Determination of linezolid and its achiral impurities using sweeping preconcentration by micellar capillary electrophoresis

Enantioseparation of linezolid and tedizolid using validated high-performance liquid chromatographic method

This paper reports the separation of two chiral antibacterial agents namely, linezolid and tedizolid using a validated high-performance liquid chromatographic method. In the current work, glycopeptide-based chiral column, CHIROBIOTIC® V2 (5-μm particle size, L × I.D. 25 cm × 4.6 mm) was employed with a mobile phase containing methanol and 0.15% aq. trifluoracetic acid (75:25%, v/v) in isocratic elution approach at flow rate of 1 ml min^-1 . The separation condition was customized (in terms of resolution values and retention times) was carried out by changing the content of the mobile phase, column temperature, flow rate, and so on. Results showed that the chromatographic separation was achieved within 15 min and average resolution values were 4.6 and 4.8 for tedizolid and linezolid, respectively. The detection limit values were 14.85 and 14.16 ng ml^-1 , respectively, for tedizolid enantiomers. Further, validation of separation parameters was performed by considering the international conference on harmonization guidelines, and ultimately, the mechanism of chiral recognition was also established.

A critical review of HPLC-based analytical methods for quantification of Linezolid

Linezolid is a synthetic antimicrobial agent belonging to the oxazolidinone class. Since its approval in the year 2000 until now, linezolid remains the main representative drug for the oxazolidinone class of drugs, which is used in therapy due to its unique mode of action, which involves inhibition of protein synthesis. As linezolid holds great importance in antimicrobial therapy, it is necessary to compile the various analytical methods that have been reported in the literature for its analysis. Analytical techniques used for pharmaceutical analyses and therapeutic drug monitoring play an important role in comprehending the aspects regarding bioavailability, bioequivalence, and therapeutic monitoring during patient follow-ups. Even though linezolid has had the approval for clinical use for more than 18 years now, most of the analytical methods for its determination reported in the scientific literature are the ones which utilize HPLC. Therefore, the present review provides a summary of the HPLC-based methods used in the determination and quantification of linezolid in different matrices since the time of its discovery.

Linezolid-A Review of Analytical Methods in Pharmaceuticals and Biological Matrices

Bacterial resistance to antibiotics is a growing phenomenon in the world. Considering the relevance of antimicrobials for population and the reduction in the registration of new antimicrobials by regulatory agencies, proper quality control is required to minimize the spread of bacterial resistance and ensure the effectiveness of a treatment, as well as safety for the patient. The recent addition to the antimicrobial world is the oxazolidinone classes of antibiotics, especially useful to treat infections caused by Gram-positive bacteria. Eperezolid and linezolid (LIN) are the two members of the oxazolidinone class of antibiotics. LIN was the first oxazolidinone approved by the Food and Drug Administration. The present review focuses on the analytical methods for the assessment of LIN in pharmaceuticals and biological matrices. The critical validation parameters like the linearity, limit of detection, limit of quantification are discussed for the individual method. Also the critical quality attributes like the sensitivity and the sample preparation techniques for bioanalytical methods are also discussed. Furthermore, some future trends that can be incorporated in the determination of similar drugs are also suggested.

Physicochemical Compatibility and Stability of Linezolid with Parenteral Nutrition

Patients referred to intensive care units (ICU) require special care due to their life-threatening condition, diseases and, frequently, malnutrition. Critically ill patients manifest a range of typical physiological changes caused by predominantly catabolic reactions in the body. It is necessary to provide the patients with proper nutrition, for example by administering total parenteral nutrition (TPN). The addition of linezolid to TPN mixtures for patients treated for linezolid-sensitive infections may reduce the extent of vascular access handling, resulting in a diminished risk of unwanted catheter-related infections. The compatibility and stability studies were conducted of linezolid in parenteral nutrition mixtures of basic, high- and low-electrolytic, high- and low-energetic and immunomodulatory composition. Mixtures containing linezolid were stored at 4–6 °C and 25 °C with light protection and at 25 °C without light protection for 168 h. In order to evaluate changes in the concentration of linezolid a previously validated reversed-phase HPLC method with UV detection was used. It was found that linezolid was stable at 4–6 °C in the whole course of the study whereas at 25 °C it proved stable over a period of 24 h required for administration of parenteral nutrition mixtures. The TPN mixtures demonstrated compatibility with linezolid and suitable stability, which were not affected by time or storage conditions.

