Sensitive determination of deferasirox in blood of patients with thalassemia using dispersive liquid-liquid microextraction based on solidification of floating organic drop followed by HPLC-UV

Standardization of the analytical procedure based on deep eutectic solvent for the extraction and measurement of tricyclic antidepressants drugs in post-mortem blood samples

Measuring drugs in post-mortem blood samples is one of the most important challenges in forensic medicine. The development of sensitive analytical techniques for the measurement of drugs in biological samples is of great use in forensic medicine. In this research an easy, safe and environmental friendly vortex-assisted liquid phase microextraction (VA-LPME) based on deep eutectic solvent (DES) followed by high performance liquid chromatography-ultraviolet detector (HPLC-UV) was developed for the extraction, preconcentration and analysis of tricyclic antidepressants drugs (TCAs) in post-mortem blood samples. DES synthesized from thymol as hydrogen bond acceptor (HBA) and ethylene glycol (EG) as hydrogen bond donor (HBD) with a molar ratio of 2:1 was used as an extractant. After adding DES to the sample solution, the resulting mixture was vortexed in order to increase the contact surface and increase the extraction efficiency. Next, phase separation was done using centrifugation. Some effective parameters on the extraction were studied and optimized. Under the optimum conditions, intra- and inter-day %RSDs of the method based on 7 replicate measurements of 100 μg L-1 of TCAs in blood samples were in the range of 2.4-5.1 and 3.7-6.8 %, respectively. The analytical performance of the method showed linearity over the concentration of 3-500 μg L-1 with the detection limits ranging from 1.0-2.0 μg L-1. The trueness of the method was confirmed by spiking different concentrations of TCAs in real blood samples and obtaining relative recoveries in the range of 91.2-108 %.

Recent Advances in Dispersive Liquid-Liquid Microextraction for Pharmaceutical Analysis

Sample clean-up and pre-concentration are critical components of pharmaceutical analysis. The dispersive liquid-liquid microextraction (DLLME) technique is widely recognized as the most effective approach for enhancing overall detection sensitivity. While various DLLME modes have been advanced in pharmaceutical analysis, there need to be more discussions on pre-concentration techniques specifically developed for this field. This review presents a comprehensive overview of the different DLLME modes used in pharmaceutical analysis from 2017 to May 2023. The review covers the principles of DLLME, the factors affecting microextraction, the selected applications of different DLLME modes, and their advantages and disadvantages. Additionally, it focuses on multi-extraction strategies employed for pharmaceutical analysis.

Combination of smartphone digital image colorimetry and UV-Vis spectrophotometry as detection systems with solidified floating organic drop microextraction as preconcentration method for the quantification of methyl red in wastewater samples

In this study, a portable smartphone-based digital image colorimetric system (SDIC) was designed and integrated with a solidified floating organic drop microextraction method (SFODME) for the quantification of methyl red in textile wastewater samples. The RGB (red, green, and blue) data were evaluated for each captured image, and the green channel was selected for quantification due to its linear response for the analyte. Under optimal conditions, an acceptable linear range was recorded for the analyte. The proposed method recorded a limit of detection (LOD) value of 0.046 mg/L. The developed microextraction method was also combined with UV-Vis spectrophotometry, which recorded an LOD value of 0.012 mg/L. Real sample analysis was carried out with textile wastewater samples to check the applicability/accuracy of the developed method, using a matrix matching calibration strategy to enhance quantification accuracy. Satisfactory percent recoveries in the range of 93.3%-114.3% and 92%-92.7% were recorded for the SFODME-SDIC and SFODME-UV methods, respectively.

Overview of Different Modes and Applications of Liquid Phase-Based Microextraction Techniques

Liquid phase-based microextraction techniques (LPµETs) have attracted great attention from the scientific community since their invention and implementation mainly due to their high efficiency, low solvent and sample amount, enhanced selectivity and precision, and good reproducibility for a wide range of analytes. This review explores the different possibilities and applications of LPμETs including dispersive liquid–liquid microextraction (DLLME) and single-drop microextraction (SDME), highlighting its two main approaches, direct immersion-SDME and headspace-SDME, hollow-fiber liquid-phase microextraction (HF-LPME) in its two- and three-phase device modes using the donor–acceptor interactions, and electro membrane extraction (EME). Currently, these LPμETs are used in very different areas of interest, from the environment to food and beverages, pharmaceutical, clinical, and forensic analysis. Several important potential applications of each technique will be reported, highlighting its advantages and drawbacks. Moreover, the use of alternative and efficient “green” extraction solvents including nanostructured supramolecular solvents (SUPRASs, deep eutectic solvents (DES), and ionic liquids (ILs)) will be discussed.

Green Extraction Techniques as Advanced Sample Preparation Approaches in Biological, Food, and Environmental Matrices: A Review

Green extraction techniques (GreETs) emerged in the last decade as greener and sustainable alternatives to classical sample preparation procedures aiming to improve the selectivity and sensitivity of analytical methods, simultaneously reducing the deleterious side effects of classical extraction techniques (CETs) for both the operator and the environment. The implementation of improved processes that overcome the main constraints of classical methods in terms of efficiency and ability to minimize or eliminate the use and generation of harmful substances will promote more efficient use of energy and resources in close association with the principles supporting the concept of green chemistry. The current review aims to update the state of the art of some cutting-edge GreETs developed and implemented in recent years focusing on the improvement of the main analytical features, practical aspects, and relevant applications in the biological, food, and environmental fields. Approaches to improve and accelerate the extraction efficiency and to lower solvent consumption, including sorbent-based techniques, such as solid-phase microextraction (SPME) and fabric-phase sorbent extraction (FPSE), and solvent-based techniques (μQuEChERS; micro quick, easy, cheap, effective, rugged, and safe), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), in addition to supercritical fluid extraction (SFE) and pressurized solvent extraction (PSE), are highlighted.

