Comparability study of Rituximab originator and follow-on biopharmaceutical

Impact of Excipient Extraction and Buffer Exchange on Recombinant Monoclonal Antibody Stability

The foundation of a biosimilar manufacturer's regulatory filing is the demonstration of analytical and functional similarity between the biosimilar product and the pertinent originator product. The excipients in the formulation may interfere with characterization using typical analytical and functional techniques during this biosimilarity exercise. Consequently, the producers of biosimilar products resort to buffer exchange to isolate the biotherapeutic protein from the drug product formulation. However, the impact that this isolation has on the product stability is not completely known. This study aims to elucidate the extent to which mAb isolation via ultrafiltration-diafiltration-based buffer exchange impacts mAb stability. It has been demonstrated that repeated extraction cycles do result in significant changes in higher-order structure (red-shift of 5.0 nm in fluorescence maxima of buffer exchanged samples) of the mAb and also an increase in formation of basic variants from 19.1 to 26.7% and from 32.3 to 36.9% in extracted innovator and biosimilar Tmab samples, respectively. It was also observed that under certain conditions of tertiary structure disruptions, Tmab could be restabilized depending on formulation composition. Thus, mAb isolation through extraction with buffer exchange impacts the product stability. Based on the observations reported in this paper, we recommend that biosimilar manufacturers take into consideration these effects of excipients on protein stability when performing biosimilarity assessments.

Recent advances in structural mass spectrometry methods in the context of biosimilarity assessment: from sequence heterogeneities to higher order structures

Biotherapeutics and their biosimilar versions have been flourishing in the biopharmaceutical market for several years. Structural and functional characterization is needed to achieve analytical biosimilarity through the assessment of critical quality attributes as required by regulatory authorities. The role of analytical strategies, particularly mass spectrometry-based methods, is pivotal to gathering valuable information for the in-depth characterization of biotherapeutics and biosimilarity assessment. Structural mass spectrometry methods (native MS, HDX-MS, top-down MS, etc.) provide information ranging from primary sequence assessment to higher order structure evaluation. This review focuses on recent developments and applications in structural mass spectrometry for biotherapeutic and biosimilar characterization.

Determination of plasma concentration of Belimumab by LC-MS/MS: Method development, validation, and clinical application

INTRODUCTION

Belimumab is a monoclonal antibody against B cell activating factor (BLyS). This monoclonal antibody (mAb) has been shown to be effective in reducing disease activity in patients with systemic lupus erythematosus (SLE). Belimumab is available in two forms as a lyophilized powder for intravenous (IV) use, or single-dose syringe for subcutaneous (SC) use. The aim of this study was to develop and validate a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for quantitation of belimumab in human serum.

MATERIAL AND METHODS

All analyses relied on nano-surface and molecular-orientation limited (nSMOL) proteolysis coupled with LC-MS/MS. Quantifications was performed in multiple reactions monitoring (MRM) mode, and electrospray ionization was conducted in positive mode.

RESULTS

Belimumab was quantified with signature peptide QAPGQGLEWMGGIPFGTAK and normalized using P14R. The total run time per assay was 10 min. Linearity was measured from 5 to 800 μg/mL (r² > 0.995). Accuracy and precision based on three quality control levels range from 11.2 - 9.51 % and 1.24 - 13.12 % respectively. The carryover was less than 7 %. In all, 87 patient samples were processed (65, IV; 22, SC). Mean concentration of belimumab was significantly higher for SC (93.0 ± 74.0 µg/mL) than for IV (67.4 ± 38.9 µg/mL) administration.

CONCLUSION

We have developed the first method of belimumab quantification combining LC-MS/MS and nSMOL proteolysis. It can be used for future clinical pharmacokinetic studies of belimumab and for investigating the relationship between belimumab concentration, efficacy, and toxicity in SLE patients.

