Fabrication of the metal-free biochar-based graphitic carbon nitride for improved 2-Mercaptobenzothiazole degradation activity

Photocatalytic degradation of p-aminobenzoic acid on N-biomass charcoal etched with Fe-Al-bilayer hydroxide: New insights through spectroscopic investigation

We investigated the photocatalytic property of etched iron‑aluminum layered double hydroxide (LDH) composites using urea-modified biochar (N-BC) carrier to degrade para-aminobenzoic acid (PABA), a refractory organic pollutant. The prepared FeAl-LDH@FeSx-N-BC composite exhibited excellent photocatalytic performance, attributed to the enhanced photogenerated charge-carrier separation by the etched LDH and the improved comparative surface areas by the doped N-BC. The composite photocatalytically degraded 96 % of PABA. The performance was affected by solute concentration, pH and photocatalyst dose. Adding p-benzoquinone and EDTA-2Na significantly decreased the degradation rate, suggesting that superoxide radicals and holes were co-involved in PABA degradation. The excellent PABA removal efficiency was consistent for three consecutive runs. The samples' reactive oxygen species was confirmed, as electron paramagnetic reverberation explained the photodegradation mechanism. Under xenon lamp irradiation, two PABA photocatalytic degradation pathways were proposed using Liquid Chromatograph Mass Spectrometer (LCMS) and density functional theory. As expected, FeAl-LDH@FeSx-N-BC showed excellent photocatalytic performance, expanding a new direction and possibility for future photocatalytic treatment of water pollutants.

Enhanced Cr (VI) reduction and removal by Fe/Mn oxide biochar composites under acidic simulated wastewater

Chromium (Cr (VI)) can cause severe damage to the ecosystem and humans because of its toxicity. In this paper, the adsorbed Fe/Mn ions Bacillus cereus ZNT-03, lotus seeds, and graphene oxide were co-cultured as the raw materials. Fe/Mn oxide biochar composite (FMBC) was prepared to treat Cr (VI) by one-step pyrolysis. FMBC has high-density micropores, and the average pore size is about 0.82 nm. Fe (II), Mn (II), and N-containing functional groups could serve as electron donors for Cr (VI) reduction. The removal of Cr (VI) is monolayer chemisorption and pH-dependent. The maximum adsorption capacity of FMBC is 21.25 mg g^-1. Cr (VI) is reduced and adsorbed on FMBC by physical adsorption, reduction, complexation, electrostatic attraction, and coprecipitation. The contribution ratio of the reduction mechanism to Cr (VI) is 72.25%. The packed column and regeneration experiments indicated that FMBC had excellent adsorption stability even after soaking in acidic simulated wastewater after 180 days (pH 1.5). These results indicate that FMBC can provide rapid reduction and efficient adsorption for Cr (VI), making it possible to apply in water treatment.

The effects of g-C3N4/biochar and g-C3N4 on bacterial community in riverbed sediment

Biochar had been widely used to improve the activity of photocatalysts, the biochar-based photocatalysts had more potential for environmental pollution remediation, but their effect on the sediment remained unknown. To understand these, the typical photocatalyst g-C₃N₄ was modified by biochar to develop g-C₃N₄/biochar with enhanced photocatalytic ability. Riverbed sediment was exposed to g-C₃N₄ and g-C₃N₄/biochar respectively for 30 days, and Illumina sequencing was utilized to examine the changes in the bacterial community in the sediment. The results showed that in riverbed sediment, g-C₃N₄ exposure had a concentration-dependent effect on the diversity of bacteria, while g-C₃N₄/biochar exposure had a slight influence on the bacterial diversity and the diversity almost maintained stable with different g-C₃N₄/biochar concentration. The application of g-C₃N₄ exhibited an inhibition influence on the growth of Acidobacteria, Gemmatimonadetes, and Rokubacteria in sediment, whose relative abundance increased when g-C₃N₄ was 25 mg/kg, and then decreased when g-C₃N₄ beyond this concentration. The presence of g-C₃N₄/biochar increased the relative abundance of Cyanobacteria in sediment and showed no obvious impact on other dominant phyla. Both g-C₃N₄ and g-C₃N₄/biochar could alter the levels of TP, NN, and AN in the sediment, but the magnitude of the changes of these physicochemical factors caused by g-C₃N₄/biochar was much smaller than those caused by g-C₃N₄. In addition, the complexity of the bacterial community network was reduced in a high concentration of g-C₃N₄, while it remained stable with different concentrations of g-C₃N₄/biochar treatments. Totally, this study demonstrated that, compared to g-C₃N₄, g-C₃N₄/biochar was able to maintain the relative stability of the bacterial community in riverbed sediment and mitigate the negative effects of photocatalysts to some extent, making biochar an ecological remediation agent with great potential for application.

