A novel strategy for dual-channel detection of metallothioneins and mercury based on the conformational switching of functional chimera aptamer

Target-promoted autocatalytic hairpin assembly of bivalent DNAzymes for sensitive and label-free electrochemical metallothionein assay

Metallothionein (MT) has shown to be an important biomarker for environmental monitoring and various diseases, due to its significant binding ability to heavy metal ions. On the basis of such a characteristic and the Hg2+-stabilized DNA duplex (Hg2+-dsDNA) probe, as well as a new autocatalytic hairpin assembly (aCHA)/DNAzyme cascaded signal enhancement strategy, the construction of a highly sensitive and label-free electrochemical MT biosensor is described. Target MT molecules bind Hg2+ in Hg2+-dsDNA to disrupt the duplex structure and to release ssDNA sequences, which trigger subsequent aCHA for efficient production of mimic aCHA triggering strands and many bivalent DNAzymes. The signal hairpins on the electrode are then cyclically cleaved by DNAzyme amplification cascade to liberate plenty G-quadruplex sequences, which bind hemin and yield largely enhanced currents for sensitive assay of MT with a detection limit of 0.217 nM in a label-free approach. Such sensor also shows selective discrimination capability to MT against other interfering proteins and assay of MT in normal serums with dilution has also been verified, indicating its potential for highly sensitive detection of different heavy metal ion binding molecules for various application scenarios.

Label-free fluorescence aptasensor for the detection of cadmium(II) ion based on the conformational switching of aptamer and thioflavine T

A simple label-free Cd2+ fluorescent aptasensor was proposed using aptamer as a recognition element and thioflavine T (ThT) as a signal reporter. The presence of Cd(II) can induce the conformational switching of the aptamer probe, accompanied by a change in fluorescence intensity. According to the difference in fluorescence signals before and after the addition of Cd2+, a fluorescence sensor for Cd2+ assay was established. Under the better experimental conditions, the sensor displayed a good linear range from 2 to 50 nM and the excellent detection limit was 0.8 nM. The method demonstrated high sensitivity and good selectivity. The aptasensor could detect Cd2+ in simulated water samples with satisfactory results. The proposed method had obvious advantages that was without chemical modification of fluorescent groups and complicated target preconcentration. It provided a new analytical platform for the detection of heavy metal ion pollution in environmental and biomedical fields.

Ag+-stabilized DNA triplex coupled with catalytic hairpin assembly and CRISPR/Cas12a amplifications for sensitive metallothionein assay

Metallothionein (MT) is a protein biomarker secreted by liver in response to the treatment for heavy metal toxicity and oncological diseases. On the basis of a new Ag+-stabilized DNA triplex probe (Ag+-SDTP), we establish a fluorescent biosensing system for high sensitivity detection of MT by combining catalytic hairpin assembly (CHA) and the CRISPR/Cas12a signal enhancements. The MT analyte complexes with Ag+ in Ag+-SDTP to disrupt the triplex structure and to release the ssDNA strands, which trigger subsequent CHA formation of many protospacer adjacent motif (PAM)-containing dsDNAs from two hairpins. Cas12a/crRNA further recognizes these PAM sequences to activate its trans-catalytic activity to cyclically cleave the fluorescently quenched ssDNA reporters to recovery drastically amplified fluorescence for detecting MT down to 0.34 nM within the dynamic range of 1∼800 nM. Moreover, the sensing method is able to selectively discriminate MT from other non-specific molecules and can realize low level detection of MT in diluted human serums, manifesting its potentiality for monitoring the disease-specific MT biomarker at trace levels.

A metal ion-coordinated DNA probe for sensitive fluorescence detection of metallothionein via a dual nucleic acid amplification strategy

Sensitively monitoring metallothionein (MT), a heavy metal-binding protein with substantial cysteine content, is of significance for evaluating heavy metal poisoning in both humans and animals. Based on a new metal ion-coordinated DNA probe and the heavy metal ion binding capability of MT, as well as the substantial signal enhancement of the hybridization chain reaction (HCR) and rolling circle amplification (RCA), we demonstrate a highly sensitive fluorescence MT detection assay. MT binds the metal ions in the hairpin structured, metal ion-coordinated DNA probe to switch its hairpin structure into ssDNA, which triggers subsequent RCA reactions and HCRs to open plenty of fluorescently quenched signal hairpins to exhibit drastically amplified fluorescence recovery for assaying MT down to 0.58 nM within a dynamic range of 1-320 nM. In addition, the investigation of low contents of MT in diluted human serum by such an assay has also been verified, indicating its promising application potential for diagnosing heavy metal poisoning.

