Determination of chemical stability of sitagliptin by LC-UV, LC-MS and FT-IR methods

Analytical quality by design approach for the development of high-performance liquid chromatography method for simultaneous analysis of metformin and sitagliptin in the presence of major degradation products

An analytical quality by design-based high-performance liquid chromatography method for determining metformin (MET) and sitagliptin (SIT) in stress-degraded samples was developed and validated. The analytical target profile and risk assessment-driven critical method variables, for example, pH, % aqueous, and buffer concentration, were studied for their effect on method responses of retention time and resolution using a central composite design. The correlation regression coefficient was more than 0.8, and variables interaction was significant on method responses with curvature effect. The method operable design region afforded an aqueous range of 55%-70% and an ortho-phosphoric acid buffer of 0.1% with a pH of 3.0-4.0 as a robust region for the suitable method performance characteristics. The separation of MET and SIT from their degradants (m/z 85.0509; m/z 193.0694) on the C8 column was achieved using a mobile phase consisting of 0.1% ortho-phosphoric acid and methanol (60:40% v/v; pH 3.0). The optimized method eluted MET and SIT at 4.3 ± 0.2 and 7.1 ± 0.2 min, respectively, with acceptable specificity and resolution. The linearity ranges of 25-250 μg/mL (r2 : 0.9982) and 5-50 μg/mL (r2 : 0.9989) was established for MET and SIT, respectively. The % recovery (98.81%-102.17%), precision (0.55%-1.65%), and robustness study for method variables were acceptable.

Influence of biosolids and sewage effluent application on sitagliptin soil sorption

Biosolids and sewage effluent application to agricultural fields is becoming a win-win practice as both an economical waste management strategy and a source of nutrients and organic matter for plant growth. However, these organic wastes contain a variety of trace chemicals of environmental concern such as pharmaceuticals and personal care products (PPCPs), which may pose a risk to agricultural fields and ecosystems. This work aims to investigate the sorption of sitagliptin on four agricultural soils, evaluate the effects of biosolids and sewage effluent application, and elucidate the main sorption mechanism of the pharmaceutical on soils. The sorption study revealed that the sorption capacities of sitagliptin on different soils were positively related to the contents of soil organic matter and negatively associated with soil pH values. The application of biosolids and sewage effluent decreased the sorption capacity of sitagliptin, which may be attributed to the loading of dissolved organic matter derived from organic wastes. The Freundlich isotherm model demonstrated that the addition of biosolids from 0 to 100 % (W/W) consistently decreased the sorption affinity (Kf) of sitagliptin from 1.69 × 102 to 3.82 × 101 mg(1-n) Ln kg-1. Sewage application at 0, 10, 50, and 100 % (V/V) also reduced the Kf values from 1.69 × 102 to 9.17 × 101 mg(1-n) Ln kg-1. Attenuated Total Reflection (ATR)-Infrared (IR) spectroscopy analyses suggested that electrostatic interactions between carbonyl and amino groups of sitagliptin and the negatively charged soil surface are the main sorption mechanisms. In a co-solute system, the sorption affinity of sitagliptin on the soil decreased with increasing metformin concentrations, suggesting that competitive sorption may reduce the sorption capacity of individual contaminants in soil systems containing multiple PPCPs.

In vitro study and pharmacokinetic evaluation of sitagliptin phosphate enantiomers in rat plasma

Background: A chiral HPLC technique was developed to determine sitagliptin phosphate enantiomers in rat plasma in compliance with US FDA regulations. Methods & results: The technique used a Phenomenex column with a mobile phase consisting of a 60:35:5 (v/v/v) blend of pH4, 10-mM ammonium acetate buffer, methanol and 0.1% formic acid in Millipore water. The precision for both (R) and (S) sitagliptin phosphate varied between 0.246 and 1.246%, while the accuracy was 99.6-100.1%. A glucose uptake assay was used to assess enantiomers in 3T3-L1 cell lines through flow cytometry. Conclusion: Investigation of the pharmacokinetic impacts of sitagliptin phosphate racemic enantiomers in rat plasma revealed notable contrasts in R and S enantiomers in female albino Wistar rats, suggesting enantioselectivity for sitagliptin phosphate.

