A new and efficient pyridine-2,6-dicarboxamide-based fluorescent and colorimetric chemosensor for sensitive and selective recognition of Pb2+ and Cu2+

Quinoline-quinoline schiff-base as an effective chromogenic, fluorogenic, and smartphone assisted RGB detection of Pb2+ ion in near aqueous medium

A novel multimode colorimetric and fluorescent chemosensor was developed using an 8-hydroxy quinoline carbaldehyde Schiff base with a quinoline hydrazide probe (E)-2-((2-(quinolin-2-yl)hydrazineylidene)methyl)quinolin-8-ol (L). NMR (1H & 13C), FTIR, and HR-mass spectral characterization techniques confirmed the probe L structural conformation. As Probe L contacts Pb2+ ions, a color change and turn-off emission can be visually detected in EtOH:H2O (1:1, v/v, pH = 7.21) medium. The probe displays a good emission at 440 nm due to the combined ESIPT and ICT process. The Pb2+ ion interacts with the probe and selectively quenches fluorescence by inhibiting ESIPT and >CN- isomerization. As per Job's plot, L-Pb2+ complex formation occurred in a 1:1 stoichiometric ratio, with association constant (Ka) and quenching constant (Ksv) estimated at 1.52 × 105 M-1 and 4.12 × 105 M, respectively. The detection limits of Pb2+ by spectrophotometric and spectrofluorometric were 1.99 μM (41 ppb) and 23.4 nM (485 ppt), respectively. Additionally, the test paper kit and RGB tool were used to monitor the color changes of L with Pb2+ and the LOD was found to be 5.99 μM (125 ppb). Its recognition mechanism has been verified by 1H NMR, ESI-mass, and theoretical studies.

Heterocyclic fluorescent Schiff base chemosensors for the detection of Fe(III) and Cu(II) ions

Two new Schiff bases were synthesized from 1-(2,4-dihydroxyphenyl)ethanone and pyridine derivatives. Both compounds were characterized using infrared, UV-Vis., 1H NMR, 13C NMR and mass spectral studies. Density functional theory (DFT) calculations were performed for both the Schiff bases with 6-31G(d, p) as the basis set. Vibrational frequencies calculated using the theoretical method were in good agreement with the experimental values. Both the Schiff bases were highly fluorescent in nature. The cation-recognizing profile of the compounds was investigated in aqueous methanol medium. The Schiff base 4-(1-(pyridin-4-ylimino)ethyl)benzene-1,3-diol (PYEB) was found to interact with Fe(III) and Cu(II) ions, whereas the Schiff base 4,4'-((pyridine-2,3-diylbis(azanylylidene))bis(ethan-1-yl-1-ylidene))bis(benzene-1,3-diol) (PDEB) was found to detect Cu(II) ions. The mechanism of recognition was established as combined excited state intramolecular proton transfer (ESIPT)-chelation-enhanced fluorescence (CHEF) effect and chelation-enhanced quenching (CHEQ) process for the detection of Fe(III) and Cu(II) ions, respectively. The stability constant of the metal complexes formed during the sensing process was determined. The limit of detection for Fe(III) and Cu(II) ions with respect to Schiff base PYEB was found to be 1.64 × 10-6 and 2.16 × 10-7 M, respectively. With respect to Schiff base PDEB, the limit of detection for Cu(II) ion was found to be 4.54 × 10-4 M. The Cu(II) ion sensing property of the Schiff base PDEB was applied in bioimaging studies for the detection of HeLa cells.

Colorimetric Detection of Cu2+ and Ag+ Ions Using Multi-Responsive Schiff Base Chemosensor: A Versatile Approach for Environmental Monitoring

In this study, we have synthesized a novel Schiff base-centered chemosensor, designated as SB, with the chemical name ((E)-1-(((6-methylbenzo[d]thiazol-2-yl) imino)methyl)naphthalen-2-ol). This chemosensor was structurally characterized by FT-IR, 1H NMR, UV-Vis and fluorescence spectroscopy. After structural characterization the chemosensor SB was subsequently employed for the detection of Cu2+ and Ag+, using fluorescence spectroscopy. The chemosensor SB showed excellent ability to recognize the target metal ions, leading to fluorescence enhancement and color change from yellow to yellowish orange for Cu2+ and yellow to radish for Ag+ ions. The detection capabilities of this chemosensor were impressive, showing excellent selectivity and an exceptionally low detection limit of 0.0016 µM for Cu2+ and 0.00389 µM for Ag+. Most notably, our approach enables the quantitative detection both metal ions in different water and soil samples at trace level. This achievement holds great promise for analytical applications and offers significant contributions to the field of chemical sensing and environmental protection.

