Preparation of carbon dots-hematite quantum dots-loaded hydroxypropyl cellulose-chitosan nanocomposites for drug delivery, sunlight catalytic and antimicrobial application

Okra peel-derived nitrogen-doped carbon dots: Eco-friendly synthesis and multi-functional applications in heavy metal ion sensing, nitro compound detection and environmental remediation

The present study explores the kitchen waste okra peels derived synthesis of nitrogen doped carbon dots (N-CDs) via simple carbonization followed by reflux method. The synthesized N-CDs was characterized using, TEM, XPS, FTIR, XRD, Raman, UV-Visible and Fluorescence Spectroscopy. The N-CDs emits bright blue emission at 420 nm with 12 % of quantum yield as well as it follows excitation dependent emission. Further, the N-CDs were employed as a fluorescence sensor for detection of hazardous metal ions and nitro compounds. Among various metal ions and nitro compounds, the N-CDs shows fluorescence quenching response towards Cr6+, and Mn7+ metal ions as well as 4-nitroaniline (4-NA) and picric acid (PA) with significant hypsochromic and bathochromic shift for Mn7+, 4-NA and PA respectively. The developed fluorescent probe shows relatively low limit of detection (LOD) of 1.46 µg/mL, 1.05 µg/mL, 2.1 µg/mL and 2.2 µg/mL for the above analytes respectively. The N-CDs did not show any significant interference with coexisting ions and successfully applied for real water sample analysis. In addition, circular economy approach was employed for adsorption of dyes by reactivating leftover waste carbon residue which was obtained after reflux. Thus, the kitchen waste valorization and circular economy approach based N-CDs have potential applications in the field of detection of emerging pollutants, and environmental remediation.

Recent advances in biomedical applications of carbon and graphene quantum dots: A review

The carbon-based nanostructures have led to the development of theranostic nanoplatforms for simultaneous diagnosis and therapy due to their effective cell membrane-penetration ability, low degree of cytotoxicity, excellent pore volume, substantial chemical stability, and reactive surface. In the last few years, extensive efforts were made to design multifunctional nanoplatform strategies based on carbon nanostructures, involving multimodal imaging, controlled drug release capabilities, sensing in vitro, efficient drug loading capacity, and therapy. Carbon and graphene quantum dots (CQDs and GQDs) were the recent entrants, contingently being assessed for drug delivery and bioimaging. With the advancements, these quantum dots have ignited remarkable research interest and are now widely evaluated for diagnosis, bioimaging, sensing, and drug delivery applications. The last decade has witnessed their remarkable electrical, optical, and biocompatible properties since their inception. It is presumed that both of them have high potential as drug carriers and would serve as the next generation of approaches to address numerous unresolved therapeutic challenges. This review examined the recent advances of CQD and GQD based drug delivery applications, challenges, and future perspectives to pave the way for further studies in the future.

Antibacterial potentials of carbon dots immobilized on chitosan and glass surfaces

Due to their antibacterial activity, chitosan‑carbon dot composites possess great potential for pharmaceuticals, medicine, and food preservation. Conducting a comprehensive study of the interactions between chitosan, carbon dots, and bacteria is crucial to understanding the processes behind applying these composites. This study aimed to immobilize carbon dots (C-dots) synthesized from Elaeagnus angustifolia fruits on chitosan and glass microbeads' surfaces, to characterize the test materials obtained after synthesis and immobilization, and to investigate their antibacterial potentials. C-dot synthesis was carried out from water extract in an acidic medium with the help of microwave irradiation, and their structural and optical properties were characterized by TEM, XRD, FT-IR, UV-vis, Zeta potential, and fluorescence methods. The surface of the glass microbeads was first activated and functionalized with surface amine groups with a silaning agent. C-dots were immobilized on both glass and chitosan microbeads using a crosslinking agent. Antibacterial potentials of nine different test materials, obtained before or after immobilization, were evaluated both qualitatively (MIC and MBC) and quantitatively (GI50) on E. coli, S. typhimurium, B. subtilis, and S. aureus, with the standard broth microdilution method. FT-IR and SEM-EDX analyses showed that C-dots were immobilized on chitosan (˂1 mm) and glass (˂100 μm) microbead surfaces. C-dots reduced the cell viability by ~25 % on S. typhimurium and B. subtilis (MIC = 25 mg/mL). It was also found that the highest antibacterial effect was recorded for C-dots-glass microbeads, which had a toxic effect of 43 % on S. aureus. In addition, binding C-dots to glass microbeads increased the antibacterial effect selectively in Gram-positive bacteria, while binding to chitosan microbeads was effective in all bacteria. The study showed that the antibacterial potential of C-dots-chitosan microbeads is more effective than C-dots-glass microbeads. C-dots could be used as carbon-based nanomaterials in antibacterial surface preparation once immobilized.

