Current trends in mesenchymal stem cell application in bone augmentation: a review of the literature

Nonvascularized bone grafts: how successful are they in reconstruction of segmental mandibular defects?

OBJECTIVE

Segmental mandibular defects can occur due to various etiologies, including trauma and tumor resection. Reconstruction should provide adequate support for subsequent dental rehabilitation and allow for proper occlusion. Nonvascularized bone grafts have been used for reconstructing mandibular defects in cases where vascularized grafts were not feasible. The objective of this study was to assess the success rate of these grafts in reconstruction of segmental defects of various sizes in the mandible.

STUDY DESIGN

Fifty patients were included in this retrospective chart review. Length of the grafts varied from 3 to 20 cm and patients were followed up from 4 to 80 months. Fifteen grafts were harvested from anterior iliac crest, 23 from posterior iliac crest, 9 grafts were a combination of either with costochondral graft, and 3 were solely allografts. Bone morphogenetic protein was utilized in 41 cases as an adjunct.

RESULTS

Success was defined as continuity of bone clinically and radiographically at a 4-month follow-up. Nonvascularized bone grafting was successful in 90% of cases. Complications were observed in 34% of cases, of which the most common were infection followed by wound dehiscence.

CONCLUSIONS

Our study demonstrated substantial success rate with nonvascularized bone grafts in reconstruction of segmental mandibular defects.

Addition of Bone-Marrow Mesenchymal Stem Cells to 3D-Printed Alginate/Gelatin Hydrogel Containing Freeze-Dried Bone Nanoparticles Accelerates Regeneration of Critical Size Bone Defects

A 3D-printed biodegradable hydrogel, consisting of alginate, gelatin, and freeze-dried bone allograft nanoparticles (npFDBA), is developed as a scaffold for enhancing cell adhesion, proliferation, and osteogenic differentiation when combined with rat bone marrow mesenchymal stem cells (rBMSCs). This composite hydrogel is intended for the regeneration of critical-sized bone defects using a rat calvaria defect model. The behavior of rBMSCs seeded onto the scaffold is evaluated through scanning electron microscope, MTT assays, and quantitative real-time PCR. In a randomized study, thirty rats are assigned to five treatment groups: 1) rBMSCs-loaded hydrogel, 2) rBMSCs-loaded FDBA microparticles, 3) hydrogel alone, 4) FDBA alone, and 5) an empty defect serving as a negative control. After 8 weeks, bone regeneration is assessed using H&E, Masson's trichrome staining, and immunohistochemistry. The 3D-printed hydrogel displays excellent adhesion, proliferation, and differentiation of rBMSCs. The rBMSCs-loaded hydrogel exhibits comparable new bone regeneration to the rBMSCs-loaded FDBA group, outperforming other groups with statistical significance (P-value < 0.05). These findings are corroborated by Masson's trichrome staining and osteocalcin expression. The rBMSCs-loaded 3D-printed hydrogel demonstrates promising potential for significantly enhancing bone regeneration, surpassing the conventional clinical approach (FDBA).

Buccal Mesenchymal Stromal Cells as a Source of Osseointegration of Titanium Implants

We studied the interaction of human buccal mesenchymal stem cells (MSCs) and osteoblasts differentiated from them with the surface of titanium samples. MSCs were isolated by enzymatic method from buccal fat pads. The obtained cell culture was presented by MSCs, which was confirmed by flow cytometry and differentiation into adipocytes and osteoblasts. Culturing of buccal MSCs on titanium samples was accompanied by an increase in the number of cells for 15 days and the formation of a developed network of F-actin fibers in the cells. The viability of buccal MSCs decreased by 8 days, but was restored by 15 days. Culturing of osteoblasts obtained as a result of buccal MSC differentiation on the surface of titanium samples was accompanied by a decrease in their viability and proliferation. Thus, MSCs from buccal fat pads can be used to coat implants to improve osseointegration during bone reconstruction in craniofacial surgery and dentistry. To improve the integration of osteoblasts, modification of the surface of titanium samples is required.

Polyurethane and polyurethane/hydroxyapatite scaffold in a three-dimensional culture system

Designing a new scaffold with an optimal ability of osteogenesis differentiation is a significant step bone tissue engineering along with the growing demands for bone craft in recent decades. Herein, we used Polyurethane (PU), a novel biocompatible and flexible polymer, and Hydroxyapatite (HA), the major component of human hard tissues matrix for developing new scaffolds and analyzing the in vitro osteogenic differentiation potential of human adipose-derived mesenchymal stem cells (Ad-MSCs) in basal and induction media. Gene expression analysis was performed to evaluate the expression level of four osteogenic differentiation genes. MTT assays were also done to assess the attachment and proliferation of the cells after 7 and 21 days of seeding to scaffolds. The expression level of RUNX2 was increased in seeded cells on PU/HA scaffolds compared with the PU. Cellular adhesion and proliferation of the Ad-MSCs were higher in PU/HA than PU scaffolds according to the histology analysis. The PU and PU/HA scaffolds supported the attachment, proliferation, and differentiation of Ad-MSCs, and they are suitable candidates for producing constructs in bone regeneration. However, further in-vitro and in-vivo studies on these scaffolds are needed to introduce an appropriate candidate for clinical bone regeneration.

Comparison of rhBMP-2 in Combination with Different Biomaterials for Regeneration in Rat Calvaria Critical-Size Defects

Regeneration of critical bone defects requires the use of biomaterials. The incorporation of osteoinductive agents, such as bone morphogenetic proteins (BMPs), improves bone formation. This study aimed to compare the efficacy of rhBMP-2 in combination with different materials for bone regeneration in critical-sized rat calvarial defects. This was an experimental animal study using 30 rats. In each rat, two 5-mm critical-size defects were made in the calvaria (60 bone defects in total) using a trephine. All rats were randomized to one of the six groups: control (C), autograft + rhBMP-2 (A), absorbable collagen sponge + rhBMP-2 (ACS), β-tricalcium phosphate + rhBMP-2 (B-TCP), bovine xenograft + rhBMP-2 (B), and hydroxyapatite + rhBMP-2 (HA). The outcome was assessed after 4 and 8 weeks using histological description and the histological bone healing scale. Statistical analysis was performed using the Kruskal-Wallis and Mann–Whitney U tests, with a p-value set at 0.05. The average bone healing scores per group were as follows: C group, 12.5; A group, 26.5; ACS group, 18.8; B-TCP group, 26.2; HA group, 20.9; and B group, 20.9. The C group showed a significant difference between weeks 4 and 8 (p = 0.032). Among the 4-week groups, the C group showed a significant difference compared to A (p = 0.001), ACS (p = 0.017), and B-TCP (p = 0.005) groups. The 8-week experimental group did not show any significant differences between the groups. The 5-mm critical size defect in rat calvaria requires the use of bone biomaterials to heal at 4 and 8 weeks. rhBMP-2, as applied in this study, showed no difference in new bone formation when combined with bovine, B-TCP, or HA biomaterials.