Flow cytometry: A powerful analytical technique for characterizing the biological function of biotherapeutics and biosimilars

Biotherapeutics are complex molecules with therapeutic activity produced through biotechnology and/or genetic engineering. These medicines have clinical applications in diagnostic procedures and therapies for many disorders, including cancer, autoimmunity, and chronic degenerative diseases. Most biotherapeutics are expensive and sometimes unaffordable for low-income patients suffering from cancer or chronic illness. Biosimilars emerged in the 2000 s after patents of many innovative biotherapeutic products expired. The Biosimilar market is growing fast and demands reliable technologies for analyzing the physicochemical properties and bioactivity of products. A big challenge for biosimilar development is to prove comparable bioactivity, safety, efficacy, and toxicity profile as the innovator product. Bioactivity assessment can utilize different analytical techniques such as ELISA, flow cytometry, and surface plasmon resonance. Flow cytometry is a versatile analytical tool that can be used for the development of quantitative, reproducible, and accurate protocols suitable for routine evaluation of bioactivity in-vitro. Nevertheless, flow cytometry has been very scarcely used in comparability evaluation between biosimilar versus an originator product. Here, we review potential applications of flow cytometry to carry out functional bioassays of biotherapeutics or biosimilars.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2017-2018

This review is the tenth update of the original article published in 1999 on the application of matrix-assisted laser desorption/ionization mass spectrometry (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2018. Also included are papers that describe methods appropriate to glycan and glycoprotein analysis by MALDI, such as sample preparation techniques, even though the ionization method is not MALDI. Topics covered in the first part of the review include general aspects such as theory of the MALDI process, new methods, matrices, derivatization, MALDI imaging, fragmentation and the use of arrays. The second part of the review is devoted to applications to various structural types such as oligo- and poly-saccharides, glycoproteins, glycolipids, glycosides, and biopharmaceuticals. Most of the applications are presented in tabular form. The third part of the review covers medical and industrial applications of the technique, studies of enzyme reactions, and applications to chemical synthesis. The reported work shows increasing use of combined new techniques such as ion mobility and highlights the impact that MALDI imaging is having across a range of diciplines. MALDI is still an ideal technique for carbohydrate analysis and advancements in the technique and the range of applications continue steady progress.

Analytical Applications of Immobilized Enzyme Reactors (IMERs) Coupled to LC–MS/MS for Bottom- and Middle-Up Characterization of Proteins

Identification, monitoring, and, more importantly, linkage of critical quality attributes (CQAs) in processing parameters in a biopharmaceutical product is required to ensure the quality and manufacturing consistency of the product, but also its safety and efficacy during clinical and commercial development. Recently, bottom-up and middle-up liquid chromatography–mass spectrometry (LC–MS) characterization strategies using immobilized enzyme reactors (IMERs) in combination with multidimensional liquid chromatography coupled with high-resolution MS (MDLC–HRMS), as well as sophisticated software solutions, have been added to the analytical toolbox. These strategies not only allow faster characterization of post-translational modifications (PTMs) present in biotherapeutic proteins but also have the potential to provide a fully automated and unified bottom-up, middle-up, and intact LC–MS characterization approach.

Analytical Similarity Assessment of Biosimilars: Global Regulatory Landscape, Recent Studies and Major Advancements in Orthogonal Platforms

