Finite element analysis of subtalar joint arthroereisis on adult-acquired flexible flatfoot deformity using customised sinus tarsi implant

Biomechanical role of bone grafting for calcaneal fracture fixation in the presence of bone defect: A finite element analysis

BACKGROUND

The purpose of this study was to compare the biomechanical stress and stability of calcaneal fixations with and without bone defect, before and after bone grafting, through a computational approach.

METHODS

A finite element model of foot-ankle complex was reconstructed, impoverished with a Sanders III calcaneal fracture without bone defect and with moderate and severe bone defects. Plate fixations with and without bone grafting were introduced with walking stance simulated. The stress and fragment displacement of the calcaneus were evaluated.

FINDINGS

Moderate and severe defect increased the calcaneus stress by 16.11% and 32.51%, respectively and subsequently decreased by 10.76% and 20.78% after bone grafting. The total displacement was increased by 3.99% and 24.26%, respectively by moderate and severe defect, while that of posterior joint facet displacement was 86.66% and 104.44%. The former was decreased by 25.73% and 35.96% after grafting, while that of the latter was reduced by 88.09% and 84.78% for moderate and severe defect, respectively.

INTERPRETATION

Our finite element prediction supported that bone grafting for fixation could enhance the stability and reduce the risk of secondary stress fracture in cases of bone defect in calcaneal fracture.

Anatomical Features of the Tarsal Sinus in Patients with Pes Planus: Implications for Clinical Management

BACKGROUND In the treatment of pes planus, if the implant does not match the anatomical structures of the sinus tarsi, synovitis can develop, causing pain symptoms. In the interest of making clinical recommendations for extra-osseous talotarsal stabilization, the goal of the present study was to characterize the anatomical characteristics of the sinus tarsi in patients with pes planus using magnetic resonance imaging (MRI) scans. MATERIAL AND METHODS This was a retrospective study involving 56 pes planus patients and 56 healthy volunteers from January 2014 to May 2022. The sinus tarsi was measured for length and width, for angle with the coronal and sagittal axes, and for length of the subtalar implant. RESULTS All examined metrics showed a difference between pes planus patients and healthy participants, with the exception of the subtalar implant's length. The average sinus tarsi length and width among pes planus patients were 19.23 mm and 2.91 mm, respectively. The angle between the sinus tarsi and the coronal and sagittal axes was 21.418° and 25.077°, while the length of approach was 33.06 mm and 0.76°. The only gender differences that were statistically significant were in the length and width of the sinus tarsi. There were no notable variations between the left and right sides. CONCLUSIONS Sinus tarsi morphology may be impacted by pes planus. When treating patients with pes planus, clinicians should take these anatomical factors into consideration since they might more completely characterize the anatomical features of the sinus tarsi.

Disease-Specific Finite element Analysis of the Foot and Ankle

Finite-element analysis is a computational modeling technique that can be used to quantify parameters that are difficult or impossible to measure externally in a geometrically complex structure such as the foot and ankle. It has been used to improve our understanding of pathomechanics and to evaluate proposed treatments for several disorders, including progressive collapsing foot deformity, ankle arthritis, syndesmotic injury, ankle fracture, plantar fasciitis, diabetic foot ulceration, hallux valgus, and lesser toe deformities. Parameters calculated from finite-element models have been widely used to make predictions about their biomechanical correlates.

Modified Ni-Nail and C-Nail systems for intra-articular fractures of the calcaneus: A biomechancial study

OBJECTIVES

We have proposed a novel intramedullary nail (Ni-Nail) by incorporating a sustentaculum tali screw to improve the fixation stability of minimally invasive treatment for calcaneal fractures. This study aimed to evaluate the biomechanical characters of the Ni-Nail system and compare it with traditional C-Nail system.

METHODS

A finite element model of a Sanders type-IIIAB calcaneal fracture was reconstructed and fixed using two intramedullary nail systems, which was validated by a cadaver study. A vertical loading of 700 N was applied to the subtalar joint surfaces, and 525 N Achilles tendon tension was applied to the superior border of the Achilles tuberosity. The von Mises stresses and fracture displacements of both fixation models were evaluated.

