Synthesis of highly active H2O2-sensitized sulfated titania nanoparticles with a response to visible light

Development and testing of alginate/C3N4porphyrin bead as a self-initiated Fenton photocatalyst for highly efficient atrazine removal

Fenton reaction has been widely used for efficient treatment of organic wastewater. However, its applications are limited by such key factors as pH < 3. In this study, we developed, tested, and optimized an alginate/C3N4porphyrin bead (C3N4por-SA) as a recyclable photocatalyst in a photocatalysis-self-Fenton process to overcome these limitations. Porphyrin-modified C3N4 (C3N4por) was used as the H2O2 donator, while Fe(III) nodes served as the Fenton reagent. The as-prepared floating alginate/C3N4por bead utilized the light source as a driving force for the catalysis. Under visible light irradiation for 6 h, the model pollutant atrazine was degraded by 70.96 % by the optimized photocatalyst (named as C3N4por-SA-Fe1Ca5), demonstrating better photocatalytic performance than alginate/C3N4 beads. This improvement was attributed to the higher H2O2 yield from C3N4por. The alginate/C3N4por bead showed better photocatalytic activity even after several consecutive cycles and could easily be recovered for reuse. Furthermore, Fe(III)/Ca(II) bimetallic alginate bead exhibited better photocatalytic activity and a higher content of •OH radicals than the Ca(II) monometallic alginate beads, due to the ability of Fe(III) nodes to serve as a Fenton reagent. The influences of light sources, and commonly existing matters (namely SO42-, Cl-, CO32-, NO3-, and humic acid) were investigated. Moreover, the alginate/C3N4por bead demonstrated good photocatalytic performance in a simulated natural environment without the addition of extra H2O2, with an atrazine removal percentage of up to 96.3 % after 3-h irradiation. These findings indicated the great potential of alginate/C3N4por bead in practical applications.

Integrated in situ spectroscopic studies on syngas production from partial oxidation of methane catalyzed by atomically dispersed rhodium cations on ceria

Catalytic reforming of methane to produce syngas is an important strategy for producing value-added chemicals. The conventional reforming catalyst relies on supported nickel nanoparticles. In this work, we investigated singly dispersed Rh cations anchored on a CeO₂ catalyst (Rh₁/CeO₂) for high activity and selectivity towards the production of syngas via partial oxidation of methane (POM) in the temperature range of 600-700 °C. The yields of H₂ and CO at 700 °C are 83% and 91%, respectively. The anchored Rh₁ atoms on CeO₂ of Rh₁/CeO₂ are in the cationic state, and on an average each Rh₁ atom coordinates with 4-5 surface lattice oxygen atoms of CeO₂. Compared to inert CeO₂ for POM, via the incorporation of single-atom sites, Rh₁ modifies the electronic state of oxygen atoms proximal to the Rh₁ atoms and thus triggers the catalytic activity of CeO₂. The high activity of single-atom catalyst Rh₁/CeO₂ suggests that the incorporation of single atoms of transition metals to the surface of a reducible oxide can modulate the electronic state of proximal anions of the oxide support toward forming an electronic state favorable for the selective formation of ideal products.

Structure-sensitive epoxidation of dicyclopentadiene over TiO2 catalysts

Epoxidation of dicyclopentadiene (DCPD) is studied on a series of TiO₂ catalysts using hydrogen peroxide as an oxidant. DCPD derivatives have applications in several areas including polymer, pharmaceutical and pesticide products. The control of selectivity leading to the desired product is important for many of these applications. Using experimental and computational studies, we show that the surface crystalline phases of TiO₂ play crucial roles not only in the formation of peroxo species but also in the selective epoxidation of two different CC double bonds in DCPD.

