Prognostic Factors of Clinical Outcomes in Endodontic Microsurgery: A Prospective Study

Endodontic Microsurgery Outcomes over 10 Years and Associated Prognostic Factors: A Retrospective Cohort Study

INTRODUCTION

This retrospective cohort study aimed to evaluate long-term healing outcomes (10-17.5 years) after contemporary endodontic microsurgery (EMS) and identify the associated prognostic factors.

METHODS

Clinical and radiographic data of an EMS cohort (2006-2013) from the electronic database of the dental hospital were reviewed retrospectively by 2 independent examiners to determine their survival and healing outcomes, and potential prognostic factors were analyzed by Cox proportional hazards regression and logistic regression (α = 0.05).

RESULTS

Through strict inclusion and exclusion criteria and 721 EMS-treated teeth in the cohort, 309 (42.9%) were included (male = 35.0%; female = 65.0%; age = 45.83 ± 15.53 years) with a mean final follow-up of 152.26 ± 26.37 months (range, 120-211 months; median = 148 months). Clinical and radiographic assessments found an 80.5% 10-year survival rate with 63.4% of success. Collectively, tooth type, tooth mobility, preoperative lesion size, clinical crown-to-root ratio, and crown restorations at follow-up were significantly associated with long-term success and survival over 10 years.

CONCLUSIONS

The preoperative status and condition of the tooth including its alveolar bone support and adequate full-crown restorations may be relevant prognostic determinants of success and survival after EMS over time.

Endodontic Microsurgery With an Autonomous Robotic System: A Clinical Report

INTRODUCTION

Endodontic microsurgery (EMS) requires minimally invasive osteotomy and accurate root-end resection, which can be challenging in many instances. Evidence suggests that autonomous robotic systems can significantly enhance the precision of dental implantation. The aim of this case report is to introduce a novel EMS technique that employs robot-guided osteotomy and root resection procedures.

METHODS

A 59-year-old man was diagnosed with previously treated, symptomatic apical periodontitis in the mandibular left first molar. Patient data were used to integrate a digital model into preoperative planning software to design the surgical plan. The robotic system utilizes spatial alignment techniques for registration, guiding the robotic arm to autonomously perform a 3-mm osteotomy and root-end resection, based on the surgical plan. After completing the resection, the clinician confirmed the absence of cracks or root fractures and subsequently performed root-end preparation and filling under a microscope.

RESULTS

To the best of our knowledge, this case marks the first use of autonomous robotic assistance in EMS.

CONCLUSIONS

Utilizing an autonomous robotic system could enable precise apicoectomy in patients with intact cortical plates, thus facilitating successful EMS procedures. This has the potential to minimize errors caused by operator inexperience and mitigate the risks associated with excessive bone removal.

Robot-Assisted and Haptic-Guided Endodontic Surgery: A Case Report

There has been a significant increase in robot-assisted dental procedures in the past decade, particularly in the area of robot-assisted implant placement. The objective of this case report was to assess the initial use of the Yomi Robot's assistance and haptic guidance during endodontic microsurgery. The robot was used during the osteotomy and root-end resection of the first and second upper left premolars. The report aims to inform clinicians of the initial implementation of this cutting-edge technology in endodontics and its potential to enhance endodontic microsurgery. The Yomi Robot was used in performing osteotomy and root-end resection during apical surgery in a patient presenting with symptomatic upper left first and second premolars. The treatment procedure was decided after clinical examination, chart data, and radiographic examinations, which showed periapical lesions on both premolars, taking into consideration the failed endodontic retreatment on the first premolar, the post and ceramic coronal restorations on both teeth, and the desire of the patient to save them. The Yomi Robot system provides auditory, visual, and physical guidance to clinicians during surgery while using a cone-beam computed tomography scan for precision planning with greater accuracy and minimized potential for human error. Further studies are needed to prepare a protocol for robotic-guided procedures in endodontics.

The outcome of combined use of iRoot BP Plus and iRoot SP for root-end filling in endodontic microsurgery: a randomized controlled trial

OBJECTIVES

Root-end filling is important for the clinical outcome of endodontic microsurgery. Our previous study showed that combined application of iRoot BP Plus Root Repair Material (BP-RRM) and iRoot SP Injectable Root Canal Sealer (SP-RCS) in root-end filling exhibited better apical sealing as compared to the application of BP-RRM alone. The aim of this randomized controlled clinical trial was to evaluate the effect of the combined use of BP-RRM and SP-RCS on the prognosis of teeth with refractory periapical diseases after endodontic microsurgery.

MATERIALS AND METHODS

240 teeth with refractory periapical diseases scheduled for endodontic microsurgery were randomly divided into BP-RRM/SP-RCS group (n = 120) and BP-RRM group (n = 120). The patients were followed up at 3 months, 6 months, and 12 months after endodontic microsurgery. Pre- and post-operative clinical and radiographic examinations were performed to evaluate the treatment outcome. The 1-year success rate of endodontic microsurgery in BP-RRM/SP-RCS and BP-RRM groups was compared by Chi-square test. Factors that might impact the prognosis were further analyzed using Chi-square test or Fisher's exact test.

RESULTS

A total of 221 teeth completed the 12-month follow-up. The 1-year success rates of the BP-RRM/SP-RCS and BP-RRM groups were 94.5% (104/110) and 92.8% (103/111), respectively. The combined use of BP-RRM and SP-RCS achieved a clinical outcome comparable to BP-RRM alone (P = 0.784). Tooth type (P = 0.002), through-and-through/apico-marginal lesion (P = 0.049), periodontal status (P < 0.0001), and Kim's lesion classification (P < 0.0001) were critical factors associated with the 1-year success of endodontic microsurgery.

CONCLUSIONS

The combined use of BP-RRM and SP-RCS is a practicable method for root-end filling in endodontic microsurgery with a satisfactory 1-year clinical outcome.

CLINICAL RELEVANCE

The combined application of BP-RRM and SP-RCS in EMS is an effective root-end filling method with a satisfactory 1-year clinical outcome.

TRIAL REGISTRATION

This study was registered in the Chinese Clinical Trial Registry (ChiCTR2100052174).

The effect of hard tissue defects on the clinical outcome of endodontic microsurgery: a systematic review and meta-analysis

OBJECTIVES

The purpose of this systematic review was to appraise the existing literature on the effect of hard tissue defects on the clinical outcome of endodontic microsurgery (EMS).

