Photocatalytic degradation of the herbicide terbuthylazine: Preparation, characterization and photoactivity of the immobilized thin layer of TiO2/chitosan

Investigation of the Persistence, Toxicological Effects, and Ecological Issues of S-Triazine Herbicides and Their Biodegradation Using Emerging Technologies: A Review

S-triazines are a group of herbicides that are extensively applied to control broadleaf weeds and grasses in agricultural production. They are mainly taken up through plant roots and are transformed by xylem tissues throughout the plant system. They are highly persistent and have a long half-life in the environment. Due to imprudent use, their toxic residues have enormously increased in the last few years and are frequently detected in food commodities, which causes chronic diseases in humans and mammals. However, for the safety of the environment and the diversity of living organisms, the removal of s-triazine herbicides has received widespread attention. In this review, the degradation of s-triazine herbicides and their intermediates by indigenous microbial species, genes, enzymes, plants, and nanoparticles are systematically investigated. The hydrolytic degradation of substituents on the s-triazine ring is catalyzed by enzymes from the amidohydrolase superfamily and yields cyanuric acid as an intermediate. Cyanuric acid is further metabolized into ammonia and carbon dioxide. Microbial-free cells efficiently degrade s-triazine herbicides in laboratory as well as field trials. Additionally, the combinatorial approach of nanomaterials with indigenous microbes has vast potential and considered sustainable for removing toxic residues in the agroecosystem. Due to their smaller size and unique properties, they are equally distributed in sediments, soil, water bodies, and even small crevices. Finally, this paper highlights the implementation of bioinformatics and molecular tools, which provide a myriad of new methods to monitor the biodegradation of s-triazine herbicides and help to identify the diverse number of microbial communities that actively participate in the biodegradation process.

The use of chitosan-based composites for environmental remediation: A review

The presence of hazardous pollutants in water sources as a result of industrial activities is a major environmental challenge that impedes the availability of safe drinking water. Adsorptive and photocatalytic degradative removal of various pollutants in wastewater have been recognized as cost-effective and energy-efficient strategies. In addition to its biological activity, chitosan and its derivatives are considered as promising materials for the removal of various pollutants. The abundance of hydroxyl and amino groups in the chitosan macromolecular structure results in a variety of concurrent pollutant's adsorption mechanisms. Furthermore, adding chitosan to photocatalysts increases the mass transfer while decreasing both the band gap energy and the amount of intermediates produced during photocatalytic processes, improving the overall photocatalytic efficiency. Herein, we have reviewed the current design and preparation of chitosan and its composites, as well as their applications for the removal of various pollutants by adsorption and photocatalysis processes. Effects of operating variables such as the pH, catalyst mass, contact time, light wavelength, initial pollutant's concentration, and catalyst recyclability, are discussed. Various kinetic and isotherm models are presented to elucidate the rates, and mechanisms of pollutant's removal, onto chitosan-based composites, and several case studies are presented. Additionally, the antibacterial activity of chitosan-based composites has been discussed. This review aims to provide a comprehensive and up-to-date overview of the applications of chitosan-based composites in wastewater treatment and put forward new insights for the development of highly effective chitosan-based adsorbents and photocatalysts. Finally, the main challenges and future directions in the field are discussed.

Removal of Chloroacetanilide Herbicides from Water Using Heterogeneous Photocatalysis with TiO2/UV-A

Chloroacetanilide herbicides are widely used in the agricultural sector throughout the world. Because of their poor biodegradability, high water solubility, and long persistence, chloroacetanilide herbicides have a high potential to contaminate water, and conventional water treatment processes do not ensure sufficient removal. Therefore, heterogeneous photocatalysis using TiO2/UV-A was investigated for the degradation of alachlor, acetochlor, and metolachlor from water. Two commercially available TiO2 (P25 and AV-01) were used as photocatalysts. Different experimental setups were also tested. In addition, the toxicity of single herbicides and mixtures of their photocatalytic degradation products to the freshwater alga Chlorella kessleri was investigated via a growth inhibition test. The maximum removal efficiency for alachlor, acetochlor, and metolachlor was 97.5%, 93.1%, and 98.2%, respectively. No significant differences in the removal efficiency of chloroacetanilide herbicides were observed for the photocatalysts used. Although the concentrations of all herbicides during photocatalysis decreased, the toxicity of the resulting mixtures of degradation products increased or remained the same, indicating the formation of toxic degradation products.