Novel assembly of BiVO4@N-Biochar nanocomposite for efficient detoxification of triclosan

The wide spread of antibacterial and antifungal agents demands in growing multifunctional materials to completely eliminate these organic contaminants in water. BiVO₄ (Bismuth vanadate) is a superior catalyst under visible light but suffers with high photoelectron-hole pair recombination rate and poor adsorption capacity which limits its efficiency. Addition of N-doped Biochar (N-Biochar) to BiVO₄ with large specific surface area and high conductivity are anticipated to overcome the problem and promote the catalytic performance. Thus, the present study developed a simple hydrothermal method to prepare BiVO₄@N-Biochar catalyst for efficient detoxification of Triclosan (TCS). The morphological analysis results suggested that BiVO₄ particles were evenly distributed on carbon surface amongst the N-Biochar matrix. Within 60 min of visible light irradiation, nearly 94.6% TCS degradation efficiency was attained by BiVO₄@N-Biochar (k = 0.02154 min^-1) while only 56.7% was attained with pure BiVO₄ (k = 0.00637 min^-1). In addition, LC-MS/MS technique was utilized to determine the TCS degradation products generation in the photodegradation process and pathway was proposed. Furthermore, the E. coli (Escherichia coli) colony forming unit assay was used to determine the biotoxicity of the degradation products in which 72.3 ± 2.6% of detoxification efficiency was achieved and suggested a substantial reduction in biotoxicity during the photodegradation.

Efficient degradation of various emerging pollutants by wild type and evolved fungal DyP4 peroxidases

The accumulation of emerging pollutants in the environment remains a major concern as evidenced by the increasing number of reports citing their potential risk on environment and health. Hence, removal strategies of such pollutants remain an active area of investigation. One way through which emerging pollutants can be eliminated from the environment is by enzyme-mediated bioremediation. Enzyme-based degradation can be further enhanced via advanced protein engineering approaches. In the present study a sensitive and robust bioanalytical liquid chromatography-tandem mass spectrometry (LCMSMS)-based approach was used to investigate the ability of a fungal dye decolorizing peroxidase 4 (DyP4) and two of its evolved variants—that were previously shown to be H₂O₂ tolerant—to degrade a panel of 15 different emerging pollutants. Additionally, the role of a redox mediator was examined in these enzymatic degradation reactions. Our results show that three emerging pollutants (2-mercaptobenzothiazole (MBT), paracetamol, and furosemide) were efficiently degraded by DyP4. Addition of the redox mediator had a synergistic effect as it enabled complete degradation of three more emerging pollutants (methyl paraben, sulfamethoxazole and salicylic acid) and dramatically reduced the time needed for the complete degradation of MBT, paracetamol, and furosemide. Further investigation was carried out using pure MBT to study its degradation by DyP4. Five potential transformation products were generated during the enzymatic degradation of MBT, which were previously reported to be produced during different bioremediation approaches. The current study provides the first instance of the application of fungal DyP4 peroxidases in bioremediation of emerging pollutants.