Design of novel functionalized collagen-chitosan-MBG scaffolds for enhancing osteoblast differentiation in BMSCs

Collagen and chitosan are two different kinds of natural biodegradable polymers commonly used in the regeneration of bone defects. Mesoporous bioactive glass (MBG) is a type of favorable bone filler which can effectively constitute an enlarged microenvironment to facilitate an exchange of important factors between the cells and scaffolds. Here we prepared a collagen-chitosan-MBG (C-C-MBG) scaffold which displayed significantly increased proliferation, differentiation and mineralization in bone mesenchymal stem cells (BMSCs). Additionally, we found that the scaffold can stimulate extra-cellular signal regulated kinase 1/2 (Erk1/2) activated Runx2 pathway, which is the predominant signaling pathway involved in osteoblast differentiation. Consistently, we observed that the scaffold can markedly enhance the expression ofType I collagen, Osteopontin(Opn), andRunx2, which are important osteoblastic marker genes implicated in the process of osteoblast differentiation. Therefore, we conclude that the composite scaffold can significantly promote the differentiation of BMSCs into osteoblasts by activating Erk1/2-Runx2 pathway. Our finding thereby implies that the C-C-MBG scaffold can possibly act as a potential biomaterial in the bone regeneration.

Advances in Tissue Engineering and Implications for Oral and Maxillofacial Reconstruction

BACKGROUND

Reconstructive surgery in the oral and maxillofacial region poses many challenges due to the complexity of the facial skeleton and the presence of composite defects involving soft tissue, bone and nerve defects.

METHODS

Current methods of reconstruction include autologous grafting techniques with local or regional rotational flaps or microvascular free flaps, allografts, xenografts and prosthetic devices.

RESULTS

Tissue engineering therapies utilizing stem cells provide promise for enhancing the current reconstructive options.

CONCLUSIONS

This article is a review on tissue engineering strategies applicable to specialists who treat oral and maxillofacial defects.

PRACTICAL IMPLICATIONS

We review advancements in hard tissue regeneration for dental rehabilitation, soft tissue engineering, nerve regeneration and innovative strategies for reconstruction of major defects.

Fabrication techniques involved in developing the composite scaffolds PCL/HA nanoparticles for bone tissue engineering applications

A fine-tuned combination of scaffolds, biomolecules, and mesenchymal stem cells (MSCs) is used in tissue engineering to restore the function of injured bone tissue and overcome the complications associated with its regeneration. For two decades, biomaterials have attracted much interest in mimicking the native extracellular matrix of bone tissue. To this aim, several approaches based on biomaterials combined with MSCs have been amply investigated. Recently, hydroxyapatite (HA) nanoparticles have been incorporated with polycaprolactone (PCL) matrix as a suitable substitute for bone tissue engineering applications. This review article aims at providing a brief overview on PCL/HA composite scaffold fabrication techniques such as sol-gel, rapid prototyping, electro-spinning, particulate leaching, thermally induced phase separation, and freeze-drying, as suitable approaches for tailoring morphological, mechanical, and biodegradability properties of the scaffolds for bone tissues. Among these methods, the 3D plotting method shows improvements in pore architecture (pore size of ≥600 µm and porosity of 92%), mechanical properties (higher than 18.38 MPa), biodegradability, and good bioactivity in bone tissue regeneration.

Comparative analysis of plasma-derived albumin scaffold, alveolar osteoblasts and synthetic membrane in critical mandibular bone defects: An experimental study on rats

Repair of bone deficiencies in the craniofacial skeleton remains a challenging clinical problem. The aim of this study was to evaluate and compare the effects of a plasma-derived albumin scaffold, alveolar osteoblasts and synthetic membrane implanted into experimental mandibular defects. Bilateral mandibular defects were created in twelve immunodeficient rats. The bone defect was filled with serum scaffold alone in left sides and scaffold combined with human alveolar osteoblast in right side defects. Implanted areas were closed directly in Group 1 (n = 6) and covered by a resorbable polyglycolic-polylactic acid membrane in Group 2 (n = 6). Bone regeneration was determined at 12 weeks as measured by and exhaustive multiplanar computed tomography analysis and histological examination. No significant differences in bone density were observed between defects transplanted with scaffold alone or scaffold seeded with osteoblasts. The use of membrane did not result in a determining factor in the grade of bone regeneration between Groups 1 and 2. Based on these results, it could be concluded that the albumin scaffold alone has osteoinductive capacity but presence of seeded ostogenic cells accelerates defect repair without being significantly influenced by covering the defect with a resorbable membrane.

Selected Nanomaterials' Application Enhanced with the Use of Stem Cells in Acceleration of Alveolar Bone Regeneration during Augmentation Process

Regenerative properties are different in every human tissue. Nowadays, with the increasing popularity of dental implants, bone regenerative procedures called augmentations are sometimes crucial in order to perform a successful dental procedure. Tissue engineering allows for controlled growth of alveolar and periodontal tissues, with use of scaffolds, cells, and signalling molecules. By modulating the patient's tissues, it can positively influence poor integration and healing, resulting in repeated implant surgeries. Application of nanomaterials and stem cells in tissue regeneration is a newly developing field, with great potential for maxillofacial bony defects. Nanostructured scaffolds provide a closer structural support with natural bone, while stem cells allow bony tissue regeneration in places when a certain volume of bone is crucial to perform a successful implantation. Several types of selected nanomaterials and stem cells were discussed in this study. Their use has a high impact on the efficacy of the current and future procedures, which are still challenging for medicine. There are many factors that can influence the regenerative process, while its general complexity makes the whole process even harder to control. The aim of this study was to evaluate the effectiveness and advantage of both stem cells and nanomaterials in order to better understand their function in regeneration of bone tissue in oral cavity.

An Alginate-Based Hydrogel with a High Angiogenic Capacity and a High Osteogenic Potential

In bone tissue engineering, autologous cells are combined with osteoconductive scaffolds and implanted into bone defects. The major challenge is the lack of post-implantation vascular growth into biomaterial. The objective of the present study was to develop a new alginate-based hydrogel that enhances the regeneration of bone defects after surgery. The viability of human bone marrow-derived mesenchymal stem cells (BM-MSCs) or human endothelial cells (ECs) cultured alone or together on the hydrogel was analyzed for 24 and 96 h. After seeding, the cells self-assembled and aggregated to form clusters. For functional validation, empty or cellularized hydrogel matrices were implanted ectopically at subcutaneous sites in nude mice. After 2 months, the matrices were explanted. Transplanted human cells were present, and we observed vessels expressing human von Willebrand factor (resulting from the incorporation of transplanted ECs into neovessels and/or the differentiation of BM-MSCs into ECs). The addition of BM-MSCs improved host vascularization and neovessel formation from human cells, relative to ECs alone. Although we did not observe bone formation, the transplanted BM-MSCs were able to differentiate into osteoblasts. This new biomaterial provided an appropriate three-dimensional environment for transplanted cells and has a high angiogenic capacity and an osteogenic potential.

Adult mesenchymal stem cells: is there a role for purine receptors in their osteogenic differentiation?

