Determination of metallic nanoparticles in soils by means spICP-MS after a microwave-assisted extraction treatment

Current sample preparation strategies for nanomaterials (NMs) analysis in soils by means single particle inductively coupled plasma mass spectrometry have significant constrains in terms of accuracy, sample throughput and applicability (i.e., type of NMs and soils). In this work, strengths and weakness of microwave assisted extraction (MAE) for NMs characterization in soils were systematically investigated. To this end, different extractants were tested (ultrapure water; NaOH, NH4OH, sodium citrate and tetrasodium pyrophosphate) and MAE operating conditions were optimized by means of design of experiments. Next, the developed method was applied to different type of metallic(oid) nanoparticles (Se-, Ag-, Pt- and AuNPs) and soils (alkaline, acid, sandy, clayey, SL36, loam ERMCC141; sludge amended ERM483). Results show that Pt- and AuNPs are preserved and quantitatively extracted from soils in 6 min (12 cycles of 30 s each) inside an 800 W oven by using 20 mL of 0.1 M NaOH solution. This methodology is applicable to soils showing a wide range of physicochemical properties except for clay rich samples. If clay soil fraction is significant (>15%), NMs are efficiently retained in the soil thus giving rise to poor recoveries (<10%). The analysis of labile NMs such as Se- and AgNPs is not feasible by means this approach since extraction conditions favors dissolution. Finally, when compared to current extraction methodologies (e.g., ultrasound, cloud point extraction, etc.), MAE affords better or equivalent accuracies and precision as well as higher sample throughput due to treatment speed and the possibility to work with several samples simultaneously.

Spartina alterniflora invasion decouples multiple elements in coastal wetland soils

Deciphering the biogeochemical coupling of multiple elements in soils could better mechanistic understanding of ecosystem stability response to the alien invasion. The coupling of 45 elements in soils from wetlands covered by Spartina alterniflora (Sa) was compared with that in soils covered by native Phragmites australis (Pa) in coastal regions of China. Results showed that S. alterniflora invasion not only significantly reshaped geochemical enrichment and dispersion states, but also decoupled the coupling of multiple elements in soils compared with Pa. Atomic mass emerged as the primary factor governing the coupling of multiple elements, of which a significantly positive correlation exhibited between atomic mass with elemental coupling in Pa, but no such relation was observed in SaThe coupling of lighter elements was more susceptible to and generally enhanced by the invasion of S. alterniflora compared to the heavier, of which carbon, iron (Fe), and cadmium (Cd) had the highest susceptibility. Besides atomic mass, biological processes (represented by soil organic carbon, nitrogen, phosphorus, and sulfur), interactions between sea and land (represented by salinity and pH), and their combination explained 17 %, 10 %, and 13 % variation in the coupling of multiple elements, respectively. The present work confirmed that S. alterniflora invasion was the important factor driving soil multi-element cycling and covariation in coastal wetlands.

Influence of microplastics on the availability of antibiotics in soils

Microplastics (MPs) and antibiotics, as two major types of emerging pollutants, inevitably coexist in the soil environment due to agricultural film residue, sewage irrigation and sludge application. However, the impact of MPs on antibiotic availability in soils with varying characteristics has not been extensively studied. Therefore, in this study, an interference experiment was conducted using three types of MPs (polyethylene (PE), polyvinyl chloride (PVC) and polypropylene (PP)) in red soil, paddy soil and cinnamon soil. The available antibiotics in soils were evaluated using diffusive gradients in thin-films (DGT). Results showed that MPs had a significant impact on the amount of antibiotics adsorbed on soil solid (Cs) by providing additional binding sites or altering soil characteristics (e.g., pH and dissolved organic carbon). The most significant effects on Cs were observed in cinnamon soil, and the Cs values were dependent on concentration of MPs. The available antibiotics, as measured by DGT significantly decreased after the addition of MPs. This decrease was influenced by the soil characteristics. However, the concentration of antibiotics in soil solutions (Cd) was only slightly impacted by MPs. Therefore, the influence of MPs on the migration of antibiotics was reflected by their impact on the soil/water partition coefficient (Kd), while the resupply ability (R) from the soil solid phase was less influential. Moreover, the dosage of MPs had a significant effect on the availability of antibiotics in CS by promoting the adsorption of antibiotics on the solid phase, while in RS and PS, the soil properties played a dominate role in the changes in antibiotic availability after MP addition. These results indicate that the impact of MPs on available antibiotics mainly depends on soil properties. In addition, DGT measurement is more sensitive than soil solution to investigate the effects of coexisting pollutants on the behavior of antibiotics in soil.

Comparative analysis of characteristics of antibiotic resistomes between Arctic soils and representative contaminated samples using metagenomic approaches

Antibiotic resistance is one of the most concerned global health issues. However, comprehensive profiles of antibiotic resistance genes (ARGs) in various environmental settings are still needed to address modern antibiotic resistome. Here, Arctic soils and representative contaminated samples from ARG pollution sources were analyzed using metagenomic approaches. The diversity and abundance of ARGs in Arctic soils were significantly lower than those in contaminated samples (p < 0.01). ARG profiles in Arctic soils were featured with the dominance of vanF, ceoB, and bacA related to multidrug and bacitracin, whereas those from ARG pollution sources were characterized by prevalent resistance to anthropogenic antibiotics such as sulfonamides, tetracyclines, and beta-lactams. Mobile genetic elements (MGEs) were found in all samples, and their abundance and relatedness to ARGs were both lower in Arctic soils than in polluted samples. Significant relationships between bacterial communities and ARGs were observed (p < 0.01). Cultural bacteria in Arctic soils had clinically-concerned resistance to erythromycin, vancomycin, ampicillin, etc., but ARGs relevant to those antibiotics were undetectable in their genomes. Our results suggested that Arctic environment could be an important reservoir of novel ARGs, and antibiotic stresses could cause ARG pollution via horizontal gene transfer and enrichment of resistant bacteria.

Simulation of vertical migration behaviors of heavy metals in polluted soils from arid regions in northern China under extreme weather

Heavy metal migration behaviors and mechanisms in soils are important for pollution control and remediation. However, there are few related studies in arid areas under extreme weather patterns. In this study, we developed a one-dimensional continuous point source unsaturated solute transport model, and utilized Hydrus-1D to simulate the transport of Cu, As and Zn, in the pack gas zones of soils within the impact areas of two typical mining areas in Inner Mongolia. The results show that the soil has a significant interception capacity, with a short heavy metal vertical migration distance of ≤100 cm. Soil texture and heavy metal sorption affinity are two key factors that influence heavy metal transport. In soils with high contents of sands but low contents of clays, heavy metals have large mobility and thus migrate deeper and are more evenly distributed in the soil profile. The migration of different heavy metals in the same soil also varies considerably, with large migration depth for metals having low binding affinities onto soils. Scenario analysis for extreme drought and rainfall shows that, rainfall amount and intensity are positively correlated with heavy metal transport depth and negatively correlated with the peak concentration. Increasing rainfall/intensity results in a more uniform distribution of heavy metals, and lower profile concentrations owing to enhanced horizontal dispersion of surface runoff. When the total amount and intensity of rainfall remain constant, continuous or intermittent rainfall only affects the transport process but has almost no effect on the final pollutant concentration redistribution in the soil. These results provide theoretical data for estimating the degree of heavy metal pollution, and help design control and remediation strategies for polluted soils.

Nutrient transport, shear strength and hydraulic characteristics of topsoils amended with mulch, compost and biosolids

Anthropogenic disturbance of soils can disrupt soil structure, diminish fertility, alter soil chemical properties, and cause erosion. Current remediation practices involve amending degraded urban topsoils lacking in organic matter and nutrition with organic amendments (OA) to enhance vegetative growth. However, the impact of OAs on water quality and structural properties at rates that meet common topsoil organic matter specifications need to be studied and understood. This study tested three commonly available OAs: shredded wood mulch, leaf-based compost, and class A Exceptional Quality stabilized sewage sludge (or biosolids) for nutrient (nitrogen and phosphorus) water quality, soil shear strength, and hydraulic properties, through two greenhouse tub studies. Findings showed that nitrogen losses to leachate were greater in the biosolids amended topsoils compared to leaf-compost, mulch amended topsoils, and control treatments. Steady-state mean total nitrogen (N) concentrations from biosolids treatment exceeded typical highway stormwater concentrations by at least 25 times. Soil total N content combined with the carbon:nitrogen ratio were identified to be the governing properties of N leaching in soils. Study soils, irrespective of the type of amendment, reduced the applied (tap) water phosphorus (P) concentration of ∼0.3 mg-P/L throughout the experiment. Contrary to the effects on N leaching, P was successfully retained by the biosolids amendment, due to the presence of greater active iron contents. A breakthrough mechanism for P was observed in leaf compost amended soil, where the effluent concentrations of P continued to increase with each rainfall application, possibly due to an saturation of soil adsorption sites. The addition of OAs also improved the strength and hydraulic properties of soils. The effective interlocking mechanisms between the soil and OA surfaces could provide soil its required strength and stability, particularly on slopes. OAs also improved soil fertility to promote turf growth. Presence of vegetative root zones can further reinforce the soil and control erosion.

