Water splitting based on homogeneous copper molecular catalysts

Impact of the hybridization form of the coordinated nitrogen atom on the electrocatalytic water oxidation performance of copper complexes with pentadentate amine-pyridine ligands

The field of molecular catalysts places a strong emphasis on the connection between the ligand structure and its catalytic performance. Herein, we changed the type of coordinated nitrogen atom in pentadentate amine-pyridine ligands to explore the impact of its hybridization form on the water oxidation performance of copper complexes. In the electrochemical tests, the copper complex bearing dipyridine-triamine displayed an apparently higher rate constant of 4.97 s-1, while the copper complex with tripyridine-diamine demonstrated overpotential reduction by 56 mV and better long-term electrolytic stability.

Electron transfer catalysis mediated by 3d complexes of redox non-innocent ligands possessing an azo function: a perspective

It was first reported almost two decades ago that ligands with azo functions are capable of accepting electron(s) upon coordination to produce azo-anion radical complexes, thereby exhibiting redox non-innocence. Over the past two decades, there have been numerous reports of such complexes along with their structures and diverse characteristics. The ability of a coordinated azo function to accept one or more electron(s), thereby acting as an electron reservoir, is currently employed to carry out electron transfer catalysis since they can undergo redox transformation at mild potentials due to the presence of energetically accessible energy levels. The cooperative involvement of redox non-innocent ligand(s) containing an azo group and the coordinated metal centre can adjust and modulate the Lewis acidity of the latter through selective ligand-centred redox events, thereby manipulating the capacity of the metal centre to bind to the substrate. We have summarized the list of first row transition metal complexes of iron, cobalt, nickel, copper and zinc with redox non-innocent ligands incorporating an azo function that have been exploited as electron transfer catalysts to effectuate sustainable synthesis of a wide variety of useful chemicals. These include ketazines, pyrimidines, benzothiazole, benzoxazoles, N-acyl hydrazones, quinazoline-4(3)H-ones, C-3 alkylated indoles, N-alkylated anilines and N-alkylated heteroamines. The reaction pathways, as demonstrated by catalytic loops, reveal that the azo function of a coordinated ligand can act as an electron sink in the initial steps to bring about alcohol oxidation and thereafter, they serve as an electron pool to produce the final products either via HAT or PCET processes.

An inclusive review and perspective on Cu-based materials for electrochemical water splitting

In recent years, there has been a resurgence of interest in developing green and renewable alternate energy sources as a solution to the energy and environmental problems produced by conventional fossil fuel use. As a very effective energy transporter, hydrogen (H₂) is a possible candidate for the future energy supply. Hydrogen production by water splitting is a promising new energy option. Strong, efficient, and abundant catalysts are required for increasing the efficiency of the water splitting process. Cu-based materials as an electrocatalyst have shown promising results for application in the Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) in water splitting. In this review, our aim is to cover the latest developments in the synthesis, characterisation, and electrochemical behaviour of Cu-based materials as a HER, and OER electrocatalyst, highlighting the impact that these advances have had on the field. It is intended that this review article will serve as a roadmap for developing novel, cost-effective electrocatalysts for electrochemical water splitting based on nanostructured materials with particular emphasis on Cu-based materials for electrocatalytic water splitting.

Modulating the electrocatalytic activity of mononuclear nickel complexes toward water oxidation by tertiary amine group

Water oxidation is the bottleneck of water splitting, which is a promising strategy for hydrogen production. Therefore, it is significant to develop efficient water oxidation catalysts. Herein, electrochemical water oxidation catalyzed by three nickel complexes, namely [Ni(bptn)(H₂O)](ClO₄)₂ (1), [Ni(mbptn)(CH₃CN)](ClO₄)₂ (2), and [Ni(tmbptn)(H₂O)](ClO₄)₂ (3) (bptn = 1,9-bis(2-pyridyl)-2,5,8-triazanonane, mbptn = 5-methyl-1,9-bis(2-pyridyl)-2,5,8-triazanonane, and tmbptn = 1,9-bis(2-pyridyl)-2,5,8-triazanonane), is studied under near-neutral condition (pH 9.0). Meanwhile, the homogeneous catalytic behaviors of the three mononuclear nickel complexes were investigated and confirmed by scanning electron microscopy, energy dispersive spectrometry, X-ray photoelectron spectroscopy and electrochemical method. Complex 1 stabilized by a pentadentate ligand with three N-H fragments homogeneously catalyzes water oxidation to oxygen with the lowest onset overpotential. Complex 2 stabilized by a similar ligand with two N-H groups and one N-CH₃ group exhibits relatively higher onset overpotential but higher catalytic current and turnover frequency. However, complex 3 with three N-CH₃ coordination environment shows the highest onset overpotential and the highest catalytic current at higher potential. Comparison of catalytic behaviors and ligand structure of the three complexes reveals that the methyl group on the polypyridine amine ligand affects the water oxidation activity of the complexes obviously. The electronic effect of N-CH₃ coordination environment leads to higher redox potential of the metal center and potential demand for water oxidation, while it leads to higher reaction activity of high-valent intermediates, which account for higher catalytic current and efficiency of water oxidation. This work reveals that electrocatalytic water oxidation performance of nickel complexes can be finely modulated by constructing suitable N-CH₃ coordination.