Photolytic Controlled Release Formulation of Methotrexate Loaded in Chitosan/TiO2 Nanoparticles for Breast Cancer

A new system composed of chitosan nanoparticles loaded with methotrexate (MTX-CS-NPs) and functionalized with photocatalytic TiO₂ nanoparticles (TiO₂-NPs) was prepared. This system is expected to initiate polymeric rupture of MTX-CS-NPs and subsequently release MTX, upon illumination with UV light. MTX-CS-NPs were prepared and characterized in terms of particle size, charge, polydispersity and drug release before and after coating with TiO₂-NPs. The release of MTX in vitro was studied in dark, light and UV light. Finally, coated and uncoated MTX-CS-NPs were studied in vitro using MCF-7 cell line. The functionalized NPs were larger in size, more polydisperse and carried higher positive charges compared to the unfunctionalized NPs. The entrapment efficacy was high reaching 75% and was not affected by coating with MTX-CS-NPs. Further, less than 5% of methotrexate was released after 80 h from uncoated NPs and the release was not enhanced by UV illumination of the particles. In contrast, the release from functionalized NPs was enhanced, reaching 40% after 80 h, as the particles were stroked with UV light and as the amount of TiO₂-NPs used in coating increased. Finally, coating the MTX-CS-NPs with TiO₂-NPs significantly enhanced their cytotoxicity on MCF-7 cells. The coated MTX-CS-NPs recorded low cell viabilities compared to the other formulations. In conclusion, the drug release of MTX-CS-NPs could be triggered and controlled remotely by coating with TiO₂-NPs, which maybe more effective in cancer treatment.

Nanometer Titanium Dioxide Mediated High Efficiency Photodegradation of Fluazifop-p-Butyl

The widespread use of fluazifop-p-butyl (FPB) contributes to its presence in the environment. Considering the ecological risks of FPB residues in the environment, the anatase nanometer titanium dioxide (nano-TiO₂) mediated photocatalytic degradation of FPB was studied by smearing FPB and nano-TiO₂ together on a glass plane; illumination, trimethylsilane derivatization of photolysis products, high performance liquid chromatography (HPLC) quantitative analysis and gas chromatograph-mass spectrometer (GC-MS) identification were used. Results showed that the first order dynamic model could describe the photodegradation of FPB by nano-TiO₂ mediated, and the photodegradation and photosensitization rates were found to be positively correlated with the dose of nano-TiO₂ at lower dose ranges. It is noticeable that a strong photosensitization effect was exhibited on degradation of FPB, not only under high-pressure mercury lamps, but also simulated sunlight (xenon lamp light). Ultimately, twelve main photolytic products were reasonably speculated, whilst five photolysis pathways were proposed. These results together suggest that nano-TiO₂ can be used as an effective photosensitizer to accelerate FPB photolysis.

Terbuthylazine and desethylterbuthylazine: Recent occurrence, mobility and removal techniques

The herbicide terbuthylazine (TBA) has displaced atrazine in most of EU countries, becoming one of the most regularly used pesticides and, therefore, frequently detected in natural waters. The affinity of TBA for soil organic matter suggests prolonged contamination; degradation leads to the release of the metabolite desethylterbuthylazine (DET), which has higher water solubility and binds more weakly to organic matter compared to the parent compound, resulting in higher associated risk for contamination of groundwater resources. Additionally, TBA and DET are chemicals of emerging concern because of their persistence and toxicity towards aquatic organisms; moreover, they are known to have significant endocrine disruption capacity to wildlife and humans. Conventional treatments applied during drinking water production do not lead to the complete removal of these chemicals; activated carbon provides the greatest efficiency, whereas ozonation can generate by-products with comparable oestrogenic activity to atrazine. Hydrogen peroxide alone is ineffective to degrade TBA, while UV/H₂O₂ advanced oxidation and photocatalysis are the most effective processes for oxidation of TBA. It has been determined that direct photolysis gives the highest degradation efficiency of all UV/H₂O₂ treatments, while most of the photocatalytic degradation is attributed to OH radicals, and TiO₂ solar-photocatalytic ozonation can lead to almost complete TBA removal in ∼30 min. Constructed wetlands provide a valuable buffer capacity, protecting downstream surface waters from contaminated runoff. TBA and DET occurrence are summarized and removal techniques are critically evaluated and compared, to provide the reader with a comprehensive guide to state-of-the-art TBA removal and potential future treatments.

