Functionalization of textile materials with TiO2 nanoparticles

Fabrication of multifunctional wool textile using the synthesis of silver-modified N-doped ZnO/TiO2 photocatalysts

Photocatalysts and noble metals have attracted considerable attention for their potential in addressing global environmental pollution through photochemical processes. At low temperatures, multifunctional self-cleanable wool fabric was developed through green photo-sonosynthesis of N-Ag/TiO2/ZnO. A narrower bandgap of the hybrid photocatalyst, the surface plasmonic resonance effect of silver nanostructures, and nitrogen doping resulted in synergistically enhanced self-cleaning activity. The self-cleaning activity was evaluated by monitoring the discoloration of methylene blue stains on the wool fabric exposed to natural sunlight, using CIELAB color space and ΔE measurements. The ΔE value of the N-Ag/TiO2/ZnO-sonicated wool was superior, showing a value of 45.9 compared to 15.7 for the control and 28.7 for the sample coated by the stirrer. Furthermore, the nanocomposite construction improved tensile strength, enhanced fabric hydrophilicity, and reduced the yellowness index. Additionally, the synthesis of TiO2 and silver particles on ZnO particles increased surface resistance to acid, reducing ZnO acid solubility. The reflectance of the non-treated wool ranged from 5 to 20 % within 200-380 nm, while the reflectance of the Ag/TiO2/ZnO-sonicated sample remained constant at 4 %, exhibiting protection against UV rays. AATCC test revealed 100 % bacteria reduction against E. coli and S. aureus and 99 % against C. albicans fungus for N-Ag/TiO2/ZnO-sonicated sample. Moreover, cell culture assays demonstrated a viability of over 70 %, indicating non-cytotoxicity.

Self-Cleaning Highly Porous TiO2 Coating Designed by Swelling-Assisted Sequential Infiltration Synthesis (SIS) of a Block Copolymer Template

Photocatalytic self-cleaning coatings with a high surface area are important for a wide range of applications, including optical coatings, solar panels, mirrors, etc. Here, we designed a highly porous TiO2 coating with photoinduced self-cleaning characteristics and very high hydrophilicity. This was achieved using the swelling-assisted sequential infiltration synthesis (SIS) of a block copolymer (BCP) template, which was followed by polymer removal via oxidative thermal annealing. The quartz crystal microbalance (QCM) was employed to optimize the infiltration process by estimating the mass of material infiltrated into the polymer template as a function of the number of SIS cycles. This adopted swelling-assisted SIS approach resulted in a smooth uniform TiO2 film with an interconnected network of pores. The synthesized film exhibited good crystallinity in the anatase phase. The resulting nanoporous TiO2 coatings were tested for their functional characteristics. Exposure to UV irradiation for 1 h induced an improvement in the hydrophilicity of coatings with wetting angle reducing to unmeasurable values upon contact with water droplets. Furthermore, their self-cleaning characteristics were tested by measuring the photocatalytic degradation of methylene blue (MB). The synthesized porous TiO2 nanostructures displayed promising photocatalytic activity, demonstrating the degradation of approximately 92% of MB after 180 min under ultraviolet (UV) light irradiation. Thus, the level of performance was comparable to the photoactivity of commercial anatase TiO2 nanoparticles of the same quantity. Our results highlight a new robust approach for designing hydrophilic self-cleaning coatings with controlled porosity and composition.

