Preparation of photo-Fenton heterogeneous catalyst (Fe-TS-1 zeolite) and its application in typical azo dye decoloration

Production of vanillin via oxidation depolymerization of lignin over Fe- and Mn-modified TS-1 zeolites

Converting lignin into specific aromatic chemicals for utilization through depolymerization of lignin is an effective way to achieve high-value applications. There are many depolymerization methods that can do this, but there are problems such as harsh reaction conditions, low depolymerization efficiency and uncontrollable target products that need to be solved. This study reports a novel system for the oxidative depolymerization of alkali lignin using Fe- and Mn- modified TS-1 as a catalyst to assist in the highly selective production of vanillin. We also proposed a possible reaction pathway for the oxidative depolymerization of alkali lignin to produce vanillin catalyzed by Fe-Mn/TS-1 catalyst. The catalytic effects of TS-1, Fe/TS-1, and Fe-Mn/TS-1 catalysts on the oxidative depolymerization of lignin to produce phenolic monomers and vanillin were investigated. The results show that the modified catalysts can effectively improve the efficiency of linkage bond breaking in lignin, especially the β-O-4 bond, in which the inter-band transitions of Fe and Mn play an important role. The synergistic effect of the bimetallic-loaded catalyst (Fe-Mn/TS-1) could catalyze the oxidative depolymerization of lignin more efficiently than the monometallic-loaded catalyst (Fe/TS-1). This lignin oxidative depolymerization system produced 40.59 wt% bio-oil including 12.24 wt% phenolic monomers and 16.17 wt% re-lignin after the addition of Fe-Mn/TS-1 catalyst, owning the highest phenolic monomer yield. Surprisingly, this lignin oxidative depolymerization system exhibited high yield for vanillin (8.36 wt%) production. These results demonstrated that the Fe-Mn/TS-1 catalytic system has potential to produce vanillin from lignin under mild conditions.

Enhanced Oxidation of p-Toluidine Using Supported Zeolite Nanoparticles

Supported nanomaterials are becoming increasingly important in many industrial processes because of the need to improve both the efficiency and environmental acceptability of industrial processes. The unique properties of supported nanomaterials have attracted researchers to develop efficient catalytic materials in nanoscale. The extremely small size of the particles maximizes the surface area exposed to the reactant, allowing more reactions to occur. The environmental hazards resulting from the conventional manufacturing procedures for organic fine chemicals and intermediates by classical oxidation catalysis using mineral acids have forced chemical industries to seek less polluting processes. The present study aimed to oxidize p-toluidine by hydrogen peroxide in the presence of magnetite supported on nanocrystalline titanium silicalite-1 (M/NTS) zeolite at ambient temperature. The products detected are 4,4'-dimethylazobenzene as major product and 4,4'-dimethylazoxybenzene as minor product. Good selectivity, low cost, low wastage of materials and enhanced environmental friendliness of heterogeneous magnetite nanoparticle supported zeolite catalysts were observed. The effect of various reaction parameters such as mole ratio, catalyst weight and reusability of catalyst were studied. At the optimum reaction conditions, the oxidation activity of M/NTS catalyst was compared with M/NS catalyst, and it was found that titanium in the framework of M/NTS provided higher activity and selectivity.

Visible-light-driven iron-based heterogeneous photo-Fenton catalysts for wastewater decontamination: A review of recent advances

