction using differential scanning calorimetry (DSC).

METHODS

MTA powder was prepared with distilled water (control), phosphate buffered saline, 5% calcium chloride (CaCl2), 3% sodium hypochlorite (NaOCl), or lidocaine in a 3:1 mixture and placed in crucibles for DSC evaluation. The setting exothermic reactions were evaluated at 37°C for 8 hours to determine the setting time. Separate samples were stored and evaluated using dynamic DSC scans (37°C→640°C at10°C/min) at 1 day, 1 week, 1 month, and 3 months (n = 9/group/time). Dynamic DSC quantifies the reaction product formed from the amount of heat required to decompose it. Thermographic peaks were integrated to determine enthalpy, which was analyzed with analysis of variance/Tukey test (α = 0.05).

RESULTS

Isothermal DSC identified 2 main exothermal peaks occurring at 44 ± 12 and 343 ± 57 minutes for the control. Only the CaCl2 additive was an accelerant, which was observed by a greater exothermic peak at 101 ± 11 minutes, indicating a decreased setting time. The dynamic DSC scans produced an endothermic peak around 450°C-550°C attributed to Ca(OH)2 decomposition. The use of a few additives (NaOCl and lidocaine) resulted in significantly less Ca(OH)2 product formation.

CONCLUSIONS

DSC was used to discriminate calcium hydroxide formation in MTA mixed with various additives and showed NaOCl and lidocaine are detrimental to MTA reaction product formation, whereas CaCl2 accelerated the reaction.

Comparative cell attachment, cytotoxicity and antibacterial activity of radiopaque dicalcium silicate cement and white-coloured mineral trioxide aggregate

AIM

To comparatively examine the cell attachment, cytotoxicity, and antibacterial activity of radiopaque dicalcium silicate cement (RDSC) and ProRoot white-coloured mineral trioxide aggregate (WMTA).

METHODOLOGY

AlamarBlue was used for real-time and repeated monitoring of MG63 cell attachment on freshly mixed and set cements. The pH changes in the growth medium at different time-points were also measured. Cytotoxicity evaluation was performed according to ISO 10993-5 specifications. The antibacterial activity of the cement specimens was evaluated using Enterococcus faecalis.

RESULTS

There were no significant differences (P > 0.05) between the two cements for cell attachment either in the fresh groups or in the set groups at all culture times. Neither freshly mixed group nor set groups had significant pH differences. In the case of cytotoxicity, RDSC was significantly (P < 0.05) superior to WMTA at 12 and 24 h of incubation. RDSC and WMTA possessed similar antimicrobial activity, substantiated by the formation of growth inhibition zones and bacteriostasis ratio in E. faecalis strains.

CONCLUSIONS

The cell attachment, cytotoxicity and antibacterial efficacy of RDSC were comparable to those reported for ProRoot WMTA. The results of the current study suggest that this RDSC could be used as a root-end filling material and root sealer.

Effect of accelerants on the immediate and the delayed sealing ability of mineral trioxide aggregate when used as an apical plug: An in vitro study

Aim:

To evaluate and compare the influence of various accelerators, 15% disodium hydrogen phosphate (Na₂HPO₄), 10% calcium chloride (CaCl₂) and 23.1 wt% calcium lactate gluconate (CLG), on the immediate (after 72 h) and delayed (after 2 months) sealing ability of white ProRoot mineral trioxide aggregate (WMTA) when it is used as an apical plug.

Materials and Methods:

Eighty, single-rooted mandibular premolars were instrumented and standardized artificial open apices were created. The samples were then randomly assigned into four experimental groups and two control groups. WMTA was mixed with the respective accelerators and an apical plug of 4-mm thickness was fabricated. The remaining canal spaces were then backfilled. The samples were stored for the stipulated time periods and then immersed in 0.2% Rhodamine B solution for 72 h. Dye leakage was analyzed using a stereomicroscope.

Results:

Mean microleakage values of all experimental groups revealed that MTA + 23.1 wt% CLG showed the least leakage, followed by MTA + 15% Na₂HPO₄ and MTA + 10% CaCl₂ with MTA + deionized water showing the maximum leakage at both the time intervals (P < 0.001). All the samples stored for a period of 2 months showed less leakage as compared with the samples stored for 72 h (P < 0.05).

Conclusions:

It was found that all three accelerators significantly accelerated the set of WMTA, of which 23.1 wt% CLG showed the best results, followed by 15% Na₂HPO₄ and 10% CaCl₂. The sealing ability of all the experimental groups was significantly superior after 2 months as compared with that after 72 h.