Hydrophilic interaction chromatography (HILIC) in the analysis of antibiotics

Per aqueous liquid chromatography of Radix hedysari polysaccharides and Au nanoparticles co-functionalized stationary phase and its application in the determination of iridoids and phenylethanols

BACKGROUND

Hydrophilic Interaction Liquid Chromatography (HILIC) is an outstanding strategy for the challenging analysis of hydrophilic and polar components. Nevertheless, analysis under HILIC mode typically consumes 70%-95 % acetonitrile with the disadvantage of high analytical costs, being environmentally unfriendly and causing biohazards, which is not in line with the concept of green chromatography. Research has shown that Per Aqueous Liquid Chromatography (PALC) simultaneously emphasizes efficient analytical performance for hydrophilic analytes and green analytical concepts. The development of new PALC stationary phases with superior performance is necessary.

RESULTS

In this paper, silanized silica was sequentially subjected to esterification reaction, polymerization reaction and covalent bonding through five steps to obtain SiO2-RHP-AuNPs material, which was prepared as a novel stationary phase for PALC. Comprehensive characterization of the materials by means of Fourier transform infrared spectroscopy, Transmission scanning electron microscope, Elemental analysis and Thermogravimetric analysis showed the successful bonding of the functionalized groups on the original silica. The polymeric stationary phase based on Radix hedysari polysaccharide and Au nanoparticles had higher density of hydroxyl and ester functionalized groups. The Au nanoparticles upgraded their mesoporous structure and thermal stability, providing exceptional chromatographic performance and selectivity for chromatographic analysis. The influence of mobile phase water content, salt concentration, pH and column temperature on the retention behavior was evaluated. The novel Column was found to exhibit a dual mechanism of hydrophobic interactions/ion exchange interactions in a mobile phase with high water content.

SIGNIFICANCE AND NOVELTY

The separation efficiency and selectivity of SiO2-RHP-AuNPs columns for synthetic pigments and organic acids in PALC mode were superior to those of commercial HILIC and C18 columns. In addition, a method for the determination of seven active ingredients in Fructus Ligustri Lucidi by SiO2-RHP-AuNPs column in PALC mode was developed. The method had good stability, reproducibility and accuracy, which was capable of realizing the quality evaluation of Chinese Materia Medicas.

A quantitative method for the analysis of total and unbound concentrations of amoxicillin, ampicillin, ceftazidime, ceftriaxone, ertapenem, fosfomycin and penicillin G in human plasma with liquid chromatography-tandem mass spectrometry assay

Monitoring antibiotic plasma levels is critical in populations with altered pharmacokinetics, such as critically ill patients in neonatal or adult intensive care units. This study aimed to develop and validate a rapid, reproducible and sensitive liquid chromatography-tandem mass spectrometry assay (LC-MS/MS) for measuring total and unbound concentrations of amoxicillin, ampicillin, ceftazidime, ceftriaxone, ertapenem, fosfomycin and penicillin G in human plasma. The method required 20 and 250 μl sample volumes for measuring total and unbound concentrations, respectively. Sample preparation involved protein precipitation and the addition of an internal standard. Ultrafiltration separated unbound drugs. Method validation covered selectivity, carryover, linearity, accuracy, precision, dilution effects, matrix effects and stability. The LC-MS/MS was performed within a run time of 7.5 min. Calibration curves were linear for ceftazidime and ertapenem (ranges 0.1-50 and 0.05-100 mg/l, respectively) and quadratic for other analytes (0.1-50 mg/l, except for ampicillin: 0.1-20 mg/l; R2 > 0.990). Accuracy was within ±15% of the nominal concentration, and precision did not exceed ±15% (relative standard deviation). Samples showed no significant degradation at the tested temperatures and time points. Clinical applicability was demonstrated in a critically ill neonate. This method with minimal sample volume and short analysis time enables the measurement of total and unbound concentrations of selected antibiotics, and is suitable for routine clinical care and studies.

Understanding retention and intra-particle diffusivity of alkylsulfobetaine-bonded Ethylene Bridged Particles with different mesopore sizes for hydrophilic interaction liquid chromatography applications

The role of the average pore diameter (APD) of 1.7μm AtlantisTM Premier BEHTM Particles derivatized with a zwitterionic group (propylsulfobetaine) on the efficiency of their 2.1 × 50 mm hydrophilic interaction liquid chromatography (HILIC) packed columns is investigated experimentally. Van Deemter plots for toluene (neutral, hydrophobic), cytosine (neutral, polar), tosylate (negatively charged), bretylium and atenolol (positively charged) were measured on three HILIC columns packed with BEH Z-HILIC Particles having APDs of 95 Å, 130 Å, and 300 Å. The intraparticle diffusivities of the analytes across these three BEH Z-HILIC Particles were measured by the peak parking method. The experimental data reveal that the slope of the C-branch of the van Deemter plots can be reduced by factors of about 15 for toluene, 2.5 for cytosine, 6 for atenolol, 5 for tosylate, and 14 for bretylium with increasing the APD from 95 Å to 300 Å. This observation is explained by: (1) the reduced amount of the highly viscous water diffuse layer and subsequent increase of the amount of acetonitrile-rich eluent in the mesopores, (2) the localized electrostatic adsorption of the retained analytes onto the zwitterion-bonded BEH Particles, and (3) depletion/excess of the analytes into the water diffuse layer. A general model of intraparticle diffusivity was then proposed to account for the impact of the APD of Z-HILIC Particles on the solid-to-liquid mass transfer resistance of small molecules. The model highlights the relevance of the thickness of the water diffuse layer, the access of the bulk eluent into the mesopore, the localized electrostatic adsorption, and the partitioning constant of the retained analyte between the bulk eluent and the water diffuse layer.