Visible-light-driven heterogeneous photo-Fenton process has emerged as the most promising Fenton-derived technology for wastewater decontamination, owing to its prominent superiorities including the potential utilization of clean energy (solar light), and acceleration of ≡Fe(II)/≡Fe(III) dynamic cycle. As the core constituent, catalysts play a pivotal role in the photocatalytic activation of H₂O₂ to yield reactive oxidative species (ROS). To date, all types of iron-based heterogeneous photo-Fenton catalysts (Fe-HPFCs) have been extensively reported by the scientific community, and exhibited satisfactory catalytic performance towards pollutants decomposition, sometimes even exceeding the homogeneous counterparts (Fe(II)/H₂O₂). However, the relevant reviews on Fe-HPFCs, especially from the viewpoint of catalyst-self design are extremely limited. Therefore, this state-of-the-art review focuses on the available Fe-HPFCs in literatures, and gives their classification based on their self-characteristics and modification strategies for the first time. Two classes of representative Fe-HPFCs, conventional inorganic semiconductors of Fe-containing minerals and newly emerging Fe-based metal-organic frameworks (Fe-MOFs) are comprehensively summarized. Moreover, three universal strategies including (i) transition metal (TMs) doping, (ii) construction of heterojunctions with other semiconductors or plasmonic materials, and (iii) combination with supporters were proposed to tackle their inherent defects, viz., inferior light-harvesting capacity, fast recombination of photogenerated carriers, slow mass transfer and low exposure and uneven dispersion of active sites. Lastly, a critical emphasis was also made on the challenges and prospects of Fe-HPFCs in wastewater treatment, providing valuable guidance to researchers for the reasonable construction of high-performance Fe-HPFCs.

Iron-nickel bimetallic metal-organic frameworks as bifunctional Fenton-like catalysts for enhanced adsorption and degradation of organic contaminants under visible light: Kinetics and mechanistic studies

Iron-nickel bimetallic organic frameworks (FeNi_X-BDC, H₂BDC: terephthalic acid) were developed as bifunctional materials for adsorption and photo-Fenton degradation of organic dyes with different charge properties. Significantly enhanced adsorption capacity of FeNi_1/15-BDC towards methylene blue (MB) and methyl orange (MO) was achieved, 5.3 and 2.6 times higher than that of pristine Fe-BDC, which was attributed to enlarged specific surface area and pore volume and the decreased surface charges induced by Ni doping. The adsorption kinetics demonstrated that chemisorption was dominant and intra-particle diffusion was the rate-controlling step. Two-stage degradation including slow induction stage and rapid oxidation stage fitted with pseudo-zero-order kinetics well. The increased rate constants (2.472 vs. 1.188 min^-1 for MB; 0.616 vs. 0.421 min^-1 for MO) in the induction stage as well as the superior removal capability by asynchronism relative to synchronism jointly corroborating the improved adsorption performance was favor for subsequent degradation. Notably, this heterogeneous system not only exhibited obvious advantages like wider pH working range (3-9), better stability and reusability of catalysts, but also achieved the dual objectives of in-situ decontamination and adsorbent regeneration. The coupling of adsorption and degradation along with synergism between photocatalysis and Fenton-like process are responsible for the reinforced removal of organic contaminants.

Enhancing the Fenton-like Catalytic Activity of nFe2O3 by MIL-53(Cu) Support: A Mechanistic Investigation

A novel Fenton-like catalyst was synthesized by immobilizing nano-Fe₂O₃ (nFe₂O₃) on MIL-53(Cu). The pseudo-first-order rate constant of bisphenol A degradation in the nFe₂O₃/MIL-53(Cu)/H₂O₂ system reached 0.0123 min^-1, while the values in MIL-53(Cu)/H₂O₂ and nFe₂O₃/H₂O₂ systems were only 0.0026 and 0.0040 min^-1, respectively. The characterization of nFe₂O₃/MIL-53(Cu) reveals that the supreme catalytic activity of this material could be ascribed to iron-copper synergy, smaller size, and better dispersion of nFe₂O₃ particles. Moreover, a method of trapping Cu(I) by neocuproine was developed, which could shield Cu(I) from interacting with iron and H₂O₂, and thus allow quantitative differentiation of the contribution to the enhanced catalytic activity by each of the factors. Using this method, 19% of the enhancement was determined to be contributed by synergistic effect, while 24% of the enhancement was due to the smaller size and better dispersion of the nFe₂O₃ particles on MIL-53(Cu) support. In addition, the performance of nFe₂O₃/MIL-53(Cu) only dropped 10.7% after five treatment cycles in real wastewater, showing good potential in practical application. We believe this study sheds light on the tailored design of Fenton-like catalysts and elucidates the catalytic mechanisms of supported bimetallic catalysts.

