CeO2/TiO2 nanostructures enhance adsorption and photocatalytic degradation of organic compounds in aqueous suspension

Facile aqueous synthesis and comparative evaluation of TiO2-semiconductor and TiO2-metal nanohybrid photocatalysts in antibiotics degradation under visible light

Advanced oxidation processes using TiO2-based nanomaterials are sustainable technologies that hold great promise for the degradation of many types of pollutants including pharmaceutical residues. A wide variety of heterostructures coupling TiO2 with visible-light active nanomaterials have been explored to shift its photocatalytic properties to harness sun irradiation but a systematic comparison between them is lacking in the current literature. Furthermore, the high number of proposed nanostructures with different size, morphology, and surface area, and the often complex synthesis processes hamper the transition of these materials into commercial and effective solutions for environmental remediation. Herein, we have designed a facile and cost-effective method to synthesize two heterostructured photocatalysts representative of two main families of novel structures proposed, hybrids of TiO2 with metal (Au) and semiconductor (CeO2) nanomaterials. The photocatalysts have been extensively characterized to ensure a good comparability in terms of co-catalyst doping characteristics, morphology and surface area. The photocatalytic degradation of ciprofloxacin and sulfamethoxazole as target pollutants, two antibiotics of high concern polluting water sources, has been evaluated and CeO2/TiO2 exhibited the highest activity, achieving complete antibiotic degradation at very low photocatalyst concentrations. Our study provides new insights into the development of inexpensive heterostructured photocatalysts and suggests that the non-stoichiometry and characteristic d and f electronic orbital configuration of CeO2 have a significantly improved role in the enhancement of the photocatalytic reaction.

Upcycling of waste EPS beads to immobilized codoped TiO2 photocatalysts for ciprofloxacin degradation and E. coli disinfection under sunlight

The emerging global problem of antimicrobial resistance needs immediate attention. In this regard, this work demonstrates the use of expanded polystyrene waste in the synthesis of immobilized photocatalytic films for the treatment of antibiotics as well as for bacterial disinfection. A boron-cerium codoped TiO2 catalyst (of specific composition: B0.8Ce0.2TiO2) was immobilized in an expanded polystyrene (EPS) film prepared from waste EPS beads. These films were studied for the degradation of ciprofloxacin (CIP) and disinfection of E. coli under sunlight. The film with a catalyst loading of 20 wt% showed a maximum degradation of 89% in 240 min with a corresponding TOC reduction of 84%. A 7.4 and 6.3 log reduction from the bacterial inactivation studies in the presence and absence of antibiotics, respectively, was obtained. The EPS film was stable after five times of reuse, and no significant chemical changes in the used film were observed from FTIR analysis. The average thickness of the prepared film was found from FESEM analysis to be 1.09 mm. These EPS films were also tested for degradation of other antibiotics, such as norfloxacin, levofloxacin and moxifloxacin. The EPS films were tested in two different reactor volumes at optimum conditions. Also, the effectiveness of B0.8Ce0.2TiO2/EPS film in real water samples indicates its potential in large-scale and real-world applications. Thus, these B0.8Ce0.2TiO2/EPS films can be effectively employed for both degradation of ciprofloxacin and the disinfection of E. coli under solar light to solve the increasing problem of antimicrobial resistance.

Photocatalytic and Antimicrobial Properties of Electrospun TiO2-SiO2-Al2O3-ZrO2-CaO-CeO2 Ceramic Membranes