Determination and Identification of Antibiotic Residues in Fruits Using Liquid Chromatography-High-Resolution Mass Spectrometry (LC-HRMS)

Antibiotic residues may be present in fruit products from trees that were treated to combat bacterial diseases such as citrus greening or blight. A liquid chromatography-high-resolution mass spectrometry (LC-HRMS) method was developed for the simultaneous determination and identification of streptomycin, kasugamycin, penicillin, and oxytetracycline residues in fruit. Samples were extracted with acidic methanol and separation was optimized for a hydrophilic interaction LC column. A Q-Exactive HRMS instrument was used to obtain product ion spectra for analyte identification. Quantitation was performed with matrix-extracted calibration curves and internal standard correction. The method was tested on many different types of fruit. In general, fortified samples demonstrated acceptable recoveries (82-116%) and reproducibility (<15% RSD). Method detection limits for these analytes were well below the established US EPA tolerance levels. It was also possible to analyze the fruit extracts prepared using this method for additional chemical contaminants using LC-HRMS.

Quartz Crystal Microbalance as a Holistic Detector for Quantifying Complex Organic Matrices during Liquid Chromatography: 2. Compound-Specific Isotope Analysis

In carbon-compound-specific isotope analysis (carbon CSIA) of environmental micropollutants, purification of samples is often required to guarantee accurate measurements of a target compound. A companion paper has brought forward an innovative approach to couple a quartz crystal microbalance (QCM) with high-performance liquid chromatography (HPLC) for the online quantification of matrices during a gradient HPLC purification. This work investigates the benefit for isotope analysis of polar micropollutants typically present in environmental samples. Here, we studied the impact of the natural organic matter (NOM) on the isotopic integrity of model analytes and the suitability of the NOM-to-analyte ratio as a proxy for the sample purity. We further investigated limitations and enhancement of HPLC purification using QCM on C18 and C8 phases for single and multiple targets. Strong isotopic shifts of up to 3.3% toward the isotopic signature of NOM were observed for samples with an NOM-to-analyte ratio ≥10. Thanks to QCM, optimization of matrix removal of up to 99.8% of NOM was possible for late-eluting compounds. The efficiency of HPLC purification deteriorated when aiming for simultaneous purification of two or three compounds, leading to up to 2.5% less NOM removal. Our results suggest that one optimized HPLC purification can be achieved through systematic screening of 3 to 5 different gradients, thereby leading to a shift of the boundaries of accurate carbon CSIA by up to 2 orders of magnitude toward lower micropollutant concentrations.

Quality Evaluation of Gentamicin Sulfate Reference Standards in Japanese Pharmacopoeia Using Hydrophilic Interaction Chromatography Combined With Tandem Mass Spectrometry

BACKGROUND

Through the recent development of analytical technology, antibiotics quantification in the Japanese Pharmacopoeia (JP) has changed from traditional microbiological assays to physicochemical methods with high specificity and precision. However, for several multicomponent antibiotics without typical UV absorption, potency cannot be directly determined using instrumental methods such as high-performance liquid chromatography; therefore, traditional microbiological assays are still used. Gentamicin sulfate (GmS), which consists of three major components, C1, C1a, and C2, is such a typical antibiotic, and its antimicrobial potency continues to be assayed using microbiological methods in JP monographs. Introduction of a physicochemical assay for GmS is needed to help ensure its quality and quantity.

OBJECTIVE

This study aimed to develop quality control measures for GmS that could be complementary to quantitative assays and purity tests specified in the JP.

METHODS

For each gentamicin C component (C1, C2, and C1a), theoretical potencies were determined based on the quantitative relationship between purity and potency, as measured by quantitative 1H NMR and microbiological assays, respectively. Two lots of the JP reference standard (RS) were used as test samples, with the contents of each component and impurity (sisomicin and garamine) being determined using hydrophilic interaction liquid chromatography-tandem mass spectrometry (HILIC-MS/MS).

RESULTS

The ratios of theoretical potency for C1, C2, and C1a were 1.00, 1.21, and 1.80, respectively. The potencies of the GmS JP RSs, which were estimated based on the contents and theoretical potency of each C component, corresponded well with those determined through microbiological assays. Marked differences in impurities (%) between the two RS lots were highlighted by quantifying sisomicin and garamine.

CONCLUSIONS

The developed analytical procedure enabled the characterization of two different JP RSs in terms of content ratio, potencies, and impurities.

HIGHLIGHTS

Novel analytical procedures useful for routine quality control of GmS were developed using HILIC-MS/MS.

Hierarchical Macroporous Agarose Materials with Polyethyleneimine-Assisted Multiple Boronate Affinity Binding Sites for the Separation of Neomycin

Quantification of neomycin residues in food samples demands an efficient purification platform. Herein, hierarchical macroporous agarose monoliths with multiple boronate affinity sites were established for selective separation of neomycin. The silica core was synthesized by "one-step" Stöber procedures followed by modification with amino group and incorporation of polyethyleneimine. A versatile macroporous agarose monolith was prepared by emulsification strategies and functionalized with epoxy groups. After introducing polyethyleneimine-integrated silica nanoparticles onto the agarose monolith, fluorophenylboronic acids were immobilized. The physical and chemical characteristics of the composite monolith were analyzed systematically. After optimization, neomycin showed high binding ability of 23.69 mg/g, and the binding capacity can be manipulated by changing the pH and adding monosaccharides. The composite monolith was subsequently utilized to purify neomycin from the spiked model aquatic products followed by high-performance liquid chromatography analysis, which revealed a remarkable neomycin purification effect, indicating the great potential in the separation of neomycin from complicated aquatic products.

