Effect of porous tantalum on promoting the osteogenic differentiation of bone marrow mesenchymal stem cells in vitro through the MAPK/ERK signal pathway

Ti/Ta-based composite polysaccharide scaffolds for guided bone regeneration in total hip arthroplasty

Guided bone regeneration can play an important role in orthopedic applications. This work presents the synthesis and characterization of composite scaffolds based on polysaccharides loaded with microparticles of titanium or tantalum as novel materials proposed for composite systems with promising characteristics for guided bone regeneration. Ti/Ta composite scaffolds were synthesized using chitosan and gellan gum as organic substrates and crosslinked with oxidized dextran resulting in stable inorganic-organic composites. Physico-chemical characterization revealed a uniform distribution of metal nanoparticles within the scaffolds that showed a release of metals lower than 5 %. In vitro biological assays demonstrated that Ta composites exhibit a 2 times higher ALP activity than Ti and a higher capacity to support the full differentiation of human mesenchymal stem cells into osteoblasts. These results highlight their potential for bone regeneration applications.

3D-printed porous tantalum artificial bone scaffolds: fabrication, properties, and applications

Porous tantalum scaffolds offer a high degree of biocompatibility and have a low friction coefficient. In addition, their biomimetic porous structure and mechanical properties, which closely resemble human bone tissue, make them a popular area of research in the field of bone defect repair. With the rapid advancement of additive manufacturing, 3D-printed porous tantalum scaffolds have increasingly emerged in recent years, offering exceptional design flexibility, as well as facilitating the fabrication of intricate geometries and complex pore structures that similar to human anatomy. This review provides a comprehensive description of the techniques, procedures, and specific parameters involved in the 3D printing of porous tantalum scaffolds. Concurrently, the review provides a summary of the mechanical properties, osteogenesis and antibacterial properties of porous tantalum scaffolds. The use of surface modification techniques and the drug carriers can enhance the characteristics of porous tantalum scaffolds. Accordingly, the review discusses the application of these porous tantalum materials in clinical settings. Multiple studies have demonstrated that 3D-printed porous tantalum scaffolds exhibit exceptional corrosion resistance, biocompatibility, and osteogenic properties. As a result, they are considered highly suitable biomaterials for repairing bone defects. Despite the rapid development of 3D-printed porous tantalum scaffolds, they still encounter challenges and issues when used as bone defect implants in clinical applications. Ultimately, a concise overview of the primary challenges faced by 3D-printed porous tantalum scaffolds is offered, and corresponding insights to promote further exploration and advancement in this domain are presented.

Salivary nitrate prevents osteoporosis via regulating bone marrow mesenchymal stem cells proliferation and differentiation

Background

Nitrate, a key component of saliva, has been shown widely physiological functions in the human body. But its function on bone metabolism remains unclear. The aim of this study was to investigate the function and mechanism of saliva nitrate on osteoporosis and the function of bone marrow mesenchymal stem cells (BMSCs).

Methods

Saliva nitrate removal or supplemental interventions were performed for 1 month in ovariectomized (OVX) osteopenia mice. The nitrate levels in saliva and serum were detected. The bone formation and bone microarchitecture in the OVX mouse model were investigated by quantitative Micro--computed tomography imaging, histological staining and serum bone biomarker analysis. The effects of nitrate on the functional homeostasis of BMSCs in OVX mice were explored by Ki67 immunofluorescence staining, Ki67 flow staining, alizarin red staining, qPCR and western blotting. Finally, downstream signaling pathways were screened by proteomics and verified by western blotting.

Results

The results showed that nitrate deficiency exacerbated osteoporosis, while nitrate administration prevent osteoporosis in OVX mice. Nitrate increased the expression of PINP, a biomarker of bone formation, in OVX mice. Besides, nitrate enhanced the proliferative capacity and osteogenic function of BMSCs in OVX mice in vitro and in vivo. In addition, nitrate upregulated the expression levels of osteogenesis-related genes ALP, Run2 and OPN of BMSCs. EGFR and mTOR signaling were screened as the key downstream of nitrate, and phosphorylated protein levels of its subfamily members AKT, ERK and S6K were significantly upregulated by nitrate.

Conclusion

The present results showed saliva nitrate preventively protects against osteoporosis through enhances the proliferation and osteogenic differentiation potential of BMSCs. The effects of nitrate on bone homeostasis are closely related to the EGFR/AKT/ERK and mTOR/S6K signaling axes.