Hybrid Nanoparticle/DNAzyme Electrochemical Biosensor for the Detection of Divalent Heavy Metal Ions and Cr3

A hybrid noble nanoparticle/DNAzyme electrochemical biosensor is proposed for the detection of Pb2+, Cd2+, and Cr3+. The sensor takes advantage of a well-studied material that is known for its selective interaction with heavy metal ions (i.e., DNAzymes), which is combined with metallic nanoparticles. The double-helix structure of DNAzymes is known to dissociate into smaller fragments in the presence of specific heavy metal ions; this results in a measurable change in device resistance due to the collapse of conductive inter-nanoparticle DNAzyme bridging. The paper discusses the effect of DNAzyme anchoring groups (i.e., thiol and amino functionalization groups) on device performance and reports on the successful detection of all three target ions in concentrations that are well below their maximum permitted levels in tap water. While the use of DNAzymes for the detection of lead in particular and, to some extent, cadmium has been studied extensively, this is one of the few reports on the successful detection of chromium (III) via a sensor incorporating DNAzymes. The sensor showed great potential for its future integration in autonomous and remote sensing systems due to its low power characteristics, simple and cost-effective fabrication, and easy automation and measurement.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

DNAzyme-based biosensors for mercury (Ⅱ) detection: Rational construction, advances and perspectives

Mercury contamination is one of the most severe issues in society due to its threats to public health and the ecological system. However, traditional methods for mercury ion detection are still limited by their time-consuming procedures, requirement of expensive instruments, and low selectivity. In recent decades, tremendous progress has been made in the development of functional nucleic acid-based, especially DNAzyme sensors for mercury (Ⅱ) (Hg²⁺) determination, including RNA-cleaving DNAzymes and G-quadruplex-based DNAzymes in particular. Researchers have heavily studied the construction of Hg²⁺ sensors, mainly originating from in vitro selection-derived DNAzymes, by incorporating T-Hg²⁺-T recognition moieties in existing DNAzyme scaffolds, and interfacing Hg²⁺-sensitive sequences with nanomaterials. In the last case, the employment of materials (as quenchers, signal transducers and DNA immobilizers) enriches the application scenarios of current Hg²⁺-DNAzymes, due to a combination of their functions. We summarize a broad range of sensing approaches, including optical, electrochemical, and other sensing methods, and compare their features. This review elaborates on the rational design strategies for engineering DNAzymes to selectively sense Hg²⁺, critically discusses their properties in different application scenarios, and summarizes recent advances in this field. Additionally, current progress, challenges and future perspectives are also discussed. This minireview provides deeper insights into the chemistry of these functional nucleic acids when working with Hg²⁺, explains the design ideas of DNAzyme-sensors in each platform, and reveals potential opportunities in developing more advanced DNAzyme sensors for the highly selective and sensitive recognition of Hg²⁺. ENVIRONMENTAL IMPLICATION: Mercury is one of the most toxic metallic contaminants due to its high toxicity, non-biodegradability, and serious human health risks when accumulated in the body. In the recent decade, intensive studies have focused on exploring mercury sensors by combining DNAzymes with various sensing methods, paving a promising avenue to gain ultra-high sensitivity and selectivity. However, so far, no review has introduced the recent advances on DNAzyme-based sensors for mercury detection in a critical way. In this review, we comprehensively summarized the studies on DNAzyme-based sensors for mercury detection using various sensing techniques including optical, electrochemical and other sensing methods.

Alginate-based magnetic nanosorbent immobilized with aptamer for selective and high adsorption of Hg2+ in water samples

Alginate-coated magnetic nanocluster (MNC) immobilized with Hg²⁺-specific aptamer was synthesized to obtain the nanosorbent with high adsorption capacity and high selectivity for trace analysis of inorganic mercury (Hg²⁺) in water samples. Magnetite nanoparticle was first synthesized by a co-precipitation of iron precursors in the presence of alginate to obtain alginate-coated MNC, followed by immobilization with avidin. Hg²⁺-Specific DNA aptamer labeled with biotin was then conjugated on the MNC surface via specific avidin-biotin interaction to form aptamer-immobilized MNC. Coating the MNC with alginate can improve its water dispersibility and also increase its adsorption capacity toward Hg²⁺ (350 mg/g). It exhibited high selectivity through thymine-Hg²⁺-thymine (T-Hg²⁺-T) interaction with high tolerance to other foreign ions. This nanosorbent showed linearity over the Hg²⁺ concentration range of 0.2-10 μg/L with a correlation coefficient of 0.9977, limit of detection of 0.46 μg/L, and enrichment factor of 13. Moreover, it also showed a potential for detection of Hg²⁺ in drinking and tap water samples with satisfactory recoveries.