Metabolism and Chemical Degradation of New Antidiabetic Drugs (Part II): A Review of Analytical Approaches for Analysis of Gliptins

This paper is part II of the review on metabolism and chemical degradation of new antidiabetic drugs from glutides, gliflozins and gliptins. It is well known that metabolism data can be helpful for deriving safe levels of degradation impurities and their qualifying as far as toxicological aspects are concerned. As a result, it could link the quality of respective pharmaceutical products to clinical practice and patients. Some overlapping pathways of transformations of these important drugs of different chemical structures and different mechanisms of action were discussed. At the same time, the paper summarized interesting analytical tools for conducting modern drug metabolism as well as drug degradation experiments. The methods described here include liquid chromatography (LC) and liquid chromatography coupled with mass spectrometry (LC-MS or LC-MS/MS), which are widely used for detection and quantitative measurements of the drugs, their metabolites and degradants, as well as radiometric methods that are suitable for pharmacokinetic experiments. Special attention was paid to dedicated types of packing in chromatographic columns, as well as to special solutions in the LC-MS procedures. The present part addresses the analytical approaches elaborated for examining the metabolism and degradation pathways of gliptins that are dipeptidyl peptidase 4 (DPP-4) inhibitors.

Development and Validation for Quantification of 7-Nitroso Impurity in Sitagliptin by Ultraperformance Liquid Chromatography with Triple Quadrupole Mass Spectrometry

The purpose of this research study was to develop an analytical method for the quantification of 7-nitroso-3-(trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4] triazolo [4,3-a] pyrazine (7-nitroso impurity), which is a potential genotoxic impurity. Since sitagliptin is an anti-diabetic medication used to treat type 2 diabetes and the duration of the treatment is long-term, the content of nitroso impurity must be controlled by using suitable techniques. To quantify this impurity, a highly sensitive and reproducible ultraperformance liquid chromatography with triple quadrupole mass spectrometry (UHPLC-MS/MS) method was developed. The analysis was performed on a Kromasil-100, with a C18 column (100 mm × 4.6 mm with a particle size of 3.5 µm) at an oven temperature of approximately 40 °C. The mobile phase was composed of 0.12% formic acid in water, with methanol as mobile phases A and B, and the flow rate was set to 0.6 mL/min. The method was validated according to the current International Council for Harmonisation (ICH) guidelines with respect to acceptable limits, specificity, reproducibility, accuracy, linearity, precision, ruggedness and robustness. This method is useful for the detection of the impurity at the lowest limit of detection (LOD), which was 0.002 ppm, and the lowest limit of quantification (LOQ), which was 0.005 ppm. This method was linear in the range of 0.005 to 0.06 ppm and the square of the correlation coefficient (R2) was determined to be > 0.99. This method could help to determine the impurity in the regular analysis of sitagliptin drug substances and drug products.

DSC, FT-IR and NIR with Chemometric Assessment Using PCA and HCA for Estimation of the Chemical Stability of Oral Antidiabetic Drug Linagliptin in the Presence of Pharmaceutical Excipients

Pharmaceutical excipients should not interact with active substances, however, in practice, they sometimes do it, affecting the efficacy, stability and safety of drugs. Thus, interactions between active substances and excipients are not desirable. For this reason, two component mixtures of oral antidiabetic drug linagliptin (LINA) with four excipients of different reactivity, i.e., lactose (LAC), mannitol (MAN), magnesium stearate (MGS) and polyvinylpyrrolidone (PVP), were prepared in a solid state. A high temperature and a high humidity of 60 °C and 70% RH, respectively, were applied as stressors in order to accelerate the potential interactions between LINA and excipients. Differential scanning calorimetry (DSC) as well as Fourier transform infrared (FT-IR) and near infrared (NIR) spectroscopy were used to estimate the changes due to potential interactions. In addition, chemometric computation of the data with principal component analysis (PCA) and hierarchical cluster analysis (HCA) was applied to adequately interpret the findings. Of the excipients used in the present experiment, all of them were not inert in relation to LINA. Some of the interactions were shown without any stressing, whereas others were observed under high-temperature/high-humidity conditions. Thus, it could be concluded that selection of appropriate excipients for LINA is very important question to minimize its degradation, especially when new types of formulations with LINA are being developed and manufactured.

Ascorbic Acid Ameliorates Cardiac and Hepatic Toxicity Induced by Azithromycin-Etoricoxib Drug Interaction

The complexity of prescribing safe and effective drug therapy is still challenging. Due to the increased number of medications taken by patients, the potential for drug-drug interactions has clinically important consequences. This study focuses on the potential drug-drug interaction between azithromycin and etoricoxib and the possibility of counteracting this adverse reaction by giving ascorbic acid intraperitoneally to male albino rats. Sixty adult male albino rats weighing 150–180 g were used. The rats were allocated into six equal groups. One group was a control, and the others were given azithromycin, etoricoxib, either alone or combination, with one group treated with ascorbic acid and the last group treated with the drug combination and ascorbic acid. Blood samples were collected for measuring AST, ALT, LDH, CK-MB, and troponin alongside antioxidant enzymes and histopathological examination for both liver and heart tissue. The results showed both hepatic and cardiac damage in azithromycin and etoricoxib groups represented by increasing levels of heaptoc enzymes (ALT, AST, LDH, CK-MB, and troponin) with declining antioxidant enzymes and elevation of malondialdehyde and the appearance of hepatic and cardiac toxicities. Upon administration, ascorbic acid ameliorated all the mentioned biochemical parameters. In conclusion, ascorbic acid has great antioxidant capacities and hepatic and cardiac ameliorative effects and can alleviate drug interaction toxicity.