In-Depth Performance Analysis and Comparison of Monolithic and Particulate Zwitterionic Hydrophilic Interaction Liquid Chromatography Polymer Columns

The kinetic performance of different zwitterionic hydrophilic interaction liquid chromatography polymer columns is evaluated and compared in-depth. For this purpose, two lab-made monolithic columns, synthesized with different crosslinkers, and a commercial particle packed column are considered. It is found that performance evaluation techniques, such as comparing plate height curves or fitted A-, B- and C-terms, obtained by fitting experimental plate height data to a plate height model, are complicated by the determination of a reliable characteristic length. This is due to the very different morphology of these column types, and the heterogeneity of the monolithic columns. The occurrence of a convective flow through the packed particle column further complicates the interpretation of the obtained fitting parameters, as part of the C-term is wrongfully attributed to the A-term. Therefore, the use of the kinetic plot method is suggested for the comparative evaluation of these columns, as kinetic plots do not require the determination of a characteristic length, nor rely on any fitting parameters. With the kinetic plot method, it is demonstrated that the lab-made monolithic columns outperform the packed particle column for plate counts between 10,000 and 800,000. This is attributed to the higher column efficiency of these columns, due to their small domain and skeleton sizes, and their high permeability, resulting from their high external porosity and the occasional occurrence of preferential flow paths.

Retention and mass transfer properties of the series of unbonded, amide-bonded, and alkylsulfobetaine-bonded ethylene bridged hybrid hydrophilic interaction liquid chromatography columns

This work investigates the link between the retentivity and the stationary phase to mobile phase mass transfer resistance of hydrophilic interaction liquid chromatography (HILIC) columns packed with the same base ethylene-bridged hybrid particles (BEH). The retention volumes, the plate heights, and the volume of the adsorbed water layer were measured for the ACQUITY^TM UPLC^TM BEH^TM 130 Å HILIC Column (unbonded BEH), ACQUITY UPLC BEH 130 Å Amide Column (amide group attached), and Atlantis^TM Premier BEH 95 Å Z-HILIC (zwitterionic group attached) Column. The method of Guo (toluene retention volumes in pure acetonitrile and in the HILIC eluent) was validated from the UNIFAC group-contribution method and applied to measure accurately the water layer volumes in these columns. A strong correlation was found between the retention volumes of most neutral polar analytes and the volume of the water layer adsorbed in the HILIC column. The fraction of the pore volume occupied by the water layer increases significantly from the BEH HILIC Column to the BEH Amide Column, and to the BEH Z-HILIC Column. This is explained by the water solvation of the attached ligands in the pore volume of the BEH Particles and to the smaller average mesopore size of the BEH Z-HILIC Particles. A second and strong correlation is also observed between the water content in the HILIC particle and the stationary phase to mobile phase mass transfer resistance of the HILIC columns at high mobile phase linear velocities. The measured intra-particle diffusivity normalized to the bulk diffusion coefficient decreased from 0.33 (BEH HILIC Column) to 0.10 (BEH Amide Column) and to only 0.03 (BEH Z-HILIC Column) for comparable retention of cytosine. These results are fully consistent with the higher viscosity of the internal eluent (higher water content) and higher internal obstruction for diffusion (smaller mesopores and internal porosity) in the BEH Z-HILIC Particles. Still, in gradient elution mode, the peak capacity was found to be 18% higher for the BEH Z-HILIC Column than that on the BEH Amide Column because the retention factors at elution were smaller when maintaining the same analysis time and starting eluent composition.

Hydrophilic interaction chromatography-type sorbent prepared by the modification of methacrylate-base resin with polyethyleneimine for solid-phase extraction of polar compounds

Hydrophilic interaction chromatography (HILIC)-type sorbents were newly developed for the solid-phase extraction (SPE) of polar compounds. Two methacrylate-base resins with different cross-linking monomers and pore properties were synthesized, and three polyethyleneimines (PEIs) with different molecular weights were modified onto each base resin. In both cases, PEIs with a molecular weight of 10,000 (PEI-10,000) exhibited the highest adsorption properties for polar compounds (uracil, uridine, adenosine, cytidine, and guanosine). To control the water-enriched layer at the surface of the PEI-10,000-modified sorbents, the additive amount of PEI-10,000 in the modified reaction was also optimized. When 10 times the amount of PEI-10,000 to each base resin was added, an improvement in adsorption property was observed. Moreover, the use of a nonaqueous sample solution (100% acetonitrile) during the sample loading process drastically improved adsorption, especially for uracil (about 80%) and adenosine (100%). These results indicate that the formation of a strong water-enriched layer at the surface of sorbents with an effective expression of hydrophilic interaction was an important factor in the adsorption properties of polar compounds in HILIC mode-SPE.

Segmented two-dimensional liquid chromatography. Proof of concept study

The separation in liquid chromatography is defined either by the space domain where it proceeds until the least retained analyte reaches the outlet of the column or by the time when individual analytes elute out of the column. These two approaches lead to the four possible combinations of two-dimensional liquid chromatography with online space x time coupling being the least experimentally feasible. Here, we show the development of a novel two-dimensional liquid chromatography method combining separation defined by space and the conventional elution-based separation. First-dimension column consisted of four capillary segments coupled serially via two-position six-port valves allowing an online and comprehensive transfer of analytes from the first to the second dimension. After initial experiments using homemade monolithic capillary columns, we tested commercially available columns in both dimensions. We ended with the combination of packed capillary columns in the first dimension and monolithic capillary column in the second dimension. We used a reversed-phase retention mechanism in the first spatial dimension, while HILIC was in the second, time-based dimension. We also developed a theoretical model to describe the proposed two-dimensional separation that was further confirmed by utilizing both an isocratic and gradient elution in the second dimension. Finally, we applied our experimental setup to separate neurotransmitters contained in human urine.