Ligands modification strategies for mononuclear water splitting catalysts

Artificial photosynthesis (AP) has been proved to be a promising way of alleviating global climate change and energy crisis. Among various materials for AP, molecular complexes play an important role due to their favorable efficiency, stability, and activity. As a result of its importance, the topic has been extensively reviewed, however, most of them paid attention to the designs and preparations of complexes and their water splitting mechanisms. In fact, ligands design and preparation also play an important role in metal complexes’ properties and catalysis performance. In this review, we focus on the ligands that are suitable for designing mononuclear catalysts for water splitting, providing a coherent discussion at the strategic level because of the availability of various activity studies for the selected complexes. Two main designing strategies for ligands in molecular catalysts, substituents modification and backbone construction, are discussed in detail in terms of their potentials for water splitting catalysts.

Voltammetric Detection of Glucose-The Electrochemical Behavior of the Copper Oxide Materials with Well-Defined Facets

Cu₂O nanomaterials with well-defined facets and uniform size were synthesized by a wet-chemical method. Regardless of the additive composition, powders crystallize mostly in cuprite form. To compare their electrochemical behavior, the obtained materials were deposited on carbon glassy electrodes. The response to glucose from the materials with different exposed facets was recorded with a delay at the anodic curve. The chronoamperometric analyses (AMP) exhibited a lower signal in contrast to the cyclic voltammetry data (CV), indicating that the number of active sites involved in glucose oxidation processes resulting from the structure of the material is insufficient. For samples with dominant (100) or (111) planes, a typical characteristic was observed, however, with an additional peak at the anodic curve. The location of the peaks is approximately the same and no significant differences from the AMP and CV analysis were observed. The sample enclosed by the (111) facets exhibited higher activity; however, as a result of the redox reaction with glucose molecules, the surface state is changing. Cu₂O materials enclosed by (100) planes exhibited optimal sensitivity as well as a large detective range. Samples with differential facet exposition present various current-potential profiles, as the effect of binder-particle interaction with Nafion.

Exploring the Potential of Water-Soluble Cu(II) Complexes with MPA–CdTe Quantum Dots for Photoinduced Electron Transfer

Three water-soluble copper complexes based on the amine/pyridine functionalities were investigated, along with quantum dots, as a catalyst–photosensitizer assembly, respectively, for fundamental understanding of photoinduced electron transfer. Luminescence quenching and lifetime measurements were performed to try and establish the actual process that leads to the quenching, such as electron transfer, energy transfer, or complex formation (static quenching). Cyclic voltammetry and dynamic light scattering experiments were also performed. Irrespective of the similar reduction potentials of the three complexes, very different photoluminescence properties were observed.

Structural Elucidation, Aggregation, and Dynamic Behaviour of N,N,N,N ‐Copper(I) Schiff Base Complexes in Solid and in Solution: A Combined NMR, X‐ray Spectroscopic and Crystallographic Investigation

A series of Cu(I) complexes of bidentate or tetradentate Schiff base ligands bearing either 1‐H‐imidazole or pyridine moieties were synthesized. The complexes were studied by a combination of NMR and X‐ray spectroscopic techniques. The differences between the imidazole‐ and pyridine‐based ligands were examined by ¹H, ¹³C and ¹⁵N NMR spectroscopy. The magnitude of the ¹⁵N_imine coordination shifts was found to be strongly affected by the nature of the heterocycle in the complexes. These trends showed good correlation with the obtained Cu−N_imine bond lengths from single‐crystal X‐ray diffraction measurements. Variable‐temperature NMR experiments, in combination with diffusion ordered spectroscopy (DOSY) revealed that one of the complexes underwent a temperature‐dependent interconversion between a monomer, a dimer and a higher aggregate. The complexes bearing tetradentate imidazole ligands were further studied using Cu K‐edge XAS and VtC XES, where DFT‐assisted assignment of spectral features suggested that these complexes may form polynuclear oligomers in solid state. Additionally, the Cu(II) analogue of one of the complexes was incorporated into a metal‐organic framework (MOF) as a way to obtain discrete, mononuclear complexes in the solid state.