Novel broad-spectrum-driven g-C3N4 with oxygen-linked band and porous defect for photodegradation of bisphenol A, 2-mercaptophenthiazole and ciprofloxacin

Abundant active oxygen free radicals could efficiently remove refractory organic pollutants. In previous research, the original carbon nitride can form more hydrogen peroxide, however, owing to the limitation of its band structure, the original carbon nitride cannot decompose the hydrogen peroxide to generate more active oxygen free radicals. Herein, this work reports a simple bottom-up synthesis method, which synthesize a broad-spectrum-response carbon nitride (CN-CA) with oxygen-linked band and porous defect structure, while adjusting the band structure, and the introduction of the oxygen-linked band structure can also decompose the hydrogen peroxide produced by the original carbon nitride to form more active oxygen free radicals. Instrumental characterization and analysis of experimental results revealed the important role of oxygen-linked band and porous defects in adjusting the CN-CA energy band structure and improving its visible light absorption. The optimal CN-CA displays an outstanding photocatalytic degradation ability, that degradation rate of bisphenol A (BPA) reaches 99.8% within 150 min, the reaction rate constant of which is 6.77 times higher than that of pure g-C₃N₄, as also demonstrated with 2-mercaptophenthiazole (MBT) and ciprofloxacin (CIP). Meanwhile, the excellent degradation performance under blue LED (450-462 nm) and green LED (510-520 nm) exhibits the broad-spectrum characteristics of CN-CA. The degradation pathways of BPA and MBT were analyzed via HPLC-MS. Moreover, the primary active species were detected as O₂^-, OH and h⁺ based on the trapping experiments and ESR. This research provides a new strategy for g-C₃N₄ modified by porous defects and oxygen-linked band structure for environmental remediation.

Biochar-Based Graphitic Carbon Nitride Adorned with Ionic Liquid Containing Acidic Polymer: A Versatile, Non-Metallic Catalyst for Acid Catalyzed Reaction

A novel biochar-based graphitic carbon nitride was prepared through calcination of Zinnia grandiflora petals and urea. To provide acidic and ionic-liquid functionalities on the prepared carbon, the resultant biochar-based graphitic carbon nitride was vinyl functionalized and polymerized with 2-acrylamido-2-methyl-1-propanesulfonic acid, acrylic acid and the as-prepared 1-vinyl-3-butylimidazolium chloride. The final catalytic system that benefits from both acidic (-COOH and -SO3H) and ionic-liquid functionalities was applied as a versatile, metal-free catalyst for promoting some model acid catalyzed reactions such as Knoevenagel condensation and Biginelli reaction in aqueous media under a very mild reaction condition. The results confirmed high activity of the catalyst. Broad substrate scope and recyclability and stability of the catalyst were other merits of the developed protocols. Comparative experiments also indicated that both acidic and ionic-liquid functionalities on the catalyst participated in the catalysis.

Novel Bi2WO6 loaded N-biochar composites with enhanced photocatalytic degradation of rhodamine B and Cr(VI)

In this work we report the production of Bi₂WO₆ loaded N-biochar composites (BW/N-B) for the removal of rhodamine-B and the reduction of Cr(VI) in water. Biochar was treated with urea to produce a N-modified biochar (N-Biochar), with great conductivity and special 2D sheet platform structure. Materials with different ratios of biochar and urea were produced. These materials were used as platform for supporting Bi₂WO₆. The characteristics of the as-prepared composites were investigated in detail by X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Fourier Transform Infrared spectra (FT-IR), UV-vis diffuse reflectance spectra (UV-DRS), Photoluminescence spectra (PL), Electrochemical Impedance Spectroscopy (EIS) and Mott-Schottky curves. After loading N-Biochar, the band gaps of the as-prepared composites were narrower than those of Bi₂WO₆, which could improve separation and migration of photogenerated electron-hole pairs of BW/B-N under visible-light excitation, enhancing photocatalytic activity. BW/N1-B (ratio of urea to biochar 2:1 and 1 g/L) exhibited excellent photocatalytic activity for the degradation of 10 mg/L Rhodamine B (RhB) (99.1 %, 45 min) and reduction of Cr(VI) (96.7 %, 30 min) under visible-light irradiation. The results will provide a novel theoretical foundation on the application of biochar for photocatalysis and environmental remediation.