The role played by mesenchymal stem cells (MSCs) in contributing to adult tissue homeostasis and damage repair thanks to their differentiation capabilities has raised a great interest, mainly in bone regenerative medicine. The growth/function of these undifferentiated cells of mesodermal origin, located in specialized structures (niches) of differentiated organs is influenced by substances present in this microenvironment. Among them, ancestral and ubiquitous molecules such as adenine-based purines, i.e., ATP and adenosine, may be included. Notably, extracellular purine concentrations greatly increase during tissue injury; thus, MSCs are exposed to effects mediated by these agents interacting with their own receptors when they act/migrate in vivo or are transplanted into a damaged tissue. Here, we reported that ATP modulates MSC osteogenic differentiation via different P2Y and P2X receptors, but data are often inconclusive/contradictory so that the ATP receptor importance for MSC physiology/differentiation into osteoblasts is yet undetermined. An exception is represented by P2X7 receptors, whose expression was shown at various differentiation stages of bone cells resulting essential for differentiation/survival of both osteoclasts and osteoblasts. As well, adenosine, usually derived from extracellular ATP metabolism, can promote osteogenesis, likely via A2B receptors, even though findings from human MSCs should be implemented and confirmed in preclinical models. Therefore, although many data have revealed possible effects caused by extracellular purines in bone healing/remodeling, further studies, hopefully performed in in vivo models, are necessary to identify defined roles for these compounds in favoring/increasing the pro-osteogenic properties of MSCs and thereby their usefulness in bone regenerative medicine.

Bone regeneration in rabbit calvarial defects using PRGF and adipose-derived stem cells: histomorphometrical analysis

Aim: The aim of this study was to evaluate the osteogenic potential of adipose-derived stem cells (ADSCs) and to assess the influence of plasma rich in growth factors (PRGF) on bone regeneration using ADSCs. Materials & methods: Bone defects were randomly allocated to the five treatment modalities: spontaneous healing, natural bovine bone mineral (BBM), BBM loaded with PRGF, BBM loaded with ADSCs and BBM loaded with a combination of ADSCs and PRGF. Results: The PRGF significantly enhanced the biomaterial-to-bone contact. Defects treated with ADSCs and PRGF or a combination of both showed the greatest bone regeneration. Conclusion: Combining PRGF and ADSCs boosts the bone graft regenerative potential at the earliest period of healing.

Healing of Bone Defects in Pig's Femur Using Mesenchymal Cells Originated from the Sinus Membrane with Different Scaffolds

Objective

Repairing bone defects, especially in older individuals with limited regenerative capacity, is still a big challenge. The use of biomimetic materials that can enhance the restoration of bone structure represents a promising clinical approach. In this study, we evaluated ectopic bone formation after the transplantation of human maxillary Schneiderian sinus membrane- (hMSSM-) derived cells embedded within various scaffolds in the femur of pigs.

Methods

The scaffolds used were collagen, gelatin, and hydroxyapatite/tricalcium phosphate (HA/βTCP) where fibrin/thrombin was used as a control. Histological analysis was performed for the new bone formation. Quantitative real-time PCR (qRT-PCR) and immunohistochemistry (IHC) were used to assess mRNA and protein levels of specific osteoblastic markers, respectively.

Results

Histological analysis showed that the three scaffolds we used can support new bone formation with a more pronounced effect observed in the case of the gelatin scaffold. In addition, mRNA levels of the different tested osteoblastic markers Runt-Related Transcription Factor 2 (RUNX-2), osteonectin (ON), osteocalcin (OCN), osteopontin (OPN), alkaline phosphatase (ALP), and type 1 collagen (COL1) were higher, after 2 and 4 weeks, in cell-embedded scaffolds than in control cells seeded within the fibrin/thrombin scaffold. Moreover, there was a very clear and differential expression of RUNX-2, OCN, and vimentin in osteocytes, osteoblasts, hMSSM-derived cells, and bone matrix. Interestingly, the osteogenic markers were more abundant, at both time points, in cell-embedded gelatin scaffold than in other scaffolds (collagen, HA/βTCP, fibrin/thrombin).

Conclusions

These results hold promise for the development of successful bone regeneration techniques using different scaffolds embedded with hMSSM-derived cells. This trial is registered with NCT02676921.

Biomaterial-assisted local and systemic delivery of bioactive agents for bone repair

Although bone tissues possess an intrinsic capacity for repair, there are cases where bone healing is either impaired or insufficient, such as fracture non-union, osteoporosis, osteomyelitis, and cancers. In these cases, treatments like surgical interventions are used, either alone or in combination with bioactive agents, to promote tissue repair and manage associated clinical complications. Improving the efficacy of bioactive agents often requires carriers, with biomaterials being a pivotal player. In this review, we discuss the role of biomaterials in realizing the local and systemic delivery of biomolecules to the bone tissue. The versatility of biomaterials enables design of carriers with the desired loading efficiency, release profile, and on-demand delivery. Besides local administration, systemic administration of drugs is necessary to combat diseases like osteoporosis, warranting bone-targeting drug delivery systems. Thus, chemical moieties with the affinity towards bone extracellular matrix components like apatite minerals have been widely utilized to create bone-targeting carriers with better biodistribution, which cannot be achieved by the drugs alone. Bone-targeting carriers combined with the desired drugs or bioactive agents have been extensively investigated to enhance bone healing while minimizing off-target effects. Herein, these advancements in the field have been systematically reviewed. STATEMENT OF SIGNIFICANCE: Drug delivery is imperative when surgical interventions are not sufficient to address various bone diseases/defects. Biomaterial-assisted delivery systems have been designed to provide drugs with the desired loading efficiency, sustained release, and on-demand delivery to enhance bone healing. By surveying recent advances in the field, this review outlines the design of biomaterials as carriers for the local and systemic delivery of bioactive agents to the bone tissue. Particularly, biomaterials that bear chemical moieties with affinity to bone are attractive, as they can present the desired bioactive agents to the bone tissue efficiently and thus enhance the drug efficacy for bone repair.

Personalized Design of Functional Gradient Bone Tissue Engineering Scaffold

The porous structure of the natural bone not only has the characteristics of lightweight and high strength, but also is conducive to the growth of cells and tissues due to interconnected pores. In this paper, a novel gradient-controlled parametric modeling technology is presented to design bone tissue engineering (BTE) scaffold. First of all, the method functionalizes the pore distribution in the bone tissue, and reconstructs the pore distribution of the bone tissue in combination with the pathological analysis of the bone defect area of the individual patient. Then, based on the reconstructed pore distribution, the Voronoi segmentation algorithm and the contour interface optimization method are used to reconstruct the whole model of the bone tissue. Finally, the mechanical properties of the scaffold are studied by the finite element analysis (FEA) of different density gradient scaffolds. The results show that the method is highly feasible. BTE scaffold can be designed by irregular design methods and adjustment of pore distribution parameters, which is similar with natural bone in structural characteristics and biomechanical properties.

Improved bone regeneration through amniotic membrane loaded with buccal fat pad-derived MSCs as an adjuvant in maxillomandibular reconstruction

BACKGROUND

Human amniotic membranes (HAMs), as a biological membrane with healing, osteogenic, and cell therapy potential, has been in the spotlight to enhance the outcomes of treating bone defects. Present study aims to clinically assess the potential of HAM loaded with buccal fat pad-derived stem cells (BFSCs) as an osteogenic coverage for onlay bone grafts to maxillomandibular bone defects.

MATERIALS AND METHODS

Nine patients with jaw bone defects were enrolled in the present study. The patients were allocated to two study groups: Iliac crest bone graft with HAM coverage (n = 5), and Iliac bone grafts covered with HAM loaded with BFSCs (n = 4). Five months following the grafting and prior to implant placement, cone beam computed tomography was performed for radiomorphometric analysis.