The translational potential of this article

Our study provides experimental evidence for the use of saliva nitrate as an effective candidate for the prevention of osteoporosis and maintenance of bone homeostasis.

Evaluation of sustained drug release performance and osteoinduction of magnetron-sputtered tantalum-coated titanium dioxide nanotubes

Modifying the drug-release capacity of titanium implants is essential for maintaining their long-term functioning. Titanium dioxide nanotube (TNT) arrays, owing to their drug release capacity, are commonly used in the biomaterial sphere. Their unique half open structure and arrangement in rows increase the drug release capacity. However, their rapid drug release ability not only reduces drug efficiency but also produces excessive local and systemic deposition of antibiotics. In this study, we designed a tantalum-coated TNT system for drug-release optimization. A decreased nanotube size caused by the tantalum nanocoating was observed through SEM and analyzed (TNT: 110 nm, TNT-Ta1: 80 nm, TNT-Ta3: 40 nm, TNT-Ta5: 20 nm, TNT-Ta7: <5 nm). XPS analysis revealed the distribution of the chemical components, especially that of the tantalum element. In vitro experiments showed that the tantalum nanocoating enhanced cell proliferation; in particular, TNT-Ta5 possessed the best cell viability (about 1.18 of TNT groups at 7d). It also showed that the tantalum nanocoating had a positive effect on osteogenesis (especially TNT-Ta5 and TNT-Ta7). Additionally, hydrophilic/hydrophobic drug (vancomycin/raloxifene) release results indicated that the TNT-Ta5 group possessed the most desirable sustained release capacity. Moreover, in this drug release system, the hydrophobic drug showed more sustained release capacity than the hydrophilic drug (vancomycin: sustained release for more than 48 h, raloxifene: sustained release for more than 168 h). More importantly, TNT-Ta5 is proved to be an appropriate drug release system, which possesses cytocompatibility, osteogenic capacity, and sustained drug release capacity.

Morphology of Nanostructured Tantalum Oxide Controls Stem Cell Differentiation and Improves Corrosion Behavior

Tantalum is receiving increasing attention in the biomedical field due to its biocompatible nature and superior mechanical properties. However, the bioinert nature of tantalum still poses a challenge and limits its integration into the bone tissue. To address these issues, we fabricated nanotubular (NT), nanocoral (NC), and nanodimple morphologies on tantalum surfaces via anodization. The size of these nanofeatures was engineered to be approximately 30 nm for all anodized samples. Thus, the influence of the anodized nanostructured morphology on the chemical and biological properties of tantalum was evaluated. The NT and NC samples exhibited higher surface roughness, surface energy, and hydrophilicity compared to the nonanodized samples. In addition, the NT samples exhibited the highest corrosion resistance among all of the investigated samples. Biological experiments indicated that NT and NC samples promoted human adipose tissue-derived mesenchymal stem cell (hADMSC) spreading and proliferation up to 5 days in vitro. ALP, COL1A1, and OSC gene expressions as well as calcium mineral synthesis were upregulated on the NT and NC samples in the second and third weeks in vitro. These findings highlight the significance of nanostructured feature morphology for anodized tantalum, where the NT morphology was shown to be a potential candidate for orthopedic applications.

Cell response and bone ingrowth to 3D printed Ti6Al4V scaffolds with Mg-incorporating sol-gel Ta2O5 coating

In recent years, additive manufacturing techniques have been used to fabricate 3D titanium (Ti)-based scaffolds for production of desirable complex shapes. However, insufficient osteointegration of porous Ti-based scaffolds can elicit long-term complications (e.g., aseptic loosening) and need further revision surgery. In this study, a magnesium (Mg)-incorporating tantalum (Ta) coating was deposited on a 3D Ti6Al4V scaffold using a sol-gel method for enhancing its osteogenic properties. To evaluate the biofunction of this surface, bone mesenchymal stem cells and rabbit femoral condyle were used to assess the cell response and bone ingrowth, respectively. Ta2O5 coatings and Mg-incorporating Ta2O5 coatings were both homogeneously deposited on porous scaffolds. In vitro studies revealed that both coatings exhibit enhanced cell proliferation, ALP activity, osteogenic gene expression and mineralization compared with the uncoated Ti6Al4V scaffold. Especially for Mg-incorporating Ta2O5 coatings, great improvements were observed. In vivo studies, including radiographic examination, fluorochrome labeling and histological evaluation also followed similar trends. Also, bone ingrowth to scaffolds with Mg-incorporating Ta2O5 coatings exhibited the most significant increase compared with uncoated and Ta2O5 coated scaffolds. All the above results indicate that Mg-doped Ta2O5 coatings are an effective tool for facilitating osteointegration of conventional porous Ti6Al4V scaffolds.