RESULTS

The maximum von Mises stress of the screws of Ni-Nail and C-Nail were 27.92 MPa and 57.42 MPa, respectively, while that of the main nail were 67.44 MPa and 53.01 MPa. In addition, the maximum fracture displacement of the Ni-Nail was larger than that of C-Nail by 15.6% (0.37 mm vs.0.32 mm).

CONCLUSIONS

Our static simulation analysis showed that both Ni-Nail and C-Nail demonstrated similar biomechanical stability for calcaneal fixation. The Ni-Nail features a simple structure that is easier to operate and less traumatizing. Future studies may consider to further evaluate the clinical effectiveness by clinical trials and follow-ups.

Biomechanical comparison among five mid/hindfoot arthrodeses procedures in treating flatfoot using a musculoskeletal multibody driven finite element model

BACKGROUND AND OBJECTIVE

Mid/hindfoot arthrodesis could modify the misalignment of adult-acquired flatfoot and attenuate pain. However, the long-term biomechanical effects of these surgical procedures remain unclear, and the quantitative evidence is scarce. Therefore, we aimed to investigate and quantify the influences of five mid/hindfoot arthrodeses on the internal foot biomechanics during walking stance.

METHODS

A young participant with flexible flatfoot was recruited for this study. We reconstructed a subject-specific musculoskeletal multibody driven-finite element (FE) foot model based on the foot magnetic resonance imaging. The severe flatfoot model was developed from the flexible flatfoot through the attenuation of ligaments and the unloading of the posterior tibial muscle. The five mid/hindfoot arthrodeses simulations (subtalar, talonavicular, calcaneocuboid, double, and triple arthrodeses) and a control condition (no arthrodesis) were performed simultaneously in the detailed foot multibody dynamics model and FE model. Muscle forces calculated by a detailed multi-segment foot model and ground reaction force were used to drive the foot FE model. The internal foot loadings were compared among control and these arthrodeses conditions at the first and second vertical ground reaction force (VGRF) peak and VGRF valley instants.

RESULTS

The results indicated that the navicular heights in double and triple arthrodeses were higher than other surgical procedures, while the subtalar arthrodesis had the smallest values. Five mid/hindfoot arthrodeses reduced the peak plantar fascia stress compared to control. However, double and triple arthrodeses increased the peak medial cuneo-navicular joint contact pressures and peak foot pressures as well as the metatarsal bones stresses.

CONCLUSION

Although mid/hindfoot arthrodesis generally reduced the collapse of medial longitudinal arch and plantar fascia loading during the stance phase, the increased loading in the adjacent unfused joint and metatarsal bones for double and triple arthrodeses should be noted. These findings could account for some symptoms experienced by flatfoot patients after surgery, which may facilitate the optimization of surgical protocols.

Finite Element Analysis of Generalized Ligament Laxity on the Deterioration of Hallux Valgus Deformity (Bunion)

Hallux valgus is a common foot problem affecting nearly one in every four adults. Generalized ligament laxity was proposed as the intrinsic cause or risk factor toward the development of the deformity which was difficult to be investigated by cohort clinical trials. Herein, we aimed to evaluate the isolated influence of generalized ligament laxity on the deterioration using computer simulation (finite element analysis). We reconstructed a computational foot model from a mild hallux valgus participant and conducted a gait analysis to drive the simulation of walking. Through parametric analysis, the stiffness of the ligaments was impoverished at different degrees to resemble different levels of generalized ligament laxity. Our simulation study reported that generalized ligament laxity deteriorated hallux valgus by impairing the load-bearing capacity of the first metatarsal, inducing higher deforming force, moment and malalignment at the first metatarsophalangeal joint. Besides, the deforming moment formed a deteriorating vicious cycle between hallux valgus and forefoot abduction and may result in secondary foot problems, such as flatfoot. However, the metatarsocuneiform joint did not show a worsening trend possibly due to the overriding forefoot abduction. Controlling the deforming load shall be prioritized over the correction of angles to mitigate deterioration or recurrence after surgery.