In this study, TiO₂-based ceramic nanofiber membranes in the system of TiO₂-SiO₂-Al₂O₃-ZrO₂-CaO-CeO₂ were synthesized by combining sol-gel and electrospinning processes. In order to investigate the thermal treatment temperature effect, the obtained nanofiber membranes were calcined at different temperatures ranging from 550 to 850 °C. Different characterization methods such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and high-resolution transmission electron microscopy (HR-TEM) were conducted on the obtained membranes to investigate the structural and morphological properties of the nanofibers. The Brunauer-Emmett-Teller surface area of the nanofiber membranes was very high (46.6-149.2 m²/g) and decreased with increasing calcination temperature as expected. Photocatalytic activity investigations were determined using methylene blue (MB) as a model dye under UV and sunlight irradiation. High degradation performances were achieved with the calcination temperatures of 650 and 750 °C because of the high specific surface area and the anatase structure of the nanofiber membranes. Moreover, the ceramic membranes showed antibacterial activity against Escherichia coli as a Gram-negative bacterium and Staphylococcus aureus as a Gram-positive bacterium. The superior properties of the novel TiO₂-based multi-oxide nanofiber membranes proved as a promising candidate for various industries, especially the removal of textile dyes from wastewater.

Efficient Solar Light Photocatalyst Made of Ag3PO4 Coated TiO2-SiO2 Microspheres

Solar light active photocatalyst was prepared as silver phosphate (Ag₃PO₄) coating on titania-silica (TiO₂-SiO₂) microspheres. Titania-silica microsphere was obtained by spray drying TiO₂-SiO₂ colloidal solutions, whereas Ag₃PO₄ was applied by wet impregnation. XRD on the granules and SEM analysis show that the silver phosphate particles cover the surface of the titania-silica microspheres, and UV-visible diffuse reflectance analysis highlights that Ag₃PO₄/TiO₂-SiO₂ composites can absorb the entire visible light spectrum. BET measurements show higher specific surface area of the composite samples compared to bare Ag₃PO₄. Photocatalytic activity was evaluated by dye degradation tests under solar light irradiation. The prepared catalysts follow a pseudo-first-order rate law for dye degradation tests under solar light irradiation. The composite catalysts with an Ag₃PO₄/TiO₂-SiO₂ ratio of 1:1.6 wt% show better catalytic activity towards both rhodamine B and methylene blue degradation and compared with the results with uncoated TiO₂-SiO₂ microspheres and the benchmark commercial TiO₂ (Evonik-P25) as a reference. The composite photocatalyst showed exceptional efficiency compared to its pristine counterparts and reference material. This is explained as having a higher surface area with optimum light absorption capacity.

Fabrication of cerium titanate cellulose fiber nanocomposite materials for the removal of methyl orange and methylene blue from polluted water by photocatalytic degradation

In this study, cellulose fibers (Cf), extracted from sunflower seed husk, and different molar ratios of cerium titanate (Ce-Ti) NPs were prepared from sunflower seed husk extract by a green biosynthesis approach. Cf and Ce-Ti NPs were reacted via cross-linking reaction to synthesize a novel nanocomposite photocatalyst of Ce-Ti/Cf. Using Fourier-transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM-EDX) spectroscopy, all manufactured materials were characterized. The results obtained from FTIR and EDX analyses indicated that Cf and its nanocomposites (0.1 Ce-Ti/Cf, 0.3 Ce-Ti/Cf, and 0.5 Ce-Ti/Cf) were successfully prepared by harnessing biomass extract from sunflower seed husk. Furthermore, XRD revealed that the degree of crystallinity of the nanocomposites was enhanced by increasing the molar ratios of the Ce-Ti NPs. The photocatalytic activity of as-fabricated 0.1 Ce-Ti/Cf, 0.3 Ce-Ti/Cf, and 0.5 Ce-Ti/Cf nanocomposite samples was investigated on methylene blue (MB) and methyl orange (MO) dyes as model organic compounds found in wastewaters. The effects of dose, contact time, and pH on the photocatalytic activity of the synthesized nanocomposites, the photodegradation kinetic parameters of MB, and MO degradation with/without the addition of H2O2 were also studied. The results revealed that high photodegradation efficiency could be obtained as the ratio of TiO2 in the Ce-Ti nanocomposite formula increases. Moreover, after sunlight irradiation, the adsorption capacity and the dye decomposition ratio significantly increase during the early contact time and reach equilibrium at about 240 and 120 min for 0.5 Ce-Ti/Cf nanocomposite photocatalyst in the absence and presence of hydrogen peroxide, respectively. In light of the obtained results and the practical wastewater treatment study conducted, the prepared photocatalyst from Ce-Ti/Cf nanocomposites could be a promising material for treating dye wastewater especially collected from Egypt.