Research progress and clinical translation of three-dimensional printed porous tantalum in orthopaedics

With continuous developments in additive manufacturing technology, tantalum (Ta) metal has been manufactured into orthopaedic implants with a variety of forms, properties and uses by three-dimensional printing. Based on extensive research in recent years, the design, processing and performance aspects of this new orthopaedic implant material have been greatly improved. Besides the bionic porous structure and mechanical characteristics that are similar to human bone tissue, porous tantalum is considered to be a viable bone repair material due to its outstanding corrosion resistance, biocompatibility, bone integration and bone conductivity. Numerous in vitro, in vivo, and clinical studies have been carried out in order to analyse the safety and efficacy of these implants in orthopaedic applications. This study reviews the most recent advances in manufacturing, characteristics and clinical application of porous tantalum materials.

Stem cell therapy combined with core decompression versus core decompression alone in the treatment of avascular necrosis of the femoral head: a systematic review and meta-analysis

INTRODUCTION

Accumulated clinical trials had been focused on stem cell therapy in combination of core decompression (CD) in the treatment of avascular necrosis of the femoral head (ANFH). Nonetheless, the results were inconclusive. Here, we performed a systematic review and meta-analysis of previous randomized controlled trials (RCTs) and retrospective studies to assess whether combined stem cell augmentation with CD improved the outcomes of ANFH compared with CD alone.

METHODS

The current study included 11 RCTs and 7 retrospective studies reporting the clinical outcomes of a total of 916 patients and 1257 hips. 557 and 700 hips received CD and CD plus stem cell therapy, respectively. To compare CD with CD plus stem cell therapy, we examined the clinical evaluating scores, the occurrence of the femoral head, radiologic progression and conversion to total hip arthroplasty (THA).

RESULTS

Only 10 studies reported significantly greater improvement in hip functions while combining stem cell procedure with CD. The pooled results in subgroup analysis indicated that stem cell group had a lower collapse rate on a mid-term basis (P = 0.001), when combined with mechanical support (P < 0.00001), and with extracted stem cells (P = 0.0002). Likewise, stem cell group had a lower radiographic progression rate at 2- to 5-year follow-up [P = 0.003], when combined with structural grafting (P < 0.00001), and with extracted stem cells (P = 0.004). Stem cell therapy resulted in an overall lower THA conversion rate (P < 0.0001) except that at a follow-up longer than 5 years.

CONCLUSION

Stem cell therapy combined with core decompression was more effective in preventing collapse, radiographic progression and conversion to THA. Trial Registration The current protocol has been registered in PROSPERO with the registration number: CRD42023417248.

Integrating physicomechanical and biological strategies for BTE: biomaterials-induced osteogenic differentiation of MSCs

Large bone defects are a major global health concern. Bone tissue engineering (BTE) is the most promising alternative to avoid the drawbacks of autograft and allograft bone. Nevertheless, how to precisely control stem cell osteogenic differentiation has been a long-standing puzzle. Compared with biochemical cues, physicomechanical stimuli have been widely studied for their biosafety and stability. The mechanical properties of various biomaterials (polymers, bioceramics, metal and alloys) become the main source of physicomechanical stimuli. By altering the stiffness, viscoelasticity, and topography of materials, mechanical stimuli with different strengths transmit into precise signals that mediate osteogenic differentiation. In addition, externally mechanical forces also play a critical role in promoting osteogenesis, such as compression stress, tensile stress, fluid shear stress and vibration, etc. When exposed to mechanical forces, mesenchymal stem cells (MSCs) differentiate into osteogenic lineages by sensing mechanical stimuli through mechanical sensors, including integrin and focal adhesions (FAs), cytoskeleton, primary cilium, ions channels, gap junction, and activating osteogenic-related mechanotransduction pathways, such as yes associated proteins (YAP)/TAZ, MAPK, Rho-GTPases, Wnt/β-catenin, TGFβ superfamily, Notch signaling. This review summarizes various biomaterials that transmit mechanical signals, physicomechanical stimuli that directly regulate MSCs differentiation, and the mechanical transduction mechanisms of MSCs. This review provides a deep and broad understanding of mechanical transduction mechanisms and discusses the challenges that remained in clinical translocation as well as the outlook for the future improvements.