Application of the partial least square regression method in determining the natural background of soil heavy metals: A case study in the Songhua River basin, China

The "background" is an essential index for identifying anthropogenic inputs and potential ecological risks of soil heavy metals. However, the lithology of bedrock can cause significant spatial variation in the natural background of soil elements, posing considerable difficulties in estimating background values. In this study, an attempt was made to calculate the natural background through regression analysis of soil chemical composition, and reasonably evaluate the impact of lithology. A total of 1771 surface soil samples were collected from the Songhua River Basin, China, for chemical composition analysis, and the partial least square regression (PLSR) method was employed to establish the relationship between heavy metals (As, Hg, Cr, Cd, Pb, Cu, Zn, and Ni) and soil chemical composition/environmental parameters (SiO2, Al2O3, TFe2O3, MgO, CaO, K2O, Na2O, La, Y, Zr, V, Sc, Sr, Li and pH). The result shows that As, Cr, Pb, Cu, Zn, and Ni have significant linear relationships with soil chemical composition. Each of these six heavy metals obtained 1771 regression background values; some were higher than the uniform background value obtained from the boxplot, while others were lower. The regression background values recognized not only subtle anthropogenic inputs and potential ecological risks in low-background regions but also spurious contamination in high-background areas. All these indicate that the PLSR method can effectively improve the determination accuracy of the natural background of soil heavy metals. More attention should be paid to the serious anthropogenic inputs appearing in some places of the study area.

Insights into the pH-dependent interactions of sulfadiazine antibiotic with soil particle models

Sulfonamide antibiotics (SAs) are widely used as a broad-spectrum antibiotic, leading to global concerns due to their potential soil accumulation and subsequent effects on ecosystems. SAs often exhibit remarkable environmental persistence, necessitating further investigation to uncover the ultimate destiny of these molecules. In this work, molecular dynamics simulations combined with complementary quantum chemistry calculations were employed to investigate the influence of pH on the behavior of sulfadiazine (SDZ, a typical SAs) in soil particle models (silica, one of the main components of soil). Meanwhile, the quantification of SDZ molecules aggregation potential onto silica was further extended. SDZ molecules tend to form a monolayer on the soil surface under acidic conditions while forming aggregated adsorption on the surface under neutral conditions. Due to the hydrophilicity of the silica, multiple hydration layers would form on its surface, hindering the further adsorption of SDZ molecules on its surface. The calculated soil-water partition coefficient (Psoil/water) of SDZ+ and SDZ were 9.01 and 7.02, respectively. The adsorption evaluation and mechanisms are useful in controlling the migration and transformation of SAs in the soil environment. These findings provide valuable insights into the interactions between SDZ and soil components, shedding light on its fate and transport in the environment.

Soil adsorption potential: Harnessing Earth's living skin for mitigating climate change and greenhouse gas dynamics

Soil adsorption, which could be seen as a crucial ecosystem service, plays a pivotal role in regulating environmental quality and climate dynamics. However, despite its significance, it is often undervalued within the realms of research and policy frameworks. This article delves into the multifaceted aspects of soil adsorption, incorporating insights from chemistry and material science, ecological perspectives, and recent advancements in the field. In exploring soil components and their adsorption capacities, the review highlights how organic and inorganic constituents orchestrate soil's aptitude for pollutant mitigation and nutrient retention/release. Innovative materials and technologies such as biochar are evaluated for their efficacy in enhancing these natural processes, drawing a link with the sustainability of agricultural systems. The symbiosis between soil microbial diversity and adsorption mechanisms is examined, emphasizing the potential for leveraging this interaction to bolster soil health and resilience. The impact of soil adsorption on global nutrient cycles and water quality underscores the environmental implications, portraying it as a sentinel in the face of escalating anthropogenic activities. The complex interplay between soil adsorption mechanisms and climate change is dissected, identifying research gaps and advocating for future investigations to elucidate the dynamics underpinning this relation. Policy and socioeconomic aspects form a crucial counterpart to the scientific discourse, with the review assessing how effective governance, incentivization, and community engagement are essential for translating soil adsorption's functionality into tangible climate change mitigation and sustainable land-use strategies. Integrating these diverse but interconnected strata, the article presents a comprehensive overview that not only charts the current state of soil adsorption research but also casts a vision for its future trajectory. It calls for an integrated approach combining scientific inquiry, technological innovation, and proactive policy to leverage soil adsorption's full potential to address environmental challenges and catalyze a transition towards a more sustainable and resilient future.

Using surface-enhanced Raman spectroscopy to probe artificial dye degradation on hair buried in multiple soils for up to eight weeks

The discovery of clandestine burials poses unique challenges for forensic specialists, requiring diverse expertise to analyze remains in various states. Bones, teeth, and hair often endure the test of time, with hair particularly exposed to the external environment. While existing studies focus on the degradation of virgin hair influenced by soil pH and decomposition fluids, the interaction between artificial dyes on hair and soil remains underexplored. This paper introduces a novel approach to forensic hair analysis that is based on high-throughput, nondestructive, and non-invasive surface-enhanced Raman spectroscopy (SERS) and machine learning. Using this approach, we investigated the reliability of the detection and identification of artificial dyes on hair buried in three distinct soil types for up to eight weeks. Our results demonstrated that SERS enabled the correct prediction of 97.9% of spectra for five out of the eight dyes used within the 8 weeks of exposure. We also investigated the extent to which SERS and machine learning can be used to predict the number of weeks since burial, as this information may provide valuable insights into post-mortem intervals. We found that SERS enabled highly accurate exposure intervals to soils for specific dyes. The study underscores the high achievability of SERS in extrapolating colorant information from dyed hairs buried in diverse soils, with the suggestion that further model refinement could enhance its reliability in forensic applications.

A global review on the abundance and threats of microplastics in soils to terrestrial ecosystem and human health

Soil is the source and sink of microplastics (MPs), which is more polluted than water and air. In this paper, the pollution levels of MPs in the agriculture, roadside, urban and landfill soils were reviewed, and the influence of MPs on soil ecosystem, including soil properties, microorganisms, animals and plants, was discussed. According to the results of in vivo and in vitro experiments, the possible risks of MPs to soil ecosystem and human health were predicted. Finally, in light of the current status of MPs research, several prospects are provided for future research directions to better evaluate the ecological risk and human health risk of MPs. MPs concentrations in global agricultural soils, roadside soils, urban soils and landfill soils had a great variance in different studies and locations. The participation of MPs has an impact on all aspects of terrestrial ecosystems. For soil properties, pH value, bulk density, pore space and evapotranspiration can be changed by MPs. For microorganisms, MPs can alter the diversity and abundance of microbiome, and different MPs have different effects on bacteria and fungi differently. For plants, MPs may interfere with their biochemical and physiological conditions and produce a wide range of toxic effects, such as inhibiting plant growth, delaying or reducing seed germination, reducing biological and fruit yield, and interfering with photosynthesis. For soil animals, MPs can affect their mobility, growth rate and reproductive capacity. At present epidemiological evidences regarding MPs exposure and negative human health effects are unavailable, but in vitro and in vivo data suggest that they pose various threats to human health, including respiratory system, digestive system, urinary system, endocrine system, nervous system, and circulation system. In conclusion, the existence and danger of MPs cannot be ignored and requires a global effort.

Factors controlling Mn and Zn contents in leaves of silver and downy birch in acidified soils of Central Europe and Norway

In Central European mountain forests, foliar element concentrations (FECs) of manganese (Mn) in silver birch (Betula pendula Roth) are occasionally approximately 5000 mg kg-1 and can represent stress for these plants. Factors controlling the Mn FECs in silver birch in Central Europe and downy birch (Betula pubescens Ehrh.) in Norway have not yet been fully deciphered. In this study, the Central European silver birch specimens were sampled in 2022. The samples were analysed by X-ray fluorescence spectroscopy. Norwegian data were obtained from the literature. Mn FECs are commonly negatively correlated with magnesium and, in certain areas, with potassium. Mn FECs are simultaneously elevated with zinc (Zn), likely because of soil acidification and anthropogenic emissions. Mn FECs in birch were previously thought to be related to altitude, which was assigned to (i) downslope washes of Mn or (ii) the historical load of acid emissions. The highest Mn FECs in silver birch were found in the Harz Mountains, Germany, and have been attributed to historical atmospheric contamination and the abundance of soils on felsic silicic rocks poorly buffering acid rains. The historical emission load from iron and steel production was hypothesised to be the cause of elevated Mn and Zn FECs in the Beskid Mountains, Czech Republic. Mn FECs in birch can be used to map historical soil acidification caused by industrial emissions. Zn FECs in birches can reflect soil contamination by this element.

Impacts of pristine, aged and leachate of conventional and biodegradable plastics on plant growth and soil organic carbon

Plastic is an essential component of agriculture globally, becoming a concerning form of pollution. Biodegradable alternatives are gaining attention as a potential replacement for commonly used, non-degradable plastics, but there is little known about the impacts of biodegradable plastics as they age and potential leachates are released. In this study, different types (conventional: polyethylene and polypropylene and biodegradable: polyhydroxybutyrate and polylactic acid) of micro- and meso-films were added to soil at 0.1% (w/w) prior to being planted with Lolium perenne (perennial ryegrass) to evaluate the plant and soil biophysical responses in a pot experiment. Root and shoot biomass and chlorophyll content were reduced when soil was exposed to plastics, whether conventional or biodegradable, pristine, aged or when just their leachate was present. The pH and organic matter content of soil exposed to these plastics and their leachates was significantly reduced compared to control samples; furthermore, there was an increase in CO2 respiration rate from soil. In general, meso (> 5 mm) and micro (< 5 mm) plastic films did not differ in the impact on plants or soil. This study provides evidence that conventional and biodegradable plastics have both physical and chemical impacts on essential soil characteristics and the growth of L. perenne, potentially leading to wider effects on soil carbon cycling.