A new benzothiazole azo dye colorimetric chemosensor for detecting Pb2+ ion

In this work, a new benzothiazole azo dye sensor (BTS) was synthesized, and its cation binding affinity was studied using the colorimetric method, UV-vis, and ¹H NMR spectral data. The results revealed that the sensor BTS exhibits a remarkable tendency for Pb²⁺ ion to perform spontaneous visual color change from blue (BTS) to pink (BTS + Pb²⁺), without any color change in the aqueous solutions of other cations such as Hg²⁺, Cu²⁺, Al³⁺, Ni²⁺, Cd²⁺, Ag⁺_, Ba²⁺, K⁺, Co²⁺, Mg²⁺, Na⁺, Ca²⁺, Fe²⁺, and Fe³⁺ ions. The observed selectivity could be due to the formation of the complex (BTS + Pb²⁺⁾, which led to a blue shift from 586 nm (BTS) to 514 nm (BTS + Pb²⁺) in the UV spectrum. The job's plot provided the stoichiometry ratio of the complex (BTS + Pb²⁺) to be 1:1. The limit of detection (LOD) of BTS for Pb²⁺ ion sensing was obtained at 0.67 µM. Additionally, the binding constant for BTS toward Pb ²⁺ ion was studied using the Benesi-Hildebrand equation. As a result of the BTS test paper strips investigations, it was found that the synthesized sensor BTS could be used as a rapid colorimetric chemosensor for the detection of the Pb²⁺ ions in the distilled, tap, and sea waters.

Recent Progress on Fluorescent Probes in Heavy Metal Determinations for Food Safety: A Review

One of the main challenges faced in food safety is the accumulation of toxic heavy metals from environmental sources, which can sequentially endanger human health when they are consumed. It is invaluable to establish a practical assay for the determination of heavy metals for food safety. Among the current detection methods, technology based on fluorescent probes, with the advantages of sensitivity, convenience, accuracy, cost, and reliability, has recently shown pluralistic applications in the food industry, which is significant to ensure food safety. Hence, this review systematically presents the recent progress on novel fluorescent probes in determining heavy metals for food safety over the past five years, according to fluorophores and newly emerging sensing cores, which could contribute to broadening the prospects of fluorescent materials and establishing more practical assays for heavy metal determinations.

A Review on Recent Progress in Organic Fluorimetric and Colorimetric Chemosensors for the Detection of Cr3+/6+Ions

Chromium occurs in the environment primarily in two valence states, trivalent Cr3+ and hexavalent Cr6+, which have different physicochemical and biochemical properties. However, the higher concentration of Cr3+/6+ can cause various adverse effects on human health. Therefore, detecting Cr3+/6+ ions is important in various samples. Colorimetric and fluorescent chemosensors are the most powerful tools for the detection of Cr3+/6+ ions. These chemosensors have excellent bioimaging capability and significant sensitivity and selectivity. In this article, different colorimetric and fluorescent chemosensors based on organic compounds, including Schiff base, antipyrine, diarylethene, pyrene, crown ether, dansyl, pyridine, thiazole, coumarin, boradiazaindacene, rhodamine, imidazole, hydrazone, and other functional groups for detection of Cr3+/6+ ions have been reviewed, classified them according to different fluorophore and recognition mode. I hope this article will help the readers for the future design of highly effective, sensitive, and selective chemosensors for the detection and determination of Cr3+/6+ ions.

Synthesis and Structural Characterization of Pyridine-2,6-dicarboxamide and Furan-2,5-dicarboxamide Derivatives

Derivatives based on pyridine-2-6- and furan-2,5-dicarboxamide scaffolds reveal numerous chemical properties and biological activities. This fact makes them an exciting research topic in supramolecular and coordination chemistry and in discovering new pharmacologically-active compounds. This work aimed to obtain a series of symmetrical pyridine-2-6- and furan-2,5-dicarboxamides through a condensation reaction of the appropriate acyl chlorides and aromatic amides. Successful syntheses were confirmed with NMR spectroscopy. We solved their crystal structures for seven compounds; two pyridine and five furan derivatives. Based on our crystallographic studies, we were able to indicate supramolecular features of the crystals under investigation. Additionally, Hirshfeld surface analysis allowed us to calculate a distribution of intermolecular contacts in the dicarboxamide crystals.

a Versatile Schiff Base Chemosensor for the Determination of Trace Co2+, Ni2+, Cu2+, and Zn2+ in the Water and Its Bioimaging Applications

In this work, a simple and versatile Schiff base chemosensor (L) was developed for the detection of four adjacent row 4 metal ions (Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) through colorimetric or fluorescent analyses. L could recognize the target ions in solutions containing a wide range of other cations and anions. The recognition mechanisms were verified with a Job's plot, HR-MS assays, and ¹H NMR titration experiments. Then, L was employed to develop colorimetric test strips and TLC plates for Co²⁺. Meanwhile, L was capable of quantitatively measuring the amount of target ions in tap water and river water samples. Notably, L was used for imaging Zn²⁺ in HepG2 cells, zebrafish, and tumor-bearing mice, which demonstrated its potential biological applications. Therefore, L can probably serve as a versatile tool for the detection of the target metal ions in environmental and biological applications.