Catkin-derived mesoporous carbon-supported molybdenum disulfide and nickelhydroxyloxide hybrid as a bifunctional electrocatalyst for driving overall water splitting

In this work, a two-dimensional heterostructure of molybdenum disulfide (MoS₂) and nickelhydroxyloxide (NiOOH) nanosheets supported on catkin-derived mesoporous carbon (C-MC) was constructed and exploited as an efficient electrocatalyst for overall water splitting. The C-MC nanostructure was prepared by pyrolyzing biomass material of catkin at 600 °C in N₂ atmosphere. The C-MC network exhibited hollow nanotube structure and had a large specific surface area, comprising trace nitrogen and a large amount of oxygen vacancies. It further served as the support for the growth of NiOOH nanosheets (NiOOH@C-MC), which was combined with MoS₂ nanosheets by in situ growth, yielding a multicomponent electrocatalyst (MoS₂@NiOOH@C-MC). By integrating the superior hydrogen evolution reaction (HER) performance of MoS₂, oxygen evolution reaction (OER) performance of NiOOH, and the fast electron transfer capability of C-MC, the prepared MoS₂@NiOOH@C-MC illustrated a low potential of - 250 mV for HER and 1.51 V for OER at the current density of 10 mV cm^-2. Consequently, when applied as the working electrode for driving overall water splitting in a two-electrode system, the bifunctional MoS₂@NiOOH@C-MC electrocatalyst displayed a low cell voltage of 1.62 V at the current density of 10 mA cm^-2. The present work provides a new strategy that uses biomass material for developing bifunctional electrocatalyst for overall water splitting.

Electrocatalytic water oxidation by a water-soluble copper complex with a pentadentate amine-pyridine ligand

A water-soluble copper complex with a diamine-tripyridine ligand was synthesized successfully and well characterized. It was found to be catalytically active for the water oxidation reaction under basic conditions. Based on the electrochemical test result, this copper complex displayed an apparent rate constant (k_cat) of 0.81 s^-1 for the oxygen evolution reaction in 0.1 M phosphate buffer solution at pH 11.0. More importantly, the copper complex remained stable over 3 h of a bulk electrolysis experiment at 1.60 V with a Faradaic efficiency of 90.7% for O₂ evolution, and the decrement of current density was only 1.9%. These results suggest that the pentadentate copper complex is an efficient and durable homogeneous Earth-abundant electrocatalyst for water oxidation.

Water Splitting Induced by Visible Light at a Copper-Based Single-Molecule Junction

Water splitting is an essential process for converting light energy into easily storable energy in the form of hydrogen. As environmentally preferable catalysts, Cu-based materials have attracted attention as water-splitting catalysts. To enhance the efficiency of water splitting, a reaction process should be developed. Single-molecule junctions (SMJs) are attractive structures for developing these reactions because the molecule electronic state is significantly modulated, and characteristic electromagnetic effects can be expected. Here, water splitting is induced at Cu-based SMJ and the produced hydrogen is characterized at a single-molecule scale by employing electron transport measurements. After visible light irradiation, the conductance states originate from Cu/hydrogen molecule/Cu junctions, while before irradiation, only Cu/water molecule/Cu junctions were observed. The vibration spectra obtained from inelastic electron tunneling spectroscopy combined with the first-principles calculations reveal that the water molecule trapped between the Cu electrodes is decomposed and that hydrogen is produced. Time-dependent and wavelength-dependent measurements show that localized-surface plasmon decomposes the water molecule in the vicinity of the junction. These findings indicate the potential ability of Cu-based materials for photocatalysis.

Electrodeposition of Fe-Complexes on Oxide Surfaces for Efficient OER Catalysis

Progress in non-covalent/self-assembled immobilization methods on (photo)electrode materials for molecular catalysts could broaden the scope of attainable systems. While covalent linkage (though considered more stable) necessitates functional groups introduced by means of often cumbersome synthetic procedures, non-covalent assemblies require sufficient propensity of the molecular unit for surface adsorption, thus set less rigorous pre-requisites. Herein, we report efficient electrodeposition (ED) of two Fe(III) complexes prepared with closely related NN’N pincer ligands yielding stable and active ad-layers for the electrocatalysis of the oxygen-evolving reaction (OER). The ED method is based on the utilization of a chloride precursor complex [FeIIICl2(NN’N)], which is dissolved in an organic electrolyte undergoes chloride/aqua ligand exchange upon addition of water. ED provides patchy distribution of a chloride-depleted catalyst layer on indium tin oxide (ITO) and fluorine-doped tin oxide (FTO) surfaces, which can be applied for long periods as OER electrocatalysts. Compared to drop-casting or layering of [FeIIICl2(NN’N)] with Nafion (a commonly used support for molecular electrocatalysts), the surface modification by ED is a material saving and efficient method to immobilize catalysts.