Microplastics in soils: Production, behavior process, impact on soil organisms, and related toxicity mechanisms

In recent years, microplastics (MPs) pollution has become a hot ecological issue of global concern and MP pollution in soil is becoming increasingly serious. Studies have shown that MPs have adverse effects on soil biology and ecological functions. Although MPs are evident in soils, identifying their source, abundance, and types is difficult because of the complexity and variability of soil components. In addition, the effects of MPs on soil physicochemical properties (PCP), including direct effects such as direct interaction with soil particles and indirect effects such as the impact on soil organisms, have not been reported in a differentiated manner. Furthermore, at present, the soil ecological effects of MPs are mostly based on biological toxicity reports of their exudate or size effects, whereas the impact of their surface-specific properties (such as environmentally persistent free radicals, surface functional groups, charge, and curvature) on soil ecological functions is not fully understood. Considering this, this paper reviews the latest research findings on the production and behavioral processes of MPs in soil, the effects on soil PCP, the impacts on different soil organisms, and the related toxic mechanisms. The above discussion will enhance further understanding of the behavioral characteristics and risks of MPs in soil ecosystems and provide some theoretical basis for further clarification of the molecular mechanisms of the effects of MPs on soil organisms.

Adsorption-desorption of Atrazine with 9 Agricultural Soils in China

In this work, the characteristics and mechanisms for atrazine adsorption-desorption with 9 types of soils were investigated with batch equilibrium studies, elemental analyses, infrared spectroscopy, and UV‒visible spectroscopy. The atrazine sorption data for the 9 soils showed better fits with the Freundlich model than the Langmuir model, except with Red earth in Jiangxi (REJ) The results showed that the adsorption capacity was positively correlated with the organic matter (OM) content and negatively correlated with cation-exchange capacity (CEC) and pH. UV‒visible spectroscopy showed that dissolved organic matter (DOM) in the soil enhanced atrazine adsorption, but the adsorption on different DOM fractions was quite different. In addition, the infrared spectra revealed differences in the functional groups of soils and these functional groups may drive the adsorption process via hydrogen bonding and coordination with the -NH2 groups in atrazine.

Source characteristics of polycyclic aromatic hydrocarbons and polychlorinated biphenyls in surface soils of Shenyang, China: A comparison of two receptor models combined with Monte Carlo simulation

The surface soil concentrations of 16 PAHs and 15 PCBs were simultaneously determined by gas chromatography-tandem mass spectrometry in 21 locations of urban areas of Shenyang. The average concentrations of PAHs and PCBs were 26.40 ± 34.68 mg/kg and 48.03 ± 27.47 μg/kg, respectively. Factor analysis with nonnegative constraints (FA-NNC) and absolute principal component score with multiple linear regression (APCS-MLR) model were used to explore and evaluate the sources of PAHs and PCBs in the study area. The results of FA-NNC showed that PAHs in soils were mainly from traffic emissions (49.64%), coal combustion (46.88%) and petrogenic source (3.49%). The PCBs in soils were mainly from commercial and high temperature combustion mixed sources (20.3%), combustion and industry emission mixed sources (21.1%), electrical equipment sources (22.2%) and traffic emission sources (36.4%). The results of APCS-MLR were consistent with those of FA-NNC. The uncertainty of FA-NNC and APCS-MLR model was analyzed by Monte Carlo simulation method. The results revealed the reliability of the two receptor models on source apportionment. The estimated carcinogenic risks indicated that the risks of PAHs in soils exceed the acceptable range (10-6-10-4), while the risks of PCBs were below the acceptable risk level of 10-6.

Biogeographic survey of soil bacterial communities across Antarctica

BACKGROUND

Antarctica and its unique biodiversity are increasingly at risk from the effects of global climate change and other human influences. A significant recent element underpinning strategies for Antarctic conservation has been the development of a system of Antarctic Conservation Biogeographic Regions (ACBRs). The datasets supporting this classification are, however, dominated by eukaryotic taxa, with contributions from the bacterial domain restricted to Actinomycetota and Cyanobacteriota. Nevertheless, the ice-free areas of the Antarctic continent and the sub-Antarctic islands are dominated in terms of diversity by bacteria. Our study aims to generate a comprehensive phylogenetic dataset of Antarctic bacteria with wide geographical coverage on the continent and sub-Antarctic islands, to investigate whether bacterial diversity and distribution is reflected in the current ACBRs.

RESULTS

Soil bacterial diversity and community composition did not fully conform with the ACBR classification. Although 19% of the variability was explained by this classification, the largest differences in bacterial community composition were between the broader continental and maritime Antarctic regions, where a degree of structural overlapping within continental and maritime bacterial communities was apparent, not fully reflecting the division into separate ACBRs. Strong divergence in soil bacterial community composition was also apparent between the Antarctic/sub-Antarctic islands and the Antarctic mainland. Bacterial communities were partially shaped by bioclimatic conditions, with 28% of dominant genera showing habitat preferences connected to at least one of the bioclimatic variables included in our analyses. These genera were also reported as indicator taxa for the ACBRs.

CONCLUSIONS

Overall, our data indicate that the current ACBR subdivision of the Antarctic continent does not fully reflect bacterial distribution and diversity in Antarctica. We observed considerable overlap in the structure of soil bacterial communities within the maritime Antarctic region and within the continental Antarctic region. Our results also suggest that bacterial communities might be impacted by regional climatic and other environmental changes. The dataset developed in this study provides a comprehensive baseline that will provide a valuable tool for biodiversity conservation efforts on the continent. Further studies are clearly required, and we emphasize the need for more extensive campaigns to systematically sample and characterize Antarctic and sub-Antarctic soil microbial communities. Video Abstract.

Evaluating metal phytorremediation and biondication potential of Spartina alterniflora in a South American estuary

Soil metal pollution has been widely studied in salt marshes but mainly regarding non-essential metals. The aim of this study was to assess the levels of two essential metals (Fe and Mn) and one non-essential one (Cd) in Spartina alterniflora salt marshes in a South American estuary in order to evaluate the potential of this species as a phytoremediator and/or bioindicator of Fe, Mn and Cd and to analyze the distribution of these metals according to the edaphic conditions. The metals present in the soils varied among the three sites studied according to the content of organic matter and fine sediments. In comparison with other Spartina-dominated salt marshes worldwide, in this study Fe and Mn were approximately in the same range, whereas Cd levels were always lower, with a high number of samples below the method detection limit (MDL). All metals were highly correlated with each other suggesting an association of Cd with Mn and Fe oxides/hydroxides or sulfides and/or a common anthropogenic source. Metals in plant tissues also varied from site to site and between the aboveground and belowground tissues. Compared to the metal levels in Spartina tissues in other salt marshes, our levels of Fe and Mn were in the same range, whereas the Cd levels were lower, among most samples, especially those from aboveground tissues that were below the MDL. The bioconcentration factor (metal in belowground tissues/metal in soil) was always lower than one for Fe and Mn meaning that there is no accumulation of these metals in belowground tissues, but this factor for Cd was sometimes higher than one, even as high as 3.45, implying that S. alterniflora can accumulate this metal in its tissues, pointing to a potential role of this species in Cd phytoremediation. Translocation factors (metal in aboveground tissues/metal in belowground tissues) were always lower than one for Fe and could not be calculated for Cd but were usually higher than one for Mn, showing the role of this element in photosynthetic tissues and a possible function of this species for phytoextraction of Mn. In most samples the Fe levels in plant tissues were higher than the permissible levels reported in the literature, suggesting a potential role of S. alterniflora in Fe phytoremediation. No correlation was observed between metal concentrations in soils and aboveground tissues; therefore, S.alterniflora is not a good bioindicator for the metals studied. Although our results are not conclusive, they reinforce the importance of local edaphic conditions on the behavior of metals in salt marshes and shed light on the potential role of S. alterniflora in the phytoremediation of highly toxic metals such as Cd or poorly studied metals such as Fe and Mn.

Extractability and phytotoxicity of heavy metals and essential elements from plastics in soil solutions and root exudates

Plastic waste is increasing and is a serious environmental problem. Among the threats associated with plastics is the release of contaminants into the environment. This study aimed to evaluate the efficiency of metals release from plastics (low-density polyethylene (LDPE), polyethylene terephthalate (PET), and polypropylene (PP)) as affected by different soil solution types, artificial root exudates, and distilled water. The extent of metal release varied depending on the type of solution and plastic used. Metals were leached most effectively from plastics in soil solutions, followed by root exudates, and least effectively by distilled water. LDPE released the highest concentrations of Cu and Na into solution, PP released the greatest amount of Fe, and PET released the most Cr. The efficiencies of Mg and Zn release from the plastics (PP and PET) varied by solution type. Among the plastics studied, LDPE exhibited the strongest ability to adsorb metals, such as Fe, Cr, Mg, and Zn from soil solutions. The amount of metal released from the plastics was also dependent on pH, dissolved organic carbon (DOC) concentrations, and the electrical conductivity (EC) of the solutions. Moreover, plastic extracts were found to have negative effects on germination and growth in Lepidium sativum.