Bioanalytical Application of Peroxidase-Mimicking DNAzymes: Status and Challenges

DNAzymes with peroxidase-mimicking activity are a new class of catalytically active DNA molecules. This system is formed as a complex of hemin and a G-quadruplex structure created by oligonucleotides rich in guanine. Considering catalytic activity, this DNAzyme mimics horseradish peroxidase, the enzyme most commonly used for signal generation in bioassays. Because DNAzymes exhibit many advantages over protein enzymes (thermal stability, easy and cheap synthesis and purification) they can successfully replace HRP in bioanalytical applications. HRP-like DNAzymes have been applied in the detection of several DNA sequences. Many amplification techniques have been conjugated with DNAzyme systems, resulting in ultrasensitive bioassays. On the other hand, the combination of aptamers and DNAzymes has led to the development of aptazymes for specific targets. An up-to-date summary of the most interesting DNAzyme-based assays is presented here. The elaborated systems can be used in medical diagnosis or chemical and biological studies.

An Ultrasensitive Colorimetric Strategy for Detection of Cadmium Based on the Peroxidase-like Activity of G-Quadruplex-Cd(II) Specific Aptamer

We rationally designed an ultrasensitive and label-free sensing platform for determination of cadmium (Cd). The sensing platform contains G-quadruplex-Cd(II) specific aptamer (GCDSA) constructed by incorporating G-rich sequence at the end of 5' and the critical domain of the Cd-4 aptamer. GCDSA designed act as both a special recognition sequence for Cd²⁺ and a signal DNAzyme. In absence of Cd²⁺, GCDSA may mainly exist in a random coil sequence. Upon addition of Cd²⁺, GCDSA could probably be induced to fold into a G-quadruplex structure. The generation of plentiful active G-quadruplex interacts with hemin to form a peroxidase-like DNAzyme, leading to increased absorbance signal of the sensing system. ΔA was directly proportional to the two segments of concentrations for Cd²⁺, with the detection of limit of 0.15 nM. The proposed method avoids the labeled oligonucleotides and allows directly quantitative analysis of the samples by cheap instruments, with an excellent dynamic range.

Protamine-gold nanoclusters as peroxidase mimics and the selective enhancement of their activity by mercury ions for highly sensitive colorimetric assay of Hg(II)

We certify that protamine-gold nanoclusters (PRT-AuNCs) synthesized by one-pot method exhibit peroxidase-like activity. The catalytic activity of PRT-AuNCs followed typical Michaelis-Menten kinetics and exhibited higher affinity to 3,3',5,5'-tetramethylbenzidine (TMB) as the substrate compared to that of natural horseradish peroxidase. Meanwhile, we found that Hg(II) could dramatically and selectively enhance the peroxidase-like activity of PRT-AuNCs, and the enhanced mechanism by Hg(II) was demonstrated to be generation of the cationic Au species and the partly oxidized Au species (Au^δ+) by Hg²⁺-Au⁰/Au⁺ interaction. Based on this finding, quantitative determinations of Hg(II) via visual observation and absorption spectra were achieved. The proposed strategy displays high selectivity that arises from the strong aurophilic interaction of mercury towards gold. Moreover, the developed method is highly sensitive with a wide linear range and low detection limit of 1.16 nM. This strategy is not only helpful to develop effective nanomaterials-based artificial enzyme mimics but also irradiative to discover new applications of artificial mimic enzymes in bio-detection, medical diagnostics, and biotechnology. Graphical abstract Protamine-gold nanoclusters (PRT-AuNCs) synthesized by one-pot method exhibit peroxidase-like activity. Hg(II) can stimulate the peroxidase-like activity of PRT-AuNCs selectively, enhancing their ability to catalyze the chromogenic reaction of TMB by H₂O₂.

