Protolytic behavior of water-soluble zinc(II) porphyrin and the electrocatalytic two-electron water oxidation to form hydrogen peroxide

Bioinspired Tetranuclear Manganese Cubane Complex as an Efficient Molecular Electrocatalyst for Two-Electron Water Oxidation Towards Hydrogen Peroxide

Stable homogeneous two-electron water oxidation electrocatalysts are highly demanded to understand the precise mechanism and reaction intermediates of electrochemical H2O2 production. Here we report a tetranuclear manganese complex with a cubane structure which can electrocatalyze water oxidation to hydrogen peroxide under alkaline and neutral conditions. Such a complex demonstrates an optimal Faradaic efficiency (FE) of 87 %, which is amongst (if not) the highest FE(H2O2) of reported homogeneous and heterogeneous electrocatalysts. In addition, active species were identified and co-catalysts were excluded through ESI-MS characterization. Furthermore, we identified water binding sites and isolated one-electron oxidation intermediate by chemical oxidation of the catalyst in the presence of water substrates. It is evident that efficient proton-accepting electrolytes avoid rapid proton building-up at electrode and substantially improve reaction rate and selectivity. Accordingly, we propose a two-electron catalytic cycle model for water oxidation to hydrogen peroxide with the bioinspired molecular electrocatalyst. The present work is expected to provide an ideal platform to elucidate the two-electron WOR mechanism at the atomic level.

Binuclear Metal Phthalocyanines with Enhanced Activity in the Oxygen Evolution Reaction: A First-Principles Study

The rational design of efficient catalysts for the electrochemical oxygen evolution reaction (OER) critically relies on a comprehensive understanding of the reaction mechanisms. Herein, the alkaline OER on planar mononuclear metal phthalocyanines (MPc, where M = Mn, Co, Fe, and Ni) and binuclear metal phthalocyanines (bi-MPc) is studied using density functional theory (DFT) methods. Both FePc and bi-CoPc exhibit enhanced stability and OER activity, with the energy required for the leaching of central metal being as high as 2.28 and 2.45 eV and the overpotentials of the OER being 0.48 and 0.57 V, respectively. Through electronic structure analysis, it is found that, in the OER process of bi-MPc, the large macrocyclic ligand and metal ions not bonding with the intermediate can serve as hole reservoirs. Intermediate species are further stabilized by the dispersal of a positive charge, reducing the free energy. These findings underscore the significance of macrocyclic ligands in the rate-determining step of the OER catalyst.

Super-Oxidizing Covalent Triazine Framework Electrocatalyst for Two-Electron Water Oxidation to H2 O2

Electrochemical two-electron water oxidation (2e WOR) is gaining surging research traction for sustainable hydrogen peroxide production. However, the strong oxidizing environment and thermodynamically competitive side-reaction (4e WOR) posit as thresholds for the 2e WOR. We herein report a custom-crafted covalent triazine network possessing strong oxidizing properties as a proof-of-concept metal-free functional organic network electrocatalyst for catalyzing 2e WOR. As the first-of-its-kind, the material shows a maximum of 89.9 % Faradaic Efficiency and 1428 μmol/h/cm2 H2 O2 production rate at 3.0 V bias potential (vs reversible hydrogen electrode, RHE), which are either better or comparable to the state-of-the-art electrocatalysts. We have experimentally confirmed a stepwise 2e WOR mechanism which was further computationally endorsed by density functional theory studies.

Photocatalytic and Electrocatalytic Generation of Hydrogen Peroxide: Principles, Catalyst Design and Performance

Hydrogen peroxide (H2O2) is a high-demand organic chemical reagent and has been widely used in various modern industrial applications. Currently, the prominent method for the preparation of H2O2 is the anthraquinone oxidation. Unfortunately, it is not conducive to economic and sustainable development since it is a complex process and involves unfriendly environment and potential hazards. In this context, numerous approaches have been developed to synthesize H2O2. Among them, photo/electro-catalytic ones are considered as two of the most promising manners for on-site synthesis of H2O2. These alternatives are sustainable in that only water or O2 is required. Namely, water oxidation (WOR) or oxygen reduction (ORR) reactions can be further coupled with clean and sustainable energy. For photo/electro-catalytic reactions for H2O2 generation, the design of the catalysts is extremely important and has been extensively conducted with an aim to obtain ultimate catalytic performance. This article overviews the basic principles of WOR and ORR, followed by the summary of recent progresses and achievements on the design and performance of various photo/electro-catalysts for H2O2 generation. The related mechanisms for these approaches are highlighted from theoretical and experimental aspects. Scientific challenges and opportunities of engineering photo/electro-catalysts for H2O2 generation are also outlined and discussed.