Na3[Ru2(µ-CO3)4] as a Homogeneous Catalyst for Water Oxidation; HCO3− as a Co-Catalyst

In neutral medium (pH 7.0) [RuIIIRuII(µ-CO3)4(OH)]4− undergoes one electron oxidation to form [RuIIIRuIII(µ-CO3)4(OH)2]4− at an E1/2 of 0.85 V vs. NHE followed by electro-catalytic water oxidation at a potential ≥1.5 V. When the same electrochemical measurements are performed in bicarbonate medium (pH 8.3), the complex first undergoes one electron oxidation at an Epa of 0.86 V to form [RuIIIRuIII(µ-CO3)4(OH)2]4−. This complex further undergoes two step one electron oxidations to form RuIVRuIII and RuIVRuIV species at potentials (Epa) 1.18 and 1.35 V, respectively. The RuIVRuIII and RuIVRuIV species in bicarbonate solutions are [RuIVRuIII(µ-CO3)4(OH)(CO3)]4− and [RuIVRuIV(µ-CO3)4(O)(CO3)]4− based on density functional theory (DFT) calculations. The formation of HCO4− in the course of the oxidation has been demonstrated by DFT. The catalyst acts as homogeneous water oxidation catalyst, and after long term chronoamperometry, the absorption spectra does not change significantly. Each step has been found to follow a proton coupled electron transfer process (PCET) as obtained from the pH dependent studies. The catalytic current is found to follow linear relation with the concentration of the catalyst and bicarbonate. Thus, bicarbonate is involved in the catalytic process that is also evident from the generation of higher oxidation peaks in cyclic voltammetry. The detailed mechanism has been derived by DFT. A catalyst with no organic ligands has the advantage of long-time stability.

Redox-inactive metal single-site molecular complexes: a new generation of electrocatalysts for oxygen evolution?

Bypassing the metal-based oxidation in a Cu-containing water oxidation catalytic system.

Reactivity and Mechanism of Photo- and Electrocatalytic Hydrogen Evolution by a Diimine Copper(I) Complex

The tetrahedral copper(I) diimine complex [Cu(pq)2]BF4 displays high photocatalytic activity for the H2 evolution reaction with a turnover number of 3564, thus representing the first type of a Cu(I) quinoxaline complex capable of catalyzing proton reduction. Electrochemical experiments indicate that molecular mechanisms prevail and DFT calculations provide in-depth insight into the catalytic pathway, suggesting that the coordinating nitrogens play crucial roles in proton exchange and hydrogen formation.

Water Oxidation at Neutral pH using a Highly Active Copper-Based Electrocatalyst

The sluggish kinetics of the oxygen evolution reaction (OER) at the anode severely limit hydrogen production at the cathode in water splitting systems. Although electrocatalytic systems based on cheap and earth-abundant copper catalysts have shown promise for water oxidation under basic conditions, only very few examples with high overpotential can be operated under acidic or neutral conditions, even though hydrogen evolution in the latter case is much easier. This work presents an efficient and robust Cu-based molecular catalyst, which self-assembles as a periodic film from its precursors under aqueous conditions on the surface of a glassy carbon electrode. This film catalyzes the OER under neutral conditions with impressively low overpotential. In controlled potential electrolysis, a stable catalytic current of 1.0 mA cm^-2 can be achieved at only 2.0 V (vs. RHE) and no significant decrease in the catalytic current is observed even after prolonged bulk electrolysis. The catalyst displays first-order kinetics and a single site mechanism for water oxidation with a TOF (k_cat ) of 0.6 s^-1 . DFT calculations on of the periodic Cu(TCA)₂ (HTCA=1-mesityl-1H-1,2,3-triazole-4-carboxylic acid) film reveal that TCA defects within the film create Cu^I active sites that provide a low overpotential route for OER, which involves Cu^I , Cu^II -OH, Cu^III =O and Cu^II -OOH intermediates and is enabled at a potential of 1.54 V (vs. RHE), requiring an overpotential of 0.31 V. This corresponds well with an overpotential of approximately 0.29 V obtained experimentally for the grown catalytic film after 100 CV cycles at pH 6. However, to reach a higher current density of 1 mA cm^-2 , an overpotential of 0.72 V is required.