Biopharmaceuticals are one of the fastest-growing sectors in the biotechnology industry. Within the umbrella of biopharmaceuticals, the biosimilar segment is expanding with currently over 200 approved biosimilars, globally. The key step towards achieving a successful biosimilar approval is to establish analytical and clinical biosimilarity with the innovator. The objective of an analytical biosimilarity study is to demonstrate a highly similar profile with respect to variations in critical quality attributes (CQAs) of the biosimilar product, and these variations must lie within the range set by the innovator. This comprises a detailed comparative structural and functional characterization using appropriate, validated analytical methods to fingerprint the molecule and helps reduce the economic burden towards regulatory requirement of extensive preclinical/clinical similarity data, thus making biotechnological drugs more affordable. In the last decade, biosimilar manufacturing and associated regulations have become more established, leading to numerous approvals. Biosimilarity assessment exercises conducted towards approval are also published more frequently in the public domain. Consequently, some technical advancements in analytical sciences have also percolated to applications in analytical biosimilarity assessment. Keeping this in mind, this review aims at providing a holistic view of progresses in biosimilar analysis and approval. In this review, we have summarized the major developments in the global regulatory landscape with respect to biosimilar approvals and also catalogued biosimilarity assessment studies for recombinant DNA products available in the public domain. We have also covered recent advancements in analytical methods, orthogonal techniques, and platforms for biosimilar characterization, since 2015. The review specifically aims to serve as a comprehensive catalog for published biosimilarity assessment studies with details on analytical platform used and critical quality attributes (CQAs) covered for multiple biotherapeutic products. Through this compilation, the emergent evolution of techniques with respect to each CQA has also been charted and discussed. Lastly, the information resource of published biosimilarity assessment studies, created during literature search is anticipated to serve as a helpful reference for biopharmaceutical scientists and biosimilar developers.

Assessment of Functional Characterization and Comparability of Biotherapeutics: a Review

The development of monoclonal antibody (mAb) biosimilars is a complex process. The key to their successful development and commercialization is an in-depth understanding of the key product attributes that impact safety and efficacy and the strategies to control them. Functional assessment of mAb is a crucial part of the comparability of biopharmaceutical drugs. The development of a relevant and robust functional assay requires an interdisciplinary approach and sufficient flexibility to balance regulatory concerns as well as dynamics and variability during the manufacturing process. Although many advanced tools are available to study and compare the potency and bioactivity of the protein, most of these techniques suffer from major shortcomings that limit their routine use. These include the complexity of the task, establishment of the relevance of the chosen method with the mechanism of action (MOA) of the biosimilar, cost and extended time of analysis, and often the ambiguity in interpretation of the resulting data. To overcome or to address these challenges, the use of multiple orthogonal state-of-the-art techniques is a necessary prerequisite.

The First WHO International Standard for Harmonizing the Biological Activity of Bevacizumab

Several Bevacizumab products are approved for clinical use, with many others in late-stage clinical development worldwide. To aid the harmonization of potency assessment across different Bevacizumab products, the first World Health Organization (WHO) International Standard (IS) for Bevacizumab has been developed. Two preparations of a Bevacizumab candidate and comparator were assessed for their ability to neutralize and bind vascular endothelial growth factor (VEGF) using different bioassays and binding assays in an international collaborative study. Relative potency estimates were similar across different assays for the comparator or the duplicate-coded candidate sample. Variability in relative potency estimates was reduced when the candidate standard was used for calculation compared with various in-house reference standards, enabling harmonization in bioactivity evaluations. The results demonstrated that the candidate standard is suitable to serve as an IS for Bevacizumab, with assigned unitages for VEGF neutralization and VEGF binding activity. This standard coded 18/210 was established by the WHO Expert Committee on Biological Standardization, which is intended to support the calibration of secondary standards for product development and lifecycle management. The availability of IS 18/210 will help facilitate the global harmonization of potency evaluation to ensure patient access to Bevacizumab products with consistent safety, quality and efficacy.

Need for a risk-based control strategy for managing glycosylation profile for biosimilar products

INTRODUCTION

Monoclonal antibodies, though a popular class of therapeutics, are complex molecules that are manufactured using complex processes, making it nontrivial to maintain high level of batch-to-batch consistency in product quality. Glycosylation is a posttranslation modification that is widely considered a critical quality attribute (CQA) as its variations are known to impact the Fc effector functions of mAbs. With continuing rise of biosimilars, comparability of these products to the reference product with respect to glycosylation is a topic of immense interest.

AREAS COVERED

In this article, we focus on the various aspects related to this topic including criticality of the various glycosylated forms, as well as comparability of biosimilars with respect to glycosylation.