Preparation, modification, and clinical application of porous tantalum scaffolds

Porous tantalum (Ta) implants have been developed and clinically applied as high-quality implant biomaterials in the orthopedics field because of their excellent corrosion resistance, biocompatibility, osteointegration, and bone conductivity. Porous Ta allows fine bone ingrowth and new bone formation through the inner space because of its high porosity and interconnected pore structure. It contributes to rapid bone integration and long-term stability of osseointegrated implants. Porous Ta has excellent wetting properties and high surface energy, which facilitate the adhesion, proliferation, and mineralization of osteoblasts. Moreover, porous Ta is superior to classical metallic materials in avoiding the stress shielding effect, minimizing the loss of marginal bone, and improving primary stability because of its low elastic modulus and high friction coefficient. Accordingly, the excellent biological and mechanical properties of porous Ta are primarily responsible for its rising clinical translation trend. Over the past 2 decades, advanced fabrication strategies such as emerging manufacturing technologies, surface modification techniques, and patient-oriented designs have remarkably influenced the microstructural characteristic, bioactive performance, and clinical indications of porous Ta scaffolds. The present review offers an overview of the fabrication methods, modification techniques, and orthopedic applications of porous Ta implants.

Sustained intra-articular reactive oxygen species scavenging and alleviation of osteoarthritis by biocompatible amino-modified tantalum nanoparticles

Recent studies highlight the vital role of oxidative stress and reactive oxygen species (ROS) during progression of osteoarthritis (OA). Attenuating oxidative stress and reducing reactive oxygen species generation in joints represent reasonable strategies for the treatment of osteoarthritis. To address the potential question for clinical translation, and improve the biocompatibility and long-term performance of current antioxidants, the present study provided high biocompatible small positively charged tantalum nanoparticles (Ta-NH₂ NPs) with sustained intra-articular catalase activity and first applied to osteoarthritis intervention. Our in vitro results showed that Ta-NH₂ NPs were stable with good biocompatibility, and protected viability and hyaline-like phenotype in H₂O₂-challenged chondrocytes. In addition, the in vivo biodistribution data demonstrated a sustained retention of Ta-NH₂ NPs in the joint cavity, particularly in articular cartilage without organ toxicity and abnormality in hemogram or blood biochemistry indexes. Finally, compared with catalase (CAT), Ta-NH₂ NPs exhibited long-term therapeutic effect in monosodium iodoacetate (MIA) induced osteoarthritis model. This study preliminarily explored the potential of simply modified metal nanoparticles as effective reactive oxygen species scavenging agent for osteoarthritis intervention, and offered a novel strategy to achieve sustained reactive oxygen species suppression using biocompatible Ta-based nano-medicine in oxidative stress related diseases.

An Appearance Data-Driven Model Visualizes Cell State and Predicts Mesenchymal Stem Cell Regenerative Capacity

Mesenchymal stem cells (MSCs) are widely used in treating various diseases. However, lack of a reliable evaluation approach to characterize the potency of MSCs has dampened their clinical applications. Here, a function-oriented mathematical model is established to evaluate and predict the regenerative capacity (RC) of MSCs. Processed by exhaustive testing, the model excavates four optimal fitted indices, including nucleus roundness, nucleus/cytoplasm ratio, side-scatter height, and ERK1/2 from the given index combinations. Notably, three of them except ERK1/2 are cell appearance-associated features. The predictive power of the model is validated via screening experiments of these indices by predicting the RC of newly enrolled and chemical inhibitor-treated MSCs. Further RNA-sequencing analysis reveals that cell appearance-based indices may serve as major indicators to visualize the results of integration-weighted signals in and out of cells and reflect MSC stemness. In general, this study proposes an appearance data-driven predictive model for the RC and stemness of MSCs.