Progress on quantum dot photocatalysts for biomass valorization

Biomass with abundant reproducible carbon resource holds great promise as an intriguing substitute for fossil fuels in the manufacture of high-value-added chemicals and fuels. Photocatalytic biomass valorization using inexhaustible solar energy enables to accurately break desired chemical bonds or selectively functionalize particular groups, thus emerging as an extremely creative and low carbon cost strategy for relieving the dilemma of the global energy. Quantum dots (QDs) are an outstandingly dynamic class of semiconductor photocatalysts because of their unique properties, which have achieved significant successes in various photocatalytic applications including biomass valorization. In this review, the current development rational design for QDs photocatalytic biomass valorization effectively is highlighted, focusing on the principles of tuning their particle size, structure, and surface properties, with special emphasis on the effect of the ligands for selectively broken chemical bonds (C─O, C─C) of biomass. Finally, the present issues and possibilities within that exciting field are described.

Photodynamic antibacterial chitosan/nitrogen-doped carbon dots composite packaging film for food preservation applications

In this study, we synthesized nitrogen-doped carbon dots (N-CDs) with remarkable photodynamic antibacterial properties by a hydrothermal method. The composite film was prepared by solvent casting method, compounding N-CDs with chitosan (CS). The morphology and structure of the films were analyzed by Fourier-transformed infrared spectroscopy (FTIR), scanning electron microscope (SEM), atomic force microscope (AFM), and transmission electron microscope (TEM) techniques. The films' mechanical, barrier, thermal stability, and antibacterial properties were analyzed. A preservation test of the films was studied on the samples of pork, volatile base nitrogen (TVB-N), total viable count (TVC), and pH were determined. Besides, the effect of film on the preservation of blueberries was observed. The study found that, compared with the CS film, the CS/N-CDs composite film is strong and flexible, with good UV light barrier performance. The prepared CS/7 % N-CDs composites showed high photodynamic antibacterial rates of 91.2 % and 99.9 % for E. coli and S. aureus, respectively. In the preservation of pork, it was found that its pH, TVB-N, and TVC indicators were significantly lower. The extent of mold contamination and anthocyanin loss was less in the CS/3 % N-CDs composite film-coated group, which could greatly extend the shelf life of food.

Green synthetic natural carbon dots derived from Fuligo Plantae with inhibitory effect against alcoholic gastric ulcer

Introduction: Fuligo Plantae (FP), the ash that sticks to the bottom of pots or chimneys after weeds burn, has long been used for its hemostatic effects and treatment of gastrointestinal bleeding. Nevertheless, the active ingredient of FP still needs to be further explored. Methods: The microstructure, optical and chemical properties of FP-CDs were characterized. An alcohol-induced gastric ulcer model was utilized to evaluate whether pre-administration of FP-CDs alleviated gastric bleeding symptoms and ameliorated gastric mucosal barrier disruption. In addition, the feces of each group of rats were extracted for 16S rDNA genome sequencing of intestinal flora. Results: FP-CDs with a diameter ranging from 1.4-3.2 nm had abundant chemical groups, which may be beneficial to the exertion of inherent activity. FP-CDs alleviated alcohol-induced gastric ulcer, as demonstrated by activating the extrinsic coagulation pathway, alleviating inflammation, and suppressing oxidative stress levels. More interestingly, FP-CDs can improve the diversity and dysbiosis of intestinal flora in rats with alcohol-induced gastric ulcer. Conclusion: These comes about illustrate the momentous inhibitory effects of FP-CDs on alcoholic gastric ulcer in rats, which give a modern methodology for investigating the effective ingredient of FP, and lay an experimental basis for the application of FP-CDs in the clinical treatment of alcoholic gastric ulcer.