Synthesis and characterization of titanium dioxide nanoparticles from Bacillus subtilis MTCC 8322 and its application for the removal of methylene blue and orange G dyes under UV light and visible light

Over the last decade there has been a huge increase in the green synthesis of nanoparticles. Moreover, there is a continuous increase in harnessing the potential of microorganisms for the development of efficient and biocompatible nanoparticles around the globe. In the present research work, investigators have synthesized TiO2 NPs by harnessing the potential of Bacillus subtilis MTCC 8322 (Gram-positive) bacteria. The formation and confirmation of the TiO2 NPs synthesized by bacteria were carried out by using UV-Vis spectroscopy, Fourier transforms infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (EDX/EDS). The size of the synthesized TiO2 NPs was 80-120 nm which was spherical to irregular in shape as revealed by SEM. FTIR showed the characteristic bands of Ti-O in the range of 400-550 cm-1 and 924 cm-1 while the band at 2930 cm-1 confirmed the association of bacterial biomolecules with the synthesized TiO2 NPs. XRD showed two major peaks; 27.5° (rutile phase) and 45.6° (anatase phase) for the synthesized TiO2 NPs. Finally, the potential of the synthesized TiO2 NPs was assessed as an antibacterial agent and photocatalyst. The remediation of Methylene blue (MB) and Orange G (OG) dyes was carried out under UV- light and visible light for a contact time of 150-240 min respectively. The removal efficiency for 100 ppm MB dye was 25.75% and for OG dye was 72.24% under UV light, while in visible light, the maximum removal percentage for MB and OG dye was 98.85% and 80.43% respectively at 90 min. Moreover, a kinetic study and adsorption isotherm study were carried out for the removal of both dyes, where the pseudo-first-order for MB dye is 263.269 and 475554.176 mg/g for OG dye. The pseudo-second-order kinetics for MB and OG dye were 188.679 and 1666.667 mg/g respectively. In addition to this, the antibacterial activity of TiO2 NPs was assessed against Bacillus subtilis MTCC 8322 (Gram-positive) and Escherichia coli MTCC 8933 (Gram-negative) where the maximum zone of inhibition in Bacillus subtilis MTCC 8322 was about 12 mm, and for E. coli 16 mm.

Photocatalytic Antimicrobials: Principles, Design Strategies, and Applications

Nowadays, the increasing emergence of antibiotic-resistant pathogenic microorganisms requires the search for alternative methods that do not cause drug resistance. Phototherapy strategies (PTs) based on the photoresponsive materials have become a new trend in the inactivation of pathogenic microorganisms due to their spatiotemporal controllability and negligible side effects. Among those phototherapy strategies, photocatalytic antimicrobial therapy (PCAT) has emerged as an effective and promising antimicrobial strategy in recent years. In the process of photocatalytic treatment, photocatalytic materials are excited by different wavelengths of lights to produce reactive oxygen species (ROS) or other toxic species for the killing of various pathogenic microbes, such as bacteria, viruses, fungi, parasites, and algae. Therefore, this review timely summarizes the latest progress in the PCAT field, with emphasis on the development of various photocatalytic antimicrobials (PCAMs), the underlying antimicrobial mechanisms, the design strategies, and the multiple practical antimicrobial applications in local infections therapy, personal protective equipment, water purification, antimicrobial coatings, wound dressings, food safety, antibacterial textiles, and air purification. Meanwhile, we also present the challenges and perspectives of widespread practical implementation of PCAT as antimicrobial therapeutics. We hope that as a result of this review, PCAT will flourish and become an effective weapon against pathogenic microorganisms and antibiotic resistance.

Modification of Cotton and Leather Surfaces Using Cold Atmospheric Pressure Plasma and TiO2-SiO2-Reduced Graphene Oxide Nanopowders