RESULTS

The mean increase in bone width was found to be significantly greater in the HAM + BFSCs group (4.42 ± 1.03 mm versus 3.07 ± 0.73 mm, p < 0.05). Further, the changes in vertical dimension were greater in the HAM + BFSCs group (4.66 ± 1.06 mm versus 4.14 ± 1.03 mm, p > 0.05).

CONCLUSION

Combined use of HAM with mesenchymal stem cells may enhance bone regeneration specifically in the horizontal dimension. Moreover, this methodology reduces the amount of harvested autogenous bone and diminish secondary bone resorption.

Evaluation of the Osteogenic Potential of Different Scaffolds Embedded with Human Stem Cells Originated from Schneiderian Membrane: An In Vitro Study

BACKGROUND

Novel treatments for bone defects, particularly in patients with poor regenerative capacity, are based on bone tissue engineering strategies which include mesenchymal stem cells (MSCs), bioactive factors, and convenient scaffold supports.

OBJECTIVE

In this study, we aimed at comparing the potential for different scaffolds to induce osteogenic differentiation of human maxillary Schneiderian sinus membrane- (hMSSM-) derived cells. Methods. hMSSM-derived cells were seeded on gelatin, collagen, or Hydroxyapatite β-Tricalcium phosphate-Fibrin (Haβ-TCP-Fibrin) scaffolds. Cell viability was determined using an MTT assay. Alizarin red staining method, Alkaline phosphatase (ALP) activity assay, and quantitative real-time PCR analysis were performed to assess hMSSM-derived cells osteogenic differentiation.

RESULTS

Cell viability, calcium deposition, ALP activity, and osteoblastic markers transcription levels were most striking in gelatin scaffold-embedded hMSSM-derived cells.

CONCLUSION

Our findings suggest a promising potential for gelatin-hMSSM-derived cell construct for treating bone defects.

Buccal Fat Pad-Derived Stem Cells in Three-Dimensional Rehabilitation of Large Alveolar Defects: A Report of Two Cases

This case report seeks to describe efficient clinical application of adipose-derived stem cells (AdSCs) originated from buccal fat pad (BFP) in combination with conventional guided bone regeneration as protected healing space for reconstruction of large alveolar defects after extraction of multiple impacted teeth. The first case was a 19-year-old woman with several impacted teeth in the maxillary and mandibular regions, which could not be forced to erupt and were recommended for surgical extraction by the orthodontist. After this procedure, a large bone defect was created, and this space was filled by AdSC loaded natural bovine bone mineral (NBBM), which was protected with lateral ramus cortical plates, microscrews, and collagen membrane. After 6 months of post-guided bone regeneration, the patient received 6 and 7 implant placements, respectively, in the maxilla and mandible. At 10 months postoperatively, radiographic evaluation revealed thorough survival of implants. The second case was a 22-year-old man with the same complaint and large bony defects created after his teeth were extracted. After 6 months of post-guided bone regeneration, he received 4 dental implants in his maxilla and 7 implants in the mandible. At 48 months postoperatively, radiographs showed complete survival of implants. This approach represented a considerable amount of 3-dimensional bone formation in both cases, which enabled us to use dental implant therapy for rehabilitation of the whole dentition. The application of AdSCs isolated from BFP in combination with NBBM can be considered an efficient treatment for bone regeneration in large alveolar bone defects.

Dexamethasone loaded multi-layer poly-l-lactic acid/pluronic P123 composite electrospun nanofiber scaffolds for bone tissue engineering and drug delivery

In tissue engineering, it is common to mix drugs that can control proliferation and differentiation of cells into polymeric solutions as part of composite to get bioactive scaffolds. However, direct incorporation of drugs might potentially result in undesired burst release. To overcome this problem, here we developed electrospun multilayer drug loaded poly-l-lactic acid/pluronic P123 (PLLA-P123) composite scaffolds. The drug was loaded into the middle layer. The surface, the mechanical and physiochemical properties of the scaffolds were evaluated. The drug release profiles were monitored. Finally, the osteogenic proliferation and differentiation potential were determined. The scaffolds fabricated here have appropriate surface properties, but with different mechanical strength and osteogenic proliferation and differentiation. Multi-layer scaffolds where the drug was in the middle layer and PLLA-plasma and PLLA-P123 with cover layer showed the best osteogenic proliferation and differentiation than the other groups of scaffolds. The drug release profiles of the scaffolds were completely different: single layer scaffolds showed burst release within the first day, while multilayer scaffolds showed controlled release. Therefore, the multilayer drug loaded scaffolds prepared have dual benefits can provide both better osteogenesis and controlled release of drugs and bioactive molecules at the implant site.

Comparison of Intraoral Bone Regeneration with Iliac and Alveolar BMSCs

This study compared the osteogenic potential of bone marrow mesenchymal stem cells (BMSCs) of iliac and alveolar origins (I-BMSCs and Al-BMSCs, respectively), which were transplanted in combination with β tricalcium phosphate (β-TCP) in peri-implant bone defects to investigate the osseointegration between dental implants and tissue-engineered bone in dogs. Specifically, I-BMSCs and Al-BMSCs were cultured, characterized, and seeded on β-TCP and subjected to immunoblotting analyses and alkaline phosphatase activity assays. Subsequently, these cell-seeded scaffolds were implanted into defects that were freshly generated in the mandibular premolar areas of 4 dogs. The defects were covered with β-TCP + Al-BMSCs ( n = 6), β-TCP + I-BMSCs ( n = 6), or β-TCP ( n = 6) or served as the blank control ( n = 6). After healing for 12 wk, the formation and mineralization of new bones were assessed through micro-computed tomographic, histologic, and histomorphometric analyses, and bone-to-implant contacts were measured in the specimens. It was evident that in this large animal model, I-BMSCs and Al-BMSCs manifested similarly strong osteogenic potential, as significantly more new bone was formed in the Al-BMSC and I-BMSC groups than otherwise ( P < 0.01). Therefore, Al-BMSCs are emerging as an efficient alternative for autologous mesenchymal stem cells in regenerative dental and maxillofacial therapies. I-BMSCs, if not restricted in their bioavailability, can also be of great utility in bone tissue-engineering applications.

Lateral Ramus Cortical Bone Plate in Alveolar Cleft Osteoplasty with Concomitant Use of Buccal Fat Pad Derived Cells and Autogenous Bone: Phase I Clinical Trial

Tissue regeneration has become a promising treatment for craniomaxillofacial bone defects such as alveolar clefts. This study sought to assess the efficacy of lateral ramus cortical plate with buccal fat pad derived mesenchymal stem cells (BFSCs) in treatment of human alveolar cleft defects. Ten patients with unilateral anterior maxillary cleft met the inclusion criteria and were assigned to three treatment groups. First group was treated with anterior iliac crest (AIC) bone and a collagen membrane (AIC group), the second group was treated with lateral ramus cortical bone plate (LRCP) with BFSCs mounted on a natural bovine bone mineral (LRCP+BFSC), and the third group was treated with AIC bone, BFSCs cultured on natural bovine bone mineral, and a collagen membrane (AIC+BFSC). The amount of regenerated bone was measured using cone beam computed tomography 6 months postoperatively. AIC group showed the least amount of new bone formation (70 ± 10.40%). LRCP+BFSC group demonstrated defect closure and higher amounts of new bone formation (75 ± 3.5%) but less than AIC+BFSC (82.5 ± 6.45%), suggesting that use of BFSCs within LRCP cage and AIC may enhance bone regeneration in alveolar cleft bone defects; however, the differences were not statistically significant. This clinical trial was registered at clinicaltrial.gov with NCT02859025 identifier.

