Fluorescent and electrochemical detection of Cu (II) ions in aqueous environment by a novel, simple and readily available AIE probe

A Commercially Available 2-aminoanthracene Fluorescent Probe for Rapid and Sensitive Detection of Hypochlorite in 100% Buffer Solution and its Application in Complex Water Samples

Hypochlorite (ClO-), a crucial chemical in the living organism, engages in various physiological activities. However, high amounts of ClO- result in oxidative damage. In this work, a commercially available 2-aminoanthracene (AA) was used to detect ClO-. AA demonstrated distinct properties such as superior selectivity and rapid response (< 30 s) with a low detection limit (140 nM) towards ClO- in 100% buffer solution. Furthermore, the probe exhibited a notable achievement by effectively identifying the presence of ClO- in complicated water samples. In conclusion, AA offers an easy-to-use and accurate method for quantifying ClO- in complex water samples.

In situ microwave-assisted preparation of NS-codoped carbon dots stabilized silver nanoparticles as an off-on fluorescent probe for trace Hg2+ detection

An off-on fluorescent probe (NS-CDs-AgNPs) was synthesized based on a one-pot microwave process by utilizing N, S co-doping carbon dots (NS-CDs) and silver nitrate as precursors. The significant peak of NS-CDs-AgNPs at 393 nm in ultraviolet spectrum indicated silver nanoparticle (AgNPs) were successfully synthesized. A faint blue fluorescence emission (442 nm) was displayed when excited NS-CDs-AgNPs at 371 nm. A remarkable fluorescence recovery was observed upon adding of trance Hg2+, whereas the other heavy metal ions did not elicit this response. The reason for this phenomenon was revealed in this work that a spontaneous redox reaction occurred between NS-CDs-AgNPs and Hg2+, which leaded to the formation of NS-CDs-Agn-2NPsHg complexes. On the basis of this mechanism, a new off-on fluorescent analytical method was constructed for Hg2+ detection with linear range of 10-400 nM (R2 = 0.9941), and the detection limit (LOD) of 5.16 nM. Additionally, satisfactory recovery (90.28%-106.13%) and the relative standard deviation (RSD) (RSD＜5.21%) were obtained in water sample detection. More importantly, the NS-CDs-AgNPs exhibited lower cytotoxicity and better biocompatibility, indicating a huge potential in cell imaging and clinical medicine.

Colorimetric sensing of Cu(II) ions in water on the basis of selective chemical etching of EDA-capped Ag nanoplates

Cu(II) ions are one of the essential mineral elements in the human body, but can pose a substantial health risk to people exposed to high concentrations of Cu(II) ions over a long period. Therefore, the ability to detect Cu(II) ions in drinking water is important. In this study, a novel colorimetric sensing probe for the easy and onsite detection of Cu(II) ions in drinking water was developed. The probe was constructed through selective chemical etching of triangular Ag nanoplates with tunable localized surface plasmon resonance (LSPR) properties. Ethylenediamine (EDA) was used as an organic capping agent to improve the chemical stability of triangular Ag nanoplates. Selective chemical etching of the EDA-capped Ag nanoplates in the presence of Cu(II) ions as a result of the formation of a coordination complex between the EDA and Cu(II) ions caused remarkable changes in the nanoplates' LSPR characteristics. On the basis of this phenomenon, a novel colorimetric sensing probe capable of detecting Cu(II) ions in drinking water at concentrations above the safety limit was developed. Our findings were also extended to develop a portable and paper-based sensing probe with good long-term stability to overcome the shortcomings of liquid-phase colorimetric sensors without requiring a spectrometer. The proposed colorimetric sensing probes provide accurate results even with a real sample and offer numerous advantages over conventional sensing platforms, including clearly distinguishable color changes that can be observed by the naked eye; thus, the proposed probes can be used for the selective, reliable, and low-cost point-of-care detection of Cu(II) ions in water.

