A new thiophene-based dual functional chemosensor for ultrasensitive colorimetric detection of Cu2+ in aqueous solution and highly selective fluorimetric detection of Al3+ in living cells

Highly Sensitive and Selective Recognition of Zn2⁺ and Fe2⁺ Ions Using a Novel Thiophene-Derived Hydrazone Dual Fluorometric Sensor

The selective detection of Zn2⁺ and Fe2⁺ ions is critical in environmental and biological studies. Schiff base chemosensors hold promise, but exploration of thiophene-derived variants remains limited. This work introduces a novel thiophene-derived Schiff base sensor (TBH), synthesized through the condensation reaction of thiophene-2-carboxaldehyde with benzil-bis-hydrazone, for the selective detection of Zn2⁺ and Fe2⁺ ions. TBH exhibits remarkable selectivity, with a significant 185-fold fluorescence enhancement for Zn2⁺ and complete quenching 99% for Fe2⁺, allowing for distinct detection of both ions. Notably, TBH demonstrates high binding affinity towards Zn2⁺ and Fe2⁺, even in the presence of competing cations, forming stable 1:1 complexes. This finding is supported by absorption and emission titration studies and FT-IR analysis as well. This easily synthesized, rapid and cost-effective sensor offers a promising approach for sensitive and differentiated dual detection of Zn2⁺ and Fe2⁺ in environmental and biological systems.

Chemically modified graphitic carbon nitride nanosheets for the selective turn-off fluorescence detection of Al(III) ions in crabs (Brachyura)

The selective and sensitive detection of Al(III) is critically important for human health since the level of Al(III) is an indicator of many diseases in humans. Herein, we developed a simple and sensitive fluorescent sensor for the detection of Al(III) in an aqueous solution based on the fluorescence of hydroxyl-functionalized graphitic carbon nitride nanosheets (HO/g-CN). OH/g-CN nanosheets were synthesized via the thermal pyrolysis of 1,3,5-triazine-2,4,6-triamine (as raw material) at 550 °C for 2 hours, followed by thermal alkali treatment at 730 °C for 2 min. The fluorescence of HO/g-CN at 377 nm (at 290 nm excitation) can be quenched by Al(III) effectively and selectively, and the linear relationship between the concentration of Al(III) and fluorescence intensity is in the range of 1.85-14.82 μM with a detection limit of 0.272 μM. The fluorescence turn-off effect of the Al(III) ion on the prepared HO/g-CN nanosheets could be attributed to the presence of oxygen- and nitrogen-containing functional groups on the surface of HO/g-CN that have chelating interactions with Al(III), leading to quenching. The surface functional groups of OH/g-CN were confirmed using different characterization techniques (FTIR, EDX, and XPS). Moreover, the prepared HO/g-CN exhibited remarkable long-term fluorescence stability in water (>30 days) and minimal toxicity. Importantly, a prepared novel fluorescent sensor (HO/g-CN) was successfully applied for the detection and determination of Al(III) in commercially available crab (Brachyura) samples.

Colorimetric and Fluorometric N-Acylhydrazone-based Chemosensors for Detection of Single to Multiple Metal Ions: Design Strategies and Analytical Applications

The development of optical sensors for metal ions has gained significant attention due to their broad applications in biology, the environment, and medicine. Colorimetric and fluorometric detection methods are particularly valued for their simplicity, cost-effectiveness, high detection limits, and analytical power. Among various chemical probes, the hydrazone functional group stands out for its extensive study and utility, owing to its ease of synthesis and adaptability. This review provides a comprehensive overview of N-acylhydrazone-based probes, serving as highly effective colorimetric and fluorometric chemosensors for a diverse range of metal ions. Probes are categorized into single-ion, dual-ion, and multi-ion chemosensors, each further classified based on the detected metal(s). Additionally, the review discusses detection modes, detection limits, association constants, and spectroscopic measurements.