Targeted isolation of 1,1-diphenyl-2-picrylhydrazyl inhibitors from Saxifraga atrata and their antioxidant activities

Saxifraga atrata is an important traditional Tibetan medicine used to treat cough and pneumonia, and has tremendous medicinal potential. In this study, we devised a technique to separate 1,1-diphenyl-2-picrylhydrazyl inhibitors from a methanol extract of Saxifraga atrata. The material was first processed using MCI GEL® CHP20P medium-pressure liquid chromatography, yielding 1.1 g of the target fraction Fr2. Subsequently, online hydrophilic interaction liquid chromatography-1,1-diphenyl-2-picrylhydrazyl assay was used to identify prospective 1,1-diphenyl-2-picrylhydrazyl inhibitors, and two 1,1-diphenyl-2-picrylhydrazyl inhibitor fractions (Fr24 and Fr25) were identified from Fr2. Then, medium-pressure preparation was continued using an XIon column to separate two 1,1-diphenyl-2-picrylhydrazyl inhibitor fractions (Fr24 and Fr25). The target compound was concentrated in fractions Fr24 and Fr25 using reverse-phase liquid chromatography during further separation procedures. Finally, the purity, structure, and 1,1-diphenyl-2-picrylhydrazyl inhibitory activity of the isolated 1,1-diphenyl-2-picrylhydrazyl inhibitors were determined. Two 1,1-diphenyl-2-picrylhydrazyl inhibitors (adenosine with the half maximal inhibitory concentration of 66.87 ± 14.33 μM and (-)-4-O-(E)-Caffeoyl-L-threonic acid with the half maximal inhibitory concentration of 59.06 ± 5.02 μM) were isolated with purities exceeding 95%. The results showed that this technology is effective in the targeted separation of antioxidants from natural products. This article is protected by copyright. All rights reserved.

Graph Convolutional Networks for Improved Prediction and Interpretability of Chromatographic Retention Data

Machine learning is a popular technique to predict the retention times of molecules based on descriptors. Descriptors and associated labels (e.g., retention times) of a set of molecules can be used to train a machine learning algorithm. However, descriptors are fixed molecular features which are not necessarily optimized for the given machine learning problem (e.g., to predict retention times). Recent advances in molecular machine learning make use of so-called graph convolutional networks (GCNs) to learn molecular representations from atoms and their bonds to adjacent atoms to optimize the molecular representation for the given problem. In this study, two GCNs were implemented to predict the retention times of molecules for three different chromatographic data sets and compared to seven benchmarks (including two state-of-the art machine learning models). Additionally, saliency maps were computed from trained GCNs to better interpret the importance of certain molecular sub-structures in the data sets. Based on the overall observations of this study, the GCNs performed better than all benchmarks, either significantly outperforming them (5-25% lower mean absolute error) or performing similar to them (<5% difference). Saliency maps revealed a significant difference in molecular sub-structures that are important for predictions of different chromatographic data sets (reversed-phase liquid chromatography vs hydrophilic interaction liquid chromatography).

HRMS Detector for the New HILIC CBD Method Development in Hemp Seed Oil

The cannabis analysis has gained new importance worldwide due to the rapid expansion of the hemp global market. Many reverse phase high performance liquid chromatography (HPLC) methods have been developed to analyze cannabidiol (CBD) and its analogues due to the nice fit with their log P values at around 6. However, when CBD was blended with hemp seed oil in consumer, cosmetic, and food industries, the high content of triacylglycerides (TAGs) from hemp seed oil were retained and accumulated inside C₁₈ columns with the common mobile phases and caused a column pressure increase and ghost peaks after continuous sample injections. Coupled with the chemical profile from high resolution mass spectrometry (HRMS) detection, a novel hydrophilic interaction liquid chromatography (HILIC) CBD quantitation method was developed, specifically for CBD blended hemp seed oil materials, which can overcome the matrix buildup in reverse phase columns. The zwitterionic (ZIC)-cHILIC column containing a dense water layer on the stationary phase surface provided a stable partitioning separation mechanism to separate the CBD from TAGs in hemp seed oil. This water layer favors the sustaining NH₄F buffer ions, which can maximize the salting-out action and help reduce the adsorptive interaction between TAGs and stationary phase sulfobetaine materials. The high percentage of acetonitrile (99%) contributed to method sensitivity and reduced instrument maintenance time. The method was developed and validated for the first time. It has been successfully applied to quantify CBD content in hemp seed oil samples, thus demonstrating it to be a useful tool for both quality control and safety assurance in CBD hemp seed oil raw materials and related products.

Exploring miniaturized sample preparation approaches combined with LC-QToF-MS for the analysis of sulfonamide antibiotic residues in meat- and/or egg-based baby foods

Miniaturized and simplified sample preparation methods with reduced consumption of chemicals and non-halogenated solvents are presented for the determination of 12 sulfonamides in baby foods. Hydrophilic interaction liquid chromatography coupled to quadrupole time-of-flight mass spectrometry was used for the identification and quantification of the compounds based on the acquisition of full spectrum at high resolution with accurate mass for precursor and its fragment ions. Three miniaturized protocols based on QuEChERS, salting-out assisted liquid-liquid extraction or low-temperature cleanup were evaluated regarding the extraction efficiency and removal capability of matrix co-extractives. All approaches achieved satisfactory recoveries (70.0-120.0%); however, the miniaturized QuEChERS distinguished by lower co-extractives content in the final extract providing lower matrix effects. Thus, the performance characteristics of the miniaturized QuEChERS were established using different matrices: beef-, egg yolk- and vegetable-based baby food or chicken- and vegetable-based baby food, in compliance with the Codex Alimentarius Commission guidelines. The target compounds were investigated in 30 commercial baby foods.

Mixed-Mode Hydrophilic Interactions/Reversed-Phase Retention Mechanism in Thin-Layer Chromatography

We investigated the dual retention mechanism in thin-layer chromatography taking place on three stationary phases of different polarity (C-18, plain silica gel and DIOL) and using binary mobile phases composed of acetonitrile as the main component and water, or methanol as a modifier. As the test analytes, we selected a set of 12 compounds of pharmaceutical importance and considerably different chemical structure, i.e. the imidazoline and serotonin receptor ligands, and their related compounds. Retention of each analyte in each investigated chromatographic system was determined in a wide enough range of the mobile phase composition, with volume fraction of the mobile phase modifier ranging from 0.10 to 0.90. Calculation of the exact turning point values as a proof of occurrence of the reversed-phase hydrophilic interaction chromatography (HILIC/RP) retention mechanism was based on the multimodal retention model. The dual retention mode was described with the use of the volume fraction of the mobile phase modifier, the total polarity and the total solubility models. For the DIOL, C-18 and silica gel stationary phase, the dual (HILIC/RP) retention mechanism was confirmed. In the case of the DIOL stationary phase and acetonitrile/methanol mobile phase, the observed retention mechanism was more complicated than the dual HILIC/RP one.

