Selective photodegradation of atrazine by a novel molecularly imprinted nanophotocatalyst prepared on the basis of chitosan

The construction of highly selective surface molecularly imprinted polymers based on Cu(II) coordination for the detection of bisphenol A

Herein, we designed and constructed a highly selective MIPs for bisphenol A (BPA) named Cu-MIPs@CS based on Cu(II) coordination. The synthesis of Cu-MIPs@CS employed a dummy template strategy and surface imprinting technology, with chitosan (CS) as the substrate linked to imprinted layers via Cu2+ bridging. 4-vinylpyridine acted as the functional monomer, capable of forming a complex with the template ketoprofen, while ethylene glycol dimethacrylate served as the cross linker. Cu-MIPs@CS exhibited a significantly enhanced imprinting factor of 14.78 for BPA, which was approximately 6.6 times higher than that of imprinted materials without Cu2+ (MIPs@CS). Cu-MIPs@CS exhibited a selective factor of 12.74 towards resorcinol, which possessed identical functional groups but a smaller size than BPA, representing an enhancement of selectivity by 12.25-fold compared to MIPs@CS. More importantly, Cu-MIPs@CS exhibited a superior discrimination ability between BPA and its structural analogue, diphenolic acid, with an excellent selective factor of 2.93, highlighting its significance in distinguish the structural analogue of BPA. In contrast, MIPs@CS lack sufficient selectivity to differentiate between them. Through exploration of adsorption mechanism of Cu-MIPs@CS, it was demonstrated that the incorporation of Cu2+ significantly reduced nonspecific adsorption, but also facilitated the creation of more selective imprinted cavities by introducing metal coordination, thereby notably enhancing the selectivity of Cu-MIPs@CS. Finally, the developed Cu-MIPs@CS were applied as the solid phase extraction adsorbent and combined with HPLC-DAD detection to establish an analytical method towards BPA in drinking water samples. The limit of detection of the method was 0.14 μg L-1 and recoveries ranged from 95.6 % to 101 %. This work provided broad prospects for construction of highly selective MIPs and accurate quantification of trace amounts of BPA.

Enhancement in photocatalytic selectivity of TiO2-based nano-catalyst through molecular imprinting technology

Improvement in the photocatalytic selectivity is imperative for the effective and efficient utilization of catalysts. In this study, a molecularly imprinted polymer-coated iron-doped titanium dioxide (Fe-TiO2@MIP) nanocomposite was successfully synthesized by precipitation polymerization while using RB-19 as a template. The synthesized nanocomposites (Fe-TiO2@MIP and Fe-TiO2@NIP) were characterized by Fourier transform infrared spectroscopy (FT-IR), atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM) with energy dispersive X-ray (EDX), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer-EMMETT-Teller (BET), and UV-visible spectrophotometry. The optimized binding experiments revealed a high imprinting factor of 5.0 for RB-19. The catalytic degradation efficiency and selectivity of Fe-TiO2@MIP enhanced to almost complete degradation of RB-19 from 70% for the parent Fe-TiO2 and 76% for Fe-TiO2@NIP. An outstanding degradation selectivity of RB-19 was achieved compared to other competitive dyes. Finally, the analysis of the non-degraded and degraded RB-19 by ESI-MS revealed the presence of different intermediates that fits well with the proposed degradation mechanism. The study opens new possibilities of selective photo-degradation of targeted contaminants that may ultimately lead to efficient use of photocatalysts.

Unveiling the Latest Developments in Molecularly Imprinted Photocatalysts: A State-of-the-Art Review

Responding to the growing concerns about environmental pollutants, scientists are increasingly turning to innovative solutions rooted in the field of environmental science. One such promising avenue combines the robustness of traditional photocatalysis with the precision of molecular imprinting, leading to the proposition of molecularly imprinted photocatalysts (MIPCs). These MIPCs hold the potential to specifically target and eliminate environmental pollutants, marking them as a promising tool in modern environmental remediation. As researchers delve deeper into this field, the design and optimization of MIPCs have become hotbeds for scientific inquiry. This comprehensive overview delves into the multifaceted approaches to MIPC design, elucidating on aspects like the selection of appropriate photocatalytic bases, the pivotal role of templates, the choice of monomeric building blocks, and the integration of effective cross-linking agents. However, as with all burgeoning technologies, the development of MIPCs is not without its challenges. These potential impediments to the successful innovation and implementation of MIPCs are also explored.