Photocatalytic Performance and Degradation Pathway of Rhodamine B with TS-1/C3N4 Composite under Visible Light

TS-1/C3N4 composites were prepared by calcining the precursors with cooling crystallization method and were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), UV-Vis diffuse reflection spectrum (DRS) and nitrogen adsorption-desorption isotherm. The photocatalytic performance of TS-1/C3N4 composites was investigated to degrade Rhodamine B (RhB) under visible light irradiation. The results showed that all composites exhibited better photocatalytic performance than pristine TS-1 and C3N4; TS-1/C3N4-B composite (the measured mass ratio of TS-1 to C3N4 is 1:4) had best performance, with a rate constant of 0.04166 min-1, which is about two and ten times higher than those of C3N4 and TS-1, respectively. We attributed the enhanced photocatalytic performance of TC-B to the optimized heterostructure formed by TS-1 and C3N4 with proper proportion. From the results of photoluminescence spectra (PL) and the enhanced photocurrent, it is concluded that photogenerated electrons and holes were separated more effectively in TS-1/C3N4 composites. The contribution of the three main active species for photocatalytic degradation followed a decreasing order of ·O2-, ·OH and h+. The degradation products of RhB were identified by liquid chromatography tandem mass spectrometry (LC-MS/MS), and the possible photocatalytic degradation pathways were proposed.

Parameters affecting LED photoreactor efficiency in a heterogeneous photo-Fenton process using iron mining residue as catalyst

In this article, a light-emitting diode (LED)-based photoreactor was designed and evaluated for degradation of the antibiotic sulfathiazole (STZ), using heterogeneous photo-Fenton process with an iron ore residue as catalyst. The effects of the type of magnetic stirrer bar, use of baffles, rotation speed, and type and intensity of irradiation source were evaluated. The results showed that the degradation of STZ was strongly influenced by rotation speed (1100 rpm) and that the use of an octagonal stirrer bar favoured high dispersion and greater contact of the catalyst with the reaction medium. Although the presence of baffles had little influence on STZ degradation, their use enabled good dispersion of the catalyst (due to axial flow) and eliminated the vortex formed at high stirring speeds. It was found that the iron mining residue could be activated by UV LEDs, visible light LEDs, and black light irradiation, with similar degradation efficiencies achieved. Using the LEDs, STZ concentrations below the detection limit were obtained after 40 min, with power consumption 38-fold (UV LEDs) and 22-fold (visible light LEDs) lower than required for black light irradiation. The results demonstrated the advantages of the use of LED devices as irradiation systems in heterogeneous photo-Fenton processes.

Seed-assisted synthesis of TS-1 crystals containing Al with high catalytic performances in cyclohexanone ammoximation

In this study, titanium silicalite (TS-1) crystals containing Al were synthesized using aluminosilicate MFI zeolites as seeds in a tetrapropylammonium bromide (TPAB)–ethanolamine (EA) system. The TS-1 containing Al possessed large size, large L_b value and higher catalytic activity in cyclohexanone ammoximation. Larger L_b value would endow the TS-1 crystals with better mechanical strength and erosion resistance. The introduction of an Al atom into the TS-1 crystals resulted in the production of more acid sites and a bit strong Brönsted acid sites; these acid sites were more favorable to the catalytic performances in cyclohexanone ammoximation.

Using aluminosilicate zeolites seeds, Al atoms are introduced into the TS-1 crystals, resulting in high L_bvalue and more acid sites, which improve the catalytic activity in cyclohexanone ammoximation.