Nano-architectural design of TiO2 for high performance photocatalytic degradation of organic pollutant: A review

In the past several decades, significant efforts have been paid toward photocatalytic degradation of organic pollutants in environmental research. During the past years, titanium dioxide nano-architectures (TiO₂ NAs) have been widely used in water purification applications with photocatalytic degradation processes under Uv/Vis light illumination. Photocatalysis process with nano-architectural design of TiO₂ is viewed as an efficient procedure for directly channeling solar energy into water treatment reactions. The considerable band-gap values and the subsequent short life time of photo-generated charge carriers are showed among the limitations of this approach. One of these effective efforts is the using of oxidation processes with advance semiconductor photocatalyst NAs for degradation the organic pollutants under UV/Vis irradiation. Among them, nano-architectural design of TiO₂ photocatalyst (such as Janus, yolk-shell (Y@S), hollow microspheres (HMSs) and nano-belt) is an effective way to improve oxidation processes for increasing photocatalytic activity in water treatment applications. In the light of the above issues, this study tends to provide a critical overview of the used strategies for preparing TiO₂ photocatalysts with desirable physicochemical properties like enhanced absorption of light, low density, high surface area, photo-stability, and charge-carrier behavior. Among the various nanoarchitectural design of TiO₂, the Y@S and HMSs have created a great appeal given their considerable large surface area, low density, homogeneous catalytic environment, favorable light harvesting properties, and enhanced molecular diffusion kinetics of the particles. In this review was summarized the developments that have been made for nano-architectural design of TiO2 photocatalyst. Additional focus is placed on the realization of interfacial charge and the possibility of achieving charge carriers separation for these NAs as electron migration is the extremely important factor for increasing the photocatalytic activity.

Effect of Ce-Doping on Microstructure and Adsorption- Photodegradation Behaviors of the Hydrothermally-Synthesized TiO2 Nanotubes

Ce-doped TiO2 nanotubes (Ce-TNTs) were synthesized by a hydrothermal method to obtain high-efficiency adsorption and photodegradation abilities for methylene blue (MB) dye. The transmission electron microscope (TEM), X-ray diffractimeter (XRD), nitrogen adsorption, X-ray photoelectron spectrum (XPS), and photodegradation tests were used to characterize the morphology, microstructure, ionic valance, and degradation behaviors of the TNTs. Results show that the Ce-doped TNTs are composed of anatase tubulars with an inner-hole diameter of 5 nm, outer diameter of 10–15 nm, length of several hundred nanometers, and a small amount of CeO2 nanoparticles. Ce3+ and Ce4+are dissolved in the anatase crystals, the ratio of which increases with an increase in Ce addition. Ce-doping yields a higher amount of surface oxygen, which results in a strong physical and chemical adsorption to the cationoid MB. 2.5 mol% Ce-doping produces the largest specific surface area, porosity, and photoabsorption threshold and the lowest Zeta potential, yielding the highest adsorption efficiency and photocatalytic ability even under sunlight irradiation.

Enhanced disinfection of E. faecalis and levofloxacin antibiotic degradation using tridoped B-Ce-Ag TiO2 photocatalysts synthesized by ecofriendly citrate EDTA complexing method