Bone Tissue Engineering in the Treatment of Bone Defects

Bones play an important role in maintaining exercise and protecting organs. Bone defect, as a common orthopedic disease in clinics, can cause tremendous damage with long treatment cycles. Therefore, the treatment of bone defect remains as one of the main challenges in clinical practice. Today, with increased incidence of bone disease in the aging population, demand for bone repair material is high. At present, the method of clinical treatment for bone defects including non-invasive therapy and invasive therapy. Surgical treatment is the most effective way to treat bone defects, such as using bone grafts, Masquelet technique, Ilizarov technique etc. In recent years, the rapid development of tissue engineering technology provides a new treatment strategy for bone repair. This review paper introduces the current situation and challenges of clinical treatment of bone defect repair in detail. The advantages and disadvantages of bone tissue engineering scaffolds are comprehensively discussed from the aspect of material, preparation technology, and function of bone tissue engineering scaffolds. This paper also summarizes the 3D printing technology based on computer technology, aiming at designing personalized artificial scaffolds that can accurately fit bone defects.

Three-dimensional Printing of Biomimetic Titanium Mimicking Trabecular Bone Induces Human Mesenchymal Stem Cell Proliferation: An In-vitro Analysis

STUDY DESIGN

In vitro analysis.

OBJECTIVE

The aim of this study was to assess the effect of three-dimensional (3D) printing of porous titanium on human mesenchymal stem cell (hMSC) adhesion, proliferation, and osteogenic differentiation.

SUMMARY OF BACKGROUND DATA

A proprietary implant using three-dimensional porous titanium (3D-pTi) that mimics trabecu-lar bone structure, roughness, porosity, and modulus of elasticity was created (Ti-LIFE technology™, Spineart SA Switzerland). Such implants may possess osteoinductive properties augmenting fusion in addition to their structural advantages. However, the ability of 3D-pTi to affect in vitro cellular proliferation and osteogenic differentiation remains undefined.

METHODS

Disks of 3D-pTi with a porosity of 70% to 75% and pore size of 0.9 mm were produced using additive manufacturing technology. 2D Ti6Al4V (2D-Ti) and 2D polyetheretherketone (2D-PEEK) disks were prepared using standard manufacturing process. Tissue culture plastic (TCP) served as the control surface. All discs were characterized using 2D-micros-copy, scanning electron microscopy (SEM), and x-ray micro-computed tomography. Forty thousand hMSCs were seeded on the disks and TCP and cultured for 42 days. hMSC morphology was assessed using environmental SEM and confocal imaging following phalloidin staining. hMSC proliferation was evaluated using DNA fluorescent assay. hMSC differentiation was assessed using RT-qPCR for genes involved in hMSC osteogenic differentiation and biochemical assays were performed for alkaline phosphatase activity (ALP) and calcium content.

RESULTS

3D-pTi lead to a higher cell number as compared to 2D-Ti and 2D-PEEK at D21, D28 and D42. ALP activity of hMSCs seeded into 3D-pTi scaffolds was as high as or higher than that of hMSCs seeded onto TCP controls over all time points and consistently higher than that of hMSCs seeded onto 2D-Ti scaffolds. However, when ALP activity was normalized to protein content, no statistical differences were found between all scaffolds tested and TCP controls.

CONCLUSION

3D-pTi provides a scaffold for bone formation that structurally mimics cancellous bone and improves hMSC adhesion and proliferation compared to 2D-Ti and PEEK.

Assessment of tantalum nanoparticle-induced MC3T3-E1 proliferation and underlying mechanisms

OBJECTIVE

In our previous study, tantalum nanoparticle (Ta-NPs) was demonstrated to promote osteoblast proliferation via autophagy induction, but the specific mechanism remains unclear. In the present study, we will explore the potential mechanism.

METHODS

Ta-NPs was characterized by transmission electron microscopy, scanning electron microscopy, dynamic light scattering, and BET specific surface area test. MC3T3-E1 were treated with 0 or 20 μg/mL Ta-NPs with or without pretreatment with 10 μM LY294002, Triciribine, Rapamycin (PI3K/Akt/mTOR pathway inhibitors) for 1 h respectively. Western blotting was used to detect the expressions of pathway proteins and LC3B. CCK-8 assay was used to assess cell viability. Flow cytometry was used to detect apoptosis and cell cycle.