A novel Strategy of Lock-in Effect between Conjugated Polymer and TiO2 towards Dramatic Enhancement of Photocatalytic Activity under Visible Light

To design novel conjugated polymers and improve interfacial interaction with semiconductor is one of directions to develop high-efficient photocatalysts with harvesting photons and boosting catalytic activities. Herein, two novel linear conjugated polymers poly[(thiophene-ethylene-thiophene)-thiophene] (PTET-T) and poly[(thiophene-ethylene-thiophene)-thiophene-3-carboxylic acid] (PTET-T-COOH) were successfully synthesized by a simple Stille coupling reaction. Their heterojunction with TiO2, i.e, PTET-T/TiO2 (C1) and PTET-T-COOH/TiO2 (C2), exhibited outstanding photocatalytic activity for degrading Rhodamine B, methylene blue and tetracycline. The energetic "lock-in effect" between PTET-T-COOH and TiO2 through carboxyl groups and hydroxyl groups interaction has been proved to greatly improve the interface charge transfer ability and suppress the electron-hole recombination in PTET-T-COOH/TiO2. Thus, by regulating the dosage of polymers, the 15% PTET-T-COOH/TiO2 showed the optimized photocatalytic activity with excellent chemical stability, and its kinetic rate constant was determined to be 41.7 times of that of TiO2. This work provided a new effective strategy of designed and explored organic semiconductor-inorganic heterojunction photocatalysts with broaden absorption, repeatability and high-charge mobility.

Coupling adsorption-photocatalytic reduction of Cr(VI) by metal-free N-doped carbon

The efficient removal of toxic hexavalent chromium (Cr(VI)) is crucial for waste water treatment. Herein, we report a new strategy to couple adsorption and in situ photo-reduction of Cr(VI) to Cr (III) using metal-free, N-doped carbon facilely derived from naturally abundant biomass cellulose. Experimental results exhibited the removal rate of Cr(VI) can be significantly enhanced from 43.25 mg/g to 98.25 mg/g after visible light irradiation under acidic conditions. We demonstrated that toxic Cr(VI) ions were firstly adsorbed on N-doped carbon via electrostatic attraction, and then photo-reduced into Cr(III), followed by re-adsorption through chemical complexation. The carbon sp²-hybridized structures and electro-attracting graphic-N groups (N-(C)₃) are proposed to be responsible for this photo-reduction effect. This work reveals the efficient removal of heavy metals through the cooperative adsorption and photo-reduction using the materials synthesized from biomass waste.

Recent Progress in Biochar-Based Photocatalysts for Wastewater Treatment: Synthesis, Mechanisms, and Applications

Biochar (BC) is a carbon-rich material produced from pyrolysis of biomass. In addition to its low toxicity, environmental compatibility, and low cost, BC has the desired advantages of well-developed mesoporous structure and abundant surface functional groups. In recent years, BC-based photocatalysts (BCPs) have played a significant role in many environmental fields. In this paper, we highlight the current progress and several exciting results of BCPs by focusing on their synthesis, characterization, mechanisms, and applications in wastewater treatment. Details on various preparation methods include sol–gel, hydrothermal/solvothermal, ultrasound, calcination, and in situ methods are summarized and discussed. The underlying mechanisms and the applications of BCPs for different semiconductors are reviewed. Furthermore, some future trends and potentials are outlined.

Application of biochar and its composites in catalysis

With a wide range of raw materials, low cost and large specific surface area, biochar has been widely used in environmental remediation. However, the biochar has a saturated adsorption capacity when it is used as a pollutant adsorbent. Recent efforts have been made to prepare biochar and biochar-based catalysts with enhanced catalytic properties to expand their potential applications. The environmental persistent free radicals (EPFRs) of biochar could react with O₂ to induce hydroxyl radicals (•OH) without the addition of oxidants. When oxidants were added, biochar and biochar-based catalysts could activate them to generate •OH and sulfate radicals (SO₄•^-), respectively. Moreover, biochar could act as an electron acceptor to improve the photodegradation capacity of catalysts. With reference to the information regarding biochar and biochar-based catalysts, this work provides a critical review on recent research development as follows: 1) the preparations of various types of biochar and biochar-based catalysts are summarized; 2) the effects of the synthetic conditions and transition metals on the catalytic activity of biochar-based catalysts are discussed; (3) methods for characterizing the active sites of the biochar-based catalysts are described; and (4) the environmental applications of biochar and biochar-based catalysts are discussed with regards to three aspects based on the interaction mechanisms, namely, oxidation, reduction, and photocatalysis. The synthesis conditions and loading of metal/metal-free catalyst are key parameters controlling the catalysis activity of biochar and biochar-based catalysts. This review provides new insights into the application of biochar in catalysis. Key challenges and further research directions are proposed as well.