Since its use for photochemical water splitting reported first in 1972, TiO₂ is one of the most extensively studied photocatalysts for a diverse range of applications. Monodoping or codoping of the catalyst is a proven strategy to enhance the functionality of TiO₂ under solar or visible light. However, the use of three or more dopants in the development of more efficient and visible light active photocatalysts has not been investigated widely, especially for microbial disinfection. Boron/cerium/silver tridoped TiO₂ photocatalysts with curated amounts of the dopants (B = 1, 2 at.%, Ce = 0.1 at.%, Ag = 0.06 at.%), synthesized by the ecofriendly EDTA-citrate method, were evaluated for the disinfection of water using Enterococcus faecalis under UV-A irradiation and degradation of levofloxacin antibiotic under solar light. The catalyst characterization revealed that the spherical nanoparticles had a crystallite size of ~ 13 nm and bandgap energy values of 2.8-2.9 eV. 2B-0.1Ce-0.06Ag-TiO₂ is the best catalyst for microbial disinfection with a log reduction and kinetic rate constant ~ 30 and ~ 4.5 times higher than those values determined for the other codoped or monodoped catalysts, confirming an enhanced performance. Regarding levofloxacin degradation, the best performing catalyst is 1B-0.1Ce-0.06Ag-TiO₂ with degradation of 99% and 83% COD reduction in 100 min. The tridoped photocatalysts are very effective in the inactivation of Enterococcus faecalis, thus solving the problem of antimicrobial resistance in waters containing antibiotic residues.

Photocatalytic degradation of amoxicillin and tetracycline by template synthesized nano-structured Ce3+@TiO2 thin film catalyst

Contamination of the aquatic environment with pharmaceutical compounds is a serious environmental concern. The present investigation aims to utilize the Ce³⁺/TiO₂ thin film catalyst to remove of potential antibiotics (amoxicillin and tetracycline) using the less harmful UV-A radiations. Reduced cerium ion-doped TiO₂ is obtained by a simple one-step facile template method using polyethylene glycol as the templating agent. The synthesized catalysts Ce³⁺@TiO₂ (non-template) and Ce³⁺@TiO₂(T) (template) were characterized by spectroscopic methods. The XPS reaffirms the reduced Ce³⁺ dispersed within the titania network, and the AFM showed the surface roughness of the thin films. Detailed physicochemical analyses were conducted to deduce the degradation mechanism, and repeated use of the thin film photocatalyst showed enhanced stability. Significant mineralization of the antibiotics indicates the potential applicability of the photocatalytic catalyst. Furthermore, the presence of Ce³⁺ significantly restricted the recombination of electron/hole pairs in the photo-excited TiO₂ semiconductor and showed enhanced photocatalytic degradation of the antibiotics proceeded predominantly through the •OH.

A Review on Metal Ions Modified TiO2 for Photocatalytic Degradation of Organic Pollutants

TiO2 is a semiconductor material with high chemical stability and low toxicity. It is widely used in the fields of catalysis, sensing, hydrogen production, optics and optoelectronics. However, TiO2 photocatalyst is sensitive to ultraviolet (UV) light; this is why its photocatalytic activity and quantum efficiency are reduced. To enhance the photocatalytic efficiency in the visible light range as well as to increase the number of the active sites on the crystal surface or inhibit the recombination rate of photogenerated electron–hole pairs electrons, various metal ions were used to modify TiO2. This review paper comprehensively summarizes the latest progress on the modification of TiO2 photocatalyst by a variety of metal ions. Lastly, the future prospects of the modification of TiO2 as a photocatalyst are proposed.

Tuning the photoactivity of TiO2 nanoarchitectures doped with cerium or neodymium and application to colour removal from wastewaters

The impact of cerium (Ce) and neodymium (Nd) rare-earth metal doping of TiO₂ prepared by the hydrothermal method was investigated to tailor effective photocatalytic degradation of coloured wastewater under UV or visible illumination. The hydrothermal treatment of TiO₂ decreased the pH_pzc from 6.3 to 3.1-3.8 favouring the affinity for cationic water contaminants. Doping with Ce and Nd modified the crystallinity and the morphology of the photocatalysts and significantly increased the BET surface area and the adsorption capacity of cationic dyes. The photocatalytic activity under UV light irradiation decreased due to shielding of the catalyst active area by excessive amount of dye adsorbed. Conversely, the photocatalytic activity of the Ce and Nd doped TiO₂ increased under visible light irradiation by 1.2 times as a result of the dye photosensitization effect. It was demonstrated that two-steps dark adsorption and photocatalytic reaction or one-step simultaneous adsorption and reaction can produce significantly different results for the photocatalytic degradation of dyes in coloured waters, the rate being controlled by the competitive adsorption of the reacting organics and the H₂O/OH^- species. The reaction is driven by the radical oxygen species (ROS) formed on the catalyst surface the nature of which, differs under UV or visible light irradiation. The Ce-doped TiO₂ and Nd-doped TiO₂ photocatalysts with 0.5% rare-earth content were found to be efficient in the degradation of MB in aqueous solution, removing the colour and reducing the toxicity of wastewaters.