RESULTS

After pretreatment with LY294002, Triciribine and Rapamycin, the p-Akt/Akt ratio of pathway protein in Triciribine and Rapamycin groups decreased (P < 0.05), while the autophagy protein LC3-II/LC3-I in the Rapamycin group was upregulated obviously (P < 0.001). In all pretreated groups, apoptosis was increased (LY294002 group was the most obvious), G1 phase cell cycle was arrested (Triciribine and Rapamycin groups were more obvious), and MC3T3-E1 cells were proliferated much more (P < 0.01, P < 0.001, P < 0.05).

CONCLUSION

Pretreatment with Triciribine or Rapamycin has a greater effect on pathway protein Akt, cell cycle arrest, autophagy protein, and cell proliferation but with inconsistent magnitude, which may be inferred that the Akt/mTOR pathway, as well as its feedback loop, were more likely involved in these processes.

Tantalum and its derivatives in orthopedic and dental implants: Osteogenesis and antibacterial properties

Implant-associated infections and aseptic loosening are some of the main reasons for implant failure. Therefore, there is an urgent need to improve the osseointegration and antibacterial capabilities of implant materials. In recent years, a large number of breakthroughs in the biological application of tantalum and its derivatives have been achieved. Owing to their corrosion resistance, biocompatibility, osseointegration ability, and antibacterial properties, they have shown considerable potential in orthopedic and dental implant applications. In this review, we provide the latest progress and achievements in the research on osseointegration and antibacterial properties of tantalum as well as its derivatives, and summarize the surface modification methods to enhance their osseointegration and antibacterial properties.

Down-regulated microRNA-199a-3p enhances osteogenic differentiation of bone marrow mesenchymal stem cells by targeting Kdm3a in ovariectomized rats

Osteoporosis is a prevalent systemic skeletal disorder entailing bone fragility and increased fracture risk, often emerging in post-menopausal life. Emerging evidence implicates the dysregulation of microRNAs (miRNAs or miRs) in the progression of osteoporosis. This study investigated the effect of miR-199a-3p on osteoporosis and its underlying mechanism. We first examplished an ovariectomized (OVX)-induced rat osteoporosis model, and then isolated mesenchymal stem cells (MSCs) from bone marrow of the model rats. The overexpression and knock down of miR-199a-3p were conducted in OVX rats and MSCs to verify the role of miR-199a-3p on MSC differentiation. Calcium nodules were measured using alizarin red S (ARS) staining. RT-qPCR and Western blot assay were performed to measure the expression of miR-199a-3p, Kdm3a and osteogenic differentiation-related markers in rat tissues and cells. The correlation between miR-199a-3p and Kdm3a was confirmed using dual-luciferase reporter assay. The enrichment of Kdm3a at the Erk2 and Klf2 promoter was assessed using chromatin immunoprecipitation (ChIP) assay. Isolated MSCs were positive for CD29, CD44, CD90, and CD45, suggesting successful isolation of MSCs. There was increased expression of miR-199a-3p and inhibited osteogenic differentiation in OVX rats. Kdm3a was negatively targeted by miR-199a-3p. Our results also demonstrated that Kdm3a elevated the expression of Erk2 and Erk2 by promoting Erk2 and Klf2 demethylation, which further contributed to osteogenic differentiation. Overall, our results revealed a regulatory network of miR-199a-3p in osteogenic differentiation, highlighting miR-199a-3p as a potential target for therapeutic interventions in osteoporosis.

The Clinical Application of Porous Tantalum and Its New Development for Bone Tissue Engineering

Porous tantalum (Ta) is a promising biomaterial and has been applied in orthopedics and dentistry for nearly two decades. The high porosity and interconnected pore structure of porous Ta promise fine bone ingrowth and new bone formation within the inner space, which further guarantee rapid osteointegration and bone-implant stability in the long term. Porous Ta has high wettability and surface energy that can facilitate adherence, proliferation and mineralization of osteoblasts. Meanwhile, the low elastic modulus and high friction coefficient of porous Ta allow it to effectively avoid the stress shield effect, minimize marginal bone loss and ensure primary stability. Accordingly, the satisfactory clinical application of porous Ta-based implants or prostheses is mainly derived from its excellent biological and mechanical properties. With the advent of additive manufacturing, personalized porous Ta-based implants or prostheses have shown their clinical value in the treatment of individual patients who need specially designed implants or prosthesis. In addition, many modification methods have been introduced to enhance the bioactivity and antibacterial property of porous Ta with promising in vitro and in vivo research results. In any case, choosing suitable patients is of great importance to guarantee surgical success after porous Ta insertion.