An improved surface for enhanced stem cell proliferation and osteogenic differentiation using electrospun composite PLLA/P123 scaffold

Poly-L-lactic acid (PLLA) nano fibrous scaffolds prepared by electrospinning technology have been used widely in tissue engineering applications. However, PLLA scaffolds are hydrophobic in nature, moreover the fibrous porous structure produced by electrospinning makes the scaffolds even more hydrophobic which generally limits cell attachment and proliferation. Polymer blending is one of the several efforts used so far to enhance hydrophilicity and recognized as an easy cost-effective approach for the manipulation physiochemical properties of polymeric biomaterials. Pluronic block copolymers containing hydrophilic poly(ethylene oxide) (PEO) blocks and hydrophobic poly(propylene oxide) (PPO) blocks are arranged in triblock structure: PEO-PPO-PEO. It is commonly used recently to blend hydrophobic polymers to enhance hydrophilicity for pharmaceutical and tissue engineering applications. In this study, novel pluronic P123 blend PLLA electrospun nanofibre scaffolds with improved hydrophilicity and biological properties were fabricated. The surface morphology and surface chemistry of the nanofibre scaffolds were characterized by scanning electron microscope (SEM) and FTIR analyses. Surface hydrophilicity and change in mechanical properties were studied. The ability of the scaffolds to support the attachment, and proliferation and differentiation of human adipose tissue derived MSCs, were evaluated generally. The fabricated scaffolds have completely improved, hydrophilicity, similar osteogenic differentiation potential with plasma-treated PLLA nanofibre scaffold, and hence P123 blend PLLA electrospun nanofibre scaffolds are a very good and cost effective choice as a scaffold for bone tissue engineering application.

Buccal Fat Pad as a Potential Source of Stem Cells for Bone Regeneration: A Literature Review

Adipose tissues hold great promise in bone tissue engineering since they are available in large quantities as a waste material. The buccal fat pad (BFP) is a specialized adipose tissue that is easy to harvest and contains a rich blood supply, and its harvesting causes low complications for patients. This review focuses on the characteristics and osteogenic capability of stem cells derived from BFP as a valuable cell source for bone tissue engineering. An electronic search was performed on all in vitro and in vivo studies that used stem cells from BFP for the purpose of bone tissue engineering from 2010 until 2016. This review was organized according to the PRISMA statement. Adipose-derived stem cells derived from BFP (BFPSCs) were compared with adipose tissues from other parts of the body (AdSCs). Moreover, the osteogenic capability of dedifferentiated fat cells (DFAT) derived from BFP (BFP-DFAT) has been reported in comparison with BFPSCs. BFP is an easily accessible source of stem cells that can be obtained via the oral cavity without injury to the external body surface. Comparing BFPSCs with AdSCs indicated similar cell yield, morphology, and multilineage differentiation. However, BFPSCs proliferate faster and are more prone to producing colonies than AdSCs.

Cranioplasty with Adipose-Derived Stem Cells, Beta-Tricalcium Phosphate Granules and Supporting Mesh: Six-Year Clinical Follow-Up Results

Several alternative techniques exist to reconstruct skull defects. The complication rate of the cranioplasty procedure is high and the search for optimal materials and techniques continues. To report long-term results of patients who have received a cranioplasty using autologous adipose-derived stem cells (ASCs) seeded on beta-tricalcium phosphate (betaTCP) granules. Between 10/2008 and 3/2010, five cranioplasties were performed (four females, one male; average age 62.0 years) using ASCs, betaTCP granules and titanium or resorbable meshes. The average defect size was 8.1 × 6.7 cm² . Patients were followed both clinically and radiologically. The initial results were promising, with no serious complications. Nevertheless, in the long-term follow-up, three of the five patients were re-operated due to graft related problems. Two patients showed marked resorption of the graft, which led to revision surgery. One patient developed a late infection (7.3 years post-operative) that required revision surgery and removal of the graft. One patient had a successfully ossified graft, but was re-operated due to recurrence of the meningioma 2.2 years post-operatively. One patient had an uneventful clinical follow-up, and the cosmetic result is satisfactory, even though skull x-rays show hypodensity in the borders of the graft. Albeit no serious adverse events occurred, the 6-year follow-up results of the five cases are unsatisfactory. The clinical results are not superior to results achieved by conventional cranial repair methods. The use of stem cells in combination with betaTCP granules and supporting meshes in cranial defect reconstruction need to be studied further before continuing with clinical trials. Stem Cells Translational Medicine 2017;6:1576-1582.

Repair of bone defects using adipose-derived stem cells combined with alpha-tricalcium phosphate and gelatin sponge scaffolds in a rat model

Objectives

This study aimed to evaluate the potential of adipose-derived stem cells (ASCs) combined with a modified α-tricalcium phosphate (α-TCP) or gelatin sponge (GS) scaffolds for bone healing in a rat model.

Material and Methods

Bone defects were surgically created in the femur of adult SHR rats and filled with the scaffolds, empty or combined with ASCs. The results were analyzed by histology and histomorphometry on days seven, 14, 30, and 60.

Results

Significantly increased bone repair was observed on days seven and 60 in animals treated with α-TCP/ASCs, and on day 14 in the group treated with GS/ASCs, when compared with the groups treated with the biomaterials alone. Intense fibroplasia was observed in the group treated with GS alone, on days 14 and 30.

Conclusions

Our results showed that the use of ASCs combined with α-TCP or GS scaffolds resulted in increased bone repair. The higher efficacy of the α-TCP scaffold suggests osteoconductive property that results in a biological support to the cells, whereas the GS scaffold functions just as a carrier. These results confirm the potential of ASCs in accelerating bone repair in in vivo experimental rat models. These results suggest a new alternative for treating bone defects.

Induced pluripotent stem cells as a new getaway for bone tissue engineering: A systematic review

OBJECTIVES

Mesenchymal stem cells (MSCs) are frequently used for bone regeneration, however, they are limited in quantity. Moreover, their proliferation and differentiation capabilities reduce during cell culture expansion. Potential application of induced pluripotent stem cells (iPSCs) has been reported as a promising alternative source for bone regeneration. This study aimed to systematically review the available literature on osteogenic potential of iPSCs and to discuss methods applied to enhance their osteogenic potential.

METHODS AND MATERIALS

A thorough search of MEDLINE database was performed from January 2006 to September 2016, limited to English-language articles. All in vitro and in vivo studies on application of iPSCs in bone regeneration were included.

RESULTS

The current review is organized according to the PRISMA statement. Studies were categorized according to three different approaches used for osteo-induction of iPSCs. Data are summarized and reported according to the following variables: types of study, cell sources used for iPSC generation, applied reprogramming methods, applied osteo-induction methods and treatment groups.