Ethyl 3-aminobenzo[b]thiophene-2-carboxylate Derived Ratiometric Schiff Base Fluorescent Sensor for the Recognition of In3+ and Pb2

An ethyl 3-aminobenzo[b]thiophene-2-carboxylate derived ratiometric Schiff base fluorescent sensor R was devised and synthesized. R exhibited a highly sensitive and selective ratiometric response to In3+ in DMF/H2O tris buffer solution. R exhibited a colorimetric/fluorescent dual-channel response to In3+. More importantly, R can distinguish In3+ from Ga3+ and Al3+ in less than 5 min. R exhibited a good linear correlation with the concentration of In3+ in the 5-25 μM range and the limit of detection for In3+ was found to be 8.36 × 10-9 M. According to the job`s plot and MS spectra, R formed a complex with In3+ at 1:2 with a complexation constant of 8.24 × 109 M2. Based on Gaussian theory calculations, the response mechanism of R to In3+ can be explained by photo-induced electron transfer (PET) and intramolecular charge transfer (ICT) mechanisms. In addition, R can be used for the detection of indium in tap water with satisfactory recoveries. Meanwhile, R displayed a linear relationship to micromolar concentrations (0-50 μM) of Pb2+ and recognized Pb2+ in a ratiometric response with a detection limit of 8.3 × 10-9 M.

A pyridine modified naphthol hydrazone Schiff base chemosensor for Al3+ via intramolecular charge transfer process

A pyridine modified naphthol hydrazone Schiff base chemosensor, NaPy, was prepared in a two-step process to detect aluminum ion (Al3+) in different samples. The probe shows a turn-off emission response towards Al3+ at a 1:1 binding stoichiometry via intramolecular charge transfer (ICT) mechanism, as validated by density functional theory (DFT) calculations and a series of spectroscopic measurements. The response time is slightly over one minute with a limit of detection (LOD) value of 0.164 µM, demonstrating the great sensitivity of the probe. It is also found that NaPy exhibits high selectivity towards Al3+ and resists interference from seventeen other cations. Application investigations in paper strips, water samples and HeLa cells suggest that NaPy can be used as an efficient probe for sensing Al3+ in real environmental samples and biosystems.

Method for highly selective, ultrasensitive fluorimetric detection of Cu2+ and Al3+ by Schiff bases containing o-phenylenediamine and o-aminophenol

Schiff base probes (1 and 2) made from o-phenylenediamine and o-aminophenol were appeared as highly selective fluorimetric chemosensor of Cu²⁺ and Al³⁺ ions respectively. Strong fluorescence emission of probe 1 at 415 nm (excitation at 350 nm) was instantly turned off on addition of Cu²⁺. Very weak fluorescence of probe 2 at 506 nm (excitation at 400 nm) was immediately turned on specifically by Al³⁺. Job's plot and ESI-MS results suggested 1:1 molar stoichiometric ratio of metal ion and probe in their respective complexes. Probe 1 and 2 had demonstrated very low detection limit (9.9 and 2.5 nM respectively). Binding of Cu²⁺ with probe 1 was found chemically reversible on addition of EDTA, while complexation between Al³⁺ and probe 2 was not reversible. On the basis of density functional theory (DFT) and spectroscopic results, probable mode of sensing of the metal ions by the probes were proposed. Quenching of the fluorescence of probe 1 by Cu²⁺ was attributed to the extensive transfer of charge from the probe molecule to paramagnetic copper ion. Whereas, in the Al³⁺-complex of probe 2, photo-induced electron transfer (PET) process from the imine nitrogen to salicylaldehyde moiety was restricted and thereby the weak emission intensity of probe 2 was enhanced significantly. Effective pH range of sensing the metal ions by probe 1 and 2 were 4 to 8 and 6 to 10 respectively. Probe 1 was also applied in the design of a logic gate for Cu²⁺ detection. Moreover, probe 1 and 2 was also used in water sample analysis for quantitative estimation of Cu²⁺ and Al³⁺ respectively.

NIR squaraine dyes for dual colorimetric and fluorescent determination of Fe3+, Cu2+, and Hg2+ ions

Four benzoindolenine-based squaraine dyes (SQs), which have the advantages of intense visible and near-infrared (NIR) absorption and emission (λ_abs/max 663-695 nm, λ_em/max 686-730 nm) were synthesized and characterized by UV-vis absorption, fluorescent emission spectrophotometry, FTIR, NMR and HRMS analysis. Among them, BBSQ showed excellent performance, which exhibited high selectivity to Fe³⁺, Cu²⁺, and Hg²⁺ in acetonitrile solution even in the presence of other competitive metal ions, accompanied by obvious color change easily detected by the naked eye. The detection limit was 14.17 μM for Fe³⁺ and 6.06 μM for Cu²⁺. Most importantly, the response mechanism of BBSQ to Fe³⁺, Cu²⁺, and Hg²⁺ involves the coordination of BBSQ and metal ions through the O atom on the central squarate ring, N atom, and olefin π bond of BBSQ and has been demonstrated by Job's plot, FTIR, and ¹H NMR titration analyses. Furthermore, BBSQ was applied successfully to detect Fe³⁺, Cu²⁺, and Hg²⁺ in thin-layer chromatography (TLC) plates with good precision and is quite promising for the quantitative detection of Fe³⁺ and Cu²⁺ ions in water samples.