Antidiabetic Drug Sitagliptin with Divalent Transition Metals Manganese and Cobalt: Synthesis, Structure, Characterization Antibacterial and Antioxidative Effects in Liver Tissues

Metals and their complexes have an increasing number of medical applications. Sitagliptin (STG) acts as an antidiabetic drug. Mn(II) and Co(II) complexes were studied and characterized based on physical characterization, FT-IR, DG/TG, XRD, ESM, and TEM. Data revealed that STG acts as a bidentate ligand through the oxygen atom of a carbonyl group and the nitrogen atom of an amino group. Magnetic measurement data revealed that the Mn/STG metal complex has a square planner geometry. The experiment was performed on 40 male albino rats who were divided into four groups: the control group, STG group, group treated with STG/Mn, and group treated with Co/STG. Biomarkers for hepatic enzymes and antioxidants were found in the blood, and hepatic tissue histology was evaluated. STG in combination with Mn and Co administration showed potent protective effects against hepatic biochemical alterations induced by STG alone, as well as suppressing oxidative stress and structural alterations. These complexes prevented any stress and improved hepatic enzymatic levels more than STG alone. The STG/Mn complex was highly effective against Bacillus subtilis and Streptococcus pneumonia, while STG/Co was highly effective against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureas. Therefore, STG combined with Mn and Co produced a synergistic effect against oxidative stress and improved the histological structure of the liver tissues. STG metal complexes with Mn and Co showed the most potential ameliorative antioxidant and hepatoprotective effects.

Recent Progresses in Analytical Perspectives of Degradation Studies and Impurity Profiling in Pharmaceutical Developments: An Updated Review

Forced degradation studies have been used to simplify analytical methodology development and achieve a deeper knowledge about the inherent stability of active pharmaceutical ingredients (API) and drug products. This provides insight into degradation species and pathways. Identification of impurities in pharmaceutical products is closely related to the selection of the most appropriate analytical methods like HPLC-UV, LC-MS/MS, LC-NMR, GC-MS, and capillary electrophoresis. Herein, recent trends in analytical perspectives during 2018-April 14, 2021, are discussed based on forced and impurity degradation profiling of pharmaceuticals. Literature review showed that several methods have been used for experimental design and analysis conditions such as matrix type, column type, mobile phase, elution modes, detection wavelengths, and therapeutic category. Thus, since these factors influence the separation and identification of the impurities and degradation products, we attempted to perform a statistical analysis for the developed methods according to the abovementioned factors.

UV and (V)UV irradiation of sitagliptin in ultrapure water and WWTP effluent: Kinetics, transformation products and degradation pathway

Sitagliptin (SITA) is an antidiabetic drug consumed worldwide in high quantities. Because of the low removal rate of this compound in conventional wastewater treatment plants (WWTPs), it enters receiving surface waters with the discharged WWTP effluents. SITA can be detected up to μg/L concentration in rivers. In this study, UV (254 nm) and (V)UV (185 nm + 254 nm) irradiation was applied in laboratory scale to degrade SITA. The effect of three parameters was evaluated on the degradation rate, namely i) the efficiency in UV and (V)UV irradiation, ii) the presence or absence of dissolved oxygen, iii) the matrix effect of WWTP effluent. Degradation rate of SITA was largely increased by (V)UV irradiation, and decreased in WWTP effluent as expected. The presence of dissolved oxygen increased the degradation rate only in UV experiments and did not have a considerable effect in (V)UV experiments. In total, 14 transformation products (TPs) were identified (twelve new); their structures were proposed based on high-resolution mass spectrometry and nuclear magnetic resonance spectroscopy analyses. The most characteristic reaction steps of the degradation of SITA involved nucleophilic aromatic photosubstitution whereas hydroxide ions acted as attacking nucleophiles and replaced F atoms of the phenyl moiety by hydroxide groups, in agreement with the increase in photolysis rate with increasing pH. The photochemical degradation pathway of SITA was also interpreted. Kinetic profiles revealed TP 421, TP 208 and TP 192 to be the most recalcitrant TPs.