Molecular Characteristics of Water-Insoluble Tin-Porphyrins for Designing the One-Photon-Induced Two-Electron Oxidation of Water in Artificial Photosynthesis

Faced with the new stage of water oxidation by molecular catalysts (MCs) in artificial photosynthesis to overcome the bottle neck issue, the "Photon-flux density problem of sunlight," a two-electron oxidation process forming H₂O₂ in place of the conventional four-electron oxidation evolving O₂ has attracted much attention. The molecular characteristics of tin(IV)-tetrapyridylporphyrin (SnTPyP), as one of the most promising MCs for the two-electron water oxidation, has been studied in detail. The protolytic equilibria among nine species of SnTPyP, with eight pK_a values on the axial ligands' water molecules and peripheral pyridyl nitrogen atoms in both the ground and excited states, have been clarified through the measurements of UV-vis, fluorescence, ¹H NMR, and dynamic fluorescence decay behaviour. The oxidation potentials in the Pourbaix diagram and spin densities by DFT calculation of the one-electron oxidized form of each nine species have predicted that the fully deprotonated species ([SnTPyP(O^-)₂]^2-) and the singly deprotonated one ([SnTPyP(OH)(O^-)]^-) serve as the most favourable MCs for visible light-induced two-electron water oxidation when they are adsorbed on TiO₂ for H₂ formation or SnO₂ for Z-scheme CO₂ reduction in the molecular catalyst sensitized system of artificial photosynthesis.

Understanding the factors governing the water oxidation reaction pathway of mononuclear and binuclear cobalt phthalocyanine catalysts

The rational design of efficient catalysts for electrochemical water oxidation highly depends on the understanding of reaction pathways, which still remains a challenge. Herein, mononuclear and binuclear cobalt phthalocyanine (mono-CoPc and bi-CoPc) with a well-defined molecular structure are selected as model electrocatalysts to study the water oxidation mechanism. We found that bi-CoPc on a carbon support (bi-CoPc/carbon) shows an overpotential of 357 mV at 10 mA cm⁻², much lower than that of mono-CoPc/carbon (>450 mV). Kinetic analysis reveals that the rate-determining step (RDS) of the oxygen evolution reaction (OER) over both electrocatalysts is a nucleophilic attack process involving a hydroxy anion (OH⁻). However, the substrate nucleophilically attacked by OH⁻ for bi-CoPc is the phthalocyanine cation-radical species (Co^II–Pc–Pc˙⁺–Co^II–OH) that is formed from the oxidation of the phthalocyanine ring, while cobalt oxidized species (Pc–Co^III–OH) is involved in mono-CoPc as evidenced by the operando UV-vis spectroelectrochemistry technique. DFT calculations show that the reaction barrier for the nucleophilic attack of OH⁻ on Co^II–Pc–Pc˙⁺–Co^II–OH is 1.67 eV, lower than that of mono-CoPc with Pc–Co^III–OH nucleophilically attacked by OH⁻ (1.78 eV). The good agreement between the experimental and theoretical results suggests that bi-CoPc can effectively stabilize the accumulated oxidative charges in the phthalocyanine ring, and is thus bestowed with a higher OER performance.

bi-CoPc can stabilize accumulated oxidative charges in phthalocyanine ring, which leads to the OER proceeding through a nucleophilic attack of OH^- on the phthalocyanine cation-radical species that is formed from the oxidation of phthalocyanine ring.

Optically Transparent Colloidal Dispersion of Titania Nanoparticles Storable for Longer than One Year Prepared by Sol/Gel Progressive Hydrolysis/Condensation

The molecular catalyst sensitized system (MCSS), where an excited molecular catalyst adsorbed on a semiconductor such as TiO₂ injects electrons to the conduction band of the semiconductor leading to hydrogen evolution/CO₂ reduction coupled with an oxidation of water on the molecular catalyst, has been one of the most probable candidates in the approach to artificial photosynthesis. For a full utilization of visible light, however, a serious light scattering of the aqueous suspension of TiO₂ in the visible region, which is generally experienced, should be avoided. Here, we report a preparation of optically transparent colloidal dispersion of TiO₂ by the sol/gel reaction of TiCl₄ through progressive hydrolysis/condensation under the basic condition without any calcination processes. The TiO₂ nanoparticles (TiO₂(NPs)) obtained were characterized as an amorphous particle (∼10-15 nm) having a microcrystal domain of anatase within several nm by XRD, Raman spectroscopies, XRF, XAFS, TG/DTA, and HRTEM, respectively. The energy-resolved distribution of carrier electron traps in TiO₂(NPs) as a fingerprint of TiO₂ was characterized through reversed double-beam photo-acoustic spectroscopy to have a close similarity to that of TiO₂(ST-01) as well as the observation of carrier traps by transient absorption spectroscopy. Though the powder TiO₂(NP) itself was not dispersed well in aqueous solution, the wet TiO₂(NPs) as prepared before being dried up provided a completely transparent aqueous dispersion under the acidic condition (1 M HCl). Addition of methanol enabled the colloidal dispersion (TiO₂(NPs, MeOH/H₂O, 0.1 M HCl)) to keep the optical transparency for longer than 1 year (550 days), which is the first example of TiO₂ dispersion storable for such a long period. TiO₂(NPs, MeOH/H₂O) exhibited a moderate photocatalytic reactivity of H₂ evolution with a quantum yield of ∼2.6% upon 365 nm light irradiation. An optically transparent thin film of TiO₂(NPs, MeOH/H₂O) was also successfully prepared on a glass plate to exhibit an enhanced hydrophilicity upon UV light irradiation.