Photocatalytic Investigation of Aerosol-Assisted Atmospheric Pressure Plasma Deposited Hybrid TiO2 Containing Nanocomposite Coatings

We report on the aerosol-assisted atmospheric-pressure plasma deposition onto a stainless-steel woven mesh of a thin nanocomposite coating based on TiO2 nanoparticles hosted in a hybrid organic−inorganic matrix, starting from nanoparticles dispersed in a mixture of hexamethyldisiloxane and isopropyl alcohol. The stainless-steel mesh was selected as an effective support for the possible future technological application of the coating for photocatalytically assisted water depollution. The prepared coatings were thoroughly investigated from the chemical and morphological points of view and were demonstrated to be photocatalytically active in the degradation of an organic molecule, used as a pollutant model, in water upon UV light irradiation. In order to optimize the photocatalytic performance, different approaches were investigated for the coating’s realization, namely (i) the control of the deposition time and (ii) the application of a postdeposition O2 plasma treatment on the pristine coatings. Both strategies were found to be able to increase the photocatalytic activity, and, remarkably, their combination resulted in a further enhancement of the photoactivity. Indeed, the proposed combined approach allowed a three-fold increase in the kinetic constant of the degradation reaction of the model dye methylene blue with respect to the pristine coating. Interestingly, the chemical and morphological characterizations of all the prepared coatings were able to account for the enhancement of the photocatalytic performance. Indeed, the presence of the TiO2 nanoparticles on the outmost surface of the film confirmed the accessibility of the photocatalytic sites in the nanocomposite and reasonably explained the enhanced photocatalytic performance. In addition, the sustained photoactivity (>5 cycles of use) of the nanocomposites was demonstrated.

Mechanism study on TiO2 inducing O2- and OH radicals in O3/H2O2 system for high-efficiency NO oxidation

To achieve high NO oxidation efficiency, excessive O₃ must be used, which would lead to the high cost and escape of ozone. Herein, we adopted low cost and environmental-friendly TiO₂ as the catalyst of low concentration O₃ and H₂O₂ system for high-efficiency NO_x oxidation. The Ti sites on TiO₂ were the deprotonation sites of H₂O₂ and H₂O into Ti-OOH and Ti-OH species, respectively. We found that the surface of rutile phase TiO₂ had a low concentration Ti-OOH component but a large amount of Ti-OH after contacting with H₂O₂ solution, thus lots of ·OH and a few O₂^- radicals formed with introducing O₃ molecules. H₂O₂ solution induced the formation of a large amount of Ti-OOH and Ti-OH species on the anatase phase TiO₂ surface, thus lots of O₂^- generated in the O₃/H₂O₂ system. O₂^- and OH radicals could efficiently oxidize NO, in which O₂^- radicals could oxidize NO to NO₃^- in one step with high selectively. Therefore, anatase TiO₂ had better performance in NO_x oxidation than rutile phase TiO₂. The effect of temperature and SO₂ concentration on NO oxidation was also investigated, the results showed that TiO₂-A/O₃/H₂O₂ system promoted NO oxidation at a low temperature and a low concentration of SO₂.

One-step hydrothermal synthesis of N/Ti3+ co-doping multiphasic TiO2/BiOBr heterojunctions towards enhanced sonocatalytic performance

N/Ti³⁺ co-doping multiphasic TiO₂/BiOBr heterojunctions (NT-TBx) were prepared by one-step in situ hydrothermal processes. The crystal phase, morphology, component, and optical properties of the heterojunctions were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, X-ray photoelectron spectroscopy, and Ultraviolet-visible diffuse reflectance spectroscopy techniques, respectively. The as-prepared samples exhibit better sonocatalytic activity for the degradation methylene blue, Rhodamine B, and p-Nitrophenol aqueous solution compared with pristine TiO₂ and N/Ti³⁺ co-doping multiphasic TiO₂. Especially, the highest degradation ratio of methylene blue was achieved for NT-TB_0.3 up to 98.2% after 50 min under ultrasonic irradiation. The high sonocatalytic activity has been kept after four cycles with the tiny decline, indicating the excellent stability of the as-prepared samples. The improvement of sonocatalytic activity could be attributed to the formation of doping level and multiphasic TiO₂/BiOBr heterojunctions, which account for the absorption of long wavelength light and the electron-hole pair separation, respectively. Furthermore, superoxide radical (O₂^-) was demonstrated to be the main reactive species for the degradation of methylene blue under ultrasonic irradiation. This study provides a facile fabrication procedure for N/Ti³⁺ co-doping multiphasic TiO₂/BiOBr heterojunctions and demonstrates an efficient route to promote the application of TiO₂ in addressing environment-related issues.

