Role of Iron on Physical and Mechanical Properties of Brushite Cements, and Interaction with Human Dental Pulp Stem Cells

Improving the physical, mechanical and biological properties of brushite cements (BrC) is of a great interest for using them in bone and dental tissue engineering applications. The objective of this study was to incorporate iron (Fe) at different concentrations (0.25, 0.50, and 1.00 wt.%) to BrC and study the role of Fe on phase composition, setting time, compressive strength, and interaction with human dental pulp stem cells (hDPSCs). Results showed that increase in Fe concentration increases the β-tricalcium phosphate (β-TCP)/ dicalcium phosphate dihydrate (DCPD) ratio and prolongs the initial and final setting time due to effective role of Fe on stabilizing the β-TCP crystal structure and retarding its dissolution kinetic, in a dose dependent manner where the highest setting time was recorded for 1.00 wt.% Fe-BrC sample. Addition of low concentrations of Fe (0.25 and 0.50 wt.%) did not have adverse effect on compressive strength and strength was in the range of 5.7-7.05 (±~1.4) MPa; however, presence of 1.00 wt.% Fe decreases the strength of BrC from 7.05 ± 1.57 MPa to 3.12 ± 1.06 MPa. Interaction between the BrCs and hDPSCs was evaluated by cell proliferation assay, scanning electron microscopy, and live/dead staining. Low concentrations of 0.25, and 0.50 wt.% of Fe did not have any adverse effect on cell attachment and proliferation; while significant decrease in cellular activity was evident in BrC samples doped with 1.00 wt. %. Together, these data show that low concentrations of Fe (equal or less than 0.50 wt. %) can be safely added to BrC without any adverse effect on physical, mechanical and biological properties in presence of hDPSCs.

Effect of Baghdadite Substitution on the Physicochemical Properties of Brushite Cements

Brushite cements have been clinically used for irregular bone defect filling applications, and various strategies have been previously reported to modify and improve their physicochemical properties such as strength and injectability. However, strategies to address other limitations of brushite cements such as low radiopacity or acidity without negatively impacting mechanical strength have not yet been reported. In this study, we report the effect of substituting the beta-tricalcium phosphate reactant in brushite cement with baghdadite (Ca₃ZrSi₂O₉), a bioactive zirconium-doped calcium silicate ceramic, at various concentrations (0, 5, 10, 20, 30, 50, and 100 wt%) on the properties of the final brushite cement product. X-ray diffraction profiles indicate the dissolution of baghdadite during the cement reaction, without affecting the crystal structure of the precipitated brushite. EDX analysis shows that calcium is homogeneously distributed within the cement matrix, while zirconium and silicon form cluster-like aggregates with sizes ranging from few microns to more than 50 µm. X-ray images and µ-CT analysis indicate enhanced radiopacity with increased incorporation of baghdadite into brushite cement, with nearly a doubling of the aluminium equivalent thickness at 50 wt% baghdadite substitution. At the same time, compressive strength of brushite cement increased from 12.9 ± 3.1 MPa to 21.1 ± 4.1 MPa with 10 wt% baghdadite substitution. Culture medium conditioned with powdered brushite cement approached closer to physiological pH values when the cement is incorporated with increasing amounts of baghdadite (pH = 6.47 for pure brushite, pH = 7.02 for brushite with 20 wt% baghdadite substitution). Baghdadite substitution also influenced the ionic content in the culture medium, and subsequently affected the proliferative activity of primary human osteoblasts in vitro. This study indicates that baghdadite is a beneficial additive to enhance the radiopacity, mechanical performance and cytocompatibility of brushite cements.

Effect of additives on mineral trioxide aggregate setting reaction product formation

INTRODUCTION

Mineral trioxide aggregate (MTA) sets via hydration of calcium silicates to yield calcium silicate hydrates and calcium hydroxide (Ca[OH]2). However, a drawback of MTA is its long setting time. Therefore, many additives have been suggested to reduce the setting time. The effect those additives have on setting reaction product formation has been ignored. The objective was to examine the effect additives have on MTA's setting time and setting reaction using differential scanning calorimetry (DSC).

METHODS

MTA powder was prepared with distilled water (control), phosphate buffered saline, 5% calcium chloride (CaCl2), 3% sodium hypochlorite (NaOCl), or lidocaine in a 3:1 mixture and placed in crucibles for DSC evaluation. The setting exothermic reactions were evaluated at 37°C for 8 hours to determine the setting time. Separate samples were stored and evaluated using dynamic DSC scans (37°C→640°C at10°C/min) at 1 day, 1 week, 1 month, and 3 months (n = 9/group/time). Dynamic DSC quantifies the reaction product formed from the amount of heat required to decompose it. Thermographic peaks were integrated to determine enthalpy, which was analyzed with analysis of variance/Tukey test (α = 0.05).

RESULTS

Isothermal DSC identified 2 main exothermal peaks occurring at 44 ± 12 and 343 ± 57 minutes for the control. Only the CaCl2 additive was an accelerant, which was observed by a greater exothermic peak at 101 ± 11 minutes, indicating a decreased setting time. The dynamic DSC scans produced an endothermic peak around 450°C-550°C attributed to Ca(OH)2 decomposition. The use of a few additives (NaOCl and lidocaine) resulted in significantly less Ca(OH)2 product formation.

CONCLUSIONS

DSC was used to discriminate calcium hydroxide formation in MTA mixed with various additives and showed NaOCl and lidocaine are detrimental to MTA reaction product formation, whereas CaCl2 accelerated the reaction.