Simulated solar light driven performance of nanosized ZnIn2S4/dye system: decolourization vs. photodegradation

Persistent production of multiple active species with copper doped zinc gallate nanoparticles for light-independent photocatalytic degradation of organic pollutants

Photocatalysis is considered as an environmentally friendly and sustainable method as it can produce active species to degrade pollutants. However, its applications are hindered by the turbidity of pollutants and the requirements for continuous or repeated in situ irradiation. To avoid the need for continuous in situ irradiation in the photocatalytic process, herein we report the doping of Cu(II) ions into zinc gallate (ZnGa2O4) as traps to capture photo-generated electrons. In this way, long lifetime charge release and separation were effectively achieved for the persistent degradation of organic dyes in wastewater. The Cu(II) doped ZnGa2O4 (ZGC) nanoparticles with a small size about 7.7 nm synthesized via a hydrothermal method exhibited a persistent photocatalytic activity with continuous production of reactive oxygen species for at least 96 h without in situ irradiation due to its unique electronic structure and carrier transport path, and enabled to degrade 82.2 % of rhodamine B in 1 h. Further investigation revealed that the doped Cu(II) ions occupied the octahedral sites of ZGC and highly increased the persistent production and availability of active species for the persistent degradation of organic dyes under pre-illuminated conditions.

Study of Photocatalytic Oxidation of Micropollutants in Water and Intensification Case Study

During the last decades, heterogenous photocatalysis has shown as the most promising advanced oxidation process for the removal of micropollutants due to degradation rate, sustainability, non-toxicity, and low-cost. Synergistic interaction of light irradiation, photocatalysts, and highly reactive species are used to break down pollutants toward inert products. Even though titanium dioxide (TiO2) is the most researched photocatalyst, to overcome shortcomings, various modifications have been made to intensify photocatalytic activity in visible spectra range among which is modification with multiwalled carbon nanotubes (MWCNTs). Therefore, photocatalytic oxidation and its intensification by photocatalyst’s modification was studied on the example of four micropollutants (diclofenac, DF; imidacloprid, IMI; 1-H benzotriazole, BT; methylene blue, MB) degradation. Compound parabolic collector (CPC) reactor was used as, nowadays, it has been considered the state-of-the-art system due to its usage of both direct and diffuse solar radiation and quantum efficiency. A commercially available TiO2 P25 and nanocomposite of TiO2 and MWCNT were immobilized on a glass fiber mesh by sol-gel method. Full-spectra solar lamps with appropriate UVB and UVA irradiation levels were used in all experiments. Photocatalytic degradation of DF, IMI, BT, and MB by immobilized TiO2 and TiO2/CNT photocatalysts was achieved. Mathematical modelling which included mass transfer and photon absorption was applied and intrinsic reaction rate constants were estimated: kDF=3.56 × 10−10s−1W−0.5m1.5, kIMI=8.90 × 10−11s−1W−0.5m1.5, kBT=1.20 × 10−9s−1W−0.5m1.5, kMB=1.62 × 10−10s−1W−0.5m1.5. Intensification of photocatalysis by TiO2/CNT was observed for DF, IMI, and MB, while that was not the case for BT. The developed model can be effectively applied for different irradiation conditions which makes it extremely versatile and adaptable when predicting the degradation extents throughout the year using sunlight as the energy source at any location.

Direct Z-scheme FeVO4/BiOCl heterojunction as a highly efficient visible-light-driven photocatalyst for photocatalytic dye degradation and Cr(VI) reduction

In this work, potential applications of a direct Z-scheme FeVO₄/BiOCl heterojunction for photocatalytic degradation of organic dyes (methylene blue, MB and rhodamine B, RhB) and reduction of hexavalent chromium (Cr(VI)) ion under visible light irradiation were reported. Firstly, FeVO₄ and BiOCl were synthesized by using a microwave heating method. Then, the FeVO₄/BiOCl nanocomposites with different weight percentages of FeVO₄ (1, 3, 6.25, 12.5 and 25%wt) were fabricated by a method of modified wet impregnation. The photocatalytic degradation activities of the nanocomposites were investigated in parallel with pure BiOCl and FeVO₄. Among the as-prepared nanocomposites, the FeVO₄/BiOCl nanocomposite with 6.25%wt of FeVO₄ exhibited the highest photocatalytic dye degradation efficiency; 99.8% of RhB was degraded after being irradiated for 360 min, while 87.2% of MB was degraded. Similarly, this nanocomposite photocatalytically reduced 97.8% of Cr(VI) at a pH value of 3. The superior photocatalytic activity can be ascribed to the effective visible light absorption of the FeVO₄/BiOCl heterojunction and the suppression of the recombination process of photogenerated electron-hole pairs. Additionally, the improved charge migration and separation efficiencies between FeVO₄ and BiOCl through the direct Z-scheme charge transfer pathway are involved, as evidenced by the trapping experiments, and the UV-visible diffuse reflectance (UV-vis DRS), photoluminescence spectroscopy (PL) and electrochemical impedance spectroscopy analyses. Photocatalytic mechanisms of the direct Z-scheme FeVO₄/BiOCl heterojunction for the photodegradation of RhB and photoreduction of Cr(VI) have been proposed and discussed in greater detail.