METHODS

MEDLINE (PubMed), Embase, Web of Science, Cochrane Library and grey literature were searched from January 2000 to May 2023. Study selection and data extraction were performed in duplicate. Eligible studies were critically appraised for the risk of bias using the Cochrane Risk of bias tool. The quality of evidence was assessed using GRADE. Review Manager (RevMan Computer program Version 5.4, The Cochrane Collaboration, 2020) was utilized and the Mantel Haenszel fixed or random effects model was applied, depending on the heterogeneity of the studies. Meta-analysis was performed to estimate the Risk ratio (RR) and 95% Confidence Interval (CIs) to correlate the effects of these factors on treatment outcomes.

RESULTS

Nineteen studies were included. The EMS overall pooled success rate was 84.5%. Five characteristics of hard tissue were identified. The size of the lesion (Small ≤ 5 mm: 78.4% vs. Large > 5 mm: 63.3%, RR = 1.12, 95% CI 1.00-1.26, P ≤ .05), significantly affected the outcomes of EMS. Endodontic lesions exhibited slightly better outcomes than endodontic-periodontal lesions (81.4% vs. 68.2%, RR = 1.14 95% CI 0.98-1.33, P > .05). Cases with the height of the buccal bone > 3 mm also exhibited slightly better outcomes (91.5% vs. 71.4%, RR = 1.20, 95% CI 0.88-1.62, P > .05). Additionally, through and through lesions exhibited better outcomes when grafting was completed during the EMS procedure both in 2D (RR = 1.12 95% CI 0.97-1.29, P > .05) and 3D evaluation ((RR = 1.28 95% CI 0.69-2.37 P > .05). The overall quality of evidence was graded as low to high.

CONCLUSION

With a low to high quality of evidence, the size of the lesion is a key prognostic variable that significantly affects the outcome of EMS, as lesions ≤ 5 mm exhibit better outcomes as compared to larger lesions.

CLINICAL SIGNIFICANCE

The presence of hard tissue defects can affect the outcome of endodontic microsurgery (EMS). The presented data can aid the clinicians' decision-making process by examining certain pre-operative prognostic variables, when considering EMS as a treatment option. Clinical cases with more favorable hard tissue characteristics lead to a better prognosis in EMS.

Efficacy of mixture of injectable-platelet-rich fibrin and type-1 collagen particles on the closure of through-and-through periapical bone defects: A randomized controlled trial

AIM

To determine the efficacy of a combination of injectable-platelet-rich fibrin and type-1 collagen particles on the healing of through-and-through periapical bone defect and subsequent closure of bony window.

METHODOLOGY

The clinical trial was registered in ClinicalTrials.gov (NCT04391725). Thirty-eight individuals with radiographic evidence of periapical radiolucency in maxillary anterior teeth and confirmed loss of palatal cortical plates in cone beam computed tomographic imaging were randomly assigned to either the experimental group (n = 19) or the control group (n = 19). A mixture of i-PRF and collagen as a graft was applied to the defect in adjunct to periapical surgery in the experimental group. No guided bone regeneration procedures were used in the control group. The healing was evaluated using Molven's (2D) and modified PENN 3D (3D) criteria. Percentage reduction of the buccal and palatal bony window area, and complete closure of through-and-through periapical bony window (tunnel defect) were assessed using Radiant Diacom viewer software (Version 4.0.2). The reduction in the periapical lesion area and volume was measured using Corel DRAW and ITK Snap software.

RESULTS

Thirty-four participants (18 and 16 in the experimental and control groups respectively) reported for follow-up at 12 months. There was 96.9% and 97.96% reduction of buccal bony window area in the experimental and control groups respectively. Similarly, palatal window showed 99.03% and 100% reduction in the experimental and control groups respectively. No significant difference in both buccal and palatal window reduction was noticed between the groups. A total of 14 cases (seven in the experimental group and seven in the control group) showed complete closure of through-and-through bony window. No significant difference in clinical, 2D and 3D radiographic healing, percentage reduction in area and volume was observed between the experimental and control groups (p > .05). Neither the area nor the volume of lesion, and the size of buccal or palatal window had significant effect on healing of through-and-through defects.

CONCLUSION

Endodontic microsurgery results in high success rate in large periapical lesions with through-and-through communication with more than 80% reduction in volume of lesion and size of both buccal and palatal window after 1 year. A mixture of type-1 collagen particles and i-PRF, adjunct to periapical micro-surgery did not improve the healing in through-and-through periapical defects.

Clinical and radiological outcomes of dynamic navigation in endodontic microsurgery: a prospective study

OBJECTIVES

This study was aimed at evaluating the clinical and radiological outcomes of novel dynamic navigation (DN)-aided endodontic microsurgery (EMS), with an analysis of potential prognostic factors.

MATERIALS AND METHODS

Forty-six teeth from 32 patients who received DN-aided EMS were included. Clinical and radiographic assessments were performed at least 1 year postoperatively. Two calibrated endodontists assessed radiological outcomes according to two-dimensional (2D) periapical radiography (PA) and three-dimensional (3D) cone-beam computed tomography (CBCT) imaging using Rud's and Molven's criteria and modified PENN 3D criteria, respectively. Fisher's exact test was used for statistical analysis of the predisposing factors.

RESULTS

Of the 32 patients with 46 treated teeth, 28 with 40 teeth were available for follow-up. Of the 28 patients, four (five teeth) refused to undergo CBCT and only underwent clinical and PA examinations, and the remaining 24 (35 teeth) underwent clinical, PA, and CBCT examinations. Combined clinical and radiographic data revealed a 95% (38/40) success rate in 2D healing evaluations and a 94.3% (33/35) success rate in 3D healing evaluations. No significant effect was found in sex, age, tooth type, arch type, preoperative lesion volume, preoperative maximum lesion size, presence/absence of crown and post, and the root canal filling state on the outcome of DN-aided EMS.

CONCLUSIONS

DN-aided EMS has a favorable prognosis and could be considered an effective and reliable treatment strategy. Further investigations with larger sample sizes are required to confirm these results.

CLINICAL RELEVANCE

DN-aided EMS could be considered an effective and reliable treatment strategy.

CBCT in contemporary endodontics

Cone-beam computed tomography (CBCT) is a three-dimensional imaging modality which can aid endodontic diagnosis and treatment planning. While there are guidelines available describing the indications, there are divergent philosophies on when this technology should be applied in clinical practice. This paper reviews the applications of CBCT including the clinical relevance of parameters which can be assessed, highlights the limitations of this technology, and provides guidance on how to maximise its clinical utility.