CONCLUSION

According to the articles reviewed, osteo-induced iPSCs revealed osteogenic capability equal to or superior than MSCs; cell sources do not significantly affect osteogenic potential of iPSCs; addition of resveratrol to the osteogenic medium (OM) and irradiatiation after osteogenic induction reduce teratoma formation in animal models; transfection with lentiviral bone morphogenetic protein 2 results in higher mineralization compared to osteo-induction in OM; addition of TGF-β, IGF-1 and FGF-β to OM increases osteogenic capability of iPSCs.

Application of selected scaffolds for bone tissue engineering: a systematic review

PURPOSE

The current systematic review investigated the results of application of some of the most commonly used scaffolds in conjugation with stem cells and growth factors in animal and clinical studies.

METHODS

A comprehensive electronic search was conducted according to the PRISMA guidelines in NCBI PMC and PubMed from January 1970 to December 2015 limited to English language publications with available full texts. In vivo studies in relation to "bone healing," "bone regeneration," and at least one of the following items were investigated: allograft, β-tricalcium phosphate, deproteinized bovine bone mineral, hydroxyapetite/tricalcium phosphate, nanohydroxyapatite, and composite scaffolds.

RESULTS

A total of 1252 articles were reviewed, and 46 articles completely fulfilled the inclusion criteria of this study. The highest bone regeneration has been achieved when combination of all three elements, given scaffolds, mesenchymal stem cells, and growth factors, were used. Among studies being reported in this review, bone marrow mesenchymal stem cells are the most studied mesenchymal stem cells, β-tricalcium phosphate is the most frequently used scaffold, and platelet-rich plasma is the most commonly used growth factor.

CONCLUSION

The current review aimed to inform reconstructive surgeons of how combinations of various mesenchymal stem cells, scaffolds, and growth factors enhance bone regeneration. The highest bone regeneration has been achieved when combination of all three elements, given scaffolds, mesenchymal stem cells, and growth factors, were used.

The effect of a platelet-rich fibrin conduit on neurosensory recovery following inferior alveolar nerve lateralization: a preliminary clinical study

This retrospective study aimed to assess the recovery of neurosensory dysfunction following modified inferior alveolar nerve (IAN) lateralization surgery compared to the conventional approach. Data from two groups of patients who underwent IAN lateralization in 2014 were included in this study. In one group, platelet-rich fibrin was placed over the IAN and this was protected with a collagen membrane conduit; the other group underwent the conventional IAN lateralization procedure. Implants were placed immediately. Neurosensory dysfunction was evaluated at 3, 6, and 12 months post-surgery. Demographic, neurosensory disturbance (NSD), subjective two-point discrimination test (TPD), and static light touch test (SLT) data were obtained. Twenty-three IAN lateralization procedures with the placement of 51 implants were performed in 14 patients. At the 6-month follow-up, the number of patients experiencing normal sensation was greater in the modified surgery group, but the 12-month follow-up results were the same in the two groups. More precise sensation was observed with the TPD in the modified group at 6 months, and the modified group demonstrated better SLT scores at 6 months. Although the two groups had comparable results at the 12-month follow-up, it was observed that the modified technique accelerated neural healing within 6 months and reduced the length of the discomfort period.

Bone engineering in dog mandible: Coculturing mesenchymal stem cells with endothelial progenitor cells in a composite scaffold containing vascular endothelial growth factor

We sought to assess the effects of coculturing mesenchymal stem cells (MSCs) and endothelial progenitor cells (EPCs) in the repair of dog mandible bone defects. The cells were delivered in β-tricalcium phosphate scaffolds coated with poly lactic co-glycolic acid microspheres that gradually release vascular endothelial growth factor (VEGF). The complete scaffold and five partial scaffolds were implanted in bilateral mandibular body defects in eight beagles. The scaffolds were examined histologically and morphometrically 8 weeks after implantation. Histologic staining of the decalcified scaffolds demonstrated that bone formation was greatest in the VEGF/MSC scaffold (63.42 ± 1.67), followed by the VEGF/MSC/EPC (47.8 ± 1.87) and MSC/EPC (45.21 ± 1.6) scaffolds, the MSC scaffold (34.59 ± 1.49), the VEGF scaffold (20.03 ± 1.29), and the untreated scaffold (7.24 ± 0.08). Hence, the rate of new bone regeneration was highest in scaffolds containing MSC, either mixed with EPC or incorporating VEGF. Adding both EPC and VEGF with the MSC was not necessary. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1767-1777, 2017.

Application of buccal fat pad-derived stem cells in combination with autogenous iliac bone graft in the treatment of maxillomandibular atrophy: a preliminary human study

Stem cell therapy for the treatment of bone defects is an alternative or adjunct to autologous bone grafting. This study assessed the efficacy of buccal fat pad-derived stem cells (BFPSCs) with iliac bone block grafting for the treatment of extensive human alveolar ridge defects. Eight patients with extensive jaw atrophy were selected for this study. The jaws were reconstructed with non-vascularized anterior iliac crest bone blocks. Gaps between the blocks were filled with freeze-dried bone granules and covered with a collagen membrane. In the test group (n=4), these granules were seeded with BFPSCs. Cone beam computed tomography scans were used to assess the amount of new bone formed at six sites in each patient. Trephine biopsies of 2-mm were also taken from the graft site during implant placement for histomorphometric analysis. The mean bone width change at the graft site was greater in the test group than in the control group (3.94±1.62mm vs. 3.01±0.89mm). New bone formation was 65.32% in the test group versus 49.21% in the control group. The application of BFPSCs in conjunction with iliac bone block grafts may increase the amount of new bone formation and decrease secondary bone resorption in extensively atrophic jaws.

Polymeric scaffolds in tissue engineering: a literature review

The tissue engineering scaffold acts as an extracellular matrix that interacts to the cells prior to forming new tissues. The chemical and structural characteristics of scaffolds are major concerns in fabricating of ideal three-dimensional structure for tissue engineering applications. The polymer scaffolds used for tissue engineering should possess proper architecture and mechanical properties in addition to supporting cell adhesion, proliferation, and differentiation. Much research has been done on the topic of polymeric scaffold properties such as surface topographic features (roughness and hydrophilicity) and scaffold microstructures (pore size, porosity, pore interconnectivity, and pore and fiber architectures) that influence the cell-scaffold interactions. In this review, efforts were given to evaluate the effect of both chemical and structural characteristics of scaffolds on cell behaviors such as adhesion, proliferation, migration, and differentiation. This review would provide the fundamental information which would be beneficial for scaffold design in future. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 431-459, 2017.

Stem cell therapy for bone repair: a systematic review and meta-analysis of preclinical studies with large animal models

AIM

Injury to bone is a significant clinical challenge, due to its limited regenerative capacity. The current methods of repairing bone defect are surgical, highly invasive and not always successful. A systematic review and meta-analysis of preclinical studies involving large animals with bone defects were conducted to determine the treatment outcomes with stem cell therapies.

METHODS

A random effects meta-analysis of the available studies was conducted to assess the treatment outcomes including the rate of new bone formation and new bone mineral density (BMD). Stratified analyses were also conducted by separating studies based on each characteristic independently.

