Multifunctional ZnWO4 nanoparticles for photocatalytic removal of pollutants and disinfection of bacteria

Effects of ZnWO4 nanoparticles on growth, photosynthesis, and biochemical parameters of the green microalga Raphidocelis subcapitata

Nanoparticles have applications in many sectors in the society. ZnWO4 nanoparticles (ZnWO4-NPs) have potential in the fabrication of sensors, lasers, and batteries, and in environmental remediation. Thus, these NPs may reach aquatic ecosystems. However, we still do not know their effects on aquatic biota and, to our knowledge, this is the first study that evaluates the toxicity of ZnWO4-NPs in a eukaryotic organism. We evaluated the toxicity of ZnWO4-NPs on the green microalga Raphidocelis subcapitata for 96 h, in terms of growth, cell parameters, photosynthesis, and biochemical analysis. Results show that most of Zn was presented in its particulate form, with low amounts of Zn2+, resulting in toxicity at higher levels. The growth was affected from 8.4 mg L-1, with 96h-IC50 of 23.34 mg L-1. The chlorophyll a (Chl a) content increased at 30.2 mg L-1, while the fluorescence of Chl a (FL3-H) decreased at 15.2 mg L-1. We observed increased ROS levels at 44.4 mg L-1. Regarding photosynthesis, the NPs affected the oxygen evolving complex (OEC) and the efficiency of the photosystem II at 22.9 mg L-1. At 44.4 mg L-1 the qP decreased, indicating closure of reaction centers, probably affecting carbon assimilation, which explains the decay of carbohydrates. There was a decrease of qN (non-regulated energy dissipation, not used in photosynthesis), NPQ (regulated energy dissipation) and Y(NPQ) (regulated energy dissipation via heat), indicating damage to the photoprotection system; and an increase in Y(NO), which is the non-regulated energy dissipation via heat and fluorescence. The results showed that ZnWO4-NPs can affect the growth and physiological and biochemical parameters of the chlorophycean R. subcapitata. Microalgae are the base of aquatic food chains, the toxicity of emerging contaminants on microalgae can affect entire ecosystems. Therefore, our study can provide some help for better protection of aquatic ecosystems.

Asterarcys quadricellulare algae-mediated copper oxide nanoparticles as a robust and recyclable catalyst for the degradation of noxious dyes from wastewater

The present article explores the synthesis of copper oxide nanoparticles (CuO NPs) utilizing Asterarcys quadricellulare algal extract and examines the effect of various reaction parameters on the size and morphology of the nanoparticles. The samples were thoroughly characterized using XRD, FTIR, UV-vis, FE-SEM, and EDS techniques. The XRD analysis disclosed that the size of the synthesized nanoparticles could be controlled by adjusting the reaction parameters, ranging from 4.76 nm to 13.70 nm along the highest intensity plane (111). FTIR spectroscopy provided evidence that the phytochemicals are present in the algal extract. We have compared the photocatalytic activity of biologically and chemically synthesized CuO NPs and observed that biologically synthesized CuO NPs showed better photocatalytic activity than chemically synthesized CuO NPs. The biosynthesized CuO NPs (S8) demonstrated outstanding photodegradation activity towards four different organic dyes, namely BBY, BG, EBT, and MG, with degradation percentages of 95.78%, 98.02%, 94.15%, and 96.04%, respectively. The maximum degradation efficacy of 98.02% was observed for the BG dye at optimized reaction conditions and 60 min of visible light exposure. The kinetics of the photodegradation reaction followed the pseudo-first-order kinetic model, and the rate constant (k) was calculated using the Langmuir-Hinshelwood model for each dye. This study provides an efficient and sustainable approach for synthesizing CuO NPs with superior photocatalytic degradation efficiency towards organic dyes.

Combinatorial effects of non-thermal plasma oxidation processes and photocatalytic activity on the inactivation of bacteria and degradation of toxic compounds in wastewater