Preparation of (5.0%)Er3+:Y3Al5O12/Pt-(TiO2-Ta2O5) nanocatalysts and application in sonocatalytic decomposition of ametryn in aqueous solution

(5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder, as a high effective sonocatalyst, was prepared using sol-gel and calcination method. Then it was characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). In order to evaluate the sonocatalytic activity of the prepared (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder, the sonocatalytic decomposition of ametryn was studied. In addition, some influencing factors such as different Ti/Ta molar ratios on the sonocatalytic activity of the prepared (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder, catalyst added amount with ultrasonic irradiation time and used times on the sonocatalytic decomposition efficiency were examined by using ion chromatogram determination. The experimental results showed that the best sonocatalytic decomposition ratio of ametryn were 77.50% based on the N atom calculation and 95.00% based on the S atom calculation, respectively, when the conditions of 10.00mg/L initial concentration, 1.00g/L prepared (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder (Ti/Ta=1.00:0.25 heat-treated at 550°C for 3.0h) added amount, 150min ultrasonic irradiation (40kHz frequency and 300W output power), 100mL total volume and 25-28°C temperature were adopted. Therefore, the (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) composite nanoparticles could be considered as an effective sonocatalyst for decomposition of ametryn in aqueous solution.

Tetrabromobisphenol A photoelectrocatalytic degradation using reduced graphene oxide and cerium dioxide comodified TiO2 nanotube arrays as electrode under visible light

Tetrabromobisphenol A, one of the most important brominated retardants, is an typical persistent organic pollutant and it is of great value to develop rapid and effective degradation method. Present study established a photoelectrodegradation method with CeO₂ and reduced graphene oxide co-modified TiO₂ nanotube arrays (RGO-CeO₂-TiO₂ NAs), which were successfully synthesized and characterized with scanning electron microscopy (SEM) and Energy Dispersive X Ray Spectrometry (EDX). The SEM Images revealed that the nanotubes had a diameter of about 100 nm and an obvious layer of CeO₂ and RGO on the surface of TiO₂ nanotube arrays. The EDX data exhibited the presence of Ce element. The results demonstrated that TBBPA was degraded at a high degradation rate constant of 0.0191 min^-1, and photogenerated holes played a major role in the degradation reaction. Significant decrease of degradation efficiency was achieved with the presence of EDTA-2Na(hole scavenger), yet while the existence of t-BuOH(OH scavenger) resulted in less inhibition on the degradation. Besides, RGO-CeO₂-TiO₂ NAs exhibited good stability with rarely decline of degradation efficiency for ten reused runs. All these indicated that RGO-CeO₂-TiO₂ NAs were a good catalyst with extraordinary catalytic activity and stability for PEC degradation, and would have great potential in the control and removal of pollutants.

Effects of terbuthylazine-desethyl, a terbuthylazine degradation product, on red swamp crayfish (Procambarus clarkii)

Terbuthylazine is a widely used triazine pesticide. This, together with one of its degradation products, terbuthylazine-desethyl (TD), are frequently found in quantities exceeding the EU limit of 0.1μg/L in aquatic ecosystems where they might constitute a serious risk to non-target organisms. The sub-chronic effects of TD at 2.9μg/L (real environmental concentration) and at 580μg/L were investigated in a non-target aquatic species, the red swamp crayfish (Procambarus clarkii). Gill and hepatopancreas histopathology, alterations in biochemical parameters of haemolymph, oxidative damage to hepatopancreas, and changes in antioxidant biomarkers in muscle and hepatopancreas were recorded at both tested concentrations after 14days exposure. A 14day recovery period in TD-free water was not sufficient for restoration of normal parameters. Chronic terbuthylazine-desethyl exposure affected biochemical profile, and the antioxidant system, caused oxidative stress and histopathological changes in hepatopancreas of red swamp crayfish.