Biotechnological advancements towards water, food and medical healthcare: A review

The global health status is highly affected by the growing pace of urbanization, new lifestyles, climate changes, and resource exploitation. Modern technologies pave a promising way to deal with severe concerns toward sustainable development. Herein, we provided a comprehensive review of some popular biotechnological advancements regarding the progress achieved in water, food, and medicine, as the most substantial fields related to public health. The emergence of novel organic/inorganic materials has brought about significant improvement in conventional water treatment techniques, anti-fouling approaches, anti-microbial agents, food processing, biosensors, drug delivery systems, and implants. Particularly, a growing interest has been devoted to nanomaterials and their application for developing novel structures or improving the characteristics of standard components. Also, bioinspired materials have been widely used to improve the performance, efficiency, accuracy, stability, safety, and cost-effectiveness of traditional systems. On the other side, the fabrication of innovative devices for precisely monitoring and managing various ecosystem and human health issues is of great importance. Above all, exceptional advancements in designing ion-selective electrodes (ISEs), microelectromechanical systems (MEMs), and implantable medical devices have altered the future landscape of environmental and biomedical research. This review paper aimed to shed light on the wide-ranging materials and devices that have been developed for health applications and mainly focused on the impact of nanotechnology in this field.

Construction of mitochondria targeted and FRET based ratiometric sensing nanoplatform for sulfur dioxide accurate detection in vitro and in vivo

Sulfur dioxide (SO₂) is a key molecule in organisms that is involved in the regulation of different physiological procedures. Aberrant SO₂ causes a variety of diseases, such as cancer and neurodegeneration. Thus, sensitive and selective detection of SO₂ is of great importance. Based on the Förster resonance energy transfer (FRET) between green fluorescence carbon dots (GCDs) donor and amide-linked near-infrared fluorescence emissive organic small molecular dye (CDDBT) acceptor, one ratiometric fluorescent nano platform, Mito-GCDs-CDDBT for mitochondria SO₂ sensing was constructed. In this FRET sensing system, CDDBT served as the receptor for SO₂, and the presence of SO₂ enhanced GCDs green fluorescence signal and quenched CDDBT near-infrared fluorescence signal due to the disruption of FRET. Mito-GCDs-CDDBT could sensitively detect SO₂ with a detection limit of as low as 0.701 μM. Meanwhile, Mito-GCDs-CDDBT achieved fluorescence imaging to measure the response of cellular exogenous and endogenous SO₂ with remarkable mitochondrial targeting. Moreover, Mito-GCDs-CDDBT also realized SO₂ sensing in vivo including zebrafish and mice. The as-prepared versatile nanoplatform displayed several advantages, such as mitochondria targeting, FRET-based sensitive detection, and sensing capabilities in biological milieu. Potentially, it could be applied in the diagnostics of SO₂ involved diseases.

Preparation of Nitrogen and Sulfur Co-Doped Fluorescent Carbon Dots from Cellulose Nanocrystals as a Sensor for the Detection of Rutin

The poor water solubility, large particle size, and low accessibility of cellulose, the most abundant bioresource, have restricted its generalization to carbon dots (CDs). Herein, nitrogen and sulfur co-doped fluorescent carbon dots (N, S-CDs) were hydrothermally synthesized using cellulose nanocrystals (CNC) as a carbon precursor, exhibiting a small particle size and excellent aqueous dispersion. Thiourea was selected as a nitrogen and sulfur dopant to introduce abundant fluorescent functional groups into N, S-CDs. The resulting N, S-CDs exhibited nanoscale size (6.2 nm), abundant functional groups, bright blue fluorescence, high quantum yield (QY = 27.4%), and high overall yield (16.2%). The excellent optical properties of N, S-CDs endowed it to potentially display a highly sensitive fluorescence "turn off" response to rutin. The fluorescence response for rutin allowed a wide linear range of 0-40 mg·L^-1, with a limit of detection (LOD) of 0.02 μM, which revealed the potential of N, S-CDs as a rapid and simple sensing platform for rutin detection. In addition, the sustainable and large-scale production of the N, S-CDs in this study paves the way for the successful high-value utilization of cellulose.