A core/shell TiO2 magnetized molecularly imprinted photocatalyst (MMIP@TiO2): synthesis and its photodegradation activity towards sulfasalazine

Although the selectivity of TiO₂ for the degradation of target molecules is not enough, it is a broadly employed photocatalyst for the degradation of many pollutants. Molecularly imprinted compounds owing to their extreme recognition specificity have become increasingly popular for preparing selective photocatalysts. In this work, based on molecularly imprinted magnetized TiO₂ (MMIP@TiO₂), a selective photocatalyst was prepared. Via the co-precipitation method, Fe₃O₄ particles were prepared and coated respectively by SiO₂, vinyl end groups, and molecularly imprinted polymers (MIP). The synthesized photocatalyst was characterized by the X-ray diffraction method (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive x-ray spectrometry (EDX), vibrating sample magnetometry (VSM), high-performance liquid chromatography (HPLC), and photoluminescence analysis (PL). The photocatalyst was then used to degrade the sulfasalazine pharmaceutical pollutant under UV irradiation. An average crystallite size of 9 nm was obtained for the MMIP@TiO₂ sample from the Scherrer formula and 34.5 nm by the Williamson-Hall formula. The results revealed that compared to the non-imprinted counterpart, the molecularly imprinted photocatalyst had significantly higher efficiency and selectivity for the degradation of target molecules. The process was forwarded with 90% efficiency within 10 min. Optimal conditions were 10.0 min irradiation when 25 mL SSZ solution (50 mg/L), 0.07 g/L catalyst dose, and pH 6.0 were applied. The maximum removal efficiency was calculated to be 92%. The external magnetic field quickly removed the photocatalyst from the solution and regenerated it. It was revealed that after each regeneration cycle, the efficiency dropped. Nevertheless, 63% of the preliminary effectiveness remained after four regeneration steps.

Chitosan-based molecularly imprinted photoelectric sensor with ZnO/Bi2O3/Bi2S3 sensing layer for thiamethoxam determination

A molecularly imprinted photoelectrochemical sensor with high sensitivity and stable structure was constructed and applied to detect thiamethoxam pesticide. ZnO/Bi₂O₃/Bi₂S₃ heterojunction photoelectric material was formed on the fluorine-doped tin oxide (FTO) electrode by seed layer growth, drip coating, and in situ ion exchange. A chitosan-imprinted polymer membrane was prepared using chitosan as the functional monomer, glutaraldehyde as the cross-linking agent, and thiamethoxam as the template molecule. The photoelectric material was characterized by X-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy analyses. The electron transfer mechanism of Z-type heterojunction was verified by ultraviolet-visible curve and Mott-Schottky curve. When thiamethoxam was re-adsorbed on the imprinted membrane, the current recorded at 0 V (vs. Ag/AgCl) was reduced because the thiamethoxam molecule blocked the electron transfer. The molecularly imprinted sensor exhibited a linear relationship to thiamethoxam concentration in the range from 7.0 × 10^-13 mol/L to 7.0 × 10^-10 mol/L and the detection limit was 3.32 × 10^-13 mol/L, which is lower than the values reported by other detection methods. Most pesticides, such as propoxur and isoprocarband carbaryl, do not interfere with the determination. The sensor also showed good practicability and suitability for the determination of trace thiamethoxam in environmental water and soil leaching solutions, with a recovery of 99.6-102.1% (RSD < 3.74%). A novel molecularly imprinted photoelectrochemical (MI-PEC) sensor with high sensitivity and selectivity for the determination of thiamethoxam (TMX) was developed. A Z-type heterojunction ZnO/Bi₂O₃/Bi₂S₃ photoelectric material was synthesized for the first time. The MI-PEC sensor was prepared with ZnO/Bi₂O₃/Bi₂S₃ as the sensitive material and MI membrane as the recognition element. The sensor exhibits an extremely sensitive response to thiamethoxam with a detection limit of 3.32 × 10^-13 mol/L due to the excellent photoelectrochemical properties of ZnO/Bi₂O₃/Bi₂S₃.