Transparent Nb-doped TiO2 films with the [001] preferred orientation for efficient photocatalytic oxidation performance

[001]-Oriented Nb-TiO₂ films via topotactic transformation from [100]-oriented Nb-TiN exhibit efficient photoactivity due to highly-reactive-facet exposure and increased surface-reactive sites.

Characterization of titanium dioxide nanoparticles modified with polyacrylic acid and H2O2 for use as a novel radiosensitizer

An induction of polyacrylic acid-modified titanium dioxide with hydrogen peroxide nanoparticles (PAA-TiO₂/H₂O₂ NPs) to a tumor exerted a therapeutic enhancement of X-ray irradiation in our previous study. To understand the mechanism of the radiosensitizing effect of PAA-TiO₂/H₂O₂ NPs, analytical observations that included DLS, FE-SEM, FT-IR, XAFS, and Raman spectrometry were performed. In addition, highly reactive oxygen species (hROS) which PAA-TiO₂/H₂O₂ NPs produced with X-ray irradiation were quantified by using a chemiluminescence method and a EPR spin-trapping method. We found that PAA-TiO₂/H₂O₂ NPs have almost the same characteristics as PAA-TiO₂. Surprisingly, there were no significant differences in hROS generation. However, the existence of H₂O₂ was confirmed in PAA-TiO₂/H₂O₂ NPs, because spontaneous hROS production was observed w/o X-ray irradiation. In addition, PAA-TiO₂/H₂O₂ NPs had a curious characteristic whereby they absorbed H₂O₂ molecules and released them gradually into a liquid phase. Based on these results, the H₂O₂ was continuously released from PAA-TiO₂/H₂O₂ NPs, and then released H₂O₂ assumed to be functioned indirectly as a radiosensitizing factor.

In-Situ-Reduced Synthesis of Ti³⁺ Self-Doped TiO₂/g-C₃N₄ Heterojunctions with High Photocatalytic Performance under LED Light Irradiation

A simple one-step calcination route was used to prepare Ti(3+) self-doped TiO2/g-C3N4 heterojunctions by mixture of H2Ti3O7 and melamine. X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), electron spin resonance (ESR) spectroscopy, and UV-Vis diffuse reflectance spectroscopy (UV-vis DRS) technologies were used to characterize the structure, crystallinity, morphology, and chemical state of the as-prepared samples. The absorption of the prepared Ti(3+) self-doped TiO2/g-C3N4 heterojunctions shifted to a longer wavelength region in comparison with pristine TiO2 and g-C3N4. The photocatalytic activities of the heterojunctions were studied by degrading methylene blue under a 30 W visible-light-emitting diode irradiation source. The visible-light photocatalytic activities enhanced by the prepared Ti(3+) self-doped TiO2/g-C3N4 heterojunctions were observed and proved to be better than that of pure TiO2 and g-C3N4. The photocatalysis mechanism was investigated and discussed. The intensive separation efficiency of photogenerated electron-hole in the prepared heterojunction was confirmed by photoluminescence (PL) spectra. The removal rate constant reached 0.038 min(-1) for the 22.3 wt % Ti(3+) self-doped TiO2/g-C3N4 heterojunction, which was 26.76 and 7.6 times higher than that of pure TiO2 and g-C3N4, respectively. The established heterojunction between the interfaces of TiO2 nanoparticles and g-C3N4 nanosheets as well as introduced Ti(3+) led to the rapid electron transfer rate and improved photoinduced electron-hole pair's separation efficiency, resulting in the improved photocatalytic performance of the Ti(3+) self-doped TiO2/g-C3N4 heterojunctions.