Application of spectroscopic methods (FT-IR, Raman, ECD and NMR) in studies of identification and optical purity of radezolid

In the presented study, N-{[(5S)-3-(2-fluoro-4'-{[(1H-1,2,3-triazol-5-ylmethyl)amino]methyl}biphenyl-4-yl)-2-oxo-1,3-oxazolidin-5-yl]methyl}acetamide (radezolid) was synthesized and characterized using FT-IR, Raman, ECD and NMR. The aim of this work was to assess the possibility of applying classical spectral methods such as FT-IR, Raman, ECD and NMR spectroscopy for studies on the identification and optical purity of radezolid. The experimental interpretation of FT-IR and Raman spectra of radezolid was conducted in combination with theoretical studies. Density functional theory (DFT) with the B3LYP hybrid functional was used for obtaining radezolid spectra. Full identification was carried out by COSY, ¹H {¹³C} HSQC and ¹H {¹³C} HMBC experiments. The experimental NMR chemical shifts and spin-spin coupling constants were compared with theoretical calculations using the DFT method and B3LYP functional employing the 6-311++G(d,p) basis set and the solvent polarizable continuum model (PCM). The experimental ECD spectra of synthesized radezolid were compared with experimental spectra of the reference standard of radezolid. Theoretical calculations enabled us to conduct HOMO and LUMO analysis and molecular electrostatic potential maps were used to determine the active sites of microbiologically active form of radezolid enantiomer. The relationship between results of ab initio calculations and knowledge about chemical-biological properties of S-radezolid and other oxazolidinone derivatives are also discussed.

Development of new reference material neohesperidin for quality control of dietary supplements

BACKGROUND

Neohesperidin is an important natural flavanone glycoside distributed in several citrus species. This compound is widely used as a raw material for food additives in the food industry. The request for certified reference materials (CRMs) in dietary supplements was stipulated by the National Administrative Committee for CRMs and was underpinned by the need to improve the accuracy and comparability of measurement data and to establish metrological traceability of analytical results.

RESULTS

This paper reports the sample preparation methodology, homogeneity and stability studies, value assignment and uncertainty estimation of a new certified reference material of neohesperidin (GBW09522). Differential scanning calorimetry, coulometric titration and mass balance methods proved to be sufficiently reliable and accurate for certification purposes. The certified value of neohesperidin CRM is 994 g kg(-1) with an expanded uncertainty of 4 g kg(-1) (k = 2). The reference material described above was homogeneous and stable for 12 months at a storage temperature of 25 °C.

CONCLUSION

The new CRM of neohesperidin can be used to validate analytical methods and improve the accuracy of measurement data as well as quality control of neohesperidin-related dietary supplements, foods, traditional herbs and pharmaceutical formulations.

Two and three way spectrophotometric-assisted multivariate determination of linezolid in the presence of its alkaline and oxidative degradation products and application to pharmaceutical formulation