EXPERT OPINION

We propose that manufacturers should focus on those glycoforms that are present in larger amounts and are known to be critical with respect to the biotherapeutic's safety and efficacy. Such risk-based evaluation of glycoforms and their control would offer an optimal route to biosimilar manufacturers for a cost-effective approach toward product development without compromising on the safety and efficacy characteristics of the therapeutic. For mAbs lacking Fc effector function, devising stringent glycosylation control strategies can be bypassed, thereby simplifying process and product development.

ATR-FTIR spectroscopy and spectroscopic imaging for the analysis of biopharmaceuticals

Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) spectroscopy is a label-free, non-destructive technique that can be applied to a vast range of biological applications, from imaging cancer tissues and live cells, to determining protein content and protein secondary structure composition. This review summarises the recent advances in applications of ATR-FTIR spectroscopy to biopharmaceuticals, the application of this technique to biosimilars, and the current uses of FTIR spectroscopy in biopharmaceutical production. We discuss the use of ATR-FTIR spectroscopic imaging to investigate biopharmaceuticals, and finally, give an outlook on the possible future developments and applications of ATR-FTIR spectroscopy and spectroscopic imaging to this field. Throughout the review comparisons will be made between FTIR spectroscopy and alternative analytical techniques, and areas will be identified where FTIR spectroscopy could perhaps offer a better alternative in future studies. This review focuses on the most recent advances in the field of using ATR-FTIR spectroscopy and spectroscopic imaging to characterise and evaluate biopharmaceuticals, both in industrial and academic research based environments.

Functional analysis of glycosylation in Etanercept: Effects over potency and stability

Etanercept is a biotechnological product that has a complex glycosylation profile. To elucidate Etanercept glycosylation effect over biological activity and stability, we deglycosylated sequentially this molecule. Sequential deglycosylation was performed to understand which glycans are critical for Etanercept folding and activity. Extended study showed that gross glycosylation differences, affect thermal stability, hydrodynamic radius, pI, CDC, ADCC, protection against oxidation and charge surface exposition with any effect (within biological assay dispersion) over TNFα neutralization, indicating which glycoforms have a critical effect over Etanercept ADCC, CDC and stability. In this regard, complete remotion of sialic acids have a predominant importance over pI, ADCC, CDC and surface charge while N and O glycosylation over thermal stability, hydrophobicity, aggregation and protection against oxidation. Our research suggest that gross differences in the glycosylation profile are relevant for the stability and biological main activities of Etanercept, and that significant differences that affect the activities related to this fusion protein could be detected with proper analytical methods and stability studies.

Separation methods hyphenated to mass spectrometry for the characterization of the protein glycosylation at the intact level

Glycosylation is one of the most common post-translational modifications of proteins that affects their biological activity, solubility, and half-life. Therefore, its characterization is of great interest in proteomic, particularly from a diagnostic and therapeutic point of view. However, the number and type of glycosylation sites, the degree of site occupancy and the different possible structures of glycans can lead to a very large number of isoforms for a given protein, called glycoforms. The identification of these glycoforms constitutes an important analytical challenge. Indeed, to attempt to characterize all of them, it is necessary to develop efficient separation methods associated with a sensitive and informative detection mode, such as mass spectrometry (MS). Most analytical methods are based on bottom-up proteomics, which consists in the analysis of the protein at the glycopeptides level after its digestion. Even if this approach provides essential information, including the localization and composition of glycans on the protein, it is also characterized by a loss of information on macro-heterogeneity, i.e. the nature of the glycans present on a given glycoform. The analysis of glycoforms at the intact level can overcome this disadvantage. The aim of this review is to detail the state-of-the art of separation methods that can be easily hyphenated with MS for the characterization of protein glycosylation at the intact level. The different electrophoretic and chromatographic approaches are discussed in detail. The miniaturization of these separation methods is also discussed with their potential applications. While the first studies focused on the development and optimization of the separation step to achieve high resolution between isoforms, the recent ones are much more application-oriented, such as clinical diagnosis, quality control, and glycoprotein monitoring in formulations or biological samples.