Sensitive determination of vincristine in plasma of children with leukaemia using vortex-assisted dispersive liquid-liquid microextraction based on hydrophobic deep eutectic solvent

Vincristine has a wide spectrum of clinical activity and is currently used in the treatment of leukemia. Despite its high therapeutic properties, vincristine has common side effects. Accordingly, it is desirable to determine vincristine in plasma for the use of the drug with strict monitoring. In the present research, for the first time a hydrophobic deep eutectic solvent (DES) composed of methyltrioctylammonium chloride (MTOAC) and n-butanol in a molar ratio of 1 : 3 was used as the extractant in dispersive liquid–liquid microextraction (DLLME) for the extraction and determination of vincristine in the plasma of children with leukemia prior to its analysis by high-performance liquid chromatography-ultraviolet detection (HPLC-UV). Under optimal experimental conditions, the method showed good linearity with a correlation coefficient (R²) of 0.9986 in the linear range of 0.06–300 μg L⁻¹, low limit of detection of 0.02 μg L⁻¹ and acceptable extraction efficiency (EE) of 88.4%. In the final stage of the study, this proposed technique was successfully applied to determine vincristine in real plasma, and the obtained results demonstrated the ability of the synthesized DES to extract drugs from biological fluids.

Vincristine has a wide spectrum of clinical activity and is currently used in the treatment of leukemia.

Strategies of dispersive liquid-liquid microextraction for coastal zone environmental pollutant determination

Coastal zone means the interface of land and sea, and therefore, environmental pollutants steaming from land-based activities (like manufactories) and sea-based activities (like shipping) are all existing in coastal zone. These pollutants usually have characteristics of low residues, complicated matrices, easy accumulation and so on, causing difficulty to detect coastal pollutants quickly and sensitively. It is imperative to perform effective sample preparation prior to instrumental analysis. Dispersive liquid-liquid microextraction (DLLME) has attracted significant research interest for sample preparation, owing to its high enrichment ability, low reagent/sample consumption, and wide analyte/matrix applicability, as well as robustness, simplicity, rapidity and inexpensiveness. Herein, we comprehensively review the recent advancements of DLLME technology and its analytical parameters including enrichment principles, extraction modes, and practical application; the emphasis is on novel mode-construction and representative coastal-environmental pollutants extraction. Construction strategies are highlighted by classifying DLLME into five major modes, according to extractant's types, including normal ones, low density solvents, ionic liquids, deep eutectic solvents and others. The coupling of DLLME with other extraction techniques like solid-phase extraction is also briefly introduced. The strengths and weaknesses of each strategy and its rationality are also elaborated. In addition, some typical applications of the different DLLME modes for the determination of organic compounds and heavy metals in coastal water, sediment, soil, and biota are summarized. The increasingly concerned green aspects and instrumentation of DLLME are presented, and finally, the challenges and perspectives of the DLLME for environmental analysis are proposed.

Ratiometric fluorescence assay based on carbon dots and Cu2+-catalyzed oxidation of O-phenylenediamine for the effective detection of deferasirox

The monitoring of deferasirox (DEF) has important clinical roles in patients who need iron excretion. However, analytical methods with practicability and simplicity are limited. Moreover, ratiometric fluorescence strategies based on Förster resonance energy transfer (FRET) from carbon dots (CDs) as a donor are rarely reported as a drug monitor. In this work, CDs with an appropriate emitting wavelength at 480 nm and excitation around 370 nm were prepared by hydrothermal approach and HCl post-treatment. O-Phenylenediamine (OPD) can be oxidized by Cu²⁺ to produce yellow fluorescent 2,3-diaminophenazine (oxOPD) in the system of Cu²⁺ and OPD (Cu–OPD). Correspondingly, a remarkable FRET from CDs to oxOPD in the system of CDs, Cu²⁺ and OPD (CDs–Cu–OPD) was fabricated with the quenching illustration of CDs, but emitting property of oxOPD. Attributed to the chelation ability of DEF on Cu²⁺, the inhibitory effects of DEF on the Cu²⁺-triggered oxidative capability reduced the FRET system by the decreased oxOPD. Thus, the recovered CDs at F₄₈₀ and decreased oxOPD at F₅₆₀ were found through a ratiometric mode by the addition of DEF in CDs–Cu–OPD for the DEF assay. The FRET behavior of CDs and oxOPD in CDs–Cu–OPD was proved clearly through the calculation of the association constant, binding constant, number of binding sites, and the distance between the donor and acceptor. Furthermore, this ratiometric method exhibited promising analytical performance for DEF with the application in real samples. The implementation of this work expands the application field of CDs and OPD oxidation in drug monitoring, and even other biological analyses through ratiometric strategy.

CDs with appropriate emission property interacted with Cu²⁺-catalyzed oxidation of OPD to form a ratiometric fluorescence strategy for deferasirox (DEF) detection.