Peroxidation and photo-peroxidation of pantoprazole in aqueous solution using silver molybdate as catalyst

In this study, silver molybdate was used as a catalyst in different oxidation processes to degrade pantoprazole (PAN) from aqueous suspension. The catalyst was synthesized using a controlled precipitation method and characterized by XRD, FTIR spectroscopy, BET analysis, Zeta potential, FEG-SEM/EDS, DRS and EPR. The α- and β-phases of Ag₂MoO₄ were identified as crystalline structure of the butterfly-shaped particles. The metastable α-phase could be completely converted into β-Ag₂MoO₄ by thermal treatment at 300 °C. The band gap energy of β-Ag₂MoO₄ (E_g = 3.25 eV) is slightly higher than for as-prepared catalyst (α-Ag₂MoO₄ + β-Ag₂MoO₄) (E_g = 3.09 eV), suggesting that as-prepared catalyst should be active under visible light. PAN is sensible to UV light irradiation, and the addition of H₂O₂ as electron acceptor enhanced the mineralization rate. In the catalytic UV-based reactions, high PAN oxidation efficiencies were obtained (>85%) but with low mineralization (32-64%). Catalytic peroxidation and photo-catalytic peroxidation under visible light showed the highest PAN oxidation efficiency, leading to its almost complete mineralization (>95%), even under dark conditions (98% in 120 min). Several degradation byproducts were identified and three mechanistic routes of PAN decomposition were proposed. The identified byproducts are less toxic than the parent compound. EPR coupled with the spin trapping method identified ^•OH radicals as the main ROS species in both photocatalytic and catalytic peroxidation reactions. Ag₂MoO₄ showed to be a promising catalyst to promote the decomposition of hydrogen peroxide into ROS.¹.

A CeO2 Semiconductor as a Photocatalytic and Photoelectrocatalytic Material for the Remediation of Pollutants in Industrial Wastewater: A Review

The direct discharge of industrial wastewater into the environment results in serious contamination. Photocatalytic treatment with the application of sunlight and its enhancement by coupling with electrocatalytic degradation offers an inexpensive and green technology enabling the total removal of refractory pollutants such as surfactants, pharmaceuticals, pesticides, textile dyes, and heavy metals, from industrial wastewater. Among metal oxide—semiconductors, cerium dioxide (CeO2) is one of the photocatalysts most commonly applied in pollutant degradation. CeO2 exhibits promising photocatalytic activity. Nonetheless, the position of conduction bands (CB) and valence bands (VB) in CeO2 limits its application as an efficient photocatalyst utilizing solar energy. Its photocatalytic activity in wastewater treatment can be improved by various modification techniques, including changes in morphology, doping with metal cation dopants and non-metal dopants, coupling with other semiconductors, and combining it with carbon supporting materials. This paper presents a general overview of CeO2 application as a single or composite photocatalyst in the treatment of various pollutants. The photocatalytic characteristics of CeO2 and its composites are described. The main photocatalytic reactions with the participation of CeO2 under UV and VIS irradiation are presented. This review summarizes the existing knowledge, with a particular focus on the main experimental conditions employed in the photocatalytic and photoelectrocatalytic degradation of various pollutants with the application of CeO2 as a single and composite photocatalyst.