Linezolid (LIN) is determined in the presence of its alkaline (ALK) and oxidative (OXD) degradation products without preliminary separation based on ultraviolet spectrophotometry using two-way chemometric methods; principal component regression (PCR) and partial least-squares (PLS), and three-way chemometric methods; parallel factor analysis (PARAFAC) and multi-way partial least squares (N-PLS). A training set of mixtures containing LIN, ALK and OXD; was prepared in the concentration ranges of 12-18, 2.4-3.6 and 1.2-1.8 μg mL(-1), respectively according to a multilevel multifactor experimental design. The multivariate calibrations were obtained by measuring the zero-order absorbance from 220 to 320 nm using the training set. The validation of the multivariate methods was realized by analyzing their synthetic mixtures. The capabilities of the chemometric analysis methods for the analysis of real samples were evaluated by determination of LIN in its pharmaceutical preparation with satisfactory results. The accuracy of the methods, evaluated through the root mean square error of prediction (RMSEP), was 0.058, 0.026, 0.101 and 0.026 for LIN using PCR, PLS, PARAFAC and N-PLS, respectively. Protolytic equilibria of LIN and its degradation products were evaluated using the corresponding absorption spectra-pH data obtained with PARAFAC. The obtained pKa values of LIN, ALK and OXD are 5.70, 8.90 and 6.15, respectively. The results obtained were statistically compared to that of a reported HPLC method, and there was no significant difference between the proposed methods and the reported method regarding both accuracy and precision.

Determination of phthalic acid esters in Chinese white spirit using dispersive liquid-liquid microextraction coupled with sweeping β-cyclodextrin-modified micellar electrokinetic chromatography

A simple method that consumes low organic solvent is proposed for the analysis of phthalic acid esters in Chinese white spirit using dispersive liquid-liquid microextraction coupled with sweeping-micellar electrokinetic chromatography. Tetrachloromethane and white-spirit-containing ethanol were used as the extraction and dispersing solvents, respectively. The electrophoresis separation buffer was composed of 5 mM β-cyclodextrin, 50 mM sodium dodecyl sulfate and 25 mM borate buffer (pH 9.2) with 9% acetonitrile, enabling the baseline resolution of the analytes within 13 min. Under the optimum conditions, satisfactory linearities (5-1000 ng/mL, r ≥ 0.9909), good reproducibility (RSD ≤ 6.7% for peak area, and RSD ≤ 2.8% for migration time), low detection limits (0.4-0.8 ng/mL) and acceptable recovery rates (89.6-105.7%) were obtained. The proposed method was successfully applied to 22 Chinese white spirits, and the content of dibutyl phthalate in 55% of the samples exceeded the Specific Migration Limit of 0.3 mg/kg established by the domestic and international regulations.

Study on interaction between palladium(ІІ)-Linezolid chelate with eosin by resonance Rayleigh scattering, second order of scattering and frequency doubling scattering methods using Taguchi orthogonal array design

Linezolid reacted with palladium to form 1:1 binary cationic chelate which further reacted with eosin dye to form 1:1 ternary ion association complex at pH 4 of Walpole's acetate buffer in the presence of methyl cellulose. As a result not only absorption spectra were changed but Resonance Rayleigh Scattering (RRS), Second-order Scattering (SOS) and Frequency Doubling Scattering (FDS) intensities were greatly enhanced. The analytical wavelengths of RRS, SOS and FDS (λex/λem) of ternary complex were located at 538 nm/538nm, 240 nm/480 nm and 660 nm/330 nm, respectively. The linearity range for RRS, SOS and FDS methods were 0.01-0.5 μg mL(-1), 0.1-2 μg mL(-1) and 0.2-1.8 μg mL(-1), respectively. The sensitivity order of three methods was as RRS>SOS>FDS. Accuracy of all methods were determined by recovery studies and showed recovery between 98% and 102%. Intraday and inter day precision were checked for all methods and %RSD was found to be less than 2 for all methods. The effects of foreign substances were tested on RRS method and it showed the method had good selectivity. For optimization of process parameter, Taguchi orthogonal array design L8(2(4)) was used and ANOVA was adopted to determine the statistically significant control factors that affect the scattering intensities of methods. The reaction mechanism, composition of ternary ion association complex and reasons for scattering intensity enhancement was discussed in this work.