An effective long-wavelength fluorescent sensor for Cu2+ based on dibenzylidenehydrazine-bridged biphenylacrylonitrile

Although numerous fluorescence sensors for Cu²⁺ have been presented, a long-wavelength sensor in aqueous media has rarely been reported as expected due to practical application requirements. In this work, a novel AIE molecule (DHBB) containing two biphenylacrylonitrile units bridged by dibenzylidenehydrazine was prepared. It possessed the merits of long-wavelength emission, good emission in aqueous media, and multiple functional groups for binding Cu²⁺. It exhibited good sensing selectivity for Cu²⁺ among all kinds of tested metal ions. The detection limit was as low as 1.08 × 10^-7 M. The sensing mechanism was clarified as 1:1 stoichiometric ratio based on the binding cooperation of O and N functional groups of DHBB. The selective sensing ability for Cu²⁺ remained stable at pH = 5-9 and was influenced little by other metal ions. The Cu²⁺ sensing ability of DHBB was applied in real samples with 96% recovery rate. The bio-imaging experiment of living cells suggested that DHBB possessed not only good bio-imaging performance but also sensing ability for Cu²⁺ in living environments. This work suggested the good application prospect of DHBB to sense Cu²⁺ in real samples and living environment.

A Comprehensive Review on Thiophene Based Chemosensors

The recognition and sensing of various analytes in aqueous and biological systems by using fluorometric or colorimetric chemosensors possessing high selectivity and sensitivity, low cost has gained enormous attention. Furthermore, thiophene derivatives possess exceptional photophysical properties compared to other heterocycles, and therefore they can be employed in chemosensors for analyte detection. In this review, we have tried to explore the design and detection mechanism of various thiophene-based probes, practical applicability, and their advanced models (design guides), which could be thoughtful for the synthesis of new thiophene-based probes. This review provides an insight into the reported chemosensors (2008-2020) for thiophene scaffold as effective emission and absorption-based chemosensors.

Recent advances in the development of fluorescent chemosensors for Al3

Detection of Al3+ has become important as it is related to several health issues and other problems. Different fluorophoric platforms, such as naphthalene, benzene, rhodamine, etc., have been explored to sense Al3+ and a good number of research articles are being published. This article focuses on the synthesis of recently reported aluminum sensors constructed from 2-hydroxy-1-naphthaldehyde, salicylaldehyde, rhodamine, coumarin and different metal based-MOFs.

The Role of 8-Amidoquinoline Derivatives as Fluorescent Probes for Zinc Ion Determination

Mass-spectrometry-based and X-ray fluorescence-based techniques have allowed the study of the distribution of Zn2+ ions at extracellular and intracellular levels over the past few years. However, there are some issues during purification steps, sample preparation, suitability for quantification, and the instruments' availability. Therefore, work on fluorescent sensors based on 8-aminoquinoline as tools to detect Zn2+ ions in environmental and biological applications has been popular. Introducing various carboxamide groups into an 8-aminoquinoline molecule to create 8-amidoquinoline derivatives to improve water solubility and cell membrane permeability is also a recent trend. This review aims to present a general overview of the fluorophore 8-aminoquinoline and its derivatives as Zn2+ receptors for zinc sensor probes. Various fluorescent chemosensor designs based on 8-amidoquinoline and their effectiveness and potential as a recognition probe for zinc analysis were discussed. Based on this review, it can be concluded that derivatives of 8-amidoquinoline have vast potential as functional receptors for zinc ions primarily because of their fast reactivity, good selectivity, and bio-compatibility, especially for biological applications. To better understand the Zn2+ ion fluorophores' function, diversity of the coordination complex and geometries need further studies. This review provides information in elucidating, designing, and exploring new 8-amidoquinoline derivatives for future studies for the improvement of chemosensors that are selective and sensitive to Zn2+.