Effect of the duration of UV irradiation on the anticoagulant properties of titanium dioxide films

Recently, UV irradiation has been reported as a new approach to significantly improve the anticoagulant properties of titanium dioxide (TiO2) films by suppressing fibrinogen adsorption and platelet adhesion. This study focuses on how fibrinogen adsorption of and platelet adhesion to TiO2 films is affected by the duration of UV irradiation. Furthermore, this study intends to describe the link between the suppression effect and the changes in the TiO2 films nature caused by photogenerated reactive oxygen species (ROS). First, we performed UV irradiation in different atmospheres as model 1 to determine the effect of oxygen gas on the anticoagulant properties of TiO2 films. The results showed that the suppression of platelet adhesion induced by UV irradiation depended on the presence of oxygen gas, indicating that ROS were photogenerated, and the ROS-induced surface change was related to the improvement in the anticoagulant ability. Then, we fabricated three other types of TiO2 samples in air by varying the UV irradiation time: (1) model 2, comprising fully UV-irradiated TiO2 films, (2) model 3, comprising partially UV-irradiated TiO2 films, and (3) model 4, comprising fully UV-irradiated TiO2-Si micropatterns. The results indicated that UV irradiation affected the anticoagulant properties of TiO2 films in a time-dependent manner. UV irradiation on TiO2 films for short duration (e.g., 1 min) evidenced a suppression effect on fibrinogen adsorption and platelet adhesion, an effect that could not be the result of photoinduced superhydrophilicity, increased hydroxyl groups (-OH) number, or decomposition of the adsorbed hydrocarbon. When the UV irradiation time was longer, this suppression effect extended from the surface of the UV-irradiated TiO2 films to the surface of the adjacent masked TiO2 films and the nearby Si surface. This result supported that the suppression effect could be related to the changes in the nature of the TiO2 films that were caused by the photogenerated and diffused ROS. Further, this extension of the suppression effect to the Si surface indicated that the photogenerated ROS could be used to improve the anticoagulant properties of other materials. A prolonged UV irradiation time (e.g., 240 min) may enhance the fibrinogen adsorption of and platelet adhesion to TiO2 films, which could be related to the decomposition of the adsorbed hydrocarbon and the increase in the positive charge. However, when comparing the enhancement effect and the suppression effect, the results showed that the latter was the main one to influence fibrinogen adsorption of and platelet adhesion to TiO2 films. This study provides an important basis for understanding the behavior of UV-irradiated TiO2 films as anticoagulant materials.

Introduction of peroxo groups into titania: preparation, characterization and properties of the new peroxo-containing phase

A new phase, where peroxo groups are incorporated into titania particles, along with anatase and hydrated η-TiO₂ with peroxo groups on the surface of titania nanoparticles were prepared.

Fabrication of Ti3+ self-doped TiO2(A) nanoparticle/TiO2(R) nanorod heterojunctions with enhanced visible-light-driven photocatalytic properties

Ti³⁺ self-doped TiO₂(A)/TiO₂(R) heterojunctions were synthesized and the samples exhibit high visible light photocatalytic activity.

Synthesis of peroxo-titanium decorated H-titanate-nanotube-based hierarchical microspheres with enhanced visible-light photocatalytic activity in degradation of Rhodamine B

Peroxo-titanium decorated H-titanate-nanotube-based hierarchical microspheres were prepared by a hydrothermal method, and they exhibited enhanced visible-light activity.

H(2)O(2)-sensitized TiO(2)/SiO(2) composites with high photocatalytic activity under visible irradiation

TiO(2)/SiO(2) composite photocatalysts were prepared by depositing of TiO(2) onto nano-SiO(2) particles. X-ray diffraction (XRD), transmission electron micrograph (TEM), Raman spectrometer, UV-Vis diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy (FT-IR) were employed to characterize the properties of the synthesized TiO(2)/SiO(2) composites. These results indicated that the products without calcination were amorphous, and calcination could enhance the crystallinity of TiO(2). Increases in the amount of TiO(2) would decrease the dispersion in the composites. H(2)O(2)-sensitized TiO(2)/SiO(2) composite photocatalysts could absorb visible light at wavelength below 550 nm. The photocatalytic activity of as-prepared catalysts was characterized by methyl-orange degradation. The results showed the uncalcined composite photocatalysts with amorphous TiO(2) exhibited higher photocatalytic activity under visible light, and the activity of catalysts with TiO(2) content over 30% decreased with increasing of TiO(2) content. Increases in the calcination temperature and TiO(2) content promote the formation of bulk TiO(2) and result in a decrease in activity.