Highly stable AgNPs prepared via a novel green approach for catalytic and photocatalytic removal of biological and non-biological pollutants

Increases in biological and non-biological pollutants pose a significant threat to environmental systems. In an effort to develop an effective means to treat such pollutants, the use of Phaseolus vulgaris (kidney beans) as reducing and capping agents is proposed for the green synthesis of highly stable silver nanoparticles (AgNPs) with a face-centered cubic (fcc) crystalline structure (size range: 10-20 nm). The potent role of the resulting AgNPs was found as triple platforms (photocatalyst, catalyst, and antimicrobial disinfectant). AgNPs were able to photocatalytically degrade approximately 97% of reactive red-141 (RR-141) dye within 150 min of exposure (quantum efficiency of 3.68 × 10^-6 molecule.photon^-1 and a removal reaction kinetic rate of 1.13 × 10^-2 mmol g^-1 h^-1). The role of specific reactive oxygen species (ROS) in the photocatalytic process and complete mineralization of dye was also explored through scavenger and chemical oxygen demand (COD) experiments, respectively. As an catalyst, AgNPs were also capable of reducing 4-nitrophenol to 4-aminophenol within 15 min. Overall, AgNPs showed excellent stability as catalyst and photocatalyst even after five test cycles. As an antimicrobial agent, the AgNPs are effective against both gram-positive (Bacillus subtilis) and -negative bacteria (Escherichia coli), with the zones of clearance as 15 and 18 mm, respectively. Thus, the results of this study validate the triple role of AgNPs derived via green synthesis as a photocatalyst, catalyst, and antimicrobial agent for effective environmental remediation.

Effect of the Preparation Method on the Physicochemical Properties and the CO Oxidation Performance of Nanostructured CeO2/TiO2 Oxides

Ceria-based mixed oxides have been widely studied in catalysis due to their unique surface and redox properties, with implications in numerous energy- and environmental-related applications. In this regard, the rational design of ceria-based composites by means of advanced synthetic routes has gained particular attention. In the present work, ceria–titania composites were synthesized by four different methods (precipitation, hydrothermal in one and two steps, Stöber) and their effect on the physicochemical characteristics and the CO oxidation performance was investigated. A thorough characterization study, including N2 adsorption-desorption, X-ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDS), transmission electron microscopy (TEM) and H2 temperature-programmed reduction (H2-TPR) was performed. Ceria–titania samples prepared by the Stöber method, exhibited the optimum CO oxidation performance, followed by samples prepared by the hydrothermal method in one step, whereas the precipitation method led to almost inactive oxides. CeO2/TiO2 samples synthesized by the Stöber method display a rod-like morphology of ceria nanoparticles with a uniform distribution of TiO2, leading to enhanced reducibility and oxygen storage capacity (OSC). A linear relationship was disclosed among the catalytic performance of the samples prepared by different methods and the abundance of reducible oxygen species.

Advanced oxidative processes in the degradation of 17β-estradiol present on surface waters: kinetics, byproducts and ecotoxicity

Endocrine disruptors represent risks to aquatic ecosystem and humans, and are commonly detected in surface water. Photochemical treatments can be used to remove 17β-estradiol (E2), but few studies have analyzed the kinetics, intermediates, and 17β-estradiol degradation pathways in natural matrices. In this study, the photochemical behavior of E2 under ultraviolet irradiation (UVC, 254 nm) associated with oxidants (H₂O₂ or O₃) or photocatalyst (TiO₂) was investigated to evaluate the degradation potential and the transformation pathway in a natural surface water matrix. Additionally, computational modeling analyses with Ecological Structure Activity Relationships (ECOSAR) software were performed to predict the toxicity from the E2 and its transformation byproducts. E2 degradation kinetics showed adjusted to the pseudo-first-order kinetic model, being k_UV/O3 > k_UV/TiO2 > k_UV/H2O2 > k_UV. Eight transformation byproducts were identified by liquid chromatography with time-of-flight mass spectrometry (HPLC/TOF-MS) in natural surface water samples. These byproducts formed as the result of opening the aromatic ring and adding the hydroxyl radical. The E2 degradation pathway was proposed based on the byproducts identified in this study and in previous studies, suggesting the formation of aliphatic and hydroxylated byproducts. E2 treatment presented both very toxic and not harmful byproducts.

