Efficient photocatalytic degradation of environmental pollutant with enhanced photocarrier separation in novel Z-scheme a-MnO2 nanorod/a-MoO3 nanocomposites

A Visible Light-Driven α-MnO2/UiO-66-NH2 S-Scheme Photocatalyst toward Ameliorated Oxy-TCH Degradation and H2 Evolution

Photocatalytic hydrogen production and pollutant degradation using a heterogeneous photocatalyst remains an alternative route for mitigating the impending pollution and energy crisis. Hence, the development of cost-effective and environmentally friendly semiconducting materials with high solar light captivation nature is imperative. To overcome this challenge, α-MnO2 nanorod (NR)-modified MOF UiO-66-NH2 (UNH) was prepared via a facile solvothermal method, which is efficient toward H2 evolution and oxy-tetracycline hydrochloride (O-TCH) degradation. The field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HR-TEM) results of the α-MnO2@UNH (MnU) hybrid reveals its nanorod embedded in MOF matrix, and the X-ray photoelectron spectroscopy (XPS) result confirms the interaction of UNH moiety with α-MnO2 NRs. Additionally, the outstanding separation of photogenerated excitons and the charge-transfer efficacy are further validated by photoluminescence (PL), time-resolved photoluminescence (TRPL), electrochemical impedance spectroscopy (EIS), and transient photocurrent analysis, which are the key causes for photoactivity augmentation in the MnU composites. The MnU-2 composite shows a superior O-TCH degradation efficiency of 93.23% and an excellent H2 production rate of about 410.6 μmol h-1 upon light irradiation. This study provides significant evidence in favor of the suggested mediator-free S-scheme-adapted charge migration path, and it effectively explains the enhanced exciton separation leading to extraordinary catalytic efficiency of the proposed composite.

Synergistic Trimetallic Nanocomposites as Visible-NIR-Sunlight-Driven Photocatalysts for Efficient Artificial Photosynthesis

Here, we report monodispersed tricomponent MnNSs-SnO2@Pt and MnNFs-SnO2@Pt nanocomposites prepared by simultaneous SnO2 and Pt nanodot coating on Mn nanospheres (MnNSs) and Mn nanoflowers (MnNFs) for highly efficient CO2 photoreduction in visible-NIR-sunlight irradiation. MnNFs-SnO2@Pt showed higher efficiency with a quantum yield of 3.21% and a chemical yield of 5.45% for CO2 conversion under visible light irradiation for HCOOH formation with 94% selectivity. Similarly, MnNFs-SnO2@Pt displayed significant photocatalytic efficiency in NIR and sunlight irradiation for HCOOH yield. MnNFs-SnO2@Pt nanocomposites also showed robust morphology and sustained structural stability with shelf-life for at least 1 year and were utilized for at least 10 reaction cycles without losing significant photocatalytic efficiency. The high surface area (94.98 m2/g), efficient electron-hole separation, and Pt-nanodot support in MnNFs--SnO2@Pt contributed to a higher photocatalytic efficacy toward CO2 reduction.

Fabrication of High Surface Area TiO2-MoO3 Nanocomposite as a Photocatalyst for Organic Pollutants Removal from Water Bodies

A nanocomposite (NC) of titanium (IV) oxide (TiO2) and molybdenum (VI) oxide (MoO3) was synthesized using a hydrothermal route. Detailed analyses using transmission electron microscopy, X-ray diffraction, X-ray fluorescence (XRF), Brunauer–Emmett–Teller (BET) isotherms, X-ray photoelectron spectroscopy, Raman, and diffuse reflectance infrared Fourier transform spectroscopy were carried out and confirmed the successful formation of pure TiO2-MoO3 (Ti-Mo) NC. The Ti-Mo NC possesses sizes in the range of 150–500 nm. XPS, Raman, and DRIFT shift measurements confirmed the formation of mixed oxide linkage in the form of Ti-O-Mo. Sorption of nitrogen isotherms revealed a significant increase in the number and pore widths of mesopores in the NC. Water sorption isotherms revealed enhanced affinity of the nanocomposites for water relative to the pure metal oxides. The BET surface area for Ti-Mo NC from the nitrogen adsorption isotherm was 129.3 m2/g which is much higher than the pure metal oxides (i.e., 37.56 m2/g for TiO2 and 2.21 m2/g for MoO3). The Ti-Mo NC provided suitable adsorption sites that captured the studied carbamates from the solution and promoted their photodegradation process. The photocatalytic degradation of MB in the presence of the catalyst was enhanced by 2.9 and 5.5 folds upon irradiation with white LED and 302 nm UV light sources, respectively.

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

Direct Z-Scheme AgBr/β-MnO2 Photocatalysts for Highly Efficient Photocatalytic and Anticancer Activity

The preparation of visible light-responsive efficient photocatalysts for removing organic contaminants from water and killing cancer cells has gotten a lot of attention due to the growing global concern. In this study, we have successfully fabricated an efficient AgBr/β-MnO₂ nanocomposite via a facile deposition and precipitation method at room temperature. Techniques such as XRD, SEM-EDS, TEM, DRS, PL, EIS, ESR, and FTIR were used to determine the crystalline, structural, morphological, optical, and other properties. The SEM and TEM analyses reveal that AgBr NPs are decorated on the surface of β-MnO₂, which possesses rods with a sphere-like structure for AgBr/β-MnO₂. The EDX analysis confirms the existence of Mn, O, Ag, and Br elements in the nanocomposites without an extra peak, indicating that the synthesized samples are highly pure. The high photocatalytic performance of AgBr/β-MnO₂ could be attributed to the formation of Ag NPs and the construction of the Z-scheme heterojunction between AgBr and β-MnO₂. This may enhance fast light absorption and efficient photogenerated (e-/h+) pairs, as indicated by EIS and photoluminescence measurements, which in turn achieved high activity for the decomposition of MB (97%, in 12 min), RhB (98.9%, in 9 min), and paracetamol (80%, in 180 min), respectively. The kinetic model study proposed that the first-order model showed a better fit than the zero- and second-order for the photocatalytic decolorization of RhB dye. XRD analysis of 0.2 AgBr/β-MnO₂ before and after recycling confirms the high stability of the catalyst. HPLC results showed that no detectable by-products are produced through the decomposition of paracetamol. Interestingly, 0.2 AgBr/β-MnO₂ nanocomposites showed visible light-induced anticancer activity against A549 cancer cell lines. The mechanistic degradation pathway has been proposed using the involvement of active species like superoxide radicals (^-•O₂) and photoinduced holes (h⁺). The proposed work focuses on synthesizing effective photocatalysts in a less hazardous environment with superior biological activity.

MOF-5 derived ZnO-C nanoparticles combined with α-MnO2 for efficient degradation of tetracycline under visible light

A multifunctional α-MnO2/ZnO-C (MZ) Z-scheme photocatalyst was synthesized by suit-growth of α-MnO2 on the surface of MOF-5 and pyrolysis of the organic components in a certain condition. The obtained photocatalysts...