RESULTS

Pooled analysis of 20 preclinical studies showed a significant beneficial effect of stem cell therapy in increasing new bone formation (17.79%, 95% confidence interval [CI], 10.54, 25.03; P < 0.001) and BMD (276.94 mg cm(-2) , 95% CI, 62.71, 491.17; P < 0.001) for disease amelioration. Regarding new bone formation, a statistical improvement was similarly detected from randomized controlled trial groups (17.06%, 95% CI, 8.87, 25.24; P < 0.001) and cohort groups (17.43%, 95% CI, 10.79, 24.07; P < 0.001). Exploratory stratified analysis yielded significant predictors of new bone formation including cell number (<10(7) vs. ≥10(7) ; P = 0.048) and the route of cell delivery (combining with matrix scaffold showed more effect than direct cell injection, P = 0.041). The effect of stem cell therapy diminished after 12 weeks.

CONCLUSION

The study results suggest that stem cell therapy improves new bone formation and BMD in bone defect models. Future trials should focus on the transplantation of ≥10(7) stem cells, especially using slow release biodegradable scaffolds or repetitive cell injections.

Regenerative medicine in the treatment of alveolar cleft defect: A systematic review of the literature

Despite a possible risk of donor site morbidity, autogenous bone grafting is considered the gold standard treatment for human alveolar cleft defect. Tissue engineering methods have recently been investigated with the aim of minimizing donor site morbidities. Here we systematically review the various tissue engineering methods applied to human alveolar cleft defects. An electronic search was conducted in the PubMed database up to March 2014. Tissue engineering studies on human alveolar subjects were included, and experiments that did not report quality or quantity of new regenerated bone were excluded. Twenty human experiments were included in our review. Regenerative techniques for alveolar cleft bone reconstruction were divided into cell therapy, growth factor application, and a combination of both cell therapy and growth factor. Using these three regenerative methods, a wide range of new bone formation percentages were reported. Due to insufficient evidence and controlled clinical trials, the treatment efficacy of tissue engineering in alveolar cleft bone defects could not be determined. Well-designed controlled studies are needed so that detailed outcomes can be properly compared.

Smart scaffolds in bone tissue engineering: A systematic review of literature

AIM: To improve osteogenic differentiation and attachment of cells.

METHODS: An electronic search was conducted in PubMed from January 2004 to December 2013. Studies which performed smart modifications on conventional bone scaffold materials were included. Scaffolds with controlled release or encapsulation of bioactive molecules were not included. Experiments which did not investigate response of cells toward the scaffold (cell attachment, proliferation or osteoblastic differentiation) were excluded.

RESULTS: Among 1458 studies, 38 met the inclusion and exclusion criteria. The main scaffold varied extensively among the included studies. Smart modifications included addition of growth factors (group I-11 studies), extracellular matrix-like molecules (group II-13 studies) and nanoparticles (nano-HA) (group III-17 studies). In all groups, surface coating was the most commonly applied approach for smart modification of scaffolds. In group I, bone morphogenetic proteins were mainly used as growth factor stabilized on polycaprolactone (PCL). In group II, collagen 1 in combination with PCL, hydroxyapatite (HA) and tricalcium phosphate were the most frequent scaffolds used. In the third group, nano-HA with PCL and chitosan were used the most. As variable methods were used, a thorough and comprehensible compare between the results and approaches was unattainable.

CONCLUSION: Regarding the variability in methodology of these in vitro studies it was demonstrated that smart modification of scaffolds can improve tissue properties.

Wnt signaling behaves as a "master regulator" in the osteogenic and adipogenic commitment of human amniotic fluid mesenchymal stem cells

Human amniotic fluid mesenchymal stem cells (huAFMSCs) are emerging as a promising therapeutic option in regenerative medicine. Here, we characterized huAFMSC phenotype and multipotentiality. When cultured in osteogenic medium, huAFMSC displayed a significant increase in: Alkaline Phosphatase (ALP) activity and mRNA expression, Alizarin Red S staining and Runx2 mRNA expression; whereas maintaining these cells in an adipogenic culture medium gave a time-dependent increase in PPARγ and FABP4 mRNA expression, glycerol-3-phosphate dehydrogenase (GPDH) activity and positivity to Oil Red Oil staining. These results confirm that huAFMSCs can differentiate toward osteogenic and adipogenic phenotypes. The canonical Wnt/ßcatenin signaling pathway appears to trigger huAFMSC osteoblastogenesis, since during early phases of osteogenic differentiation, the expression of Dishevelled-2 (Dvl-2), of the non-phosphorylated form of ß-catenin, and the phosphorylation of glycogen synthase kinase-3ß (GSK3ß) at serine 9 were upregulated. On the contrary, during adipogenic differentiation Dvl-2 expression decreased, whereas that of ß-catenin remained unchanged. This was associated with a late increase in GSK3ß phosphorylation. Consistent with this scenario, huAFMSCs exposure to Dickkopf-1, a selective inhibitor of the Wnt signaling, abolished Runx2 and ALP mRNA upregulation during huAFMSC osteogenic differentiation, whereas it enhanced FABP4 expression in adipocyte-differentiating cells. Taken together, these results unravel novel molecular determinants of huAFMSC commitment towards osteoblastogenesis, which may represent potential targets for directing the differentiation of these cells and improving their use in regenerative medicine.

Figure

The osteoregenerative effects of platelet-derived growth factor BB cotransplanted with mesenchymal stem cells, loaded on freeze-dried mineral bone block: a pilot study in dog mandible

Due to shortcomings associated with autogenous bone graft, the gold standard of craniofacial grafting, investigators seek alternatives that are accessible, efficient, and affordable. Accordingly, in the present pilot study, bone regeneration was induced using bone marrow-derived mesenchymal stem cells (BMSCs) loaded onto freeze-dried mineral bone block (FDMBB) in the presence or absence of recombinant platelet-derived growth factor-BB (rh PDGF-BB). Eight weeks after the bilateral extraction of premolars of four mongrel dogs, 25 × 10 mm defects were created at both sides of the mandible. The right mandible received autogenous-BMSC loaded on FDMBB (MSC group), whereas the left mandible received cellular blocks impregnated with rhPDGF-BB (MSC + PDGF Group). Animals were euthanized 8 weeks after grafting. Micro-computed tomography (micro-CT) and histomorphometric analysis demonstrated higher levels of bone formation for the test group (10.34% ± 0.20 and 26.63% ± 3.14, respectively) when compared to the control group (8.20% ± 0.20 and 21.38% ± 5.11). The differences were not statistically significant (P > 0.05). According to the performed micro-CT and histomorphometric analysis, adding 0.5 mg rhPDGF-BB (0.3 mg/mL) to the combination of BMSC/FDMBB did not significantly increase bone formation in supracrestal defect in dog mandible.

Natural history of mesenchymal stem cells, from vessel walls to culture vessels

Mesenchymal stem/stromal cells (MSCs) can regenerate tissues by direct differentiation or indirectly by stimulating angiogenesis, limiting inflammation, and recruiting tissue-specific progenitor cells. MSCs emerge and multiply in long-term cultures of total cells from the bone marrow or multiple other organs. Such a derivation in vitro is simple and convenient, hence popular, but has long precluded understanding of the native identity, tissue distribution, frequency, and natural role of MSCs, which have been defined and validated exclusively in terms of surface marker expression and developmental potential in culture into bone, cartilage, and fat. Such simple, widely accepted criteria uniformly typify MSCs, even though some differences in potential exist, depending on tissue sources. Combined immunohistochemistry, flow cytometry, and cell culture have allowed tracking the artifactual cultured mesenchymal stem/stromal cells back to perivascular anatomical regions. Presently, both pericytes enveloping microvessels and adventitial cells surrounding larger arteries and veins have been described as possible MSC forerunners. While such a vascular association would explain why MSCs have been isolated from virtually all tissues tested, the origin of the MSCs grown from umbilical cord blood remains unknown. In fact, most aspects of the biology of perivascular MSCs are still obscure, from the emergence of these cells in the embryo to the molecular control of their activity in adult tissues. Such dark areas have not compromised intents to use these cells in clinical settings though, in which purified perivascular cells already exhibit decisive advantages over conventional MSCs, including purity, thorough characterization and, principally, total independence from in vitro culture. A growing body of experimental data is currently paving the way to the medical usage of autologous sorted perivascular cells for indications in which MSCs have been previously contemplated or actually used, such as bone regeneration and cardiovascular tissue repair.