A dual-signal amplification strategy for kanamycin based on ordered mesoporous carbon-chitosan/gold nanoparticles-streptavidin and ferrocene labelled DNA

An ultrasensitive electrochemical aptasensor for kanamycin (KAN) detection was constructed with a dual-signal amplification strategy. The aptasensor achieved greatly amplified sensitivity due to the excellent electrical conductivity of the ordered mesoporous carbon-chitosan (OMC-CS)/gold nanoparticles-streptavidin (AuNPs-SA) and DNA2 labelled with ferrocene (Fc-DNA2). The AuNPs-SA was used to immobilize the DNA strand (biotin labelled) with the biotin-streptavidin system. The DNA2 strand containing the KAN aptamer was labelled with ferrocene to increase the current signal on the electrode surface when bound to KAN. Some factors that affect the performance of the aptasensor were optimized, and the proposed aptasensor provided a wide linear range from 1 × 10^-10 M to 4 × 10^-6 M, with a detection limit as low as 35.69 pM for KAN under the optimized conditions. This aptasensor had satisfactory electrochemical performance with good stability, sensitivity and reproducibility. Additionally, it also displayed a good specificity for KAN without interference from competitive analogues. Furthermore, the constructed aptasensor was successfully used to detect KAN in a real milk sample. The proposed method for KAN detection has great potential for the detection of other antibiotics.

Optical and Electrochemical Aptasensors for Sensitive Detection of Streptomycin in Blood Serum and Milk

Detection and quantitation of antibiotic residues in blood serum and foodstuffs are in great demand. We have developed aptasensors for detection of streptomycin using electrochemical and optical methods. In the first method, an electrochemical aptasensor was developed for sensitive and selective detection of streptomycin, based on combination of exonuclease I (Exo I), complementary strand of aptamer (CS), arch shaped structure of aptamer (Apt)-CS conjugate, and gold electrode. The designed electrochemical aptasensor exhibited high selectivity toward streptomycin with a limit of detection (LOD) as low as 11.4 nM. Moreover, the developed electrochemical aptasensor was successfully used to detect streptomycin in milk and serum with LODs of 14.1 and 15.3 nM, respectively. In the second method, fluorescence quenching and colorimetric aptasensors were designed for detection of streptomycin based on aqueous gold nanoparticles (AuNPs) and double-stranded DNA (dsDNA). In the absence of streptomycin, aptamer/FAM-labeled complementary strand dsDNA is stable, resulting in the aggregation of AuNPs by salt bridge and an obvious color change from red to blue and strong emission of fluorescence. The colorimetric and fluorescence quenching aptasensors showed excellent selectivity toward streptomycin with limit of detections as low as 73.1 and 47.6 nM, respectively. The presented aptasensors were successfully used to detect streptomycin in milk and serum. For serum, LODs were determined to be 58.2 and 102.4 nM for fluorescence quenching and colorimetric aptasensors, respectively. For milk, LODs were calculated to be 56.2 and 108.7 nM for fluorescence quenching and colorimetric aptasensors, respectively.

Ultrasensitive detection of Ag(I) based on the conformational switching of a multifunctional aptamer probe induced by silver(I)

We for the first time confirmed that the low concentrations of Ag(I) could induce a silver specific aptamer probe (SAP) from a random coil sequence form to G-quadruplex structure. Thereby, a novel highly sensitive fluorescence strategy for silver(I) assay was established. The designed multifunctional SAP could act as a recognition element for Ag(I) and a signal reporter. The use of such a SAP can ultrasensitively and selectively detect Ag(I), giving a detection limit down to 0.64nM. This is much lower than those reported by related literatures. This strategy has been applied successfully for the detection of Ag(I) in real samples, further proving its reliability. Taken together, the designed SAP is not only a useful recognition and signal probe for silver, but also gives a platform to study the interaction of monovalent cations with DNA.

Mixed Self-Assembled Aptamer and Newly Designed Zwitterionic Peptide as Antifouling Biosensing Interface for Electrochemical Detection of alpha-Fetoprotein

A sensitive and low-fouling aptasensor for alpha-fetoprotein (AFP) was developed based on mixed self-assembled aptamers and newly designed zwitterionic peptides, where densely immobilized peptides formed an antifouling layer to resist nonspecific protein adsorption, and sparsely attached aptamers acted as the recognizing layer to achieve target binding. The obtained biosensing interface responded to the target AFP with a strikingly selective and sensitive manner, exhibited excellent protein-resistant performance even in complex human serum solution, and showed promising feasibility for the quantitative analysis of AFP in real human serum samples.