Integrated adsorption and photocatalytic degradation of volatile organic compounds (VOCs) using carbon-based nanocomposites: A critical review

Volatile organic compounds (VOCs) are harmful for human and surrounding ecosystem, and a great number of VOC abatement technologies have been developed during the past few decades. However, the single method has some problems such as high energy consumption, unfriendly environment, and low removal efficiency. Recently, the integration of adsorption and photocatalytic degradation of VOCs is considered as a promising one. Carbon material, with large surface area, high adsorption capacity, and fast electron transfer ability, is widely used in integrated adsorptive-photocatalytic removal of VOCs. It is thus crucial to digest and summarize recent research advances in carbon-based nanocomposites as the adsorbent-photocatalyst for VOC removal. To satisfy this need, this work provides a critical review of the related literature with focuses on: (1) the advantages and disadvantages of various carbon-based nanocomposites for the applications of VOC adsorption and photocatalytic degradation; (2) models and mechanisms of adsorptive-photocatalytic removal of VOCs according to the material properties; and (3) major factors controlling adsorption-photocatalysis processes of VOCs. The review is aimed to establish the "structure-property-application" relationships for the development of innovative carbon-supported nanocomposites and to promote future research on the integrated adsorptive and photocatalytic removal of VOCs.

Visible photodegradation of ibuprofen and 2,4-D in simulated waste water using sustainable metal free-hybrids based on carbon nitride and biochar

Rational designing of metal-free carbon nitride based photocatalysts can lead to an excellent optical response and a higher photocatalytic activity driven by visible and solar light. This combines green photocatalytic technology with greener materials prepared by facile approaches for environmental remediation. Herein we report utilization of star photocatalyst g-C₃N₄ (CN) to form highly efficient hetero-assemblies along with acidified g-C₃N₄ (ACN), polyaniline (PANI), reduced graphene oxide (RGO) and biochar. By use of these organic semiconductors we synthesize g-C₃N₄/ACN/RGO@Biochar (GARB), g-C₃N₄/PANI/RGO@Biochar (GPRB) and ACN/PANI/RGO@Biochar (APRB) nano-assemblies with different optical response and band edge positions for a better charge flow and reduced recombination of carriers. These synthesized catalysts were used for visible light powered degradation of 2,4-Dichlorophenoxy acetic acid (2,4-D) and ibuprofen (IBN). APRB performs the best and degrades 99.7% and 98.4% of 2,4-D and IBN (20 mg L^-1) under Xe lamp exposure in 50 min and retention of high activity in natural sunlight. Optical analysis, photoelectrochemical response and radical quenching studies show both hydroxyl and superoxide radical anions as major reactive species and a Z-scheme photocatalytic mechanism. RGO acts as an electron mediator and protects higher positioned bands of PANI and ACN in APRB for a remarkable photocatalytic activity for a metal free material. The degradation pathway was analyzed by LC-MS analysis and 42% and 40% total organic carbon was removed in 2 h for 2,4-D and IBN degradation respectively. The toxicity of degraded products was analyzed by analyzing viability of human peripheral blood cells with retaining of 99.1% cells.

The fabrication of a biomass carbon quantum dot-Bi2WO6 hybrid photocatalyst with high performance for antibiotic degradation

A novel biomass carbon quantum dots@Bi₂WO₆ photocatalyst was prepared by a dialysis-assisted hydrothermal method for the photocatalytic degradation of antibiotics.

Fabrication of magnetic g-C3N4 for effectively enhanced tetracycline degradation with RGO as mediator

In the present work, the ternary hybrid photocatalyst Fe₃O₄@g-C₃N₄/RGO is developed by a facile hydrothermal method, which shows a satisfactory degradation rate (90%) and stability in degrading tetracycline.

Fabrication of a visible-light In2S3/BiPO4 heterojunction with enhanced photocatalytic activity

The construction of a heterojunction is an effective way to improve the photocatalytic activity of a semiconductor.