Application of Cu isotopes to identify Cu sources in soils impacted by multiple anthropogenic activities

Copper (Cu) is an important micronutrient for animals and plants, but it is toxic at high concentrations in soil. Soils adjacent to industrial areas would be subjected to severe Cu pollution. Identifying Cu sources in the surface environment is crucial for understanding their pollution level and fate. This study investigated Cu content, isotope composition of topsoils, and two soil profiles with varying levels of Cu contamination and related potential Cu sources in southwest China. The difference in Cu isotope compositions of tailing (1.29 ± 0.08 ‰), smelting fly ash (0.04 ± 0.03 ‰), coal (2.44 ± 0.09 ‰), coal-burning fly ash (0.34 ± 0.03 ‰), and geogenic soil (0.10 ± 0.03 ‰) enabled us to distinguish anthropogenic Cu from geogenic Cu. The plot of δ65Cu and 1/Cu demonstrates that Cu of the polluted soils was from three end-members: the smelting fly ash, the vehicle exhaust, and the background soils. Based on the mass balance model, we calculated that the fly ash from smelting was the major anthropogenic source, contributing approximately 29 % of Cu contamination in soils, and the diesel exhaust was another important source, with a contribution rate of approximately 25 %. Additionally, soil profile results suggest that anthropogenic Cu could transport through soil profiles and influence Cu content and isotope signatures of subsurface soils, at least to a depth of ∼60 cm. Finally, our research indicates that Cu isotopes could be a promising tool for tracing industrial pollution, as significant Cu isotope fractionation would occur during the smelting process. Our research highlights the contribution of smelting and diesel exhaust to Cu contamination in the soils in a representative mining area. These findings serve as a scientific foundation for the development of policy for pollution control in industrial-affected regions.

Distribution of potentially toxic elements in soils and sediments in Pearl River Delta, China: Natural versus anthropogenic source discrimination

Although anthropogenic contamination has been regarded as the most important source of potentially toxic elements (PTEs) in soils of large river delta plains, the extent to which human activities affect PTEs in soils is worth exploring. This study used high density geochemical data to distinguish source patterns of PTEs in soils of the Pearl River Delta Economic Zone, a large industrialized and urbanized area in China. Enrichment factor, discriminant analysis, principal components analysis, cumulative distribution function, and positive matrix factorization were used to identify sources of PTEs in soils. The results indicated that parent material was the most significant factor affecting geochemical characteristics of PTEs in soils. Median concentrations of Cd, Cr, Cu, Hg, Pb, and Zn were 0.400, 88.5, 40.5, 0.143, 43.0, and 116.0 mg/kg for stream sediments, 0.333, 75.7, 39.0, 0.121, 42.6, and 98.5 mg/kg for deep soils, and 0.365, 74.0, 45.1, 0.143, 44.6, and 119.5 mg/kg for surface soils, respectively, all of which exceed relevant reference standards. Compared with stream sediments and deep soils, surface soils exhibit substantial concentrations of PTEs. Chemical weathering and erosion of parent materials distributed in the Pearl River Delta were the main sources of PTEs in soils. Diffuse contamination and many small local contamination sources distributed throughout the study area were the most significant anthropogenic sources of PTEs in surface soils. Intensive human activities failed to change the soil geochemical characteristics derived from the parent material at the regional scale. However, it could induce non-point source pollution and local severe PTEs pollution in surface soils.

A review on radionuclide pollution in global soils with environmental and health hazards evaluation

Human populations are being exposed to a wide spectrum of radiation from soils as a result of the availability of radiation sources. Assessing the ecological and health effects of radionuclides in soils is crucial to support the optimal soil management practices but large-scale studies are limited. This study compiled data on radionuclides (226Ra, 232Th, 40K, 238U, and 137Cs) in soils located across the world (44 countries and 159 places) between 2008 and 2022 and applied radiological hazards indices and several multivariate statistical approaches. The average activity concentration (Bq/kg) of 226Ra, 232Th, 40K, 238U, and 137Cs were 408.56, 144.80, 508.78, 532.78, and 83.12, respectively, whereas 226Ra, 232Th, 40K, and 238U exceeded the standard limits. The principal component analysis explained more than 91% of variation in soils. Based on the geoaccumulation index, 40K posed moderately to heavy contamination whereas 238U and 226Ra posed moderate contamination in soils. Moreover, the mean values of radiological hazards evaluation such as radium equivalent activity (487.17 Bq/kg), external radiation hazard indices (1.32), internal hazard indices (2.15), absorbed dose rate (247.86 nGyh-1), annual effective dose rate (1.82 mSvy-1), activity utilization index (4.54) and excess lifetime cancer risk (63.84 × 10-4) were higher than recommended limit suggesting significant radiological risks in study region soils. The findings indicated that the study area soils were contaminated by radionuclides and unsafe for hazards in terms of the health risks linked with studied radioactive contents. The study is valuable for mapping radioactivity across the globe to determine the level of radioactivity hazards.

Edaphic properties as pieces of evidence of tailings deposit on soils

Mine tailings are one of the primary contaminant sources of heavy metals and metalloids in the soil. Besides increasing the concentration of potentially toxic elements (PTEs), tailings may modify the edaphic conditions and decrease the buffer capacity of impacted soils. The influence of tailings may reach distances far from the impoundments depending on the transport path and the specific transport mean: air, rain (runoff and infiltration), or acid mine drainage. In this study, soil samples from various horizons were collected in trial pits along a transect, at different distances from sulfide tailings. Soil analysis included texture, organic matter, alkalinity, porous space, carbonates, pH, electrical conductivity, real density, apparent density, total sulfur, main mineralogy, and total concentrations of As, Cd, Pb, Fe, and Zn. Graphical and statistical interpretation of the results showed that real density and porous space are the leading indicators of the tailings dispersion and accumulation and that pH is not a significant parameter (all values were above the neutrality) due to the limestone abundance in the area. However, Zn and Cd concentrations had an inverse relation with pH. Differences in the concentrations of PTEs between the superficial and deep layers that increased toward the tailings were also observed. Gypsum was only present in the closest samples to the tailings and may also be an indicator of tailings' influence on soils. This study allowed us to identify general edaphic parameters as a first and quick means to determine the tailings contamination of soils.

Assessing the differences of two vineyards soils' by NIR spectroscopy and chemometrics

Soil properties influence greatly the status of vine plants which consequently influences the quality of wine. Therefore, in the context of viticulture management, it is extremely important to assess the physical and chemical parameters of vineyards soils. In this study, the soils of two vineyards were analysed by near-infrared (NIR) spectroscopy and established analytical reference procedures. The main objective of this study was to verify if NIR spectroscopy is a potential tool to discriminate the soils of both vineyards as well as to quantify differences of soil's parameters. For that, a total of eight sampling spots were selected at each vineyard taking into consideration the soil type and sampled at different depths. The data analysis was performed using analysis of variance (ANOVA), principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) and partial least squares (PLS) regression. The ANOVA results revealed that 12 out of the 18 parameters analysed through the reference procedures can be considered statistically different (p < 0.05). Regarding PCA, the obtained results revealed a clear separation between the scores of both vineyards either considering NIR spectra or the chemical parameters. The PLS-DA model was able to obtain 100 % of correct predictions for the discrimination of both vineyards. PLS regression analysis using NIR spectra revealed R2P and RER values higher than 0.85 and 10, respectively, for 8 (pH (H2O), N, Ca2+, Mg2+, SB, CEC, ECEC and GSB) of the 18 chemical parameters evaluated. Concluding, these results demonstrate that it is possible to discriminate the soils of the different vineyards through NIR spectroscopy as well as to quantify several chemical parameters through soils NIR spectra in a rapid, accurate, cost-effective, simple and environmentally friendly way when compared to the reference procedures.

Occurrence, distribution and risk assessment of polycyclic aromatic hydrocarbons in soils around main water source areas of Beijing, China

Polycyclic aromatic hydrocarbons (PAHs) in urban environments have been globally concerned due to their significant health impacts on residents. However, little is known about potential risks of PAHs from centralized water source areas. In the present study, 326 soils samples from the main water source areas of Beijing were collected and the occurrence, source appointment, and risks of PAHs were systematically investigated based on the monitoring results from high-performance liquid chromatography (HPLC). The total PAHs (∑16 PAHs) concentrations ranged from 5.70 to 1512 ng/g with median value of 44.2 ng/g, in which 4-ring and 5-ring groups were the major components. PAHs concentrations in the cultivated land were significantly higher than other areas, which could reflect significant impact of soil organic matter and total nitrogen contents on the spatial variations of PAHs. Further source identifications through positive matrix factorization model (PMF) revealed that biomass (22.5%), coal (21.4%), gasoline (17.6%) and diesel (16.4%) combustion were dominant sources of soil PAHs in the study area. Moreover, the risk assessment indicated that total ecological and health risk of PAHs were negligible, but individual PAH, including pyrene and benzo(b)fluoranthene, should be concerned due to their potential risks in several monitored stations located in the secondary protection area of four reservoirs. Our study provided new insights into environmental risks of soils in main water source areas from PAHs and could be helpful for organic micropollutant controlling and drinking water safety in rapidly urbanizing cities.