The simultaneous presence of hazardous chemicals and pathogenic microorganisms in wastewater is tremendously endangering the environment and human health. Therefore, developing a mitigation strategy for adequately degrading toxic compounds and inactivating/killing microorganisms is urgently needed to protect ecosystems. In this paper, the synergetic effects of the photocatalytic activity of TiO₂ and Cu–TiO₂ nanoparticles (NPs) and the oxidation processes of non-thermal atmospheric pressure plasma (NTAPP) were comprehensively investigated for both the inactivation/killing of common water contaminating bacteria (Escherichia coli (E. coli)) and the degradation of direct textile wastewater (DTW). The photocatalytic NPs were synthesized using the hydrothermal method and further characterized employing field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), ultraviolet-visible diffuse reflection spectroscopy (UV-Vis DRS) and photoluminescence (PL). Results revealed the predominant presence of the typical anatase phase for both the flower-like TiO₂ and the multipod-like Cu–TiO₂ structures. UV-Vis DRS and PL analyses showed that the addition of Cu dopants reduced the bandgap and increased oxygen defect vacancies of TiO₂. The inactivation of E. coli in suspension and degradation of DTW were then examined upon treating the aqueous media with various plasma alone and plasma/NPs conditions (Ar plasma, Ar + O₂ plasma and Ar + N₂ plasma, Ar plasma + TiO₂ NPs and Ar plasma + Cu–TiO₂ NPs). Primary and secondary excited species such as OH˙, O, H and N₂* generated in plasma during the processes were recognized by in situ optical emission spectrometry (OES) measurements. Several other spectroscopic analyses were further employed to quantify some reactive oxygen species (ROS) such as OH, H₂O₂ and O₃ generated during the processes. Moreover, the changes in the pH and electrical conductivity (EC) of the solutions were also assessed. The inactivation of bacteria was examined by the colony-forming unit (CFU) method after plating the treated suspensions on agar, and the degradation of organic compounds in DTW was further validated by measuring the total organic carbon (TOC) removal efficiency. All results collectively revealed that the combinatorial plasma-photocatalysis strategy involving Cu–TiO₂ NPs and argon plasma jet produced higher concentrations of ROS and proved to be a promising one-step wastewater treatment effectively killing microorganisms and degrading toxic organic compounds.

Contamination of water is a serious issue across the world. The proposed plasma synergetic treat has great potential to treat contaminated water in an environmentally friendly way.

Anchoring ZnIn2S4 nanosheets on ZSM-5 for boosting photocatalytic Cr(vi) reduction

ZSM-5@ZnIn2S4 is constructed for highly efficient photocatalytic Cr(vi) reduction.

Synthesis, Characterization and Enhanced Visible Light Photocatalytic Performance of ZnWO4-NPs@rGO Nanocomposites

ZnWO4 nanoparticles on reduced graphene oxide (ZnWO4-NPs@rGO) nanocomposites were synthesized using the hydrothermal method. Structural, morphological, optical, and photocatalytic studies of the ZnWO4-NPs@rGO nanocomposites were successfully investigated. Photo-catalytic performances of the ZnWO4-NPs@rGO nanocomposites were examined for the degradation of hazardous methylene blue dye (HMBD) in a neutral medium. ZnWO4-NPs@rGO nanocomposites show superior photo-catalytic performances over pure ZnWO4 nanoparticles. ZnWO4-NPs@rGO nanocomposites degrade ~98% dye while pure ZnWO4 nanoparticles degrade ~53% dye in 120 min. The prepared nanocomposites also show excellent recycled photo-catalytic efficiencies over multiple cycles.

High Near-Infrared Reflective Zn1-xAxWO4 Pigments with Various Hues Facilely Fabricated by Tuning Doped Transition Metal Ions (A = Co, Mn, and Fe)

A series of novel transition metal ion-substituted Zn_1-xA_xWO₄ (A = Co, Mn, and Fe, 0 < x ≤ 0.1) inorganic pigments with blue, yellow, brown, and pale green colors have been prepared by a solution combustion method and exhibit extremely high near-infrared reflectance (R > 85%). X-ray energy-dispersive spectroscopy analysis makes it clear that transition metal ions have already been incorporated into the host ZnWO₄ lattice and do not change the lattice's initial wolframite structure. The optical absorption spectrum in the UV region of the ZnWO₄ pigment calcined at 800 °C for 3 h is a ligand-to-metal charge transfer from O 2p nonbonding orbits to antibonding W 5d orbits. On account of the doping Co²⁺ (3d⁷), Mn²⁺ (3d⁵), and Fe³⁺ (3d⁵) transition metal ions, these chromophore ions have occupied the distorted octahedral site of Zn²⁺, leading to d-d transition and metal-to-metal charge transfer from the occupied 3d orbits of A²⁺ to unoccupied W 5d orbits in UV and visible ranges and generating some bright colors. Significantly, these inorganic pigments are also endowed with excellent thermal and chemical stability and are conducive to harsh working conditions. All of the analysis results have offered some design strategies for various colorful inorganic pigments with high near-infrared reflectance.