Spectrofluorimetric determination of terbinafine hydrochloride and linezolid in their dosage forms and human plasma

A highly sensitive, simple and rapid spectrofluorimetric method was developed for the determination of Terbinafine HCl (TRH) and linezolid (LNZ) in their pharmaceutical formulations. The proposed method is based on measuring the native fluorescence of the studied drugs in water at 336 nm after excitation at 275 nm for TRH and 375 nm after excitation at 254 nm for LNZ. The fluorescence-concentration plots were rectilinear over the range of 0.02-0.15 μg/mL for TRH and 0.5-5.0 μg/mL for LNZ. With lower detection limits of 3.0 and 110.0 ng/mL and a lower quantification limit of 9.0 and 320.0 ng/mL for TRH and LNZ, respectively. The method was successfully applied to the analysis of TRH in its commercial tablets, cream, gel and spray formulations and the results were in good agreement with those obtained with the official method. In addition the method was also applied to the analysis of LNZ in its capsule and I.V solution and the results were in good agreement with those obtained with the comparison method. The effect of sensitizers was studied. The method was extended to the determination of the studied drugs in spiked human plasma and the results were satisfactory.

A new approach for antibiotic drugs determination in human plasma by liquid chromatography-mass spectrometry

Sensitive and selective analytical procedures based on high performance liquid chromatography with mass spectrometric detection were developed for the determination of linezolid (LIN) and amoxicillin (AMOX) in human plasma samples. Samples were prepared by applying protein precipitation (PP), solid phase extraction (SPE), and microextraction in packed syringe (MEPS). The analytical separation was carried out using reversed phase liquid chromatography in isocratic mode. All analytes were monitored by mass spectrometry (MS) detection in the product ion mode and the method was validated covering the corresponding therapeutic range of 1-30 μg/mL and 1-50 μg/mL for LIN and AMOX respectively. The assay was linear over AMOX and LIN concentration ranges. The method provided good validation data: accuracy (102.9% (LIN), 100.9% (AMOX)), limit of detection (0.1407 ng/mL (LIN); 0.1341 ng/mL (AMOX); quantification (0.3814 ng/mL (LIN), 0.4249 ng/mL (AMOX)) and acceptable stability within 24h in the auto-sampler. Three different methods were compared as regards precision, accuracy, recovery and matrix effects. The proposed methods offer a fast and simple way to determine selected antibiotic drugs in human plasma that could be applied in pharmacokinetic studies.

A validated stability-indicating LC method for the separation of enantiomer and potential impurities of Linezolid using polar organic mode

Although a number of methods are available for evaluating Linezolid and its possible impurities, a common method for separation if its potential impurities, degradants and enantiomer in a single method with good efficiency remain unavailable. With the objective of developing an advanced method with shorter runtimes, a simple, precise, accurate stability-indicating LC method was developed for the determination of purity of Linezolid drug substance and drug products in bulk samples and pharmaceutical dosage forms in the presence of its impurities and degradation products. This method is capable of separating all the related substances of Linezolid along with the chiral impurity. This method can also be used for the estimation of assay of Linezolid in drug substance as well as in drug product. The method was developed using Chiralpak IA (250 mm×4.6 mm, 5 μm) column. A mixture of acetonitrile, ethanol, n-butyl amine and trifluoro acetic acid in 96:4:0.10:0.16 (v/v/v/v) ratio was used as a mobile phase. The eluted compounds were monitored at 254 nm. Linezolid was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. The degradation products were well resolved from main peak and its impurities, proving the stability-indicating power of the method. The developed method was validated as per International Conference on Harmonization (ICH) guidelines with respect to specificity, limit of detection, limit of quantification, precision, linearity, accuracy, robustness and system suitability.