Heavy metals pollution of soil in central plains urban agglomeration (CPUA), China: human health risk assessment based on Monte Carlo simulation

The present study conducted the concentration evaluation, pollution assessment, source analysis, and risk assessment of heavy metals in the soil of the CPUA, China, to contribute to the smooth construction of urban agglomeration. Elevated levels of mean concentrations of cadmium (Cd), chromium (Cr), and copper (Cu) in the soils were shown compared to background values. Cu and zinc (Zn) and also lead (Pb) and Cd exhibited spatial similarity. Manganese (Mn) and Cr exhibited point source characteristics such as the concentrations at a point much higher than the surrounding area. The potential ecological risk in the northern region belonged to the moderate risk level category. Cd contributed over 90% to the potential ecological risk. The health risk among children was higher than that among adults. The major exposure pathways were different for adults and children. Exposure, as shown using Hazard Index (HI), to adults was mainly through the skin contact route, while to children was through both the skin contact and ingestion route. The primary CR (carcinogenic risk) to adults was through the inhalation route, while that to children was through the ingestion route. In both children and adults, Cr was the main contributor to HI and CR. According to the Monte Carlo simulation results, the cumulative probability of exceeding the critical value of HI for children was approximately 2.8-3.0 times that for adults. According to the sensitivity analysis results, non-carcinogenic risk prevention should begin mainly by reducing exposure duration and skin contact. The cancer risk may be reduced primarily by decreasing the exposure duration and controlling ingestion. The PMF (Positive Matrix Factorization) source analysis revealed that Pb mainly came from transportation sources. In addition, Cu, Pb, and Mn were derived mainly from agricultural sources. Cr was derived mostly from a natural source, and Cd originated mainly from an industrial source.

Virus diversity and activity is driven by snowmelt and host dynamics in a high-altitude watershed soil ecosystem

BACKGROUND

Viruses impact nearly all organisms on Earth, including microbial communities and their associated biogeochemical processes. In soils, highly diverse viral communities have been identified, with a global distribution seemingly driven by multiple biotic and abiotic factors, especially soil temperature and moisture. However, our current understanding of the stability of soil viral communities across time and their response to strong seasonal changes in environmental parameters remains limited. Here, we investigated the diversity and activity of environmental soil DNA and RNA viruses, focusing especially on bacteriophages, across dynamics' seasonal changes in a snow-dominated mountainous watershed by examining paired metagenomes and metatranscriptomes.

RESULTS

We identified a large number of DNA and RNA viruses taxonomically divergent from existing environmental viruses, including a significant proportion of fungal RNA viruses, and a large and unsuspected diversity of positive single-stranded RNA phages (Leviviricetes), highlighting the under-characterization of the global soil virosphere. Among these, we were able to distinguish subsets of active DNA and RNA phages that changed across seasons, consistent with a "seed-bank" viral community structure in which new phage activity, for example, replication and host lysis, is sequentially triggered by changes in environmental conditions. At the population level, we further identified virus-host dynamics matching two existing ecological models: "Kill-The-Winner" which proposes that lytic phages are actively infecting abundant bacteria, and "Piggyback-The-Persistent" which argues that when the host is growing slowly, it is more beneficial to remain in a dormant state. The former was associated with summer months of high and rapid microbial activity, and the latter with winter months of limited and slow host growth.

CONCLUSION

Taken together, these results suggest that the high diversity of viruses in soils is likely associated with a broad range of host interaction types each adapted to specific host ecological strategies and environmental conditions. As our understanding of how environmental and host factors drive viral activity in soil ecosystems progresses, integrating these viral impacts in complex natural microbiome models will be key to accurately predict ecosystem biogeochemistry. Video Abstract.

Influence of biosolids and sewage effluent application on sitagliptin soil sorption

Biosolids and sewage effluent application to agricultural fields is becoming a win-win practice as both an economical waste management strategy and a source of nutrients and organic matter for plant growth. However, these organic wastes contain a variety of trace chemicals of environmental concern such as pharmaceuticals and personal care products (PPCPs), which may pose a risk to agricultural fields and ecosystems. This work aims to investigate the sorption of sitagliptin on four agricultural soils, evaluate the effects of biosolids and sewage effluent application, and elucidate the main sorption mechanism of the pharmaceutical on soils. The sorption study revealed that the sorption capacities of sitagliptin on different soils were positively related to the contents of soil organic matter and negatively associated with soil pH values. The application of biosolids and sewage effluent decreased the sorption capacity of sitagliptin, which may be attributed to the loading of dissolved organic matter derived from organic wastes. The Freundlich isotherm model demonstrated that the addition of biosolids from 0 to 100 % (W/W) consistently decreased the sorption affinity (Kf) of sitagliptin from 1.69 × 102 to 3.82 × 101 mg(1-n) Ln kg-1. Sewage application at 0, 10, 50, and 100 % (V/V) also reduced the Kf values from 1.69 × 102 to 9.17 × 101 mg(1-n) Ln kg-1. Attenuated Total Reflection (ATR)-Infrared (IR) spectroscopy analyses suggested that electrostatic interactions between carbonyl and amino groups of sitagliptin and the negatively charged soil surface are the main sorption mechanisms. In a co-solute system, the sorption affinity of sitagliptin on the soil decreased with increasing metformin concentrations, suggesting that competitive sorption may reduce the sorption capacity of individual contaminants in soil systems containing multiple PPCPs.

Snow Microorganisms Colonise Arctic Soils Following Snow Melt

Arctic soils are constantly subjected to microbial invasion from either airborne, marine, or animal sources, which may impact local microbial communities and ecosystem functioning. However, in winter, Arctic soils are isolated from outside sources other than snow, which is the sole source of microorganisms. Successful colonisation of soil by snow microorganisms depends on the ability to survive and compete of both, the invading and resident community. Using shallow shotgun metagenome sequencing and amplicon sequencing, this study monitored snow and soil microbial communities throughout snow melt to investigate the colonisation process of Arctic soils. Microbial colonisation likely occurred as all the characteristics of successful colonisation were observed. The colonising microorganisms originating from the snow were already adapted to the local environmental conditions and were subsequently subjected to many similar conditions in the Arctic soil. Furthermore, competition-related genes (e.g. motility and virulence) increased in snow samples as the snow melted. Overall, one hundred potentially successful colonisers were identified in the soil and, thus, demonstrated the deposition and growth of snow microorganisms in soils during melt.

Dynamics of trace element enrichment in blue carbon ecosystems in relation to anthropogenic activities

Blue carbon ecosystems (BCEs), located at the land-sea interface, provide critical ecological services including the buffering of anthropogenic pollutants. Understanding the interactions between trace element (TE) loads in BCEs and socioeconomic development is imperative to informing management plans to address pollution issues. However, the identification of anthropogenic TE pollution in BCEs remains uncertain due to the complex geochemical and depositional processes and asynchronous socioeconomic development along continental coastlines. Here, priority-controlled TE (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) concentrations in the mangrove, saltmarsh and seagrass soils and plant tissues along the coastline of China were investigated while taking bare flat and upland soils as corresponding references. We demonstrate that blue carbon (BC) soils accumulated markedly higher concentrations of anthropogenic TEs than the reference soils, mainly due to the effective trapping of fine-grained particles and higher binding capacities. We identify the time course of TE changes over the last 100 years which shows increasing anthropogenic TE accumulation resulting from military activities (1930-1950) and the growth of industrial and agricultural activities (1950-1980), then reaching a maximum after national economic reform (1980-2000). Since the 2000s, decreases in TE discharges driven by socioeconomic reform and strengthened environmental regulations have led to a widespread reversal of anthropogenic TE concentrations in BC soils. Based on the current TE flux we estimate that BCEs can filter over 27.3-100 % of the TEs emitted in industrial wastewaters from Chinese coastal provinces annually. However, the uptake of these TEs by plants can be substantially reduced through various mechanisms offered by edaphic properties such as organic carbon, clay, and sulfur contents. Therefore, enhancing TE filtering while preventing TEs from entering food webs through the conservation and restoration of BCEs will greatly aid in achieving the sustainable development goal of the coastal zone under intensified anthropogenic activities.

Ecogenotoxicity assessment with land snails: A mini-review

In the context of the increasing environmental and sanitary crisis, it is accepted that soil pollution can cause health alterations and disturb natural population dynamics. Consequently, the assessment of the genotoxic potential of compounds found in contaminated soils is important. Indeed, the alteration of genomic integrity may increase the risk of cancer development and may impair reproduction and long-term population dynamics. Among the methodologies to assess terrestrial genotoxic potential, there has been growing interest during the last decade in monitoring alterations of the genome in bioindicators of soil quality. As some land snail species are recognized bioindicators of soil quality, especially to assess the environmental and toxicological bioavailability of compounds, this review focuses on current knowledge regarding the genotoxicology of land snails. Classical biomarkers to assess genotoxic effects have been used (e.g., DNA breakage, micronuclei, random amplification polymorphic DNA) at various stages of the life cycle, including embryos. The studies were performed in vitro, in vivo, in situ and ex situ and covered a diverse set of contaminants (nanoparticles, metal(loid)s, pesticides, polycyclic aromatic hydrocarbons) and snail species (Cantareus aspersus, Eobania vermiculata, Theba pisana, Helix lucorum). Based on recent studies reviewed here, the use of land snails to map soil genotoxic potential is promising due to their ability to reveal pollution and subsequent environmental risks. Moreover, the position of snails in the trophic chain and the existing bridges between contaminant bioavailability to snails and bioaccessibility to humans reinforce the value of land snail-based ecotoxicological assessment.