In Vivo Glycan Engineering via the Mannosidase I Inhibitor (Kifunensine) Improves Efficacy of Rituximab Manufactured in Nicotiana benthamiana Plants

N-glycosylation has been shown to affect the pharmacokinetic properties of several classes of biologics, including monoclonal antibodies, blood factors, and lysosomal enzymes. In the last two decades, N-glycan engineering has been employed to achieve a N-glycosylation profile that is either more consistent or aligned with a specific improved activity (i.e., effector function or serum half-life). In particular, attention has focused on engineering processes in vivo or in vitro to alter the structure of the N-glycosylation of the Fc region of anti-cancer monoclonal antibodies in order to increase antibody-dependent cell-mediated cytotoxicity (ADCC). Here, we applied the mannosidase I inhibitor kifunensine to the Nicotiana benthamiana transient expression platform to produce an afucosylated anti-CD20 antibody (rituximab). We determined the optimal concentration of kifunensine used in the infiltration solution, 0.375 µM, which was sufficient to produce exclusively oligomannose glycoforms, at a concentration 14 times lower than previously published levels. The resulting afucosylated rituximab revealed a 14-fold increase in ADCC activity targeting the lymphoma cell line Wil2-S when compared with rituximab produced in the absence of kifunensine. When applied to the cost-effective and scalable N. benthamiana transient expression platform, the use of kifunensine allows simple in-process glycan engineering without the need for transgenic hosts.

Structural and functional comparability study of anti-CD20 monoclonal antibody with reference product

Background

Cell surface protein, CD20, is extensively expressed on the surface of B cells. Antibodies targeting CD20 protein are being used to treat B-cell malignancies and B-cell mediated autoimmune diseases. Considering the cost of therapy with innovator monoclonal antibodies for these diseases, development of biosimilar products for the treatment of such diseases provides affordable solution to rising healthcare costs.

Materials and Methods

Reference products of rituximab (six batches) were procured and stored as per manufacturer's instructions. Cell lines used in bioassay were procured from American Type Culture Collection and all other reagents used for analysis were of analytical grade. Primary structure was studied by intact mass analysis, peptide fingerprinting, peptide mass fingerprinting and sequence coverage analysis. Higher order structure was studied by circular dichroism, ultraviolet-visible spectroscopy, fluorescence spectroscopy, and disulfide bridge analysis. Different isoforms of reference product and SB-02 were identified using capillary isoelectric focusing and capillary zone electrophoresis. Glycosylation was studied by N-glycan mapping using LC-ESI-MS, point of glycosylation, released glycan analysis using ultra performance liquid chromatography (UPLC). Product related impurities such as oligomer content analysis and oxidized impurities were studied using size exclusion chromatography and reverse phase high performance liquid chromatography, respectively.

Results and Conclusion

Here, we report physicochemical and biological characterizations of Sun Pharma’s proposed biosimilar (SB-02) to rituximab, a monoclonal anti-CD20 antibody approved for the treatment of non-Hodgkin’s lymphoma and chronic lymphocytic leukemia. SB-02 and rituximab exhibited indistinguishable primary as well as higher-order structure upon analyzing with the array of analytical and extended characterization methods according to statistical methods. The molecule also displayed comparability to reference product in post-translational modifications and charge heterogeneity. In functional bioassays, SB-02 demonstrated comparable potency with respect to reference product. Our results indicate highly similar quality profile between SB-02 and rituximab.