Hydrophilic Interaction Liquid Chromatography (HILIC): Latest Applications in the Pharmaceutical Researches

Background:

Significant advances have been occurred in analytical research since the 1970s by Liquid Chromatography (LC) as the separation method. Reverse Phase Liquid Chromatography (RPLC) method, using hydrophobic stationary phases and polar mobile phases, is the most commonly used chromatographic method. However, it is difficult to analyze some polar compounds with this method. Another separation method is the Normal Phase Liquid Chromatography (NPLC), which involves polar stationary phases with organic eluents. NPLC presents low-efficiency separations and asymmetric chromatographic peak shapes when analyzing polar compounds. Hydrophilic Interaction Liquid Chromatography (HILIC) is an interesting and promising alternative method for the analysis of polar compounds. HILIC is defined as a separation method that combines stationary phases used in the NPLC method and mobile phases used in the RPLC method. HILIC can be successfully applied to all types of liquid chromatographic separations such as pharmaceutical compounds, small molecules, metabolites, drugs of abuse, carbohydrates, toxins, oligosaccharides, peptides, amino acids and proteins.

Objective:

This paper provides a general overview of the recent application of HILIC in the pharmaceutical research in the different sample matrices such as pharmaceutical dosage form, plasma, serum, environmental samples, animal origin samples, plant origin samples, etc. Also, this review focuses on the most recent and selected papers in the drug research from 2009 to the submission date in 2020, dealing with the analysis of different components using HILIC.

Results and Conclusion:

The literature survey showed that HILIC applications are increasing every year in pharmaceutical research. It was found that HILIC allows simultaneous analysis of many compounds using different detectors.

Surface properties of stationary phases with embedded polar group based on secondary interaction, zeta potential measurement and linear solvatation energy relationship studies

The chromatographic properties of six non-commercially available stationary phases with ester or phosphodiester functional groups embedded into alkyl chain were studied. Zeta potential values of stationary phases suspended in water, organic solvent and their mixtures were measured. Moreover, the selectivity coefficients were calculated on the basis of the retention factor for the test solutes. Separations were performed under hydrophilic interaction liquid chromatographic conditions. Hydrophobic and polar properties of the investigated columns were compared. Based on the chromatographic properties, polar embedded packing materials were classified. Also two phases with different spacer but the same embedded polar group and alkyl chain (Amino-P-C18 and Diol-P-C18) were used for comparison with homemade materials. Amino-P-C18 stationary phase exhibits positive values of zeta potential which is in accordance with the observed anion exchange properties. The highest negative values of zeta potential were observed for Diol-P-C18, together with cation exchange properties. The highest methylene selectivity, polar selectivity and configurational selectivity were observed for the stationary phase with an ester bond and a phenyl group.

Hydrophilic interaction liquid chromatography method for eremomycin determination in pre-clinical study

A complex of hydrophilic interaction liquid chromatography (HILIC) methods for simple and efficient determination of eremomycin (ERM) as an active pharmaceutical ingredient (API) of a novel drug is proposed for preclinical study, which includes the dissolution test and pharmacokinetic study on the animals. A home-made HILIC silica-based stationary phase (SP) containing diol functionalities and positively charged nitrogen atoms in its structure was synthesized for this research and applied for the first time for performing the first step of preclinical study (dissolution test) of the novel ERM-containing drug. HILIC method developed using novel home-made SP allowed us to avoid any interferences from polyethylene glycol (PEG) contained in the drug matrix thus providing a unique advantage of the proposed approach over RP HPLC. The home-made SP demonstrated better chromatographic performance as compared to the tested commercially available columns with various functionalities. Different retention behaviour and mechanisms with various electrostatic impact were demonstrated for two glycopeptide antibiotics, namely, ERM and its analogue vancomycin (VAN), on the home-made SP. For the second step of the preclinical study HILIC-MS/MS method for ERM determination in rabbit plasma was developed and validated in accordance with the EMA requirements and successfully applied to the preclinical study on rabbits after intravenous and intraperitoneal drug administration. The results of dissolution test and pharmacokinetic study revealed similar in vitro solubility of ERM and VAN and low ERM bioavailability, which proved the potential safety and efficiency of the novel drug.

Development and Evaluation of HILIC-type Sorbents Modified with Hydrophilic Copolymers for Solid-phase Extraction

Hydrophilic interaction chromatography (HILIC) has attractive attention for the separation of water-soluble compounds via HPLC. There are, however, few studies on the pretreatment of the HILIC-type solid-phase extraction (SPE) due to the difficulty of obtaining the HILIC-type sorbent. Therefore, the development of HILIC-type sorbents for SPE is essential. In this study, four different hydrophilic copolymers, namely diallylamine-maleic acid copolymer (DAM), diallylamine-acrylamide copolymer (DAA), allylamine-maleic acid copolymer (MAM), and partly methylcarbonylated allylamine acetate copolymer (MAC), were immobilized on glycidyl methacrylate (GMA)-base resin, and their adsorptive properties were evaluated. The results of the physical and adsorptive properties indicated that a balance between the water content of the water-enriched layer on sorbent and the amount of hydrophilic copolymer immobilized on the GMA-base resin was vital for the adsorption in HILIC-type sorbent for SPE.