Adipose stem cells used to reconstruct 13 cases with cranio-maxillofacial hard-tissue defects

Although isolated reports of hard-tissue reconstruction in the cranio-maxillofacial skeleton exist, multipatient case series are lacking. This study aimed to review the experience with 13 consecutive cases of cranio-maxillofacial hard-tissue defects at four anatomically different sites, namely frontal sinus (3 cases), cranial bone (5 cases), mandible (3 cases), and nasal septum (2 cases). Autologous adipose tissue was harvested from the anterior abdominal wall, and adipose-derived stem cells were cultured, expanded, and then seeded onto resorbable scaffold materials for subsequent reimplantation into hard-tissue defects. The defects were reconstructed with either bioactive glass or β-tricalcium phosphate scaffolds seeded with adipose-derived stem cells (ASCs), and in some cases with the addition of recombinant human bone morphogenetic protein-2. Production and use of ASCs were done according to good manufacturing practice guidelines. Follow-up time ranged from 12 to 52 months. Successful integration of the construct to the surrounding skeleton was noted in 10 of the 13 cases. Two cranial defect cases in which nonrigid resorbable containment meshes were used sustained bone resorption to the point that they required the procedure to be redone. One septal perforation case failed outright at 1 year because of the postsurgical resumption of the patient's uncontrolled nasal picking habit.

Injectable bone tissue engineering using expanded mesenchymal stem cells

Patients suffering from bone defects are often treated with autologous bone transplants, but this therapy can cause many complications. New approaches are therefore needed to improve treatment for bone defects, and stem cell therapy presents an exciting alternative approach. Although extensive evidence from basic studies using stem cells has been reported, few clinical applications using stem cells for bone tissue engineering have been developed. We investigated whether injectable tissue-engineered bone (TEB) composed of mesenchymal stem cells (MSCs) and platelet-rich plasma was able to regenerate functional bone in alveolar deficiencies. We performed these studies in animals and subsequently carried out large-scale clinical studies in patients with long-term follow-up; these showed good bone formation using minimally invasive MSC transplantation. All patients exhibited significantly improved bone volume with no side effects. Newly formed bone areas at 3 months were significantly increased over the preoperation baseline (p < .001) and reached levels equivalent to that of native bone. No significant bone resorption occurred during long-term follow-up. Injectable TEB restored masticatory function in patients. This novel clinical approach represents an effective therapeutic utilization of bone tissue engineering.

GMP-level adipose stem cells combined with computer-aided manufacturing to reconstruct mandibular ameloblastoma resection defects: Experience with three cases

Background:

The current management of large mandibular resection defects involves harvesting of autogenous bone grafts and repeated bending of generic reconstruction plates. However, the major disadvantage of harvesting large autogenous bone grafts is donor site morbidity and the major drawback of repeated reconstruction plate bending is plate fracture and difficulty in reproducing complex facial contours. The aim of this study was to describe reconstruction of three mandibular ameloblastoma resection defects using tissue engineered constructs of beta-tricalcium phosphate (β-TCP) granules, recombinant human bone morphogenetic protein-2 (rhBMP-2), and Good Manufacturing Practice (GMP) level autologous adipose stem cells (ASCs) with progressively increasing usage of computer-aided manufacturing (CAM) technology.

Materials and Methods:

Patients’ three-dimensional (3D) images were used in three consecutive patients to plan and reverse-engineer patient-specific saw guides and reconstruction plates using computer-aided additive manufacturing. Adipose tissue was harvested from the anterior abdominal walls of three patients before resection. ASCs were expanded ex vivo over 3 weeks and seeded onto a β-TCP scaffold with rhBMP-2. Constructs were implanted into patient resection defects together with rapid prototyped reconstruction plates.

Results:

All three cases used one step in situ bone formation without the need for an ectopic bone formation step or vascularized flaps. In two of the three patients, dental implants were placed 10 and 14 months following reconstruction, allowing harvesting of bone cores from the regenerated mandibular defects. Histological examination and in vitro analysis of cell viability and cell surface markers were performed and prosthodontic rehabilitation was completed.

Discussion:

Constructs with ASCs, β-TCP scaffolds, and rhBMP-2 can be used to reconstruct a variety of large mandibular defects, together with rapid prototyped reconstruction hardware which supports placement of dental implants.

Bone morphogenetic protein-2, -6, and -7 differently regulate osteogenic differentiation of human periodontal ligament stem cells

The utility of adult stem cells for bone regeneration may be an attractive alternative in the treatment of extensive injury, congenital malformations, or diseases causing large bone defects. To create an environment that is supportive of bone formation, signals from molecules such as the bone morphogenetic proteins (BMPs) are required to engineer fully viable and functional bone. We therefore determined whether BMP-2, -6, and -7 differentially regulate the (1) proliferation, (2) mineralization, and (3) mRNA expression of bone/mineralized tissue associated genes of human periodontal ligament stem cells (hPDLSCs), which were obtained from periodontal ligament tissue of human impacted third molars. hPDLSCs from six participants were isolated and characterized using histochemical and immunohistochemical methods. A real-time cell analyzer was used to evaluate the effects of BMP-2, -6, and -7 on the proliferation of hPDLSCs. hPDLSCs were treated with Dulbecco's modified Eagle's medium containing different concentrations of BMP-2, -6, and -7 (10, 25, 50, 100 ng/mL) and monitored for 264 hours. After dose-response experiments, 50 and 100 ng/mL concentrations of BMPs were used to measure bone/mineralized tissue-associated gene expression. Type I collagen, bone sialoprotein, osteocalcin, osteopontin, and osteoblastic transcription factor Runx2 mRNA expression of hPDLSCs treated with BMP-2, -6, and -7, were evaluated using quantitative RT-PCR. Biomineralization of hPDLSCs was assessed using von Kossa staining. This study demonstrated that BMPs at various concentrations differently regulate the proliferation, mineralization, and mRNA expression of bone/mineralized tissue associated genes in hPDLSCs. BMPs regulate hPDLSC proliferation in a time and dose-dependent manner when compared to an untreated control group. BMPs induced bone/mineralized tissue-associated gene mRNA expression and biomineralization of hPDLSCs. The most pronounced induction occurred in the BMP-6 group in the biomineralization of the hPDLSCs. Our data suggest that BMP-2, -6, and -7 are potent regulators of hPDLSC gene expression and biomineralization. Employing BMPs with hPDLSCs isolated from periodontal ligament tissues provides a promising strategy for bone tissue engineering.