Targeted degradation of refractory organic compounds in wastewaters based on molecular imprinting catalysts

Efficient removal of low-concentration refractory pollutants is a crucial problem to ensuring water safety. The use of heterogeneous catalysis of molecular imprinting technology combined with traditional catalysts is a promising method to improve removal efficiency. Presently, the research into molecular imprinting targeting catalysts focuses mainly on material preparation and performance optimization. However, more researchers are investigating other applications of imprinting materials. This review provides recent progress in photocatalyst preparation, electrocatalyst, and Fenton-like catalysts synthesized by molecular imprinting. The principle and control points of target catalysts prepared by precipitation polymerization (PP) and surface molecular imprinting (S-MIP) are introduced. Also, the application of imprinted catalysts in targeted degradation of drugs, pesticides, environmental hormones, and other refractory pollutants is summarized. In addition, the reusability and stability of imprinted catalyst in water treatment are discussed, and the possible ecotoxicity risk is analyzed. Finally, we appraised the prospects, challenges, and opportunities of imprinted catalysts in the advanced oxidation process. This paper provides a reference for the targeted degradation of refractory pollutants and the preparation of targeted catalysts.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

Construction of natural polymeric imprinted materials and their applications in water treatment: A review

Molecularly imprinted materials (MIMs) have been widely used in various fields, including water treatment, chemical sensing, and biotechnology, because of their specific recognition and high selectivity. MIMs are usually obtained via two successive steps, namely, (1) copolymerization and crosslinking reactions of the preassembled complex of comonomers and a specific target compound (2) and thorough removal of template molecules. Some functional polymers are directly used as supporting materials and functional groups assembled with target compound are provided to simplify the preparation of MIMs. Natural polymers, such as chitosan, cyclodextrin, sodium alginate, starch, cellulose, lignin and their derivatives, are good candidates because of their environmentally friendly properties, low costs, and abundant active functional groups. In this study, different methods for the preparation of natural polymeric MIMs were reviewed in terms of the construction of microscopic binding cavities and macroscopic visible condensed structures with different shapes. Natural polymeric MIMs in water treatment applications, such as adsorption and detection of various pollutants from aqueous solutions, were summarized. Prospects on the development of novel and high-performance natural polymeric MIMs were discussed to overcome the difficulties in their preparation and applications.

Removal of atrazine from aqueous solutions onto a magnetite/chitosan/activated carbon composite in a fixed-bed column system: optimization using response surface methodology

In this study, a magnetite/chitosan/activated carbon (MCHAC) composite is proposed as an efficient adsorbent for the removal of atrazine from aqueous solutions. The prepared composite was characterized using Fourier-transform infrared (FTIR) and X-ray diffraction (XRD) methods. Response surface methodology (RSM) coupled with composite central design (CCD) were used to optimize the effects of the four independent variables, pH, initial concentration of atrazine (C₀), bed depth (H), and flow rate (Q), which influence the adsorption process. The experimental results modeled using response surface methodology (RSM) coupled with central composite design (CCD) (RSM–CCD) indicated a quadratic relationship with p < 0.0001 for adsorption capacity at saturation (q_s) and fraction of bed utilization (FBU). The results of the experiments performed under the optimized conditions, pH = 5.07, C₀ = 137.86 mg L⁻¹, H = 2.99 cm and Q = 1.038 mL min⁻¹, showed a q_s value of 62.32 mg g⁻¹ and FBU of 72.26%, with a deviation value of less than 0.05 from the predicted q_s and FBU values. The obtained breakthrough curves were fitted with four mathematical models, Thomas, Bohart–Adams, Yan and Yoon–Nelson, in order to determine the limiting step of the mass transfer of the atrazine adsorption onto the composite. A desorption study of the composite revealed the high reuse potential for MCHAC, thus, the prepared material could be used as a low-cost and efficient adsorbent for the decontamination of polluted wastewater.

In this study, a magnetite/chitosan/activated carbon (MCHAC) composite is proposed as an efficient adsorbent for the removal of atrazine from aqueous solutions.