Synthesis and structure of samarium benzyl complex supported by bridged bis(guanidinate) ligand and its reactivity toward nitriles and phenyl isocyanate

Dipolar Coupling as a Mechanism for Fine Control of Magnetic States in ErCOT-Alkyl Molecular Magnets

The design of molecular magnets has progressed greatly by taking advantage of the ability to impart successive perturbations and control vibronic transitions in 4fn systems through the careful manipulation of the crystal field. Herein, we control the orientation and rigidity of two dinuclear ErCOT-based molecular magnets: the inversion-symmetric bridged [ErCOT(μ-Me)(THF)]2 (2) and the nearly linear Li[(ErCOT)2(μ-Me)3] (3). The conserved anisotropy of the ErCOT synthetic unit facilitates the direction of the arrangement of its magnetic anisotropy for the purposes of generating controlled internal magnetic fields, improving control of the energetics and transition probabilities of the electronic angular momentum states with exchange biasing via dipolar coupling. This control is evidenced through the introduction of a second thermal barrier to relaxation operant at low temperatures that is twice as large in 3 as in 2. This barrier acts to suppress through-barrier relaxation by protecting the ground state from interacting with stray local fields while operating at an energy scale an order of magnitude smaller than the crystal field term. These properties are highlighted when contrasted against the mononuclear structure ErCOT(Bn)(THF)2 (1), in which quantum tunneling of the magnetization processes dominate, as demonstrated by magnetometry and ab initio computational methods. Furthermore, far-infrared magnetospectroscopy measurements reveal that the increased rigidity imparted by successive removal of solvent ligands when adding bridging methyl groups, along with the increased excited state purity, severely limits local spin-vibrational interactions that facilitate magnetic relaxation, manifesting as longer relaxation times in 3 relative to those in 2 as temperature is increased.

Guanidinates as Alternative Ligands for Organometallic Complexes

For decades, ligands such as phosphanes or cyclopentadienyl ring derivatives have dominated Coordination and Organometallic Chemistry. At the same time, alternative compounds have emerged that could compete either for a more practical and accessible synthesis or for greater control of steric and electronic properties. Guanidines, nitrogen-rich compounds, appear as one such potential alternatives as ligands or proligands. In addition to occurring in a plethora of natural compounds, and thus in compounds of pharmacological use, guanidines allow a wide variety of coordination modes to different metal centers along the periodic table, with their monoanionic chelate derivatives being the most common. In this review, we focused on the organometallic chemistry of guanidinato compounds, discussing selected examples of coordination modes, reactivity and uses in catalysis or materials science. We believe that these amazing ligands offer a new promise in Organometallic Chemistry.

Assembly of metallo-macrocycles through reductive C-C coupling of alkylnitriles by an Mg-Mg-bonded compound

Low-valent metal complexes have attracted much research interest owing to their novel reactivities toward small molecules. Herein the reactivity of the α-diimine-ligated, Mg-Mg-bonded compound [K(THF)₃]₂[LMg-MgL] (1, L = [(2,6-iPr₂C₆H₃)NC(Me)]₂^2-) with aliphatic nitriles has been studied. Complex 1 readily activates n-alkylnitriles (RCN; R = propyl, butyl, and pentyl) to afford the unique trinuclear magnesium metallo-macrocyclic complexes, [LMg(μ-{(NC-C(R)C(CH₂R)-NH})]₃[K₃(Solv)₆] (2-4: R = -(CH₂)_nCH₃, n = 2, 3, or 4; Solv = THF/DME), through a reductive deprotonation of the α-H of one nitrile molecule and C-C coupling between this α-carbon and the cyanide (CN) group of another nitrile, followed by a 1,3-H shift. The results demonstrate the possibility of assembling supramolecular architectures based on the α-diimine [LMg] fragment through small molecule activation.

Lanthanide-Catalyzed Tandem Addition of Amines to Cyanoalkenes: Synthesis of Cyclic Amidines

A tandem insertion of aliphatic nitriles and unactivated alkenes to the N-H bond of secondary aliphatic amines catalyzed by simple trialkyl rare-earth metal complexes was disclosed. This reaction provides a highly atom-economic and stereoselective way to a range of cyclic amidines under mild reaction conditions.

Calcium and Magnesium Bis(β-diketiminate) Complexes: Impact of the Alkylene Bridge on Schlenk-Type Rearrangements

Dinuclear heteroleptic alkaline-earth-metal complexes are interesting synthetic targets because the close proximity of two metals allows for cooperative effects. However, these complexes are also prone to undergoing Schlenk-type rearrangements, affording less-active homoleptic complexes. Here we present the metalation of bis(β-diketimine) ligands possessing flexible bridging groups, i.e., 1,2-ethylene, 1,3-propylene, and trans-1,2-cyclohexylene, using calcium and magnesium precursors. Four mononuclear homoleptic calcium complexes were obtained, highlighting the pronounced tendency of calcium to undergo Schlenk-like redistributions. In the case of magnesium, however, the bridging group plays a crucial role, yielding seven dinuclear heteroleptic complexes but also one mononuclear and one dinuclear homoleptic complexes. In addition, a trinuclear mixed heteroleptic-homoleptic magnesium complex, which is a rare example of an intermediate of the Schlenk equilibrium, was isolated.