Clinical Effect Evaluation of Concentrated Growth Factor in Endodontic Microsurgery: A Cross-Sectional Study

INTRODUCTION

Concentrated growth factor (CGF) is the third-generation platelet concentrate product. This study aimed to evaluate whether the use of CGF during endodontic microsurgery had a positive influence on surgical outcomes.

METHODS

Fifty-four patients who underwent endodontic microsurgery from January 2017 to November 2021 were enrolled. They were assigned to the CGF and the control group according to whether CGF was used during the surgery and followed up at 6, 12, and 18 months post-surgery. Preoperative classification of the cases and follow-up radiographic outcomes were based on Kim's classification and Molven's criteria respectively and evaluated by two calibrated endodontists. Student t-test and Chi-square test were used to assess the baseline of two groups. Rank sum test was used to determine whether CGF had an impact on the surgical outcome.

RESULTS

Thirty-one patients (41 periapical lesion sites) were included in the CGF group, and twenty-three patients (26 periapical lesion sites) were included in the control group. The overall success rate of endodontic microsurgery was above 90%. The baseline of the two groups had no difference (P<0.05). In the CGF group, the success rate was always 100% in three follow-ups, while the success rate was 84.2%, 92.8%, and 90% respectively in the control group. The success rate between the CGF group and the control group was statistically significant in all three follow-up points (P<0.05).

CONCLUSIONS

The application of CGF during endodontic microsurgery might have a positive influence on surgical outcomes, thus, its prognosis. However, higher-grade evidence is needed to demonstrate its role.

Factors that influence the outcomes of surgical endodontic treatment

Surgical endodontic treatment encompasses a broad spectrum of procedures, amongst which root-end cavity preparation and filling, retrograde root canal treatment and through-and-through endodontic surgery, may be classified under the umbrella term 'Root-end surgery'. This narrative review considers the available data on periapical healing, soft tissue healing, tooth survival and oral health-related quality of life (OHRQoL), following root-end surgery and the factors that affect its outcomes. The pooled periapical healed rate for the studies published up to 2021 was 69% (95% CI: 65%, 73%) but increased to 76% (95% CI: 66%, 86%) when only data from the 2020's studies were analysed. The prognostic factors consistently reported for periapical healing have included: pre-operative periapical lesion with complete loss of buccal plate, quality of root-end preparation, remaining thickness of apical root dentine and restorative status. Soft tissue healing of the reflected flap was found to have a positive association with periapical healing. The survival rates following root-end surgery range from 48% to 93%, with failure of periapical healing associated with root and crown fracture, being the predominant reasons for tooth extraction. The factors influencing impact of root-end surgery on patients' quality of life could not be adequately evaluated due to design flaws in the available studies. In conclusion, if root canal treatment failure due to leakage through cracks, fractures or restoration margin are excluded, the remaining cases may represent localized residual infection and inflammation at the periapex that should be amenable to predictable management with the aid of modern root-end surgery.

In vitro evaluation of the sealing ability of combined use of iRoot BP Plus and iRoot SP for root-end filling

OBJECTIVES

The aim of this in vitro study was to evaluate the sealing ability of combined application of iRoot BP Plus Root Repair Material (BP-RRM) and iRoot SP Injectable Root Canal Sealer (SP-RCS) for root-end filling.

MATERIAL AND METHODS

A total of 120 extracted human teeth were used in this study and were randomly divided into four groups. The BP-RRM+SP-RCS group included teeth retro-filled with combined use of BP-RRM and SP-RCS (n=45), and the BP-RRM group included teeth retro-filled by BP-RRM alone (n=45). Teeth without root-end preparation and filling were equally divided into positive control (n=15) and negative control (n=15). The apical sealing ability was evaluated by micro-CT analysis, dye penetrant examination, bacterial leakage test, and glucose leakage test.

RESULTS

Micro-CT analysis showed that the total void fraction of BP-RRM+SP-RCS group was significantly lower than that of BP-RRM group, particularly at the coronal 1/3 segment of the retro-filled roots. Consistently, the maximum linear depth of dye leakage in BP-RRM+SP-RCS group was less than that of BP-RRM group. Bacterial leakage test showed that the microbial leakage in BP-RRM+SP-RCS group was significantly less than that in BP-RRM group. However, no significant difference in glucose leakage between BP-RRM+SP-RCS group and BP-RRM group was observed.

CONCLUSION

Combined use of BP-RRM and SP-RCS for root-end filling promotes apical sealing in vitro.

CLINICAL RELEVANCE

Combined use of BP-RRM and SP-RCS for root-end filling exhibited better apical sealing as compared to BP-RRM alone in vitro, and this may help reducing technical sensitivity and promoting clinical efficiency during endodontic microsurgery.

Prognostic Factors of Combined Periodontal and Endodontic Lesions: A Retrospective Study

Objective. This study used a retrospective method to explore the relevant factors affecting the prognosis of periodontal-endodontic combined lesions. Methods. According to the changes of subjective feelings and clinical indicators of affected teeth, selected patients were divided into an effective group and an ineffective group. The natural conditions (age, gender, and smoking status) of the patients and various clinical indicators at the initial and follow-up visits were collected, including the periodontal clinical indicators of the whole mouth and the clinical indicators of the affected teeth. The full-mouth periodontal clinical indicators include periodontal probing depth (PD), clinical attachment loss (CAL), sulcus bleeding index (SBI), and simplified oral hygiene index (OHI.S); clinical indicators of affected teeth include PD, CAL, SBI, mobility (TM), clinical crown-to-root ratio (CR), periapical index (PAI), and number of root canals. Results. There were 74 cases of endodontic combined treatment, with a total of 86 teeth. There was no significant difference in age and gender ratio between the effective group and the ineffective group, and the proportion of smoking patients in the ineffective group was significantly higher than that in the effective group $\left(P<0.05\right)$ . At the initial diagnosis, there was no significant difference in the clinical indicators of the whole mouth between the effective group and the ineffective group. After a combined endodontic treatment, the clinical indicators of the two groups were significantly improved $\left(P<0.01\right)$ . There was no significant difference in other periodontal clinical indicators between the two groups. Conclusion. The prognosis of nonsurgical treatment of periodontal and periodontal combined lesions is mainly correlated to the patient’s oral hygiene maintenance, as well as the loss of attachment, the degree of loosening, the clinical crown-to-root ratio, the periapical index, and the number of root canals.