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2008-2010)

Capillary electrophoresis has been alive for over two decades now; yet, its sensitivity is still regarded as being inferior to that of more traditional methods of separation such as HPLC. As such, it is unsurprising that overcoming this issue still generates much scientific interest. This review continues to update this series of reviews, first published in Electrophoresis in 2007, with an update published in 2009 and covers material published through to June 2010. It includes developments in the fields of stacking, covering all methods from field-amplified sample stacking and large volume sample stacking, through to ITP, dynamic pH junction and sweeping. Attention is also given to on-line or in-line extraction methods that have been used for electrophoresis.

Assay and stability-indicating micellar electrokinetic chromatography method for the simultaneous determination of valacyclovir, acyclovir and their major impurity guanine in pharmaceutical formulations

A micellar electrokinetic chromatography (MEKC) method for the simultaneous determination of the antiviral drugs acyclovir and valacyclovir and their major impurity, guanine, was developed. The influences of several factors (surfactant and buffer concentration, pH, applied voltage, capillary temperature and injection time) were studied. Using tyramine hydrochloride as internal standard, the analytes were all separated in about 4 min. The separation was carried out in reversed polarity mode at 28 degrees C, 25 kV and using hydrodynamic injection (15 s). The separation was effected in a fused-silica capillary 100 microm x 56 cm and a background electrolyte of 20 mM citric acid-1 M Tris solution (pH 2.75), containing 125 mM sodium dodecyl sulphate and detection at 254 nm. The method was validated with respect to linearity, limit of detection and quantification, accuracy, precision and selectivity. Calibration curves were linear over the range 0.1-1 microg/mL (guanine) and from 0.1 to 120 microg/mL for both valacyclovir and acyclovir. The relative standard deviations of intra- and inter-day migration times and corrected peak areas were less than 5.0%. The proposed method was successfully applied to the determination of the analytes in tablets and creams. From the previous study it is concluded that the stability-indicating method developed for acyclovir and valacyclovir can be used for analysis of the drug in various stability samples.

Recent advances in the methodology, optimisation and application of MEEKC

MEEKC is an electrodriven separation technique. Oil-in-water microemulsions (MEs) and to a lesser extent water-in-oil MEs have been used in MEEKC as BGEs to achieve separation of a diverse range of solutes. The more common (oil-in-water) MEs are composed of nanometre-sized droplets of oil suspended in an aqueous buffer. Interfacial tension between the oil and aqueous phase is reduced close to zero by the presence of a surfactant and a co-surfactant. MEEKC is capable of providing fast and efficient separations for a wide range of acidic, basic and neutral, water-soluble and -insoluble compounds. This review details the advances in MEEKC-based separations from the period 2006 to 2008. Areas covered include online sample concentration, chiral separation, suppressed electroosmosis MEEKC, MEEKC-MS, and the use of MEEKC in predicting migration behaviour and solute characteristics. A fundamental introduction to MEEKC, along with the presentation and discussion of recent applications is also included.

Sweeping and new on-line sample preconcentration techniques in capillary electrophoresis

Sweeping is a powerful on-line sample preconcentration technique that improves the concentration sensitivity of capillary electrophoresis (CE). This approach is designed to focus the analyte into narrow bands within the capillary, thereby increasing the sample volume that can be injected, without any loss of CE efficiency. It utilizes the interactions between an additive [i.e., a pseudostationary phase (PS) or complexing agent] in the separation buffer and the sample in a matrix that is devoid of the additive used. The accumulation occurs due to chromatographic partitioning, complexation or any interaction between analytes and the additive through electrophoresis. The extent of the preconcentration is dependent on the strength of interaction involved. Both charged and neutral analytes can be preconcentrated. Remarkable improvements--up to several thousandfold--in detection sensitivity have been achieved. This suggests that sweeping is a superior and general approach to on-line sample preconcentration in CE. The focusing mechanism of sweeping under different experimental conditions and its combination with other on-line preconcentration techniques are discussed in this review. The recently introduced techniques of transient trapping (tr-trapping) and analyte focusing by micelle collapse (AFMC) as well as other novel approaches to on-line sample preconcentration are also described.