Carbon Dots for Killing Microorganisms: An Update since 2019

Frequent bacterial/fungal infections and occurrence of antibiotic resistance pose increasing threats to the public and thus require the development of new antibacterial/antifungal agents and strategies. Carbon dots (CDs) have been well demonstrated to be promising and potent antimicrobial nanomaterials and serve as potential alternatives to conventional antibiotics. In recent years, great efforts have been made by many researchers to develop new carbon dot-based antimicrobial agents to combat microbial infections. Here, as an update to our previous relevant review (C 2019, 5, 33), we summarize the recent achievements in the utilization of CDs for microbial inactivation. We review four kinds of antimicrobial CDs including nitrogen-doped CDs, metal-containing CDs, antibiotic-conjugated CDs, and photoresponsive CDs in terms of their starting materials, synthetic route, surface functionalization, antimicrobial ability, and the related antimicrobial mechanism if available. In addition, we summarize the emerging applications of CD-related antimicrobial materials in medical and industry fields. Finally, we discuss the existing challenges of antimicrobial CDs and the future research directions that are worth exploring. We believe that this review provides a comprehensive overview of the recent advances in antimicrobial CDs and may inspire the development of new CDs with desirable antimicrobial activities.

Facile and Green Synthesis of Highly Fluorescent Carbon Quantum Dots from Water Hyacinth for the Detection of Ferric Iron and Cellular Imaging

Natural biomass is used for facile synthesis of carbon quantum dots (CQDs) with high fluorescence, owing to its abundance, low cost, and eco-friendliness. In this study, a bottom-up hydrothermal method was used to prepare CQDs from water hyacinth (wh) at a constant temperature of 180 °C for 12 h. The synthesized wh-CQDs had uniform size, amorphous graphite structure, high water solubility (containing multiple hydroxyl and carboxyl groups on the surface), excitation light-dependent characteristics, and high photostability. The results showed that the aqueous solution of CQDs could detect Fe³⁺ rapidly, sensitively, and highly selectively with a detection limit of 0.084 μM in the linear range of 0–330 μM, which is much lower than the detection limit of 0.77 μM specified by the World Health Organization. More importantly, because the wh-CQDs were synthesized without any additives, they exhibited low toxicity to Klebsiella sp. cells even at high concentrations. Moreover, wh-CQDs emitted bright blue fluorescence in Klebsiella sp. cells, indicating its strong penetrating ability. Correspondingly, the fluorescent cell sorting results also revealed that the proportion of cell internalization reached 41.78%. In this study, wh-CQDs derived from natural biomass were used as high-performance fluorescent probes for Fe³⁺ detection and Klebsiella sp. imaging. This study is expected to have great significance for the application of biomass carbon spots in the field of cellular imaging and biology.

In-silico identification of lysine residue for α-Amylase immobilization on dialdehyde cellulose

Enzymes are the precious gift of nature to humans. The wise utilization of enzymes may reduce energy needs of humans and the Immobilization technique can help a lot in this regard. This aspect overcomes limitations of the enzymes, therefore providing an opportunity to explore enzymatic chemistry further. In the present context, it is quite cumbersome & costly to identify the amino acid of enzymes involved in the covalent mode of Immobilization. In the present study, molecular modeling techniques were used to do this difficult task. The present work used molecular modeling methods to extract information about the immobilization of α-Amylase (E.C.3.2.1.1) on Dialdehyde Cellulose. The Lysine residue is the most probable residue to interact with Dialdehyde Cellulose. In the present work, a total of 23 lysine residues were used to study covalent binding behavior with α-Amylase. It was found that if Lys142 is involved in binding with Dialdehyde Cellulose then binding affinity (-6.1 & -5.9 kcal mol-1), as well as the involvement of amino acids of both free α-Amylase and Lys142 immobilized α-Amylase with the starch substrate, were found to be similar. The technique reported here is used for the identification of amino acid residue for the Immobilization of enzymes.