Comprehensive Insight into Chemical Stability of Important Antidiabetic Drug Vildagliptin Using Chromatography (LC-UV and UHPLC-DAD-MS) and Spectroscopy (Mid-IR and NIR with PCA)

During forced degradation, the intrinsic stability of active pharmaceutical ingredients (APIs) could be determined and possible impurities that would occur during the shelf life of the drug substance or the drug product could be estimated. Vildagliptin belongs to relatively new oral antidiabetic drugs named gliptins, inhibiting dipeptidyl peptidase 4 (DPP-4) and prolonging the activities of the endogenous incretin hormones. At the same time, some gliptins were shown as prone to degradation under specific pH and temperature conditions, as well as in the presence of some reactive excipients. Thus, forced degradation of vildagliptin was performed at high temperature in extreme pH and oxidative conditions. Then, selective LC-UV was used for quantitative determination of non-degraded vildagliptin in the presence of its degradation products and for degradation kinetics. Finally, identification of degradation products of vildagliptin was performed using an UHPLC-DAD-MS with positive ESI. Stability of vildagliptin was also examined in the presence of pharmaceutical excipients, using mid-IR and NIR with principal component analysis (PCA). At 70 °C almost complete disintegration of vildagliptin occurred in acidic, basic, and oxidative media. What is more, high degradation of vildagliptin following the pseudo first-order kinetics was observed at room temperature with calculated k values 4.76 × 10⁻⁴ s⁻¹, 3.11 × 10⁻⁴ s⁻¹, and 1.73 × 10⁻⁴ s⁻¹ for oxidative, basic and acidic conditions, respectively. Next, new degradation products of vildagliptin were detected using UHPLC-DAD-MS and their molecular structures were proposed. Three degradants were formed under basic and acidic conditions, and were identified as [(3-hydroxytricyclo- [3.3.1.13,7]decan-1-yl)amino]acetic acid, 1-{[(3-hydroxytricyclo[3.3.1.13,7]decan-1-yl)amino]acetyl}-pyrrolidine-2-carboxylic acid and its O-methyl ester. The fourth degradant was formed in basic, acidic, and oxidative conditions, and was identified as 1-{[(3-hydroxytricyclo[3.3.1.13,7]-decan-1-yl)amino]acetyl}pyrrolidine-2-carboxamide. When stability of vildagliptin was examined in the presence of four excipients under high temperature and humidity, a visible impact of lactose, mannitol, magnesium stearate, and polyvinylpirrolidone was observed, affecting-NH- and CO groups of the drug. The obtained results (kinetic parameters, interactions with excipients) may serve pharmaceutical industry to prevent chemical changes in final pharmaceutical products containing vildagliptin. Other results (e.g., identification of new degradation products) may serve as a starting point for qualifying new degradants of vildagliptin as it is related to substances in pharmacopoeias.

In Situ Neutral System Synthesis, Spectroscopic, and Biological Interpretations of Magnesium(II), Calcium(II), Chromium(III), Zinc(II), Copper(II) and Selenium(IV) Sitagliptin Complexes

Magnesium(II), calcium(II), chromium(III), zinc(II), copper(II), and selenium(IV) sitagliptin (STG) complexes—with the general formulas [Mg(STG)₂(Cl)₂]·6H₂O, [Ca(STG)₂(Cl)₂], [Cr(STG)₂(Cl)₂]Cl.6H₂O, [Zn(STG)₂(Cl)₂], [Cu(STG)₂(Cl)₂]·2H₂O, and [Se(STG)₂(Cl)₂]Cl₂, respectively—were designed and synthesized by the chemical reactions between metal(II, III, and IV) chloride salts with an STG ligand in situ methanol solvent in a 1:2 stoichiometric ratio (metal:ligand). Tentative structures of the complexes were proposed based on elemental analysis, molar conductance, magnetic moments, thermogravimetric analysis, and spectral (infrared, electronic, and ¹H NMR) data. The particle size and morphological investigation were checked on the bases of scanning electron microscopy, transmission electron microscopy, and X-ray powder diffraction analyses. All the Mg²⁺, Ca²⁺, Cr³⁺, Zn²⁺, Cu²⁺, and Se⁴⁺ complexes were found to be six-coordinated, wherein the STG ligands act as bidentate chelating agents. This study demonstrates that pancreatic tissues are affected by the induction of experimental diabetes mellitus and clarifies the potential of the synthesized STG complexes, which was found to more significantly improve insulin secretion and the pancreatic and glycometabolic complications of diabetic rats than STG alone.