Are nanoplastics potentially toxic for plants and rhizobiota? Current knowledge and recommendations

Soil is now becoming a reservoir of plastics in response to global production, use/disposal patterns and low recovery rates. Their degradation is caused by numerous processes, and this degradation leads to the formation and release of plastic nanoparticles, i.e., nanoplastics. The occurrence of nanoplastics in the soil is expected to both directly and indirectly impact its properties and functioning. Nanoplastics may directly impact the physiology and development of living organisms, especially plants, e.g., by modifying their production yield. Nanoplastics can also indirectly modify the physicochemical properties of the soil and, as a result, favour the release of related contaminants (organic or inorganic) and have an impact on soil biota, and therefore have a negative effect on the functioning of rhizospheres. However all these results have to be taken carefully since performed with polymer nano-bead not representative of the nanoplastics observed in the environment. This review highlight thus the current knowledge on the interactions between plants, rhizosphere and nanoplastics, their consequences on plant physiology and development in order to identify gaps and propose scientific recommendations.

Potential interaction mechanisms between PAHs and glomalin related-soil protein (GRSP)

Glomalin-related soil protein (GRSP) has gained widespread attention because of its benefits to carbon sequestration, improving soil quality and fixing heavy metals. However, studies on how GRSP affects the environmental fate of organic contaminants are scarce. In this study, different types of GRSPs were isolated from forest soils and characterized to study the binding of GRSPs and PAHs under different environmental conditions. The results indicated that GRSPs contain abundant functional groups (such as -NH, -COOH, and CO) and material composition, like humic acid, proteins, and lipids. For the tested GRSPs, EE-GRSP has lower DOC, SUVA₂₆₀ and SUVA₂₈₀ values, as well as higher E2/E3 values, indicating that EE-GRSP has lower hydrophobicity and molecular weight. These properties can lead to strong interactions between GRSP and PAHs, especially with benzopyrene, which has a high K_ow and K_sw and a large molecular size, with binding constants ranging from 16,119 to 163,697 L kg^-1. Furthermore, low pH (pH = 3) and temperature (15 °C) could increase GRSP's aggregation, enhance the GRSP binding ability with PAHs, whose binding constants were 11,595 and 5067.3 L kg^-1. Therefore, the binding between GRSP and PAHs may lead to changes in the fate of PAHs in the soil and affect the environmental risk of PAHs. The results presented here will deepen our understanding of the environmental function of GRSPs and provide a theoretical basis to further elucidate the mechanisms of GRSPs and organic pollutants.

The spatial distribution, health risk, and cytotoxicity of metal(loid)s in contaminated field soils: The role of Cd in human gastric cells damage

The spatial distribution and pollution level of heavy metal(loid)s in soil (0-6 m) from a typical industrial region in Jiangmen City, Southeast China was investigated. Their bioaccessibility, health risk, and human gastric cytotoxicity in topsoil were also evaluated using an in vitro digestion/human cell model. The average concentrations of Cd (87.52 mg/kg), Co (106.9 mg/kg), and Ni (1007 mg/kg) exceeded the risk screening values. The distribution profiles of metal(loid)s showed a downward migration trend to reach a depth of 2 m. The highest contamination was found in topsoil (0-0.5 m), with the concentrations of As, Cd, Co, and Ni being 46.98, 348.28, 317.44, and 2395.60 mg/kg, respectively, while Cd showed the highest bioaccessibility in the gastric phase (72.80 %), followed by Co (21.08 %), Ni (18.27 %), and As (5.26 %) and unacceptable carcinogenic risk. Moreover, the gastric digesta of topsoil suppressed the cell viability and triggered cell apoptosis, evidenced by disruption of mitochondrial transmembrane potential and increase of Cytochrome c (Cyt c) and Caspases 3/9 mRNA expression. Bioaccessible Cd in topsoil was responsible for those adverse effects. Our data suggest the importance to reduce Cd in the soil to decrease its adverse impacts on the human stomach.

Trace metal contamination status in soils of the abandoned gold mining district of Bindiba (East Cameroon): Pollution indices assessment, multivariate analysis and; geostatistical approach

In this study, contamination by trace metals (TMs) such as Cr, Ni, Cu, As, Pb and Sb in the soils of the Bindiba mining district was assessed. This study aims to reveal the current status of the soil quality of the abandoned gold mining district of Bindiba and provide a scientific basis for its future remediation and overall management. 89 soil samples were systematically collected and characterized in order to determine the concentration of TMs (Cr, Ni, Cu, As, Pb and Sb). To assess the degree of metallic contamination, pollution indices were employed. Both multivariate statistical analysis (MSA) and geostatistical modelling (GM) were used to identify the potential sources of TMs elements and to determine the values of the modified contamination degree (mCd), the Nemerow Pollution Index (NPI) and the potential ecological risk index (RI) at un-sampled points. The results of trace metals (TMEs) characterization showed that the concentration of Cr, Ni, Cu, As, Pb and Sb ranged from 22.15-442.44 mg/kg, 9.25-360.37 mg/kg, 1.28-320.86 mg/kg, 0-46.58 mg/kg, 0-53.27 mg/kg and 0-6.33 mg/kg, respectively. The mean concentration of Cr, Cu and Ni exceeds the continental geochemical background values. The Enrichment Factor (EF) assessment indicates two categories of enrichment: moderately to extremely enrichment for Cr, Ni, and Cu and deficiency to minimal enrichment of Pb, As and Sb. Multivariate statistical analysis shows weak linear correlations between the studied heavy metals and suggests that these metals could not come from the same origins. The geostatistical modelling based on the values of mCd, NI and RI suggests a potential high pollution risk existed in the study area. The mCd, NPI and RI interpolation maps showed that the Northern part of the gold mining district was characterized by a high degree of contamination, heavy pollution, and considerable ecological risk. The dispersion of TMs in soils could mainly be attributed to anthropogenic activities and natural phenomena (chemical weathering or erosion). Appropriate measures should be taken to manage and remediate the TMs pollution in this abandoned gold mining district in order to reduce its negative effects on the environment and health of the local population.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40201-023-00849-y.

Occurrence, seasonal variations, distribution patterns, and risk assessment of volatile monoaromatic hydrocarbons in soils of industrial parks in Yangtze River Delta, China

Monoaromatic hydrocarbons (MACHs) are a ubiquitous category of volatile compounds found in various environmental media. Despite their prevalence, systematic studies of MACHs on a large regional scale are still lacking. Herein, a comprehensive investigation of the occurrence, seasonal variations, distribution characteristics, and health risks of MACHs was carried out by analyzing soil samples (372 surface soils and 96 soil columns) from 33 typical industrial parks in the Yangtze River Delta (YRD) region. MACHs were detected in all surface soil samples. BTEXS (benzene, toluene, ethylbenzene, xylene, and styrene) were the five predominant congeners with the highest detection frequencies (90.9 %-100 %), collectively accounting for >78.2 % of the total MACHs content. Higher residual levels of MACHs were observed in winter compared to summer (P < 0.01), with total concentrations of 24 MACHs ranging from 30.9 ng/g to 1536 ng/g (median: 135 ng/g) in winter and 16.3 ng/g to 931 ng/g (median: 87.9 ng/g) in summer. Soils collected from the northeast of Jiangsu Province and the southwest of Anhui Province exhibited relatively higher levels of MACHs. On the basis of principal component analysis, we proposed that industrial emissions and vehicle exhaust may be the main sources of MACHs contamination in the soils of YRD industrial parks. Vertically, the concentrations of total MACHs decreased with the soil depth. Soil organic matter (OM) content and the concentration of MACHs in the surface soil layer (0-15 cm) were significant factors influencing the vertical migration and distribution of MACHs (P < 0.05). It was verified that residual MACHs in the soils posed lower lifetime non-carcinogenic and carcinogenic risks to the inhabitants of the study area. The field study provides valuable evidence for the formulation of MACHs pollution control policies in the YRD region.

Heavy metal accumulation, biochemical and transcriptomic biomarkers in earthworms Eisenia andrei exposed to industrially contaminated soils from south-eastern Tunisia (Gabes Governorate)

Heavy metal pollution is causing harmful consequences on soil fertility, and earthworms are frequently employed as test organisms to evaluate the ecotoxicity of polluted soils. In this study, Eisenia andrei was exposed for 7 and 14 days to polymetallic contaminated soils collected from an industrial zone in the south-eastern Tunisia. Earthworm growth, heavy metal accumulation, genotoxicity, cytotoxicity, biochemical and transcriptional responses were determined. Results revealed a higher accumulation of heavy metals in earthworms after 14 than 7 days of soil exposure, a reduction in lysosomal membrane stability (LMS), besides an increase in micronuclei frequency (MN). Moreover, earthworm oxidative status was affected in terms of increases in malondialdehyde (MDA) and metallothionein (MTs) content, and enhancement of catalase (CAT) and glutathione-S-transferase (GST) activities. An inhibition of acetylcholinesterase (AChE) activity was also observed in treated earthworms, whereas transcriptional data demonstrated an up-regulation of cat, gst, mt, p21 and topoisomerase genes. Overall, these findings support the use of earthworms as suitable bioindicator species for pollution monitoring and assessment, advance our understanding of the interaction between heavy metals and earthworms, and provide valuable information about the harmful impact of biota exposure to naturally contaminated soils.