Factors Affecting the Success of Endodontic Microsurgery: A Cone-Beam Computed Tomography Study

The purpose of this retrospective study was to verify preoperative local parameters of periapical lesions evaluated on cone-beam computed tomography (CBCT) scans as a potential prognostic factor in endodontic microsurgery (EMS). Among 89 cases, local factors (dimensions of lesion, bone destruction pattern, presence/absence of cortical bone destruction, height of buccal bone plate, apical extend of root canal filling, presence/absence of communication with anatomical cavities, type of lesion restriction) were measured on preoperative CBCT images before EMS. At least one year after surgery, the outcome of EMS was classified as a success or a failure. Ten cases (11.24%) were classified as a failure and 79 as a success (88.76%). Symptomatic lesions (OR = 0.088 (95% CI 0.011-0.731); p = 0.024), apicomarginal lesions (OR = 0.092 (0.021-0.402); p = 0.001) and an association with molar teeth (OR = 0.153 (0.032-0.732); p = 0.019) were found as negative predictive factors in the univariate analysis, whereas large apicocoronal dimension (OR = 0.664 (0.477-0.926); p = 0.016), apicomarginal lesions (OR = 0.058 (0.006-0.55); p = 0.013), and an association with molar teeth (OR = 0.047 (0.003-0.869); p = 0.04) were identified as negative predictive factors in the multivariate analysis model. Symptomatic lesions, apicomarginal lesions, lesions associated with molar teeth and large apicocoronal dimensions are significantly associated with the failure of EMS.

A retrospective cohort study on outcome and interactions among prognostic factors of endodontic microsurgery

BACKGROUND/PURPOSE

Endodontic microsurgery (EMS) is a reliable treatment for teeth with non-healing apical periodontitis. This study evaluated the outcome of EMS with mineral trioxide aggregate as the retrograde filling material and identified potential prognostic factors associated with the EMS outcome.

METHODS

Consecutive clinical and radiographic records of EMS performed in a teaching hospital from 2013 to 2017 were reviewed. Cases of root fracture, cemental tear, re-surgery, and incomplete records were excluded. After selection, 268 EMS-treated teeth with the follow-up period more than one year were included. Surgical outcome as success or failure was evaluated according to Molven's criteria. For analysis of potential prognostic factors, multivariate logistic regression was performed followed by bivariate chi-square tests. Stratified analysis was performed to understand the interactions between two prognostic factors.

RESULTS

The overall EMS success rate was 89.9% in this study. Tooth type (anteriors vs. molars, odds ratio (OR) = 6.83, P = 0.001, anteriors vs. premolars, OR = 4.27, P = 0.010) and endodontic-periodontal (endo-perio) communicating defects (with vs. without, OR = 4.92, P = 0.005) both had a significant influence on the EMS outcome. The negative impact of endo-perio communicating defects was closely associated with tooth type. Premolars with endo-perio communicating defects had significantly higher rates of failure.

CONCLUSION

The EMS outcome is significantly affected by the tooth type and endo-perio communicating defect. The presence of endo-perio communicating defects has a greater negative influence on the success rate for premolars than for anteriors and molars.

Prognostic Predictors of Endodontic Microsurgery: Radiographic Assessment

Objective

This study aimed to compare the healing outcomes of endodontic microsurgery (EMS) using 2-dimensional (2D) and 3-dimensional (3D) radiographic evaluation in a Chinese population. The prognostic factors of EMS were identified according to the 2D and 3D healing classifications.

Materials and methods

The teeth (n = 82) were studied using 2D and 3D radiographic examinations. The 2D and 3D healing criteria were used to evaluate the healing outcome. Prognostic factors were investigated based on healing outcomes. Data were analysed using SPSS, and P < .05 was considered significant.

Results

There were significant differences between 2D and 3D healing outcomes (P = .004). For the 3D images, age older than 45 years was found to be a significant negative predictor (P = .005).

Conclusions

Cone-beam computed tomographic images provided more precise evaluation of periapical lesions and healing outcomes of EMS than conventional periapical radiographs. Age (>45 years) of the patients exhibited a significant influence on the healing outcome of EMS as determined using 3D images.

Machine learning models for prognosis prediction in endodontic microsurgery

OBJECTIVES

This study aimed to establish and validate machine learning models for prognosis prediction in endodontic microsurgery, avoiding treatment failure and supporting clinical decision-making.

METHODS

A total of 234 teeth from 178 patients were included in this study. We developed gradient boosting machine (GBM) and random forest (RF) models. For each model, 80% of the data were randomly selected for the training set and the remaining 20% were used as the test set. A stratified 5-fold cross-validation approach was used in model training and testing. Correlation analysis and importance ranking were conducted for feature selection. The predictive accuracy, sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), F1 score, and the area under the curve (AUC) of receiver operating characteristic (ROC) curves were calculated to evaluate the predictive performance.

RESULTS

There were eight important predictors, including tooth type, lesion size, type of bone defect, root filling density, root filling length, apical extension of post, age, and sex. For the GBM model, the predictive accuracy was 0.80, with a sensitivity of 0.92, specificity of 0.71, PPV of 0.71, NPV of 0.92, F1 of 0.80/0.80, and AUC of 0.88. For the RF model, the accuracy was 0.80, with a sensitivity of 0.85, specificity of 0.76, PPV of 0.73, NPV of 0.87, F1 of 0.79/0.81, and AUC of 0.83.

CONCLUSIONS

The trained models were developed by eight common variables, showing the potential ability to predict the prognosis of endodontic microsurgery. The GBM model outperformed the RF model slightly on our dataset.

CLINICAL SIGNIFICANCE

Clinicians can use machine learning models for preoperative analysis in endodontic microsurgery. The models are expected to improve the efficiency of clinical decision-making and assist in clinician-patient communication.