New thiophene hydrazide dual-functional chemosensor: Colorimetric sensor for Cu2+ & fluorescent sensor for Al3

A new thiophene hydrazide derivative TSB was synthesized and utilized as naked-eye colorimetric sensor for Cu²⁺ by the color changed from colorless to yellow as well as green fluorescent turn on sensor for Al³⁺ in DMSO/H₂O (1/1, V/V) solution. The dual-functional chemosensor TSB for Cu²⁺/Al³⁺ sensing displayed excellent properties of special selectivity, superior sensitivity, outstanding anti-interference performance, instantaneous response, wide pH working range and good reversibility. The detection limits of TSB for Cu²⁺/Al³⁺ were determined as low as 46.5 nM and 32.7 nM, respectively. The 1:1 binding mode of TSB with Cu²⁺/Al³⁺ was proved by spectrometric titrations, Job's plots, FTIR, ¹H NMR and HRMS analysis. Moreover, chemosensor TSB was successfully utilized for detection of Cu²⁺ and Al³⁺ in real environmental water and food samples with high reliability, demonstrating its practical applicability.

A novel phenolphthalein-based fluorescent sensor for Al3+ sensing in drinking water and herbal tea samples

In this study, 3,3-bis(4-hydroxy-3-((E)-((4-hydroxyphenyl)imino)methyl) phenyl)isobenzofuran-1(3H)-one (HMBP) was designed as a ''turn-on″ fluorogenic chemosensor to detect Al³⁺. Studies were performed in C₂H₅OH-HEPES (v/v, 9/1, pH 7.0) media at λ_em = 475 nm. The LOD value was found to be 0.113 µM. The stoichiometric ratio of HMBP-Al³⁺ was determined as 1:2 by Job's plot and ESI-MS as well as ¹H NMR titration. The binding constant of chemosensor HMBP with Al³⁺ from the Benesi-Hildebrand equation was determined to be 1.21 × 10⁸ M^-1. The quantum (Φ) yields were obtained as 0.040 and 0.775 for the chemosensor HMBP and HMBP-Al³⁺, respectively. The response of the chemosensor HMBP towards Al³⁺ was attributed to the strategies of blocking the photo-induced electron transfer (PET) and CN isomerisation mechanisms. Finally, the sensing of the chemosensor HMBP for the determination of Al³⁺ in real food samples, drinking waters and herbal teas, were employed.

Bithiophene-based fluorescent sensor for highly sensitive and ultrarapid detection of Hg2+ in water, seafood, urine and live cells

Using Hg²⁺-promoted deprotection reaction, we have developed a new fluorescent turn-on sensor 2TS based on bithiophene fluorophore for Hg²⁺ detection. The sensing mechanism of 2TS towards Hg²⁺ was strongly proved by ¹H NMR, FTIR, HRMS, UV-vis and fluorescence spectra. Remarkly, 2TS towards Hg²⁺ in 100% aqueous solution shows high sensitivity with a low detection limit of 19 nM, superior selectivity and ultra-rapid response of 20 s during a wide sensing pH range from 4 to 10. Taking advantage of the excellent properties, the low-cost sensor 2TS-based filter paper/TLC test strips were fabricated for visual, immediate and quantitative detection of Hg²⁺ in water, proving its applicability towards sensitive in-situ and on-site detection. Meanwhile, 2TS showed high analytical performance for Hg²⁺ detection in water, seafood as well as human urine samples. Moreover, thanks to the good water solubility, negligible cytotoxicity, good biocompatibility and cell-membrane permeability, 2TS was further applied to effectively image Hg²⁺ in live cells. Furthermore, the developed sensor 2TS acted as good fluorescent display material for Hg²⁺ with obvious color change.

Experimental and Theoretical Studies on a Simple S-S-Bridged Dimeric Schiff Base: Selective Chromo-Fluorogenic Chemosensor for Nanomolar Detection of Fe2+ & Al3+ Ions and Its Varied Applications

A simple S-S (disulfide)-bridged dimeric Schiff base probe, L, has been designed, synthesized, and successfully characterized for the specific recognition of Al3+ and Fe2+ ions as fluorometric and colorimetric "turn-on" responses in a dimethylformamide (DMF)-H2O solvent mixture, respectively. The probe L and each metal ion bind through a 1:1 complex stoichiometry, and the plausible sensing mechanism is proposed based on the inhibition of the photoinduced electron transfer process (PET). The reversible chemosensor L showed high sensitivity toward Al3+ and Fe2+ ions, which was analyzed by fluorescence and UV-vis spectroscopy techniques up to nanomolar detection limits, 38.26 × 10-9 and 17.54 × 10-9 M, respectively. These experimental details were advocated by density functional theory (DFT) calculations. The practical utility of the chemosensor L was further demonstrated in electrochemical sensing, in vitro antimicrobial activity, molecular logic gate function, and quantification of the trace amount of Al3+ and Fe2+ ions in real water samples.