Cyanobacteria as a Valuable Natural Resource for Improved Agriculture, Environment, and Plant Protection

Taking into consideration, the challenges faced by the environment and agro-ecosystem make increased for suggestions more reliable methods to help increase food security and deal with difficult environmental problems. Environmental factors play a critical role in the growth, development, and productivity of crop plants. Unfavorable changes in these factors, such as abiotic stresses, can result in plant growth deficiencies, yield reductions, long-lasting damage, and even death of the plants. In reflection of this, cyanobacteria are now considered important microorganisms that can improve the fertility of soils and the productivity of crop plants due to their different features like photosynthesis, great biomass yield, ability to fix the atmospheric N2, capability to grow on non-arable lands, and varied water sources. Furthermore, numerous cyanobacteria consist of biologically active substances like pigments, amino acids, polysaccharides, phytohormones, and vitamins that support plant growth enhancement. Many studies have exposed the probable role of these compounds in the alleviation of abiotic stress in crop plants and have concluded with evidence of physiological, biochemical, and molecular mechanisms that confirm that cyanobacteria can decrease the stress and induce plant growth. This review discussed the promising effects of cyanobacteria and their possible mode of action to control the growth and development of crop plants as an effective method to overcome different stresses.

Graphical Abstract

Impacts of periodic saltwater inundation on heavy metals in soils from the Pearl River Delta, China

The alluvial plain delta is vulnerable to complex land-sea interactions as a result of rising sea levels and increasing storm surges due to global environmental change. Topsoil samples (0-20 cm) from the Pearl River Delta (PRD) were subjected to periodic artificial saltwater inundation treatments with varying salinities (0, 35‰, 40‰, 50‰) for 50 days to explore the impacts of saltwater inundation on heavy metals (Cd, Pb, Zn) in soils. The inundation treatments reached dynamic equilibrium in approximately 20 days, and heavy metals were promoted to release into leachate. The extraction rate of heavy metals was highest with artificial saltwater at 40‰ salinity, which was generally attributed to pH variation, increasing ionic strength and reductive dissolution of Fe-Mn oxyhydroxides. However, once the salinity reached 50‰, a higher SO2- 4concentration could depress the release of heavy metals by providing more negative adsorption sites. Cd in soils was most likely to leach, followed by Zn, but Pb showed higher retention. After saltwater inundation, the bioavailability of heavy metals decreased in the order Cd > Zn > Pb. Redundancy analysis (RDA) results demonstrated that Cd and Zn are more susceptible to soluble salt ions in soils than Pb. The retention of Pb could be attributed to its larger ionic radius and reduced hydrated radius as well as the stable species under the pH conditions of the treatments. This study suggests that the migration of heavy metals could reduce the water quality and increase the ecological risk of the interaction zone between land and sea.

Entrainment and horizontal atmospheric transport of microplastics from soil

Soils are an important source of microplastics (MPs) to the atmosphere but the fluxes and mechanisms involved in MPs entrainment are not well understood. In the present study, a series of horizontally aligned sediment traps have been deployed at different heights within 1 m above the ground for a two-month period at various locations in an arid region (Sarakhs, Iran). MPs were isolated from sediments and were quantified and characterised according to size, colour, shape and polymer composition by established techniques. Most MPs were <250 μm in length, fibres were the most important shape, black and blue-green were the dominant colours, and polymer abundance decreased in the order polyethylene > nylon > polypropylene > polystyrene > polyethylene terephthalate. The distributions of sediment mass (range <0.01-9 g) and number of MPs (range = 0 to 21) were heterogeneous, both between sites and at the different heights sampled, and yielded median, vertically-averaged horizontal fluxes for the region of about 450 g m^-2 d^-1 and 2600 MP m^-2 d^-1, respectively. However, when data were pooled, the number of MPs normalised to sediment mass exhibited a significant inverse relationship with sediment mass, an effect attributed to the presence of ambient suspended MPs and sediment that are diluted by the suspension of soil and deposited MPs at higher wind speeds. The mechanisms of MP saltation and entrainment were not ascertained but a theoretical framework for threshold shear velocity based on regularly-shaped particles and density considerations is presented. Further experimental work is required to verify this framework, and in particular for fibrous MPs with different aerodynamic properties to soil particles.

Unraveling the source(s) and fate of Pb in urban soils and sediments of Ibadan metropolis using lead isotopes

In this study an attempt was made to determine the source(s) and nature of Pb in environmental media of Ibadan, one of the largest cities in west Nigeria. Seventy-three samples comprising forty stream sediments, twenty-five soils and eight rocks samples were used for the study. Mineralogical compositions of the samples were determined by X-ray diffraction. The elemental constituents were determined using ICP-MS; while the Pb isotopes were determined using Sector-field ICP-MS. Sequential analysis of selected samples was carried out using a modified Tessier's five-step method. The dominant minerals identified were quartz, kaolinite, k-feldspar, and plagioclase. The concentrations (mg/kg) of Pb in soils, sediments, and rocks ranged from 13.00-470.00; 89.00-3288.00 and 2.90-20.30, respectively. The ²⁰⁴Pb, ²⁰⁶Pb, ²⁰⁷Pb, ²⁰⁸Pb ranged from 1.72-47.41; 30.69-779.68; 27.00-664.46 and 65.67-1642.27 in the soils and sediments, respectively, while they ranged from 0.02-0.07; 0.56-2.33; 0.38-1.56 and 1.19-4.13 in the rocks. Further evaluation of Pb concentration in the soils and sediments revealed high to extreme Pb pollution status, while the calculated Pb isotopic ratios (IRs) in the soil and sediments varied from that of the underlying bedrocks. The IRS in soils and sediments were characterized by low (1.161-1.172 and 1.127-1.200, and 2.281-2.444 and 2.276-2.474) ^206/207 Pb and ^208/207 Pb, while those of the rocks were high (1.456-1.753 and 2.647-3.149), indicating additional anthropogenic sourcing of Pb in the soils and sediments. The analyzed Pb revealed fractions more partitioned in the reactive geochemical phases with the Pb partitioned in the exchangeable (0.11-0.23%), carbonate (9.00-43.58%), reducible (8.32-13.53%) and organic/sulfides (42.78-82.45%) phases. This implies that there may be enhanced mobility of Pb in the environmental samples and ultimately bio-adsorption into living tissues in the environment.

A synthesis of mercury research in the Southern Hemisphere, part 1: Natural processes

Recent studies demonstrate a short 3-6-month atmospheric lifetime for mercury (Hg). This implies Hg emissions are predominantly deposited within the same hemisphere in which they are emitted, thus placing increasing importance on considering Hg sources, sinks and impacts from a hemispheric perspective. In the absence of comprehensive Hg data from the Southern Hemisphere (SH), estimates and inventories for the SH have been drawn from data collected in the NH, with the assumption that the NH data are broadly applicable. In this paper, we centre the uniqueness of the SH in the context of natural biogeochemical Hg cycling, with focus on the midlatitudes and tropics. Due to its uniqueness, Antarctica warrants an exclusive review of its contribution to the biogeochemical cycling of Hg and is therefore excluded from this review. We identify and describe five key natural differences between the hemispheres that affect the biogeochemical cycling of Hg: biome heterogeneity, vegetation type, ocean area, methylation hotspot zones and occurence of volcanic activities. We review the current state of knowledge of SH Hg cycling within the context of each difference, as well as the key gaps that impede our understanding of natural Hg cycling in the SH. The differences demonstrate the limitations in using NH data to infer Hg processes and emissions in the SH.

Is a dissipation half-life of 5 years for chlordecone in soils of the French West Indies relevant?

Recently, Comte et al. (2022) re-examined the natural degradation of chlordecone (CLD) in the soils of the French West Indies (FWI) by introducing an additional 'dissipation parameter' into the WISORCH model developed by Cabidoche et al. (2009). Recent data sets of CLD concentrations in FWI soils obtained by Comte et al. enabled them optimizing the model parameters, resulting in significantly shorter estimates of pollution persistence than in the original model. Their conclusions jeopardize the paradigm of a very limited degradation of CLD in FWI soils, which may lead to an entire revision of the management of CLD contamination. However, we believe that their study is questionable on several important aspects. This includes potential biases in the data sets and in the modeling approach. It results in an inconsistency between the estimated dissipation half-life time (DT50) of five years that the authors determined for CLD and the fate of CLD in soil from the application period 1972-1993 until nowadays. Most importantly, a rapid dissipation of CLD in the field as proposed by Comte et al. is not sufficiently supported by data and estimates. Hence, the paradigm of long-term persistence of CLD in FWI soils is still to be considered.

Assessing the bioavailability of antibiotics in soil with the diffusive gradients in thin films (DGT)

The diffusive gradients in thin films (DGT) technique is an excellent method for investigating the dynamic processes of antibiotics in soils. However, whether it is applicable in antibiotic bioavailability assessment is yet to be disclosed. This study employed DGT to determine the antibiotic bioavailability in soil, and compared the results with plant uptake, soil solutions, and solvent extraction methods. DGT exhibited predictive capability for plant taking in antibiotics proved by the significant linear relationship between the DGT based concentration (C_DGT) and antibiotic concentration in roots and shoots. Although the performance of soil solution was acceptable based on linear relationship analysis, its stability was weaker than DGT. The results based on plant uptake and DGT indicated the bioavailable antibiotic contents in different soils were inconsistent because of the distinct mobility and resupply of sulphonamides and trimethoprim in different soils, as represented by K_d and R_ds, which were affected by soil properties. Plant species played an important role in antibiotic uptake and translocation. Antibiotic uptake by plants depends on antibiotic, plant and soil. These results confirmed the capability of DGT in determining antibiotic bioavailability for the first time. This work provided a simple and powerful tool for environmental risk evaluation of antibiotics in soils.