Impact of Periodontal Attachment Loss on the Outcome of Endodontic Microsurgery: A Systematic Review and Meta-Analysis

Background and Objectives: Endodontic microsurgery (EMS) aims to eradicate the sources of infection once the apical root resection removes most of the infected anatomical structures and repairs potential procedural errors in the apical region. An endodontic-periodontal lesion yields a pathological communication between the pulp and the periodontium. The purpose of this systematic review and meta-analysis is to evaluate the impact of periodontal attachment loss on the outcome of teeth submitted to EMS. Materials and Methods: PRISMA guidelines were followed. An electronic search was performed in EBSCOhost, Embase and PubMed databases with the following search key: (“endodontic microsurgery” AND “outcome”). No filters were used concerning the year of publication or language. Only randomized clinical trials, prospective and retrospective clinical studies in humans, with a minimum one-year follow-up, defined clinical and radiographic outcome criteria and estimable success rate for endodontic-periodontal lesion were included. Statistical analysis was performed using OpenMeta[Analyst] software. Results: Of a total of 113 articles, 34 were selected for full-text reading after duplicates deletion and title and abstract analysis. Thirteen and six studies were included in the systematic review and meta-analysis, respectively. A total of 2775 pooled teeth were submitted to EMS, of which 492 teeth and 4 roots had periodontal involvement. According to the qualitative analysis, success rates of the endodontic-periodontal group ranged from 67.6% to 88.2%. Meta-analysis revealed that the absence of periodontal attachment loss was predictive of a higher likelihood of success with an odds ratio of 3.14. Conclusions: Periodontal attachment loss presents a risk factor for EMS outcome. Although endodontic-periodontal lesions were associated with lower success rates considering a 1 to 10 years follow-up period, long-term successful prognosis following EMS has been reported, therefore presenting a fully valid and viable therapeutic option for the management of this type of lesions.

Accuracy and efficiency of guided root-end resection using a dynamic navigation system: a human cadaver study

AIM

To determine and compare the accuracy and efficiency of a dynamic navigation system (DNS) with a freehand (FH) technique when conducting root-end resection in a human cadaver model.

METHODOLOGY

Forty roots in cadaver heads were included and divided into two groups: DNS (n = 20) and FH (n = 20). Cone beam computed tomography (CBCT) scans of all teeth were taken. The drilling path and depth were planned virtually to using the X-guide software (X-Nav Technologies, Lansdale, PA, USA). Osteotomy and root-end resection were done under navigation in the DNS group, and freehand under the dental operating microscope in the FH group. Post-operative CBCTs were taken. Linear deviations, angular deflection, time of operation and number of mishaps were compared with determine the accuracy and efficiency. Shapiro-Wilk, one-way ANOVA and Fisher exact tests were used (P < 0.05).

RESULTS

Linear deviations, angular deflection and operation time were significantly less in the DNS group (P < 0.05). The number of mishaps was not different between the two groups (P > 0.05). Subgroup analyses revealed that the distance of >5 mm from buccal cortical plate was significantly associated with lower accuracy, increased operation time and greater incidence of mishaps in the FH group (P < 0.05), but not in the DNS group.

CONCLUSIONS

The dynamic navigation system was more accurate and more efficient in root-end resection in a cadaver model than the freehand technique. The distance of the roots from the buccal cortical plate had a significant negative impact on the accuracy and efficacy of the root-end resection procedure when using the freehand technique. The dynamic navigation system has the potential to be a safe and reliable technological addition to endodontic microsurgery.

Prognostic Factors after Endodontic Microsurgery: A Retrospective Study of 111 Cases with 5 to 9 Years of Follow-up

INTRODUCTION

A study was performed of the healing rate of teeth subjected to endodontic microsurgery after a minimum follow-up of 5 years with an analysis of the influence of different pre- and postoperative factors on the outcome.

METHODS

This was a retrospective study of patients subjected to endodontic microsurgery with the use of mineral trioxide aggregate (MTA) for retrograde filling between January 2011 and December 2015. In patients with multiple treated teeth, only 1 random tooth was selected for the statistical analysis. Clinical and radiographic parameters were used to assess healing. Simple binary logistic regression models were used to analyze the influence of patient age and sex, the type of tooth, prior radiographic lesion size, the presence of a post, the type of restoration, and the apical extent of prior filling of the root canal on the endodontic microsurgery success rate. Two calibrated observers evaluated the periapical radiographs on an independent basis.

RESULTS

A total of 111 patients (63.1% women and 36.9% men) were included in the study. Of the 111 teeth analyzed, 90 were classified as healed (mean healing rate = 81.1%). Patient age and sex, the presence of a post, the type of tooth, the type of restoration, and the apical extent of prior filling of the root canal had no significant impact on the outcome. Large lesions (>5 mm) were associated with a lower healing rate than smaller lesions, although the difference was not significant. Anterior teeth had a significantly higher healing rate (93.8% maxillary and 100% mandibular) than molars (70.8% maxillary and 57.1% mandibular) (P < .05). The differences between the anterior teeth and the molars were statistically significant.

CONCLUSIONS

The mean healing rate of teeth subjected to endodontic microsurgery was 81% after 5-9 years of follow-up. The success rate was lower for upper and lower molars than for teeth in the anterior zone, although the sample was small and further studies are needed to establish whether the type of tooth influences the treatment outcome.

The Buffalo study: Outcome and associated predictors in endodontic microsurgery- a cohort study

AIM

To (i) evaluate and compare the outcome of endodontic microsurgery (EMS) using periapical radiographs (PAs) and cone-beam computed tomography (CBCT) scans; (ii) identify prognostic factors affecting the outcome; and (iii) correlate the effect of guided tissue regeneration (GTR) on the pattern of apical bone remodelling.

METHODOLOGY

Eighty-two patients (101 teeth) who received EMS were included and followed-up using clinical and radiographic examinations (PAs and CBCT scans). Two calibrated endodontists evaluated the radiographic healing (favourable or unfavourable) by assessing PAs and CBCT. The success (favourable radiographic outcome with no clinical symptoms) and survival rates (tooth retention without clinical symptoms) were calculated, and the cause of failure (diseased or fractured) was identified. Pre-treatment (age, sex, tooth type, position, sequence of treatment, quality of root canal before surgery, presence/absence of through-and-through lesion, presence/absence apico-marginal defect) and treatment (presence/absence of errors during surgery, type of error (major or minor), retro-preparation depth, presence/absence of an isthmus, retro-filling material used, presence/absence bone graft material and/or resorbable membrane) factors were recorded. Data were analysed statistically to determine the inter-observer, intra-observer and inter-radiographic agreements. Univariate, bivariate and logistic regression analysis were used to determine prognostic factors affecting the outcome and the effect of GTR on the pattern of apical bone remodelling. The significance level was set at 5%.