Simple spectrofluorimetric methods for determination of veterinary antibiotic drug (apramycin sulfate) in pharmaceutical preparations and milk samples

This work describes the development of highly sensitive as well as simple two spectrofluorimetric methods for the determination of apramycin sulfate. The first method depends on measuring the inherent native fluorescence of the aqueous neutral solution of the drug at 388 nm (λ_ex 335 nm). While the second method mainly based on enhancing the native fluorescence intensity of the drug using sodium dodecyl sulfate (SDS) micellar media by about 4 fold enhancement. The fluorescence intensity - concentration relationship for the two methods was found rectilinear over the concentration range 1.0-100.0 and 0.1-20.0 μg/mL for the first and second method respectively. The limit of detection for method I and II were 0.05 and 0.02 μg/mL respectively. The proposed methods can be effectively connected for the assurance of the medication without impedances from common normal excipients. Furthermore, the two methods were high sensitive enough for the assurance of the drug in spiked milk samples with high percentage recoveries.

Rapid determination of aminoglycosides in pharmaceutical preparations by electrospray ionization mass spectrometry

Aminoglycosides are broad-spectrum antibiotics often employed to combat Gram-negative bacterial infections. A technique based on electrospray-ionization mass spectrometry (ESI-MS) was developed for rapid determination of aminoglycosides. This method, which does not require prior chromatographic separation, or derivatization and extensive sample preparation steps, was deployed to estimate gentamicin, tobramycin, and amikacin in pharmaceutical formulations. Upon gas-phase collisional activation, protonated gentamicin, tobramycin, and amikacin undergo a facile loss of their respective “C” ring moiety to produce characteristic ions of m/z 322, 324, and 425, respectively. The mass spectral peak intensities for these specific product ions were monitored either by a flow-injection analysis selected-ion monitoring (FIA-SIM) time-intensity method or by a mass spectrometric internal-standard method. The linear dynamic ranges of detection for both methods were evaluated to be 10–1000 ng/mL for gentamicin, 25–2500 ng/mL for tobramycin, and 10–1000 ng/mL for amikacin. The internal-standard mass spectrometric method afforded lower intra-day and inter-day variations (2.3–3.0% RSD) compared to those from FIA-SIM method (4.5–5.0% RSD). This method was applied as a potential alternative procedure to determine gentamicin in commercial pharmaceutical samples and to monitor the release of gentamicin from “self-defensive” tannic acid-based layer-by-layer films into phosphate buffer solutions at different pHs.

An HPLC method for simultaneous quantification of sunitinib and its active metabolite, SU12662, using hydrophilic interaction chromatography principle

Aim: To develop a sensitive HPLC method for the quantitation of sunitinib (SU) and its active metabolite N-desethyl-sunitinib (SU12662) in human plasma. Materials & methods: The analytes were extracted from 500 μl of plasma using liquid–liquid extraction followed by protein precipitation. Chromatographic separation of two analytes and internal standard, vandetenib, was achieved on a hydrophilic interaction liquid chromatography analytical column using a gradient program. Calibration curves were linear over the range of 10–250 ng/ml for both SU and SU12662. The method was validated according to the US FDA guidelines for bioanalytical methods. Accuracy of the method at 10 ng/ml for SU and SU12662 was 8.7 and 6.7%, respectively, and precision was 10.18% and 17.3%, respectively. Conclusion: This method allows a specific, sensitive and reliable determination of SU and SU12662 in human plasma in a single analytical run which makes it useful for therapeutic drug monitoring.

Ready for TDM: Simultaneous quantification of amikacin, vancomycin and creatinine in human plasma employing ultra-performance liquid chromatography-tandem mass spectrometry

BACKGROUND

Amikacin (AMI) and vancomycin (VAN) are antibiotics largely used in intensive care in the empiric treatment of severe infections by multi-resistant gram-negative and gram-positive bacteria. AMI and VAN are eliminated untransformed by glomerular filtration, showing depuration ratio highly correlated with creatinine (CRE) clearance. AMI, VAN and CRE are highly polar structures, presenting poor retention in reversed-phase liquid chromatography when using conventional stationary phases.

OBJECTIVE

This study aimed to develop and validate a simple UPLC-MS/MS method for simultaneous determination of AMI, VAN, and CRE in human plasma for therapeutic drug monitoring.

RESULTS

Samples were prepared by protein precipitation, followed by dilution. Heptafluorobutyric acid (HFBA) was added to the mobile phase at low concentration (0.01%), and separation was performed in an ultra-performance reversed-phase column (particle diameter of 1.8 μm). These conditions allowed retention times of 0.92, 0.93, 2.12, 2.17 and 2.27 min for CRE, CRE-D3, AMI, KAN and VAN, respectively. The assay was linear from 0.5 to 100 mg L^-1 for AMI and VAN and 5 to 100 mg L^-1. Precision, accuracy and stability assays were acceptable according to bioanalytical validation guidelines. Suitable results. Matrix effects were in the range of +10.5 to +11.6% for AMI, -4.3 to -4.5% for VAN, and - 1.7 to +0.7 for CRE.

CONCLUSION

The first assay for the simultaneous determination of AMI, VAN and CRE in plasma by liquid chromatography-tandem mass spectrometry was reported. This assay allows the obtention of the necessary analytical data for the clinical application of population pharmacokinetic methods for therapeutic drug monitoring of AMI and VAN.

Hydrophilic-interaction planar chromatography in ultra-sensitive determination of α-aminocephalosporin antibiotics. Application to analysis of cefalexin in goat milk samples using modified QuEChERS extraction technique

A highly sensitive, selective and precise HPTLC method coupled with fluorescence detection was developed and validated for the determination of α-aminocephalosporin antibiotics; namely cefalexin, cefadroxil and cefradine in their standard solutions. The applicability of the developed methodology was demonstrated via analysis of cefalexin in goat milk samples. Full optimization of the fluorescence derivatization reaction was carried out with regard to the standard solutions of the studied compounds or after extraction of milk samples. The separation of the studied compounds was performed on HPTLC precoated silica gel plates 60 F₂₅₄ using acetonitrile: water in a ratio 85:15 (v/v) as a mobile phase. The retention behavior of the formed derivatives was discussed in detail. It was found that hydrophilic interaction mode is the main interaction mechanism governing the retention of the formed derivatives. In addition, an experimental design approach was conducted for optimization of the chromatographic conditions. Modified QuEChERS was applied as an efficient extraction technique of cefalexin from both spiked and real goat milk samples. Optimization of QuEChERS extraction technique to achieve the highest extraction recovery was performed and the results indicate that this method provides a good extraction recovery (83-116%) for cefalexin from goat milk samples. Limit of detection (LOD) of the developed method was found to be 0.023, 0.005, and 0.023 ng band^-1 for cefalexin, cefadroxil and cefradine, respectively in their standard solutions and 0.165 ng band^-1 for cefalexin in goat milk samples. According to the achieved LOD values, the method sensitivity was quasi-equivalent to other methods based on expensive techniques such as HPLC-UV and HPLC-MS and it is sufficient to determine cefalexin below its MRL in milk samples. Moreover, the method was successfully applied to a pharmacokinetic study of cefalexin in goat milk after single intramuscular injection of 10 mg of cefalexin kg^-1 per body weight.