Synergistic effects of magnesium ions and simvastatin on attenuation of high-fat diet-induced bone loss

Introduction

Magnesium (Mg) has a prophylactic potential against the onset of hyperlipidemia. Similar to statin, Mg is recommended as lipid-lowering medication for hypercholesterolemia and concomitantly exhibits an association with increased bone mass. The combination of statin with Mg ions (Mg²⁺) may be able to alleviate the high-fat diet (HFD)-induced bone loss and reduce the side-effects of statin. This study aimed to explore the feasibility of combined Mg²⁺ with simvastatin (SIM) for treating HFD-induced bone loss in mice and the involving mechanisms.

Materials and methods

C57BL/6 male mice were fed with a HFD or a normal-fat diet (NFD). Mice were intraperitoneally injected SIM and/or orally received water with additional Mg²⁺ until sacrificed. Enzyme-linked immunosorbent assay was performed to measure cytokines and cholesterol in serum and liver lysates. Bone mineral density (BMD) and microarchitecture were assessed by micro-computed tomography (μCT) in different groups. The adipogenesis in palmitate pre-treated HepG2 cells was performed under various treatments.

Results

μCT analysis showed that the trabecular bone mass was significantly lower in the HFD-fed group than that in NFD-fed group since week 8. The cortical thickness in HFD-fed group had a significant decrease at week 24, as compared with NFD-fed group. The combination of Mg²⁺ and SIM significantly attenuated the trabecular bone loss in HFD-fed mice via arresting the osteoclast formation and bone resorption. Besides, such combination also reduced the hepatocytic synthesis of cholesterol and inhibited matrix metallopeptidase 13 (Mmp13) mRNA expression in pre-osteoclasts.

Conclusions

The combination of Mg²⁺ and SIM shows a synergistic effect on attenuating the HFD-induced bone loss. Our current formulation may be a cost-effective alternative treatment to be indicated for obesity-related bone loss.

•

High-fat diet-fed mouse has a susceptibility to lower trabecular bone mass as compared with that of normal-fat diet-fed mouse.

•

The combination of Mg²⁺ and simvastatin attenuates the trabecular bone loss in high-fat diet-fed mice.

•

The combination of Mg²⁺ and simvastatin reduces the hepatocytic synthesis of cholesterol.

The increased oxygen content in tantalum leads to decreased bioactivity and osteogenic ability of tantalum implants

Tantalum (Ta) implants fabricated by current processing techniques inevitably contain more or less oxygen impurities due to the extremely high melting point and high affinity of oxygen for Ta. Therefore, in this study we investigated whether oxygen impurities cause any effects on the bioactivity of Ta. EDS analysis demonstrated the surface oxygen content difference among different fabricated Ta samples, and the surface water contact angle (WCA) of Ta with high oxygen content (HO-Ta) was significantly higher than that of Ta with medium (MO-Ta) and low (LO-Ta) oxygen content. The in vitro cellular experiments showed that MC3T3-E1 cells on Ta with lower oxygen content exhibited better adhesion, growth, morphological development and in vitro osteogenic ability. Similarly, the in vivo animal experiments indicated the better bone regeneration and ingrowth performances of Ta with lower oxygen content. In addition, the highest ROS production was detected in the HO-Ta group, while the lowest in the LO-Ta group. This study suggests that the oxygen content within Ta, which occurs unavoidably due to technical limitations, negatively affects the bioactivity of Ta in a dose-dependent manner, indicating the need to develop techniques to produce orthopedic all-Ta implants.

Fluorine-incorporated TiO2 nanotopography enhances adhesion and differentiation through ERK/CREB pathway

This study compared the topography of different titanium surface structures (TiO₂ nanotube and grain) with similar elemental compositions (TiO2 and fluorine [F]) on the Ti surface. High magnification indicated that the surfaces of the control and etching groups were similar to each other in a flat, smooth form. The group anodized for 1 h was observed with TiO₂ nanotubes organized very neatly and regularly. In the group anodized for 30 min after etching, uneven wave and nanopore structures were observed. In addition, MTT assay showed that the F of the surface did not adversely affect cell viability, and the initial cell adhesion was increased in the 2.8% F‐incorporated TiO₂ nanograin. At the edge of adherent cells, filopodia were observed in spreading form on the surfaces of the anodizing and two‐step processing groups, and they were observed in a branch shape in the control and etching groups. Moreover, cell adhesion molecule and osteogenesis marker expression was increased at the F‐incorporated TiO₂ nanostructure. In addition, it was found that the expression of p‐extracellular signal‐regulated kinase (ERK) and p‐cAMP response element‐binding protein (CREB) increased in the TiO₂ nanograin with the nanopore surface compared to the micro rough and nanotube surfaces relative to the osteogenic‐related gene expression patterns. As a result, this study confirmed that the topographic structure of the surface is more affected by osteogenic differentiation than the pore size and that differentiation by specific surface composition components is by CREB. Thus, the synergy effect of osteogenic differentiation was confirmed by the simultaneous activation of CREB/ERK.