RESULTS

Sixty-eight patients (83 teeth) presented for outcome evaluation (recall rate: 84%). The survival rate was 93%. The success rate was 88% using PA and 86% using CBCT when vertical root fracture (VRF) cases were included and 94% using PAs, and 91% using CBCT when VRF cases were excluded. The intra- and inter-observer agreements were substantial using CBCT, slight to a fair agreement using PA (P < 0.001), and slight to moderate for inter-radiographic agreement. The occurence of a major procedural error during surgery was the only negative predictor for the outcome of EMS (P = 0.013). GTR did not affect the success rate or the type of healing when assessed using PA but it affected the type of healing on CBCT scans (complete vs incomplete healing) and the pattern of cortical plate remodelling (P < 0.001).

CONCLUSION

The success and survival rate of endodontic microsurgery was very high, and the occurrence of a major procedural error during surgery was the only factor affecting the outcome. GTR did not improve the outcome, but did affect the quality of apical bone remodelling following EMS.

Preserving the Neurovascular Bundle in Targeted Endodontic Microsurgery: A Case Series

Endodontic microsurgery encompasses the use of microscopy, specialized instruments, and advanced imaging with cone-beam computed tomographic (CBCT) imaging. This treatment modality results in high clinical success rates and facilitates the enucleation of osteolytic lesions, the resection of apical root canal complexities harboring persistent bacterial biofilms, and the evaluation of possible root defects and fractures. However, there is the risk of injury to important anatomic structures, particularly when treating posterior teeth. Neurovascular bundles are among these structures at risk for injury. Fortunately, high-resolution CBCT scans can be used to detect these structures that are known to have a high anatomic variability. In addition, CBCT information can be combined with high-resolution intraoral scans to plan, design, and fabricate surgical guides to be used in a targeted endodontic microsurgery (TEMS) approach. We report 3 cases with previous endodontic treatment having persistent apical periodontitis that were treated with TEMS to avoid damage to the neurovascular bundles at risk of injury. In the first case, the palatal root of tooth #14 was adjacent to the greater palatine artery. In the second case, the mental nerve exited through 2 separate foramina close to the predictive osteotomy site for the mesial root of tooth #19. In the third case, the posterior superior alveolar artery was in close proximity to the mesiobuccal root of tooth #14. Collectively, these cases illustrate the diagnostic value of CBCT imaging for detecting neurovascular bundles and the use of TEMS to mitigate the risk of injury to these important structures. Thus, the combination of CBCT imaging and TEMS can potentially minimize the risk of intraoperative complications and postoperative sequelae while increasing the predictability of endodontic microsurgeries in complex cases.

Long-Term Prognosis of Endodontic Microsurgery-A Systematic Review and Meta-Analysis

Background and objectives: The long-term outcome of endodontic microsurgery (EMS) performed on root-filled teeth affected by post-treatment apical periodontitis (AP) has been a matter of debate, re-launched by the introduction of novel root-end filling materials which have been proven to improve the short-term outcome of EMS. The purpose of this systematic review and meta-analysis is to evaluate the clinical and radiographic long-term outcome of endodontic microsurgery in teeth diagnosed with secondary AP through radiographic evaluation. Materials and Methods: This systematic review and meta-analysis followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Inclusion and exclusion criteria were defined a priori to select the best longitudinal evidence. Only randomized clinical trials (RCT) and prospective clinical studies (PCS), with a follow-up ≥ 2-year, and exhibiting well-established clinical and radiographic outcome criteria, were selected. Results: A total of 573 articles were obtained, from which 10 fulfill inclusion criteria: 6 PCS and 4 RCT. Meta-analysis showed a pooled proportion of success rate of 91.3%, from an overall amount of 453 treated teeth included in RCT; from overall 839 included teeth in PCS, a pooled success rate of 78.4% was observed, with the follow-up time ranging from 2 to 13-years. Survival rate outcomes varied from 79 to 100% for the same follow-up period. Five prognostic factors with influence on the outcome were disclosed: smoking habits, tooth location and type, absence/presence of dentinal defects, interproximal bone level, and root-end filling material. Conclusions: High success rates and predictable results can be expected when EMS is performed by trained endodontists, allowing good prognosis and preservation of teeth affected by secondary AP.

Prognostic Factors of Long-Term Outcomes in Endodontic Microsurgery: A Retrospective Cohort Study over Five Years

The aim of this study was to analyze the long-term outcomes of endodontic microsurgeries in a cohort and identify their association with prognostic factors. A cohort of endodontic microsurgeries followed up periodically with complete clinical and radiographic records for at least 5 years were reviewed retrospectively. Their survival and healing status and profile characteristics were analyzed by Pearson chi-square test and logistic regression (α = 0.05) to identify prognostic factors that influenced outcomes. Of 652 cases in the cohort, 225 (34.5%) were included. The mean follow-up period was 90.4 months (range, 60–168 months). The long-term success rate was 80.5%, and the 5-year survival rate was 83.5%. Logistic regression showed higher success in anteriors compared to molars (OR = 5.405, (95% CI, 1.663–17.571; p = 0.005)) and in teeth with crown restorations (OR = 10.232, (95% CI, 3.374–31.024; p < 0.001)). Conversely, lower success was found in teeth with periodontal disease (OR = 0.170, (95% CI, 0.032–0.900; p = 0.037)) and maxillary sinus involvement (OR = 0.187, (95% CI, 0.035–0.994; p = 0.049)). Endodontic microsurgery has a highly favorable long-term outcome. Tooth position, crown restoration, periodontal disease, and maxillary sinus involvement were identified as main prognostic factors.

Root-end microsurgery using a premixed tricalcium silicate putty as root-end filling material: a prospective study

OBJECTIVES

The purpose of this study was to assess the clinical and radiographic outcome of root-end microsurgery using a premixed fast-set calcium silicate putty as root-end filling material in human teeth.

MATERIALS AND METHODS

This study included 50 teeth in 35 patients, whose ages ranged from 16 to 69 years. After clinical and radiographic examination, informed consent was obtained and one resident performed all surgical procedures using an endodontic microsurgical approach. A tricalcium silicate-based putty (TotalFil FS putty, FKG Dentair, La Chaux-de-Fonds, Switzerland) was used as a root-end filling material. Patients were recalled and treated teeth were examined clinically and radiographically at 3 months, 6 months, and 1 year postoperatively. The outcome was determined based on clinical and radiographic results. Radiographic healing was classified into 4 categories: complete, incomplete, uncertain, and unsatisfactory. Analysis of predictors was performed using the Pearson chi-square or Fisher's exact test.

RESULTS

At the time of surgery, 3 teeth were diagnosed with cracks and were excluded from the study. The recall rates were 85% at 3 months, 100% at 6 months, and 95% at 1 year. One tooth failed at 3 months, 3 failed at 1 year, with a success rate of 93%. None of the predictors investigated had a significant influence on the outcome of microsurgery.