Synthesis, structure, and catalytic activity of dinuclear aluminium bis(amidinate) and bis(guanidinate) complexes

The ring-opening polymerization grand prix: Bis(amidinate)s outpaced their bis(guanidinate) competitors and won the race, while the drivers’ engines using acidic co-initiators collapsed before take-off.

Ditopic bis(N,N',N'-substituted 1,2-ethanediamine) ligands: synthesis and coordination chemistry

The synthesis of two different types of bis(N,N',N'-substituted 1,2-ethanediamine)s, bridged either through the secondary (type 1) or tertiary (type 2) amine groups is reported. Selected protio-ligands have been applied in subsequent metallation reactions using aluminium, magnesium, tin, and zinc sources allowing to isolate five mononuclear and eight dinuclear complexes. All complexes have been fully characterized and their solid-state structures have been studied by means of single-crystal X-ray diffraction analysis. Nine of the 13 complexes carry reactive alkyl, amide or hydride groups, which indicates their potential as catalysts or supports for (transition) metals.

Magnesium bis(amidinate) and bis(guanidinate) complexes: impact of the ligand backbone and bridging groups on the coordination behaviour

A library of ten dinucleating bis(amidine) and bis(guanidine) ligands, in which the bridging groups, terminal rests, and backbone substituents were systematically altered, has been synthesized and subsequently applied in metallation reactions using three different magnesium sources. Eight Mg complexes could be isolated and fully characterized, and in seven cases their solid-state structure could be determined by means of single crystal X-ray diffraction analysis. The results evidence a versatile coordination behaviour, which ranges from the first dinuclear heteroleptic magnesium iodide complex to dinuclear homoleptic complexes. These findings indicate the crucial impact of both the ligand and the magnesium source not only on the accessibility of well-defined dinuclear complexes but also on the aggregation in solution and in the solid state.

Ligands with Two Monoanionic N,N-Binding Sites: Synthesis and Coordination Chemistry

Polytopic ligands have become ubiquitous in coordination chemistry because they grant access to a variety of mono- and polynuclear complexes of transition metals as well as rare-earth and main-group elements. Nitrogen-based ditopic ligands, in which two monoanionic N,N-binding sites are framed within one molecule, are of particular importance and are therefore the primary focus of this review. In detail, bis(amidine)s, bis(guanidine)s, bis(β-diimine)s, bis(aminotroponimine)s, bis(pyrrolimine)s, and miscellaneous bis(N,N-chelating) ligands are reviewed. In addition to the general synthetic protocols, the application of these ligands is discussed along with their coordination chemistry, the multifarious binding modes, and the ability of these ligands to bridge two (or more) metal(loids).

Theoretical characterization and design of highly efficient iridium (III) complexes bearing guanidinate ancillary ligand

A density functional theory/time-depended density functional theory was used to investigate the synthesized guanidinate-based iridium(III) complex [(ppy)2Ir{(N(i)Pr)2C(NPh2)}] (1) and two designed derivatives (2 and 3) to determine the influences of different cyclometalated ligands on photophysical properties. Except the conventional discussions on geometric relaxations, absorption and emission properties, many relevant parameters, including spin-orbital coupling (SOC) matrix elements, zero-field-splitting parameters, radiative rate constants (kr) and so on were quantitatively evaluated. The results reveal that the replacement of the pyridine ring in the 2-phenylpyridine ligand with different diazole rings cannot only enlarge the frontier molecular orbital energy gaps, resulting in a blue-shift of the absorption spectra for 2 and 3, but also enhance the absorption intensity of 3 in the lower-energy region. Furthermore, it is intriguing to note that the photoluminescence quantum efficiency (ΦPL) of 3 is significantly higher than that of 1. This can be explained by its large SOC value<T1|HSO|Sn>(n=3-4) and large transition electric dipole moment (μS3), which could significantly contribute to a larger kr. Besides, compared with 1, the higher emitting energy (ET1) and smaller <S0|HSO|T1>(2) value for 3 may lead to a smaller non-radiative decay rate. Additionally, the detailed results also indicate that compared to 1 with pyridine ring, 3 with imidazole ring performs a better hole injection ability. Therefore, the designed complex 3 can be expected as a promising candidate for highly efficient guanidinate-based phosphorescence emitter for OLEDs applications.