CRISPR/Cas9-Multiplexed Editing of Chinese Hamster Ovary B4Gal-T1, 2, 3, and 4 Tailors N-Glycan Profiles of Therapeutics and Secreted Host Cell Proteins

In production of recombinant proteins for biopharmaceuticals, N-glycosylation is often important for protein efficacy and patient safety. IgG with agalactosylated (G0)-N-glycans can improve the activation of the lectin-binding complement system and be advantageous in the therapy of lupus and virus diseases. In this study, the authors aimed to engineer CHO-S cells for the production of proteins with G0-N-glycans by targeting B4Gal-T isoform genes with CRISPR/Cas9. Indel mutations in genes encoding B4Gal-T1, -T2, and -T3 with and without a disrupted B4Gal-T4 sequence resulted in only ≈1% galactosylated N-glycans on total secreted proteins of 3-4 clones per genotype. The authors revealed that B4Gal-T4 is not active in N-glycan galactosylation in CHO-S cells. In the triple-KO clones, transiently expressed erythropoietin (EPO) and rituximab harbored only ≈6% and ≈3% galactosylated N-glycans, respectively. However, simultaneous disruption of B4Gal-T1 and -T3 may decrease cell growth. Altogether, the authors present the advantage of analyzing total secreted protein N-glycans after disrupting galactosyltransferases, followed by expressing recombinant proteins in selected clones with desired N-glycan profiles at a later stage. Furthermore, the authors provide a cell platform that prevalently glycosylates proteins with G0-N-glycans to further study the impact of agalactosylation on different in vitro and in vivo functions of recombinant proteins.

Past, Present, and Future of Rituximab-The World's First Oncology Monoclonal Antibody Therapy

Rituximab is a chimeric mouse/human monoclonal antibody (mAb) therapy with binding specificity to CD20. It was the first therapeutic antibody approved for oncology patients and was the top-selling oncology drug for nearly a decade with sales reaching $8.58 billion in 2016. Since its initial approval in 1997, it has improved outcomes in all B-cell malignancies, including diffuse large B-cell lymphoma, follicular lymphoma, and chronic lymphocytic leukemia. Despite widespread use, most mechanistic data have been gathered from in vitro studies while the roles of the various response mechanisms in humans are still largely undetermined. Polymorphisms in Fc gamma receptor and complement protein genes have been implicated as potential predictors of differential response to rituximab, but have not yet shown sufficient influence to impact clinical decisions. Unlike most targeted therapies developed today, no known biomarkers to indicate target engagement/tumor response have been identified, aside from reduced tumor burden. The lack of companion biomarkers beyond CD20 itself has made it difficult to predict which patients will respond to any given anti-CD20 antibody. In the past decade, two new anti-CD20 antibodies have been approved: ofatumumab, which binds a distinct epitope of CD20, and obinutuzumab, a mAb derived from rituximab with modifications to the Fc portion and to its glycosylation. Both are fully humanized and have biological activity that is distinct from that of rituximab. In addition to these new anti-CD20 antibodies, another imminent change in targeted lymphoma treatment is the multitude of biosimilars that are becoming available as rituximab's patent expires. While the widespread use of rituximab itself will likely continue, its biosimilars will increase global access to the therapy. This review discusses current research into mechanisms and potential biomarkers of rituximab response, as well as its biosimilars and the newer CD20 binding mAb therapies. Increased ability to assess the effectiveness of rituximab in an individual patient, along with the availability of alternative anti-CD20 antibodies will likely lead to dramatic changes in how we use CD20 antibodies going forward.

The transgenic chicken derived anti-CD20 monoclonal antibodies exhibits greater anti-cancer therapeutic potential with enhanced Fc effector functions