Sample as solid support in MSPD: A new possibility for determination of pharmaceuticals, personal care and degradation products in sewage sludge

A method based on matrix-solid phase dispersion (MSPD), focused on the principles of green analytical chemistry, aimed at the use of alternative solid supports and less toxic solvents, was developed for the simultaneous determination of 19 pharmaceuticals, 4 personal care products (PPCPs) and 4 degradation products in sewage sludge samples. Higher recoveries were achieved when 2 g sample was macerated for 5 min in a glass mortar, transferred to a centrifuge tube, and 1 min vortex agitation with 5 mL methanol. The performance of the method was evaluated through linearity, recovery, precision (intra-day), method detection and quantification limits (MDL and MQL) and matrix effect. The calibration curves prepared in methanol and in the matrix extract showed a correlation coefficient ranging from 0.98 to 0.99. MQL values ranged from 1.25 to 1250 ng g^-1. Recoveries between 50 and 120% were reached with RSDs lower than 20% for most compounds. The method presented low and medium matrix effects for most analytes. This method was successfully applied to real samples and of the 27 compounds determined, amitriptyline, carbamazepine, diclofenac, haloperidol, ketoconazole, miconazole, albendazole, mebendazole, thiabendazole, triclosan and triclocarban were detected in concentrations between 2.5 and 5400 ng g^-1.

Simultaneous analysis of spectinomycin, halquinol, zilpaterol, and melamine in feedingstuffs by ion-pair liquid chromatography-tandem mass spectrometry

A method for the simultaneous analysis of veterinary drug residues (spectinomycin, halquinol, and zilpaterol) and contaminants (melamine) in feedingstuffs by liquid chromatography-tandem mass spectrometry was developed. Method performance for all analytes was evaluated by reversed-phase liquid chromatography, reversed-phase with altered chemical equilibrium, and hydrophilic interaction (HILIC) as chromatographic modes. Validation was in accordance to Commission Decision 657/2002/CE, by considering the best chromatographic approach. Ion-pair liquid chromatography with C₁₈ as stationary phase led to the lowest random uncertainties, effective analyte separation and shorter time of analysis. Low precision deviations and good recovery rates were obtained and thus method reliability and sensitivity could be consolidated. Method applicability was evaluated by the analysis of samples of feedingstuffs, such as cattle, pig, and poultry feeds, feed ingredients of both animal and vegetable origins, and mineral feeds. Some samples showed quantifiable concentrations of halquinol and zilpaterol, reinforcing the importance of this new analytical control method.

Development of a LC-MS method for simultaneous determination of amoxicillin and metronidazole in human serum using hydrophilic interaction chromatography (HILIC)

A method was developed for the determination of amoxicillin and metronidazole in human serum. The procedure used was hydrophilic interaction chromatography (HILIC) followed by mass spectrometric (MS) detection. Chromatographic separation was achieved on a ZIC-HILIC column and the mobile phase consisted of a mixture of 0.1% (v/v) formic acid in water and 0.1% (v/v) formic acid in acetonitrile. The method was validated with regard to selectivity, accuracy, precision, calibration, lower limit of quantification (LOQ), extraction recovery and matrix effect. The LOQs were 0.0138 and 0.008 μg/ml for amoxicillin and metronidazole respectively, while for quantification purposes linearity was achieved in the range of 0.1 μg/ml to 6.4 μg/ml for both drugs with correlation coefficients >0.9990. The intraday precision (expressed as %RSD) and the accuracy (expressed as the % deviation from the nominal value) was <15% for both antibiotics at all QC levels. Extraction recoveries for both drugs and internal standards were >80%, while a considerable matrix effect (<60%) was observed for amoxicillin. Finally, the method was applied to the determination of amoxicillin and metronidazole concentrations in serum for 20 patients.

Chemometric-assisted method development in hydrophilic interaction liquid chromatography: A review

With an enormous growth in the application of hydrophilic interaction liquid chromatography (HILIC), there has also been significant progress in HILIC method development. HILIC is a chromatographic method that utilises hydro-organic mobile phases with a high organic content, and a hydrophilic stationary phase. It has been applied predominantly in the determination of small polar compounds. Theoretical studies in computer-aided modelling tools, most importantly the predictive, quantitative structure retention relationship (QSRR) modelling methods, have attracted the attention of researchers and these approaches greatly assist the method development process. This review focuses on the application of computer-aided modelling tools in understanding the retention mechanism, the classification of HILIC stationary phases, prediction of retention times in HILIC systems, optimisation of chromatographic conditions, and description of the interaction effects of the chromatographic factors in HILIC separations. Additionally, what has been achieved in the potential application of QSRR methodology in combination with experimental design philosophy in the optimisation of chromatographic separation conditions in the HILIC method development process is communicated. Developing robust predictive QSRR models will undoubtedly facilitate more application of this chromatographic mode in a broader variety of research areas, significantly minimising cost and time of the experimental work.