Investigation of Cytotoxicity, Oxidative Stress, and Inflammatory Responses of Tantalum Nanoparticles in THP-1-Derived Macrophages

Tantalum (Ta) is gaining attention as a biomaterial in bone tissue engineering. Although the clinical advantage of Ta-based implants for primary and revision total joint replacement (TJA) has been well documented, few studies investigated the effect of wear products of Ta implants on peri-implant cells, and their potential contribution to aseptic implant loosening. This study is aimed at examining the cytotoxicity, oxidative stress, and proinflammatory potential of Ta and TiO₂ nanoparticles (NPs) on macrophages in vitro. NPs were characterized using scanning electron microscopy, dynamic light scattering, and energy-dispersive X-ray. To test the NP-mediated cellular response in macrophages, THP-1-derived macrophages were challenged with both NPs, and cytotoxicity was analyzed using CCK-8 and LDH assays. Flow cytometry was used to investigate particle uptake and their internalization routes. NP-mediated oxidative stress was investigated by measuring the production of reactive oxygen species, and their proinflammatory potential was determined by quantifying the production of TNFα and IL-1β in cell culture supernatants using ELISA. We found that both Ta and TiO₂ NPs were taken up through actin-dependent phagocytosis, although TiO₂ NPs did also show some involvement of macropinocytosis and clathrin-mediated endocytosis. Ta NPs caused no apparent toxicity, while TiO₂ NPs demonstrated significant cytotoxicity at a concentration of over 100μg/mL at 24 h. Ta NPs induced negligible ROS generation and proinflammatory cytokines (TNFα, IL-1β) in macrophages. In contrast, TiO₂ NPs markedly induced these effects in a dose-dependent manner. Our findings indicate that Ta NPs are inert, nontoxic, and noninflammatory. Therefore, Ta could be considered an excellent biomaterial in primary and revision joint arthroplasty implants.

The mTOR/ULK1 signaling pathway mediates the autophagy-promoting and osteogenic effects of dicalcium silicate nanoparticles

A novel bioactive inorganic material containing silicon, calcium and oxygen, calcium silicate (Ca₂SiO₄, C₂S) with a CaO-SiO₂ ingredient, has been identified as a potential candidate for artificial bone. Autophagy has an essential function in adult tissue homoeostasis and tumorigenesis. However, little is known about whether silicate nanoparticles (C₂S NPs) promote osteoblastic differentiation by inducing autophagy. Here we investigated the effects of C₂S NPs on bone marrow mesenchymal stem cell differentiation (BMSCs) in osteoblasts. Furthermore, we identified the osteogenic gene and protein expression in BMSCs treated with C₂S NPs. We found that autophagy is important for the ability of C₂S NPs to induce osteoblastic differentiation of BMSCs. Our results showed that treatment with C₂S NPs upregulated the expression of BMP2, UNX2, and OSX in BMSCs, and significantly promoted the expression of LC3 and Beclin, while P62 (an autophagy substrate) was downregulated. C₂S NP treatment could also enhance Alizarin red S dye (ARS), although alkaline phosphatase (ALP) activity was not significantly changed. However, all these effects could be partially reversed by 3-MA. We then detected potential signaling pathways involved in this biological effect and found that C₂S NPs could activate autophagy by suppressing mTOR and facilitating ULK1 expression. Autophagy further activated β-catenin expression and promoted osteogenic differentiation. In conclusion, C₂S NPs promote bone formation and osteogenic differentiation in BMSCs by activating autophagy. They achieve this effect by activating mTOR/ULK1, inducing autophagy, and subsequently triggering the WNT/β-catenin pathway to boost the differentiation and biomineralization of osteoblasts.