Analytical quality by design in the development of a solvent-modified micellar electrokinetic chromatography method for the determination of sitagliptin and its related compounds

A solvent-modified micellar electrokinetic chromatography method was developed following the Quality by Design approach for the simultaneous determination of sitagliptin (SIT), an oral antihyperglycemic drug, and its main impurities derived from the synthesis process. The separation system was identified in the scouting phase and was made by sodium dodecyl sulphate (SDS) micelles with the addition of n-butanol and methanol. The knowledge space was investigated through an asymmetric screening matrix, taking into consideration eight critical method parameters (CMPs) involving the composition of the background electrolyte in terms of buffer concentration and pH, the concentration of surfactants and organic modifiers, and voltage. The critical method attributes (CMAs) were identified as analysis time and the distance between the tail of the electroosmotic flow system peak and the front edge of impurity I₁ (sitagliptin triazole hydrochloride). A Box-Behnken Design was used in response surface methodology for calculating the quadratic models relating the CMPs to the CMAs. From the models it was possible to compute the method operable design region (MODR) through Monte-Carlo simulations. The MODR was identified in the probability maps as the multidimensional zone where the risk of failure to achieve the desired values for the CMAs was lower than 10 %. The experimental conditions corresponding to the working point, with the MODR interval, were the following: background electrolyte, 14 (10-18) mM borate buffer pH 9.20, 100 mM SDS, 13.6 (11.1-16.0) %v/v n-butanol, 6.7 (4.5-8.8) %v/v methanol; voltage and temperature were set to 28 kV and 22 °C, respectively. The developed CE method was validated in accordance with International Council for Harmonisation guidelines and was applied to the analysis of SIT tablets. The routine analysis for the quality control of the pharmaceutical product could be conducted in about 11 min.

Exploring reductive degradation of fluorinated pharmaceuticals using Al2O3-supported Pt-group metallic catalysts: Catalytic reactivity, reaction pathways, and toxicity assessment

Recently, an increasing number of pharmaceutical compounds has become fluorinated. Owing to their pharmacological efficacy, the use of these fluorinated pharmaceuticals continues to grow, and they constitute 20% of the drugs on the current market. However, only a few studies have investigated the fate and transformation of these emerging contaminants in natural and engineered aquatic environments. In the present study, the H₂-based reductive transformation of three fluorinated pharmaceutical compounds (levofloxacin, sitagliptin, and fluoxetine) were investigated using alumina-supported monometallic and bimetallic catalysts of the Pt-group noble metals (i.e., Ru, Rh, Pd, and Pt) under ambient temperature and pressure conditions. Degradation of all three compounds was observed with catalytic reactivity ranging from 4.0  ×  10^-3 to 2.14  ×  10² L/(min·g_cat), in which fluoxetine generally showed the highest reactivity, followed by sitagliptin and levofloxacin. The fluorination yields and transformation products were characterized for each fluorinated compound and three different degradation mechanisms were elucidated: 1) hydrodefluorination of C-F bond to CH bond, 2) hydrogenation of aromatic ring, and 3) reductive cleavage of CO bond from phenyl ether. Toxicity assessment using Aliivibrio fischeri showed there were no significant changes in toxicity over levofloxacin and sitagliptin degradation, suggesting the formation of no highly toxic by-products during catalytic reduction. For fluoxetine, an increased toxicity was observed during its degradation while ECOSAR-predicted toxicity values of all identified intermediates were lower than that of fluoxetine, suggesting the formation of unidentified secondary by-products that contribute to the overall toxicity. The study showed that catalytic reduction is a promising remediation process for treating and defluorinating the fluorinated pharmaceutical compounds.

Comparative Study of Chemical Stability of Two H1 Antihistaminic Drugs, Terfenadine and Its In Vivo Metabolite Fexofenadine, Using LC-UV Methods

A comparative study of chemical stability of terfenadine (TER) and its in vivo metabolite fexofenadine (FEX) was performed. Both TER and FEX were subjected to high temperature at different pH and UV/VIS light at different pH and then quantitatively analyzed using new validated LC-UV methods. These methods were used to monitor the degradation processes and to determine the kinetics of degradation for both the compounds. As far as the effects of temperature and pH were concerned, FEX occurred more sensitive to degradation than TER. As far as the effects of UV/VIS light and pH were concerned, the both drugs were similarly sensitive to high doses of light. Using all stress conditions, the processes of degradation of TER and FEX followed the first-order kinetics. The results obtained for these two antihistaminic drugs could be helpful in developing their new derivatives with higher activity and stability at the same time.