Engineered magnetic oxides nanoparticles as efficient sorbents for wastewater remediation: a review

The rapid urbanization and industrialization is causing worldwide water pollution, calling for advanced cleaning methods. For instance, pollutant adsorption on magnetic oxides is efficient and very practical due to the easy separation from solutions by an magnetic field. Here we review the synthesis and performance of magnetic oxides such as iron oxides, spinel ferrites, and perovskite oxides for water remediation. We present structural, optical, and magnetic properties. Magnetic oxides are also promising photocatalysts for the degradation of organic pollutants. Antimicrobial activities and adsorption of heavy metals and radionucleides are also discussed.

A novel SPR based Fe@Ag core-shell nanosphere entrapped on starch matrix an optical probe for sensing of mercury(II) ion: A nanomolar detection, wide pH range and real water sample application

Recent trends in nanotechnology paved a way for the development of detection systems for heavy metals, toxins and environmental pollutants. The present study focused on Hg²⁺ detection by a core shell Fe@Ag-starch nanosphere phenylalanine conjugate. The characterization of core shell Fe@Ag-starch nanosphere was performed by using TEM, zetasizer, particlesize analyzer, UV-visible absorption spectrophotometer, EDAX, FTIR and TGA. The NPs showed λmax at 408 nm. The effective diameter of synthesized nanosphere was 37 ± 2 nm and it possessed the surfaces charge of -36.12 ± 2.5 mV. The Fe@Ag-starch-phenylalanine conjugate reacted with Hg²⁺, the yellow colour of the nanosphere phenylalanine conjugate became colourless. The real water sample was collected and the amount of Hg²⁺ was calculated by using the prepared nanosphere. The detection of Hg²⁺ at different conditions including various saline concentrations, temperature and pH were also studied and the detection was found to be effective at 40 °C, pH 5 and 0.1% of saline concentration. The LOD of Hg²⁺ ions by Fe@Ag-starch nanosphere were calculated to be 1.84 nM. The influence of other metal ions present in the analyte did not show any interference on Hg²⁺ detection. In addition, the photocatalytic and antibacterial activities of Fe@Ag-starch nanosphere were also studied. The study confirmed that the core shell nanosphere can also be used for environmental cleanup and disinfection.

Cellulosic Polymers for Enhancing Drug Bioavailability in Ocular Drug Delivery Systems

One of the major impediments to drug development is low aqueous solubility and thus poor bioavailability, which leads to insufficient clinical utility. Around 70–80% of drugs in the discovery pipeline are suffering from poor aqueous solubility and poor bioavailability, which is a major challenge when one has to develop an ocular drug delivery system. The outer lipid layer, pre-corneal, dynamic, and static ocular barriers limit drug availability to the targeted ocular tissues. Biopharmaceutical Classification System (BCS) class II drugs with adequate permeability and limited or no aqueous solubility have been extensively studied for various polymer-based solubility enhancement approaches. The hydrophilic nature of cellulosic polymers and their tunable properties make them the polymers of choice in various solubility-enhancement techniques. This review focuses on various cellulose derivatives, specifically, their role, current status and novel modified cellulosic polymers for enhancing the bioavailability of BCS class II drugs in ocular drug delivery systems.

Carbon Dots as an Emergent Class of Antimicrobial Agents

Antimicrobial resistance is a recognized global challenge. Tools for bacterial detection can combat antimicrobial resistance by facilitating evidence-based antibiotic prescribing, thus avoiding their overprescription, which contributes to the spread of resistance. Unfortunately, traditional culture-based identification methods take at least a day, while emerging alternatives are limited by high cost and a requirement for skilled operators. Moreover, photodynamic inactivation of bacteria promoted by photosensitisers could be considered as one of the most promising strategies in the fight against multidrug resistance pathogens. In this context, carbon dots (CDs) have been identified as a promising class of photosensitiser nanomaterials for the specific detection and inactivation of different bacterial species. CDs possess exceptional and tuneable chemical and photoelectric properties that make them excellent candidates for antibacterial theranostic applications, such as great chemical stability, high water solubility, low toxicity and excellent biocompatibility. In this review, we will summarize the most recent advances on the use of CDs as antimicrobial agents, including the most commonly used methodologies for CD and CD/composites syntheses and their antibacterial properties in both in vitro and in vivo models developed in the last 3 years.