Monitoring of Hypochlorite Level in Fruits, Vegetables, and Dairy Products: A BODIPY-Based Fluorescent Probe for the Rapid and Highly Selective Detection of Hypochlorite

Hypochlorite/hypochlorous acid (ClO^-/HOCl), among the diverse reactive oxygen species, plays a vital role in various biological processes. Besides, ClO^- is widely known as a sanitizer for fruits, vegetables, and fresh-cut produce, killing bacteria and pathogens. However, excessive level of ClO^- can lead to the oxidation of biomolecules such as DNA, RNA, and proteins, threatening vital organs. Therefore, reliable and effective methods are of utmost importance to monitor trace amounts of ClO^-. In this work, a novel BODIPY-based fluorescent probe bearing thiophene and a malononitrile moiety (BOD-CN) was designed and constructed to efficiently detect ClO^-, which exhibited distinct features such as excellent selectivity, sensitivity (LOD = 83.3 nM), and rapid response (<30 s). Importantly, the probe successfully detected ClO^- in various spiked water, milk, vegetable, and fruit samples. In all, BOD-CN offers a clearly promising approach to describe the quality of ClO^--added dairy products, water, fresh vegetables, and fruits.

Fluorescence attenuated by a thick scattering medium: Theory, simulations and experiments

Fluorescence-based imaging has an enormous impact on our understanding of biological systems. However, in vivo fluorescence imaging is greatly influenced by tissue scattering. A better understanding of this dependence can improve the potential of noninvasive in vivo fluorescence imaging. In this article, we present a diffusion model, based on an existing master-slave model, of isotropic point sources imbedded in a scattering slab, representing fluorophores within a tissue. The model was compared with Monte Carlo simulations and measurements of a fluorescent slide measured through tissue-like phantoms with different reduced scattering coefficients (0.5-2.5 mm^-1 ) and thicknesses (0.5-5 mm). Results show a good correlation between our suggested theory, simulations and experiments; while the fluorescence intensity decays as the slab's scattering and thickness increase, the decay rate decreases as the reduced scattering coefficient increases in a counterintuitive manner, suggesting fewer fluorescence artifacts from deep within the tissue in highly scattering media.

Preparation of temperature-responsive nanomicelles with AIE property as fluorescence probe for detection of Fe3+ and Fe2

Temperature-responsive nanomicelles with aggregation induced emission (AIE) property were prepared by the host-guest complexation of ferrocene functionalized tetraphenyl (TPE-Fc) and β-cyclodextrin-poly (N-isopropylacrylamide) (β-CD-(PNIPAM)₇). The AIE chromophore TPE-Fc bound to the hydrophobic cavity of cyclodextrin serves as the core of micelles, and temperature sensitive PNIPAM serves as the shell to give the micelles good solubility. The size of the nanomicelles is about 100 nm. At the excitation wavelength of 340 nm, the strongest fluorescent emission peak was 421 nm. The introduction of cyclodextrin star polymer increased the fluorescence intensity of nanomicelles, thus improving the recognition of probe to Fe³⁺ and Fe²⁺. The fluorescent probe can quickly detect Fe³⁺ and Fe²⁺ in water within 5 min even in the presence of various interfering ions. The detection limits of Fe³⁺ and Fe²⁺ were 1.04 μM and 0.78 μM, respectively in the range of 10-90 μM. The formation of complex between the probe and Fe³⁺/Fe²⁺ was supported by Job's plot. The probe was successfully applied to the detection of Fe³⁺and Fe²⁺ in actual water sample with a good recovery. In addition, a possible sensing mechanism for the interaction of iron ions with amide bond groups of nanomicelles was proposed.