Modern genetic techniques, enable the use of animal bioreactor systems for the production and functional enhancement of anti-cancer antibodies. Chicken is the most efficient animal bioreactor for the production of anti-cancer antibodies because of its relatively short generation time, plentiful reproductive capacity, and daily deposition in the egg white. Although several studies have focused on the production of anti-cancer antibodies in egg white, in-depth studies of the biological activity and physiological characteristics of transgenic chicken-derived anti-cancer antibodies have not been fully carried out. Here, we report the production of an anti-cancer monoclonal antibody against the CD20 protein from egg whites of transgenic hens, and validated the bio-functional activity of the protein in B-lymphoma and B-lymphoblast cells. Quantitative analysis showed that deposition of the chickenised CD20 monoclonal antibody (cCD20 mAb) from transgenic chickens increased in successive generations and with increasing transgene copy number. Ultra-performance liquid chromatography (UPLC) tandem mass spectrometry (LC/MS/MS) analysis showed that the cCD20 mAb exhibited 14 N-glycan patterns with high-mannose, afucosylation and terminal galactosylation. The cCD20 mAb did not exhibit significantly improved Fab-binding affinity, but showed markedly enhanced Fc-related functions, including complement-dependent cytotoxicity (CDC) and antibody-dependent cellular cytotoxicity (ADCC) compared to commercial rituximab, a chimeric mAb against CD20. Our results suggest that the transgenic chicken bioreactor is an efficient system for producing anti-cancer therapeutic antibodies with enhanced Fc effector functions.

Bioengineering of rFVIIa Biopharmaceutical and Structure Characterization for Biosimilarity Assessment

Eptacog alfa (NovoSeven^®) is a vitamin K-dependent recombinant Factor VIIa produced by genetic engineering from baby hamster kidney (BHK) cells as a single peptide chain of 406 residues. After activation, it consists of a light chain (LC) of 152 amino and a heavy chain (HC) of 254 amino acids. Recombinant FVIIa undergoes many post-translational modifications (PTMs). The first ten glutamic acids of the N-terminal moiety are γ-carboxylated, Asn145 and Asn322 are N-glycosylated, and Ser52 and Ser60 are O-glycosylated. A head-to-head biosimilarity study was conducted for the originator and the first biosimilar AryoSeven™ to evaluate comparable bioengineering. Physicochemical properties were analyzed based on mass spectrometry, including intact mass, PTMs and higher-order structure. Both biotherapeutics exhibit a batch-to-batch variability in their N-glycan profiles. N-Glycopeptide analysis with UHPLC-QTOF-MS^E confirmed N-glycosylation sites as well as two different O-glycopeptide sites. Ser60 was found to be O-fucosylated and Ser52 had O-glucose or O-glucose-(xylose)_1,2 motifs as glycan variants. Ion mobility spectrometry (TWIMS) and NMR spectroscopy data affirm close similarity of the higher-order structure of both biologicals. Potency of the biodrugs was analyzed by a coagulation assay demonstrating comparable bioactivity. Consequently, careful process optimization led to a stable production process of the biopharmaceuticals.

On the glycosylation aspects of biosimilarity

The recent expiration of several protein therapeutics opened the door for biosimilar development. Biosimilars are biologic medical products that are similar but not identical copies of already-authorized protein therapeutics. Critical quality attributes (CQA), such as post-translational modifications of recombinant biotherapeutics, are important for the clinical efficacy and safety of both the innovative biologics and their biosimilar counterparts. Here, we summarize biosimilarity CQAs, considering the regulatory guidelines and the statistical aspects (e.g., biosimilarity index) and then discuss glycosylation as one of the important attributes of biosimilarity. Finally, we introduced the 'Glycosimilarity Index', which is based on the averaged biosimilarity criterion.

Assessment of structural and functional similarity of biosimilar products: Rituximab as a case study

Biosimilars are products that are similar in terms of quality, safety, and efficacy to an already licensed reference/ innovator product and are expected to offer improved affordability. The most significant source of reduction in the cost of development of a biosimilar is the reduced clinical examination that it is expected to undergo as compared to the innovator product. However, this clinical relief is predicated on the assumption that there is analytical similarity between the biosimilar and the innovator product. As a result, establishing analytical similarity is arguably the most important step towards successful development of a biosimilar. Here, we present results from an analytical similarity exercise that was performed with five biosimilars of rituximab (Ristova®, Roche), a chimeric mouse/ human monoclonal antibody biotherapeutic, that are available on the Indian market. The results show that, while the biosimilars exhibited similarity with respect to protein structure and function, there were significant differences with respect to size heterogeneity, charge heterogeneity and glycosylation pattern.