An organic polymer CuPPc-derived copper oxide as a highly efficient electrocatalyst for water oxidation

Herein, we report a novel CuPPc (copper polymeric phthalocyanine)/CF (copper foam) nanoflake material, as precatalyst for the generation of an excellent water oxidation catalyst (WOC). Under optimized conditions, the CuPPc-derived Cu oxide affords a current density of 10 mA cm^-2 under an overpotential (η) of 287 mV and sustains for at least 50 h in 1.0 M KOH. The strategy presented here is favorable to develop the electrocatalysts for water splitting.

Copper-based homogeneous and heterogeneous catalysts for electrochemical water oxidation

Water oxidation is currently believed to be the bottleneck in the field of electrochemical water splitting and artificial photosynthesis. Enormous efforts have been devoted toward the exploration of water oxidation catalysts (WOCs), including homogeneous and heterogeneous catalysts. Recently, Cu-based WOCs have been widely developed because of their high abundance, low cost, and biological relevance. However, to the best of our knowledge, no review has been made so far on such types of catalysts. Thus, we have summarized the recent progress made in the development of homogeneous and heterogeneous Cu-based WOCs for electrochemical catalysis. Furthermore, the evaluations of catalytic activity, stability, and mechanism of these catalysts are carefully concluded and highlighted. We believe that this review can summarize the current progress in the field of Cu-based electrochemical WOCs and help in the design of more efficient and stable WOCs.

Enhanced Photoelectrochemical Water Splitting with Er- and W-Codoped Bismuth Vanadate with WO3 Heterojunction-Based Two-Dimensional Photoelectrode

A novel two-dimensional (2D) heterojunction photoelectrode composed of WO₃ and (Er,W):BiVO₄ is proposed for water oxidation with efficient photoinduced charge carrier separation and transfer. Er stoichiometric along with W nonstoichiometric codoping was introduced to simultaneously manage vacancy creation during substitutional doping, enhance light absorption, and reduce overall impedance. It was found that Er³⁺ is substituted at the Bi³⁺ sites in the BiVO₄ lattice to provide expanded light absorption from 400 to 680 nm. The fabricated WO₃/(Er,W):BiVO₄ electrode shows photocurrent densities of 4.1 and 7.2 mA cm^-2 at 1.23 and 2.3 V (vs reversible hydrogen electrode, RHE), respectively, under a 1 sun illumination in K₂HPO₄ electrolyte. This electrode has shown remarkably high charge separation efficiency of 93% at 1.23 V (vs RHE). With the addition of a standard surface catalyst (i.e., Co-Pi), the WO₃/(Er,W):BiVO₄/Co-Pi electrode exhibits the highest photocurrent of 5.6 ± 0.3 mA cm^-2 at 1.23 V (vs RHE), nearing the theoretical limit (i.e., 7.5 mA cm^-2) while retaining 98% of the photoelectrochemical cell performance after 3 h. By concomitantly doping the Bi³⁺ and V⁵⁺ sites to enhance absorption, this study demonstrates for the first time a planar WO₃/BiVO₄ heterojunction that reaches 88% of the record-high performance of its nanostructured counterpart. Through a detailed characterization of the electrodes, it is concluded that the stoichiometric Er and nonstoichiometric W codoping extend light absorption region and improve charge separation efficiency by reducing bulk resistance. The photoactive materials with 2D morphology were synthesized using a facile ultrasonic spray-coating technique without any complex process steps and thus it can be scaled for commercial development.

Copper Containing Molecular Systems in Electrocatalytic Water Oxidation—Trends and Perspectives

Molecular design represents an exciting platform to refine mechanistic details of electrocatalytic water oxidation and explore new perspectives. In the growing number of publications some general trends seem to be outlined concerning the operation mechanisms, with the help of experimental and theoretical approaches that have been broadly applied in the case of bioinorganic systems. In this review we focus on bio-inspired Cu-containing complexes that are classified according to the proposed mechanistic pathways and the related experimental evidence, strongly linked to the applied ligand architecture. In addition, we devote special attention to features of molecular compounds, which have been exploited in the efficient fabrication of catalytically active thin films.

Electrocatalytic reduction of protons to hydrogen by a copper complex of the pentadentate ligand Dmphen-DPA in a nonaqueous electrolyte

An aminopyridine-based copper complex was synthesized and investigated for its electrocatalytic proton reduction activity and the plausible mechanism.