AIEE Active Azomethine-Based Rhodamine Derivative For Ultrasensitive Multichannel Detection of Au3+ Through a Fluorimetrically, Electrochemically, and RGB-Based Sensing Assay

In this study, a novel rhodamine-based optically and electrochemically active chemosensor, integrated with a p-DMAC moiety, demonstrated extremely selective identification of Au³⁺ ions relative to other metal species, including (Li⁺, Na⁺, K⁺, Ba²⁺, Ca²⁺, Mg²⁺, Co²⁺, Mn²⁺, Zn²⁺, Pb²⁺, Ni²⁺, Fe²⁺, Hg²⁺, Fe³⁺, Cd²⁺, Pd²⁺, Al³⁺, Cr³⁺, Cu²⁺, and nitrate salt of Ag⁺). These compounds demonstrated a novel and outstanding aggregation-induced emission enhancement (AIEE) behavior by aggregating in DMF/H₂O medium. Furthermore, the degree of quenching was varying linearly with a Au³⁺ concentration from 0 to 40 nM, with a lower detection limit by RH-DMAC nanoaggregates of 118.79 picomolar (40.35 ppm). The Stern-Volmer plots, Job's plot, Benesi-Hildebrand plot, ¹H NMR titrations, ESI-mass, and FTIR all revealed significant interactions between the sensor and Au³⁺. Moreover, the proposed electrochemical sensor afforded a linear correlation before the peak current and concentration of Au³⁺ in the range of 0-40 nM, with a detection limit of 483.73 pM or 164.36 ppt (by cyclic voltammetry method) and 298.0 pM or 101.24 ppt (by the Differential Pulse Voltammetry method). Furthermore, the proposed sensing assay was used to measure Au³⁺ ion in spiked water samples (tap, drinking, waste, and river water), achieving acceptable accuracy and precision with high recovery rates. Furthermore, RH-DMAC-coated fluorescence paper test strips were designed for on-site Au³⁺ detection. Apart from this, the use of smartphone-based RGB (Red Green Blue) color analysis shortened the operating process, accelerated the detection technique, and provided a novel methodology for the instantaneous, real-time examination of Au³⁺ in real water samples.

Development in Fluorescent OFF-ON Probes Based on Cu2+ Promoted Hydrolysis Reaction of the Picolinate Moiety

Anions and cations have a key role in our normal life. Cu²⁺ ion is a crucial trace element accountable for the part of several cellular enzymes and proteins, including cytochrome c oxidase, dopamine monooxygenase, Cu/Zn superoxide dismutase, and ceruloplasmin. WHO has found the extreme acceptable level of Cu²⁺ ions in drinking water is up to 2.0 ppm. Excess use of Cu²⁺ ions is associated with various human genetic disorders. Thus, the visualization of Cu²⁺ ions to avoid its toxic effects in chemical and biological systems is significant. In this review we have summarized sensors based on catalytic hydrolysis of picolinate to detect Cu²⁺ ions. The sensors based on hydrolysis of picolinate are very selective as compared to the other sensors for Cu²⁺ ions detection. We have focused on describing the structure, spectral properties, detection limits, and bioimaging model of the sensors.

An Anthracene and Indole-based Fluorescent Probe for the Detection of Chromium(III) Ions in Real Water Samples

A novel fluorescent probe possessing anthracene with an indole unit was designed and synthesized to detect chromium(III) ions (Cr³⁺) with high sensitivity and selectivity. The probe was synthesized in one step by mixing two commercially available chemicals, 2-aminoanthracene and Indole-5-carboxaldehyde. The probe molecule (ANT-In) demonstrates distinct properties, for instance, "turn-on" fluorescence response, high sensitivity and selectivity in less than one minute, and low detection limit (0.2 µM) via hydrolysis of the C = N bond. Additionally, the probe ANT-In was successfully used to identify the presence of chromium(III) ions in real water samples.