Biogenesis of Prism-Like Silver Oxide Nanoparticles Using Nappa Cabbage Extract and Their p-Nitrophenol Sensing Activity

The present study aimed to explore the eco-friendly synthesis of prism-like silver oxide nanoparticles (Ag₂ONPs) from nappa cabbage extract and its p-nitrophenol sensing activity. The prepared Ag₂ONPs were characterized by X-ray diffraction (XRD), field-emission scanning spectroscopy (FESEM), energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet (UV)-visible light spectral analysis (UV-Vis). p-Nitrophenol sensing properties of the prepared nanoparticles were also determined using a simple I-V method. The results showed that the as-prepared Ag₂ONPs have a face-centered cubic (fcc) crystalline nature and a prism-like morphology with particle size in the range 21.61-92.26 nm. The result also showed a high intensity of the (111) facet, making the Ag₂ONP-carbon black/nickel foam electrode (Ag₂ONP-C/NFE) exhibit a high-performance response to p-nitrophenol spanning a wide range of concentrations from 1.0 mM to 0.1 pM and a response time of around 5 s, indicating a high potential for water treatment applications.

Photocatalytic effect of addition of TiO2 to acrylic-based paint for passive toluene degradation

Volatile organic compounds (VOCs) are known to be hazardous and associated with several human health problems. Thus, many technologies have been developed in recent years for their removal, such as thermal catalysis, photocatalysis and ozonization. In this study, the main objective was to evaluate the effects of incorporating titanium dioxide into an acrylic-based paint for gaseous toluene abatement. Paints with photocatalytic properties were prepared by adding TiO₂ P25 powder to an acrylic-based paint, using the following proportions: 0, 10, 15, 20 and 50 wt% (dry basis). Toluene and CO₂ concentrations at the reactor input and output were determined using GC/MS, and GC/FID, respectively, and the toluene conversion and CO₂ formation were assessed. The compounds adsorbed onto photocatalytic paints were extracted and then identified by GC/MS. The results indicated that the addition of 50 wt% of TiO₂ P25 results in a paint of reduced quality. The addition of 20 wt% of TiO₂ P25 to the paint led to higher values for the photocatalytic conversion of toluene to CO₂. The occurrence of two simultaneous processes was observed: the photocatalytic oxidation of toluene to CO₂ and the self-degradation of the organic compounds, such as polymeric acrylic, in the paint. The adsorption of different compounds onto the photocatalytic paints was identified by GC/MS analysis. The use of photocatalytic paints is a promising technique for toluene abatement, but it requires further study and improvement particularly with regard to the effects of the self-degradation of the paint.

Biosynthesized silver nanoparticles using Bacillus amyloliquefaciens; Application for cytotoxicity effect on A549 cell line and photocatalytic degradation of p-nitrophenol

The present study reports the biosynthesis of silver nanoparticles (AgNPs) using Bacillus amyloliquefaciens MSR5. The cellfree supernatant of B. amyloliquefaciens acted as a stabilizing agent for the synthesis of AgNPs. The synthesized AgNPs were characterized using UV-vis spectrophotometer, PXRD, FTIR, SEM-EDX, DLS, and TEM. TEM image showed the spherical shape of the biosynthesized AgNPs and it was found to be 20-40 nm in range. In this study, the AgNPs were prepared by ultrasonic irradiation. The stability of the AgNPs was found to be -33.4 mV using zeta potential. The catalytic 4-nitrophenol (4-NP) degradation by AgNPs was examined under solar irradiation and furthermore, the effects of several degradation parameters were studied. The biosynthesized AgNPs exhibited a strong chemocatalytic action with a comprehensive degradation (98%) of 4-NP to 4-aminophenol (4-AP) using NaBH₄ within 15 min. In addition, MTT assay was performed to evaluate the cytotoxicity of the biosynthesized AgNPs (10 - 200 μg). The results have shown that the AgNPs exhibited significant activity on A549 cells, which was dosedependent. The study elucidates the AgNPs synthesized using cellfree culture supernatant can be used for the elimination of hazardous pollutants from wastewater.