CONCLUSIONS

Premixed fast-set tricalcium silicate putty is a suitable root-end filling material for use in endodontic microsurgery.

CLINICAL RELEVANCE

Tricalcium silicate-based cements have shown promising biological properties as a root-end-filling material. Premixed and fast-set formulations achieved high success rates in clinical studies.

TRIAL REGISTRATION

Clinicaltrials.gov registration number NCT03733938.

The application of "bone window technique" using piezoelectric saws and a CAD/CAM-guided surgical stent in endodontic microsurgery on a mandibular molar case

Apical surgery for a mandibular molar is still challenging for many reasons. This report describes the applications of computer-guided cortical ‘bone-window technique’ using piezoelectric saws that prevented any nerve damage in performing endodontic microsurgery of a mandibular molar. A 49-year-old woman presented with gumboil on tooth #36 (previously endodontically treated tooth) and was diagnosed with chronic apical abscess. Periapical lesions were confirmed using cone-beam computed tomography (CBCT). Endodontic microsurgery for the mesial and distal roots of tooth #36 was planned. Following the transfer of data of the CBCT images and the scanned cast to an implant surgical planning program, data from both devices were merged. A surgical stent was designed, on the superimposed three-dimensional model, to guide the preparation of a cortical window on the buccal side of tooth #36. Endodontic microsurgery was performed with a printed surgical template. Minimal osteotomy was required and preservation of the buccal cortical plate rendered this endodontic surgery less traumatic. No postoperative complications such as mental nerve damage were reported. Window technique guided by a computer-aided design/computer-aided manufacture based surgical template can be considerably useful in endodontic microsurgery in complicated cases.

3D Apicoectomy Guidance: Optimizing Access for Apicoectomies

When conventional endodontic treatment resources are depleted, endodontic surgery becomes an alternative treatment for apical periodontitis to remove unreachable infected areas and seal the root canal. Digital workflows have been used more frequently in many dental applications in recent years. In endodontics, virtual 3-dimensional (3D) planning and endodontic guidance are new aspects important for the treatment of complex cases. This report aimed to present 3D Apicoectomy Guidance, a novel method of performing guided ultraconservative endodontic surgery with conventional implant-guided drills, and to describe its application in a case with a complex anatomic scenario and intimate contact with the maxillary sinus. Implantology computer software, as well as cone-beam computed tomography images and a digital scanning 3D impression, enabled virtual planning of the surgical procedure. Subsequently, a 3D template was produced to guide the instruments used in the osteotomy and root resection. The patient was completely asymptomatic at the 1-week follow-up visit. Cone-beam computed tomography scans were performed at 1 and 6 months after surgery and showed that resection of the apex of the root was performed accurately and that a thin dentin slice remained distally, preventing the rupture of the sinus membrane. The patient remained asymptomatic, and the tissue healed normally. The method used was shown to be very straightforward and reliable. This method allowed the patient to be treated expeditiously with very precise tissue removal.

Effects of fast- and slow-setting calcium silicate-based root-end filling materials on the outcome of endodontic microsurgery: a retrospective study up to 6 years

OBJECTIVES

The purpose of this retrospective study was to evaluate and compare the effects of fast- and slow-setting calcium silicate-based materials (CSMs) used for root-end filling on the outcome of endodontic microsurgery.

MATERIALS AND METHODS

We searched a clinical database for patients who had received endodontic microsurgery between 2001 and 2016. Included cases were divided into two groups according to the type of CSM used for root-end filling: slow-setting CSM (SCSM) and fast-setting CSM (FCSM). The cases in two groups were subjected to 1:1 nearest neighbor propensity score matching for the following variables: age, sex, tooth type, quality of canal filling, lesion type, and postoperative restoration. For each matched case, the outcome was determined as success or failure according to clinical and radiographic evaluations performed at least 1 year after surgery. Multivariate logistic regression analysis was performed to identify prognostic factors and estimate their effects.

RESULTS

In total, 304 cases of endodontic microsurgery (179 SCSM and 125 FCSM) were identified, and 1:1 propensity score matching finally included 122 cases from each group. After matching, all covariates were associated with an absolute standardized difference of < 0.1. The overall success rates were 85.2% and 93.4% for the SCSM and FCSM groups, respectively (p = 0.062). Age, tooth type, lesion type, and CSM type were significantly associated with the outcome of endodontic microsurgery (p < 0.05).

CONCLUSIONS

Within the limitations, the outcome of endodontic microsurgery using FCSMs was comparable with that of SCSMs. The findings suggest that the type of CSM used for root-end filling, particularly in terms of the initial setting time, could affect the outcome of endodontic microsurgery.

CLINICAL RELEVANCE

FCSMs could be considered for use as root-end filling materials in endodontic microsurgery, particularly in complicated clinical situations which require rapid initial setting of the materials.

Outcome of Endodontic Surgery: A Meta-analysis of the Literature-Part 3: Comparison of Endodontic Microsurgical Techniques with 2 Different Root-end Filling Materials

INTRODUCTION

The aim of the present study was to investigate the influence of root-end preparation and filling material on endodontic surgery outcome. A systematic review and meta-analysis was conducted to determine the outcome of resin-based endodontic surgery (RES, the use of high-magnification preparation of a shallow and concave root-end cavity and bonded resin-based root-end filling material) versus endodontic microsurgery (EMS, the use of high-magnification ultrasonic root-end preparation and root-end filling with SuperEBA [Keystone Industries, Gibbstown, NJ], IRM [Dentsply Sirona, York, PA], mineral trioxide aggregate [MTA], or other calcium silicate cements).

METHODS

An exhaustive literature search was conducted to identify prognostic studies on the outcome of root-end surgery. Human studies conducted from 1966 to the end of December 2016 in 5 different languages (ie, English, French, German, Italian, and Spanish) were searched in 4 electronic databases (ie, Medline, Embase, PubMed, and Cochrane Library). Relevant review articles on the subject were scrutinized for cross-references. In addition, 5 dental and medical journals (Journal of Endodontics; International Endodontic Journal; Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontics; Journal of Oral and Maxillofacial Surgery; and International Journal of Oral and Maxillofacial Surgery) were hand checked dating back to 1975. All abstracts were screened by 3 independent reviewers (H.B., M.K., and F.S.). Strict inclusion-exclusion criteria were defined to identify relevant articles. Raw data were extracted from the full-text review of these selected articles independently by each of the 3 reviewers. In case of disagreement, an agreement was reached by discussion, and qualifying articles were assigned to group RES. For EMS, the same search strategy was performed for the time frame October 2009 to December 2016, whereas up to October 2009 the data were obtained from a previous systematic review with identical criteria and search strategy. Weighted pooled success rates and a relative risk assessment between RES and EMS were calculated. To make a comparison between groups, a random effects model was used.