A fast and sensitive LC-MS/MS method for the quantification of fosfomycin in human urine and plasma using one sample preparation method and HILIC chromatography

Fosfomycin is an old antibiotic that is increasingly prescribed because of emergence of the antibiotic resistance and the growing incidence of multi-drug resistant infections. Surprisingly, little is known about its pharmacokinetics (PK) and the pharmacodynamics (PD). Quantification of fosfomycin in both urine and plasma provides insight into the PK/PD characteristics of fosfomycin, which is crucial for the optimization of the therapy and the prevention of the emergence of resistance. An analytical method is therefore needed for the quantification of fosfomycin in both urine and plasma. A fast and sensitive tandem mass spectrometry method in combination with HILIC chromatography for the quantification of fosfomycin with a universal sample preparation method for urine and plasma was developed and validated according to FDA guidelines. The universal sample preparation method only requires 100μL of a sample, the addition of the internal standard fosfomycin-13C₃ benzylamine and an ultrafiltration step. The method is applicable for the concentration range of 0.75-375mg/L (R² of 0.9998 in both matrices) encompassing the clinically relevant concentration range based on the susceptibility of possible (uro)pathogens in the clinical setting. The validation results for urine and plasma for all QC levels, were <2.1% and <3.2% for accuracy, <1.5% and <1.7% for within day precision and <5.0% and <3.8% for between day precision, respectively. No matrix effects were encountered and the total recovery in urine and plasma was high (102.5% and 99.4%). Prepared samples were stable at 4°C and 15°C for at least 72h and stored samples at -80°C were stable for at least 6 months. Selectivity and sensitivity were confirmed and no carry-over was observed. The method was successfully applied in two pharmacokinetic studies in healthy volunteers and patients respectively.

Simultaneous determination of nine β-lactam antibiotics in human plasma by an ultrafast hydrophilic-interaction chromatography-tandem mass spectrometry

Contemporary β-lactam antibiotic dosing is debatable in severely ill patients, since the occurrence of pathophysiological changes in critical illness can result in great inter-individual variability. Therapeutic drug monitoring (TDM) is a commonly used dosing strategy to optimize exposure and thereby minimize toxicity and maximize the efficacy. Currently, TDM of β-lactam antibiotics is rarely performed, due to poor availability in clinical practice. We describe an ultrafast Hydrophilic-Interaction Chromatography (HILIC) based UPLC-MS/MS method for the determination of amoxicillin, benzylpenicillin, cefotaxime, cefuroxime, ceftazidime, flucloxacillin, imipenem, meropenem and piperacillin in human plasma. This method involves simple sample preparation steps and was comprehensively validated according to standard FDA guidelines. For all analytes, mean accuracy and precision values were within the acceptance value. The lower and upper limits of quantification were found to be sufficient to cover the therapeutic range for all antibiotics. Finally, the method was successfully applied in a large pharmacokinetic study performed in the intensive care setting, and the feasibility of the analytical procedure was demonstrated in routine clinical practice. To the best of our knowledge, we report here the first HILIC-based UPLC-MS/MS assay for the determination of β-lactam antibiotics in human plasma. This simple, sensitive and ultrafast assay requires small-volume samples and can easily be implemented in clinical laboratories to promote the TDM of β-lactam antibiotics.

Surface plasmon resonance and molecular docking studies of bovine serum albumin interaction with neomycin: kinetic and thermodynamic analysis

Introduction: The interactions between biomacromolecules such as serum albumin (SA) and various drugs have attracted increasing research attention in recent years. However, the study of SA with those drugs that have relatively high hydrophilicity and a lower affinity for SA could be a challenging issue. At the present study, the interaction of bovine SA (BSA) with neomycin as a hydrophilic drug has been investigated using surface plasmon resonance (SPR) and molecular docking methods. Methods: BSA was immobilized on the carboxymethyl dextran hydrogel sensor chip after activation of carboxylic groups through NHS/EDC and, then, the neomycin interaction with BSA at different concentrations (1-128 µM) was investigated. Results: Dose-response sensorgrams of BSA upon increasing concentration of neomycin has been shown through SPR analysis. The small K_D value (4.96 e^-7 at 40°C) demonstrated high affinity of neomycin to BSA. Thermodynamic parameters were calculated through van't Hoff equation at 4 different temperatures. The results showed that neomycin interacts with BSA via Van der Waals interactions and hydrogen bonds and increase of K_D with temperature rising indicated that the binding process was entropy driven. Molecular docking study confirmed that hydrogen bond was the major intermolecular force stabilizing neomycin-BSA complex. Conclusion: The attained results showed that neomycin molecules can efficiently distribute within the body after interaction with BSA in spite of having hydrophilic properties. Besides, SPR can be considered as a useful instrument for study of the interaction of hydrophilic drugs with SA.

Polar silica-based stationary phases. Part II- Neutral silica stationary phases with surface bound maltose and sorbitol for hydrophilic interaction liquid chromatography

Two neutral polyhydroxylated silica bonded stationary phases, namely maltose-silica (MALT-silica) and sorbitol-silica (SOR-silica), have been introduced and chromatographically characterized in hydrophilic interaction liquid chromatography (HILIC) for a wide range of polar compounds. The bonding of the maltose and sorbitol to the silica surface was brought about by first converting bare silica to an epoxy-activated silica surface via reaction with γ-glycidoxypropyltrimethoxysilane (GPTMS) followed by attaching maltose and sorbitol to the epoxy surface in the presence of the Lewis acid catalyst BF₃.ethereate. Both silica based columns offered the expected retention characteristics usually encountered for neutral polar surface. The retention mechanism is majorly based on solute' differential partitioning between an organic rich hydro-organic mobile phase (e.g., ACN rich mobile phase) and an adsorbed water layer on the surface of the stationary phase although additional hydrogen bonding was also responsible in some cases for solute retention. The MALT-silica column proved to be more hydrophilic and offered higher retention, separation efficiency and resolution than the SOR-silica column among the tested polar solutes such as derivatized mono- and oligosaccharides, weak phenolic acids, cyclic nucleotide monophosphate and nucleotide-5'-monophosphates, and weak bases, e.g., nucleobases and nucleosides.