Spatial characteristics, sources and exposure risk of polychlorinated biphenyls in dusts and soils from an urban environment in the Niger Delta of Nigeria

Chlorinated organic compounds, such as polychlorinated biphenyls (PCBs), are a threat to both humans and the environment because of their toxicity, persistence, and capacity for long-range atmospheric transport. The concentrations of 28 PCB congeners, including 12 dioxin-like and seven indicator PCBs, were investigated in soils, and indoor and outdoor dusts from Port Harcourt city, Nigeria, in order to evaluate the characteristic distribution patterns in these media, their sources, and possible risk. The PCB concentrations varied from 4.59 to 116 ng g^-1 for soils, and from 1.80 to 23.0 ng g^-1 and 2.73 to 57.4 ng g^-1 for indoor and outdoor dusts respectively. The sequence of PCB concentrations in these matrices was soil > outdoor dust > indoor dust. The composition of PCBs in these matrices indicated the prevalence of lower chlorinated PCBs in indoor and outdoor dusts, while the higher chlorinated congeners were dominant in soils. Di-PCBs were the predominant homologues in indoor dusts, while deca-PCBs were the most prevalent homologues in outdoor dusts and soils. The TEQ values of dioxin-like PCBs in 60 % of the soils, 100 % of the indoor dust, and 30 % of the outdoor dust were above the indicative value of 4 pg TEQ g^-1 established by the Canadian authority. The hazard index (HI) values for exposure of adults and children to PCBs in these media were mostly greater than one, while the total cancer risk (TCR) values exceeded the acceptable risk value of 10^-6, which indicate probable non-carcinogenic and carcinogenic risks resulting from exposure to PCBs in these media. Source analysis for PCBs in these matrices shows that they originated from diverse sources.

Smelter-derived soil contamination in Luanshya, Zambia

Extensive mining and smelting contributed to the declining quality of Luanshya soils. The local smelter was the epicenter of contamination as shown by a spatial distribution analysis. Closeby soil profiles smelter exhibit extremely high Cu concentrations (up to 46,000 mg kg^-1 Cu) relative to deeper layers where only background levels of trace elements were observed. A remote profile did not exhibit significant contamination. Lead isotopic ratios revealed that Pb contamination in the Luanshya soils was not smelter-derived. It was shown in this way that the historical usage of leaded gasoline was the main source of this metal. Although the Luanshya smelter also produced Co, this metal was not an important contaminant. Copper leaching was a concern in Luanshya. Upwards of 52 % of Cu was extractable in the exchangeable step of a sequential extraction procedure (SEP), but only for samples where Cu concentrations were high, suggesting that Cu was released exclusively from anthropogenic particles. This was supported by the SEP results for similar depths at the remote soil, where only a small fraction of Cu was labile (5.6 %). Lead and Co were strongly bound in the soils throughout. The excess of Cu in the topsoils was mostly bound in smelter-derived particles. These appeared as spherical fast-cooled droplets composed mostly of sulfides, oxides, and glass. X-ray diffraction and electron probe microanalysis of those particles allowed for a phase classification. Compositions were regularly not stoichiometric so most particles were classified as intermediate solid solutions. However, molecular proportions often closely resembled those of bornite, chalcanthite, cuprospinel, covellite, delafossite, diginite, or hydrous ferric oxides. Concentrations of Cu were often 100 % near the center of the particles indicating an inefficient smelting process. Weathering to some degree was common, which in conjunction with the susceptibility of Cu leaching was highly alarming.

Selective accumulation of pharmaceutical residues from 6 different soils by plants: a comparative study on onion, radish, and spinach

The accumulation of six pharmaceuticals of different therapeutic uses has been thoroughly investigated and compared between onion, spinach, and radish plants grown in six soil types. While neutral molecules (e.g., carbamazepine (CAR) and some of its metabolites) were efficiently accumulated and easily translocated to the plant leaves (onion > radish > spinach), the same for ionic (both anionic and cationic) molecules seems to be minor to moderate. The maximum accumulation of CAR crosses 38,000 (onion), 42,000 (radish), and 7000 (spinach) ng g-1 (dry weight) respectively, in which the most majority of them happened within the plant leaves. Among the metabolites, the accumulation of carbamazepine 10,11-epoxide (EPC - a primary CAR metabolite) was approximately 19,000 (onion), 7000 (radish), and 6000 (spinach) ng g-1 (dry weight) respectively. This trend was considerably similar even when all these pharmaceuticals applied together. The accumulation of most other molecules (e.g., citalopram, clindamycin, clindamycin sulfoxide, fexofenadine, irbesartan, and sulfamethoxazole) was restricted to plant roots, except for certain cases (e.g., clindamycin and clindamycin sulfoxide in onion leaves). Our results clearly demonstrated the potential role of this accumulation process on the entrance of pharmaceuticals/metabolites into the food chain, which eventually becomes a threat to associated living biota.

Simultaneous measurement of labile As (III) and As (V) in soils combining DGT and HPLC-ICP-MS

The speciation of arsenic (As) determines its biogeochemistry and ecotoxicity in soils. However, the approach to in situ monitor labile As (III) and As (V) in soils still requires more exploration. In this study, we developed a method for simultaneously obtaining in-situ data on labile As (III) and As (V) in soils using diffusive gradients in thin films (DGT) and high performance liquid chromatography-inductively coupled plasma mass spectrometry. The Fe₂O₃∙xH₂O DGT sampler exhibited rapid and simultaneous accumulation of As (III) and As (V) in solutions within 90 min. The high efficiency of simultaneous elution of As (III) (~84 %) and As (V) (~97 %) was achieved using 0.8 % H₃PO₄ as eluent at 90 °C for 80 min. The method detection limits for As (III) and As (V) were 0.01 and 0.005 μg/L, respectively. This method was applied to reveal the labile As (III) and As (V) in soils in the water level fluctuation zones of the Three Gorges Reservoir, which is the largest reservoir in China. The concentrations of As (III) and As (V) measured by DGT varied with different sampling sites, ranging from 0.01 μg/L to 1.20 μg/L and from 0.01 μg/L to 0.26 μg/L, respectively. The labile As (III) exhibited the higher resupply rate from soil solid phase to soil solution than labile As (V). This study helps to achieve simultaneous in-situ quantification of labile As (III) and As (V) in soils, and will improve the understanding of As mobilization and ecotoxicity in soils.

Genomic and physiological characterization of Novosphingobium terrae sp. nov., an alphaproteobacterium isolated from Cerrado soil containing a mega-sized chromid

A novel bacterial strain, designated GeG2T, was isolated from soils of the native Cerrado, a highly biodiverse savanna-like Brazilian biome. 16S rRNA gene analysis of GeG2T revealed high sequence identity (100%) to the alphaproteobacterium Novosphingobium rosa; however, comparisons with N. rosa DSM 7285T showed several distinctive features, prompting a full characterization of the new strain in terms of physiology, morphology, and, ultimately, its genome. GeG2T cells were Gram-stain-negative bacilli, facultatively anaerobic, motile, positive for catalase and oxidase activities, and starch hydrolysis. Strain GeG2T presented planktonic-sessile dimorphism and cell aggregates surrounded by extracellular matrix and nanometric spherical structures were observed, suggesting the production of exopolysaccharides (EPS) and outer membrane vesicles (OMVs). Despite high 16S rDNA identity, strain GeG2T showed 90.38% average nucleotide identity and 42.60% digital DNA-DNA hybridization identity with N. rosa, below species threshold. Whole-genome assembly revealed four circular replicons: a 4.1 Mb chromosome, a 2.7 Mb extrachromosomal megareplicon, and two plasmids (212.7 and 68.6 kb). The megareplicon contains a few core genes and plasmid-type replication/maintenance systems, consistent with its classification as a chromid. Genome annotation shows a vast repertoire of carbohydrate-active enzymes and genes involved in the degradation of aromatic compounds, highlighting the biotechnological potential of the new isolate. Chemotaxonomic features, including polar lipid and fatty acid profiles, as well as physiological, molecular, and whole-genome comparisons showed significant differences between strain GeG2T and N. rosa, indicating that it represents a novel species, for which the name Novosphingobium terrae is proposed. The type strain is GeG2T (= CBMAI 2313T = CBAS 753 T).

Potential ecological risk and zoning control strategies for heavy metals in soils surrounding core water sources: A case study from Danjiangkou Reservoir, China

Heavy metals in soils can migrate into the food chain and affect human health. In particular, they can be released into water supplies through interactions between soils and water. It is therefore important to study the concentrations of heavy metals in soils surrounding sources of drinking water, but there is a lack of research in this area. A total of 7656 topsoil samples surrounding the core water source of Danjiangkou Reservoir in China were collected and analyzed for As, Hg and Pb. Moran's I index and semivariograms were used to analyze the spatial correlation and variation of these heavy metals. The potential ecological risk index was used to evaluate heavy metal pollution. Fifteen natural and human factors were selected to explore the sources of heavy metal pollution using the GeoDetector model. The positive matrix factorization (PMF) model verified the reasonableness of the main factors identified by the GeoDetector model and further quantified two main sources of soil heavy metals. As, Hg and Pb were enriched to varying degrees in the soils. The potential ecological risk of Hg in soils was the most serious, with 24.67% of the area at high or very high risk. As and Pb both had a low potential ecological risk. The results of GeoDetector model and PMF model showed that the contributions of factor 1 (fertilizer application and automobile exhaust emissions) and factor 2(industrial waste) of soil heavy metal pollution were 49.8% and 50.2%, respectively. At last, the zoning control strategies were proposed in order to provide scientific reference for the management of soil heavy metal pollution.