RESULTS

Sixty-eight articles were eligible for full-text review. Of these, per strict inclusion exclusion criteria, 14 studies qualified, 3 for RES (n = 862) and 11 for EMS (n = 915). Weighted pooled success rates for RES were 82.20% (95% confidence interval [CI], 0.7965-0.8476) and 94.42% for EMS (95% CI, 0.9295-0.9590). This difference was statistically significant (P < .0005).

CONCLUSIONS

The probability for success for EMS proved to be significantly greater than the probability for success for RES, providing best available evidence on the influence of cavity preparation with ultrasonic tips and/or SuperEBA (Keystone Industries, Gibbstown, NJ), IRM (Dentsply Sirona, York, PA), MTA, or silicate cements as root-end filling material instead of a shallow cavity preparation and placement of a resin-based material. Additional large-scale randomized clinical trials are needed to assess other predictors of outcome.

Clinical and Radiographic Outcomes of Apical Surgery: A Clinical Study

Background

Endodontic treatment is usually indicated when teeth with periapical lesions are encountered. However, sometimes root canal treatment results in failure. In that case, one of the treatment choices is retreatment by an orthograde approach. Surgical endodontic therapy is also an alternative to preserve the tooth. Various techniques have been suggested in the literature which has more predictable results. The introduction of modern surgical techniques have enhanced the results of apical surgery procedures. Operating microscopes, magnifying loupes, microinstruments, ultrasonic tips, and biologically acceptable root-end filling materials (such as MTA and SuperEBA) have been introduced to this field with the modern technique, thus the success rates of modern apical surgery has increased significantly.

Objective

The aim of the present study was to evaluate the clinical and radiographic outcomes and periotest values of apical surgery treatment.

Methods

A total of 112 teeth were included. SuperEBA and MTA were used as root-filling materials. The recorded parameters were gender, age, location of the tooth, the presence/absence of a post, coronal restoration of the tooth, previous surgical/nonsurgical treatment of the tooth, the size of periapical lesions, histopathology of periapical lesions, smoking habits. Also the periotest values were recorded.

Results

The overall success rate was 88.4%. With regard to the evaluated variables, only one parameter (tooth type) was found statistically significant. Although the periotest values were decreased after 6 months compared to immediately postoperative measurements, the values were still significantly higher than preoperative measurements.

Conclusion

In this study, apical surgery performed with the modern instruments has significantly successful results with 88.4% success rate.

Comparison of the effect of endodontic-periodontal combined lesion on the outcome of endodontic microsurgery with that of isolated endodontic lesion: survival analysis using propensity score analysis

OBJECTIVES

The purpose of this retrospective clinical study was to evaluate the effect of lesion types related to endodontic microsurgery on the clinical outcome.

MATERIALS AND METHODS

Patients who underwent endodontic microsurgery between March 2001 and March 2014 with a postoperative follow-up period of at least 1 year were included in the study. Survival analyses were conducted to compare the clinical outcomes between isolated endodontic lesion group (endo group) and endodontic-periodontal combined lesion group (endo-perio group) and to evaluate other clinical variables. To reduce the effect of selection bias in this study, the estimated propensity scores were used to match the cases of the endo group with those of the endo-perio group.

RESULTS

Among the 414 eligible cases, the 83 cases in the endo-perio group were matched to 166 out of the 331 cases in the endo group based on propensity score matching (PSM). The cumulated success rates of the endo and endo-perio groups were 87.3 and 72.3%, respectively. The median success period of the endo-perio group was 12 years (95% CI: 5.507, 18.498). Lesion type was found to be significant according to both Log-rank test (P = 0.002) and Cox proportional hazard regression analysis (P = 0.001). Among the other clinical variables, sex (female or male), age, and tooth type (anterior, premolar, or molar) were determined to be significant in Cox regression analysis (P < 0.05).

CONCLUSION

Endodontic-periodontal combined lesions had a negative effect on the clinical outcome based on an analysis that utilized PSM, a useful statistical matching method for observational studies.

CLINICAL RELEVANCE

Lesion type is a significant predictor of the outcome of endodontic microsurgery.

Mineral trioxide aggregate and other bioactive endodontic cements: an updated overview - part II: other clinical applications and complications

Mineral trioxide aggregate (MTA) is a dental material used extensively for vital pulp therapies (VPT), protecting scaffolds during regenerative endodontic procedures, apical barriers in teeth with necrotic pulps and open apices, perforation repairs as well as root canal filling and root-end filling during surgical endodontics. A number of bioactive endodontic cements (BECs) have recently been introduced to the market. Most of these materials have calcium and silicate in their compositions; however, bioactivity is a common property of these cements. These materials include the following: BioAggregate, Biodentine, BioRoot RCS, calcium-enriched mixture cement, Endo-CPM, Endocem, EndoSequence, EndoBinder, EndoSeal MTA, iRoot, MicroMega MTA, MTA Bio, MTA Fillapex, MTA Plus, Neo MTA Plus, Ortho MTA, Quick-Set, Retro MTA, Tech Biosealer, and TheraCal LC. It has been claimed that these materials have properties similar to those of MTA but without the drawbacks. In Part I of this review, the available information on the chemical composition of the materials listed above was reviewed and their applications for VPT was discussed. In this article, the clinical applications of MTA and other BECs will be reviewed for apexification, regenerative endodontics, perforation repair, root canal filling, root-end filling, restorative procedures, periodontal defects and treatment of vertical and horizontal root fractures. In addition, the literature regarding the possible drawbacks of these materials following their clinical applications is reviewed. These drawbacks include their discolouration potential, systemic effects and retreatability following use as a root filling material. Based on selected keywords, all publications were searched regarding the use of MTA as well as BECs for the relevant clinical applications. Numerous publications were found regarding the use of BECs for various endodontic applications. The majority of these investigations compared BECs with MTA. Despite promising results for some materials, the number of publications using BECs for various clinical applications was limited. Furthermore, most studies had several methodological shortcomings and low levels of evidence.