A New Cationic Fluorescent Probe for HSO3- Based on Bisulfite Induced Aggregation Self-Assembly

In comparison with the numerous studies that have centered on developing molecular frameworks for the functionalization of fluorescent materials, less research has addressed the influence of the side chains, despite such appendages contributing significantly to the properties and applications of fluorescent materials. In this work, a new series of cationic fluorescent probes with AIE characteristics have been developed, which exhibit unique sensitivity for charge-diffusion anions, namely HSO₃⁻, via the interactions of ions and the cooperation of the controllable hydrophobicity. The impact of the alkyl chain length attached at the cationic probes suggested that the fluorescent intensity and sensitivity of the probes could be partially enhanced by adjusting their aggregation tendency through the action of the hydrophobic effect under aqueous conditions. DLS and SEM images indicated that different particle sizes and new morphologies of the probes were formed in the anion-recognition-triggered self-assembly process, which could be attributed to the composite effect of electrostatic actions, Van der Waals forces and π-π stacking.

Label-free detection of Cu(II) in fish using a graphene field-effect transistor gated by structure-switching aptamer probes

Copper sulfate is a widely used agent to control insects, bacteria and algae for fishery. However, excess amount of copper ions in water accumulate in aquatic products through the ecological cycle system, highly threatening food safety and public health. Therefore, it is urgent to develop a rapid and efficient method for the determination of copper content in aquatic products. In this study, we developed a label-free biosensor for Cu(II) based on a graphene field-effect transistor gated by structure-switching aptamer probes (SSA-GFET) against Cu(II) we obtained before. The detection mechanism of the biosensor is attributed to the surface charge shift and the potential change of the gate electrode upon the specific binding of Cu(II). The SSA-GFET biosensor has a low detection limit of 10 nM and a linear range of 10 nM to 3 μM to Cu(II). In addition to the excellent selectivity to Cu(II), the biosensor also showes the advantage of high recovery rate for detection of Cu(II) in real fish samples. Because of the detection characteristics of label-free SSA-GFET, it has great advantages in the field of food safety and environmental detection.

Fluorescent chemosensors containing redox-active ferrocene: a review

The redox-active ferrocene containing two cyclopentadienyl rings and iron was extensively employed in the field of sensing, catalysis, medicine, biotechnology etc., due to the structural stability, solubility in common solvents and easy structural modification to make a wide variety of ferrocene derivatives. The ferrocene moiety can be linked suitably with fluoro-chromogenic units and applied for the multichannel (fluorescent, chromogenic and redox) sensing of various bioactive and toxic analytes. This review was narrated to compile some important ferrocene based fluorescent chemosensors developed for the detection of metal ions, anions and neutral analytes. The analytical novelty and sensing mechanisms of the summarized chemosensors are discussed to open new scopes for future research.

Recent advances in colorimetry/fluorimetry-based dual-modal sensing technologies

Tailored to the increasing demands for sensing technologies, the fabrication of dual-modal sensing technologies through combining two signal transduction channels into one method has been proposed and drawn considerable attention. The integration of two sensing signals not only promotes the analytical efficiency with reduced assumption, but also improves the analytical performances with enlarged detection linear range, enhanced accuracy, and boosted application flexibility. The two top-rated output signals for developing dual-modal sensors are colorimetric and fluorescent signals because of their outstanding merits for point of care applications and real-time sensitive sensing. Given the rapid development of material chemistry and nanotechnology, the recent decade has witnessed great advance in colorimetric/fluorimetric signal based dual-modal sensing technologies. The new sensing strategy leads to a broad avenue for various applications in disease diagnosis, environmental monitoring and food safety because of the complementary and synergistic effects of the two output signals. In this state-of-the-art review, we comprehensively summarize different types of colorimetric/fluorimetric dual-modal sensing methods by highlighting representative research in the last 5 years, digging into their sensing methodologies, particularly the working principles of the signal transduction systems. Then, the challenges and future prospects for boosting further development of this research field are discussed.

Electronic structure and bridge geometric distortion in push–pull imine-bridged triads. A theoretical study

Intramolecular electron transfer (IET) in imine-bridged triads is studied by analyzing electric charge distribution and ferrocene and bridge distortion parameters.