A novel aptamer-based DNA diamond nanostructure for in vivo targeted delivery of epirubicin to cancer cells

The clinical administration of epirubicin (Epi) in the treatment of cancer has been restricted, owing to its cardiotoxicity.

A novel electrochemical aptasensor based on arch-shape structure of aptamer-complimentary strand conjugate and exonuclease I for sensitive detection of streptomycin

Detection and quantitation of antibiotic residues in blood serum and animal foodstuffs are of great significance. In this study, an electrochemical aptasensor was developed for sensitive and selective detection of streptomycin, based on exonuclease I (Exo I), complimentary strand of aptamer (CS), Arch-shape structure of aptamer (Apt)-CS conjugate and gold electrode. The designed aptasensor inherits characteristics of gold including large surface area and high electrochemical conductivity, as well as high sensitivity and selectivity of aptamer toward its target, property of Arch-shape structure of Apt-CS conjugate to act as a gate and barrier for the access of redox probe to the surface of electrode and the function of Exo I as an enzyme which selectively digests the 3'-end of single stranded DNA (ssDNA). In the absence of streptomycin the gate remains closed. Thus, the electrochemical signal is weak. Upon addition of streptomycin, the Apt leaves the CS and binds to streptomycin and the Arch-shape structure is disassembled. Then, Exo I addition leads to a strong electrochemical signal. The designed electrochemical aptasensor exhibited high selectivity toward streptomycin with a limit of detection (LOD) as low as 11.4nM. Moreover, the developed electrochemical aptasensor was successfully used to detect streptomycin in milk and serum with LODs of 14.1 and 15.3nM, respectively.

Dual-channel detection of metallothioneins and mercury based on a mercury-mediated aptamer beacon using thymidine-mercury-thymidine complex as a quencher

A novel dual-channel strategy for the detection of metallothioneins (MTs) and Hg(2+) has been developed based on a mercury-mediated aptamer beacon (MAB) using thymidine-mercury-thymidine complex as a quencher for the first time. In the presence of Hg(2+), the T-rich oligonucleotide with a 6-carboxyfluorescein (TRO-FAM) can form an aptamer beacon via the formation of T-Hg(2+)-T base pairs, which results in a fluorescence quenching of the sensing system owing to the fluorescence resonance energy transfer (FRET) from the fluorophore of FAM to the terminated T-Hg(2+)-T base pair. The addition of MTs into this solution leads to the disruption of the T-Hg(2+)-T complex, resulting in an increase of the fluorescent signal of the system. In the optimizing condition, ΔF was directly proportional to the concentrations ranging from 5.63 nM to 0.275 μM for MTs, and 14.2 nM to 0.30 μM for Hg(2+) with the detection limits of 1.69 nM and 4.28 nM, respectively. The proposed dual-channel method avoids the label steps of a quencher in common molecular beacon strategies, without tedious procedure or the requirement of sophisticated equipment, and is rapid, inexpensive and sensitive.

A novel electrochemical aptasensor based on single-walled carbon nanotubes, gold electrode and complimentary strand of aptamer for ultrasensitive detection of cocaine

Cocaine is a strong central nervous system stimulant and one of the most commonly abused drugs. In this study, an electrochemical aptasensor was designed for sensitive and selective detection of cocaine, based on single-walled carbon nanotubes (SWNTs), gold electrode and complimentary strand of aptamer (CS). This electrochemical aptasensor inherits properties of SWNTs and gold such as large surface area and high electrochemical conductivity, as well as high affinity and selectivity of aptamer toward its target and the stronger interaction of SWNTs with single-stranded DNA (ssDNA) than double-stranded DNA (dsDNA). In the absence of cocaine, a little amount of SWNTs bind to Aptamer-CS-modified electrode, so that the electrochemical signal is weak. In the presence of cocaine, aptamer binds to cocaine, leaves the surface of electrode. So that, a large amount of SWNTs bind to CS-modified electrode, generating to a strong electrochemical signal. The designed electrochemical aptasensor showed good selectivity toward cocaine with a limit of detection (LOD) as low as 105 pM. Moreover, the fabricated electrochemical aptasensor was successfully applied to detect cocaine in serum with a LOD as low as 136 pM.

A novel colorimetric triple-helix molecular switch aptasensor based on peroxidase-like activity of gold nanoparticles for ultrasensitive detection of lead(ii)

Lead (Pb) is a serious environmental contaminant and one of the most toxic heavy metals.