Surface modification of textile fabrics and leathers is very versatile and allows the products quality improvement. In this work, cotton and leather substrates were pre-treated with cold atmospheric pressure plasma (CAPP) and further coated with TiO₂-SiO₂-reduced graphene oxide composites in dispersion form. By using a Taguchi scheme, this research evaluated the effect of three significant parameters, i.e., the pre-treatment with CAPP, organic dispersion coating and TiO₂-SiO₂-reduced graphene oxide (TS/GR) composites, that may affect the morpho-structural properties and photocatalytic activity of modified cotton and leather surfaces. The characteristics of cotton/leather surfaces were evaluated by morphological, structural, optical and self-cleaning ability using scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX), X-ray powder diffraction (XRD), attenuated total reflection-Fourier Transform Infrared spectroscopy (ATR-FTIR) and UV-Vis spectroscopy. The self-cleaning performance of the obtained cotton and leather samples was evaluated by photocatalytic discoloration of berry juice surface stains under UV light irradiation for 12 h. The successfulness of coating formulations was proven by the SEM analysis and UV-Vis spectroscopy. The XRD patterns and ATR-FTIR spectra revealed the cellulose and collagen structures as dominant components of cotton and leather substrates. The CAPP treatment did not damage the cotton and leather structures. The photocatalytic results highlighted the potential of TiO₂-SiO₂-reduced graphene oxide composites in organic dispersion media, as coating formulations, for further use in the fabrication of innovative self-cleaning photocatalytic cotton and leather products.

In-Situ Functionalization of Cotton Fabric by TiO2: The Influence of Application Routes

The desirable chemical, physical, electronic, and optical properties of TiO2, as well as its high availability, non-toxicity, and low price, make it very popular in the modern functional textile industry. Here, TiO2 from titanium tetraisopropoxide (TTIP) precursors at concentrations of 2, 4, and 6% and commercial TiO2 nanoparticles (NPs) in dispersion form were applied to cotton textiles using low-temperature application methods (i.e., sol–gel pad–dry–cure, pad–hydrothermal, and exhaustion–hydrothermal methods) to provide a systematic study of the influence of low-temperature application processes and TIIP concentration and on the overall properties of TiO2-functionalized textile materials. The treated cotton fabric samples were characterized using scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDS), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction spectroscopy (XRD) to determine their surface morphology, chemical composition, and crystal structure, while the optical properties of the synthesized TiO2 were determined using the absorption method and Tauc plotting. Afterwards, corresponding UV protection properties and photocatalytic self-cleaning activity were evaluated. In contrast to commercial TiO2, a relatively thin TiO2 deposition with an amorphous structure and a blue-shifted band gap between 3.18 and 3.28 eV was formed when applied at low temperatures. A sol with a TIIP concentrations of 2 and 4% applied using the exhaustion–hydrothermal and sol–gel dry-cure method, respectively, proved to be optimal. Both applied sol concentrations provided good UV protection and excellent photocatalytic performance, which exceeded that of commercial TiO2, even though the Ti contents in the samples were two- to three-times lower and the synthesized TiO2 exhibited an amorphous structure.

Using nano technology for imparting PET/C blended fabric new functional performance properties

This article, discuss the effect of finishing polyester/cotton blended fabric (PET/C) with alkali and Titanium dioxide nanoparticles (TiO2 NPs) simultaneously. The treatment conditions such as NaOH and TiO2 NPs concentrations, reaction temperature and duration will be investigated. The effect of addition NPs on alkaline treatment conditions will prove through weight loss and carboxylic content. The ability of PET/C fabrics for loading with NPs during alkaline treatment was investigated by using SEM, EDX, and FTIR measurements. The effect of finishing of PET/C blended fabric with the suggested method on antimicrobial activity and ultraviolet protection was investigated. The simultaneous finishing of PET/C blended fabrics with alkali and TiO2 NPs showed excellent ultraviolet protection and high antimicrobial activity against Gram-positive ( Bacillus mycoides), Gram-negative ( Escherichia coli), and nonfilamentous fungus ( Candida albicans). The functional performance imparted to PET/C fabrics by the suggested approach are durable in repeated laundering processes, even after five Launder-Ometer washes.

Titanium dioxide and fluoropolymer-based coating for smart fabrics with antimicrobial and water-repellent properties

In the coronavirus disease 2019 pandemic, protective clothing is required for medical staff at risk of infection. This study proposes functional smart fabrics with antimicrobial and water-repellent properties, using titanium dioxide (TiO₂) and fluoropolymer-based precursors as coating materials. Experimental results indicated a uniform distribution of TiO₂ particles with an average size below 200 nm throughout the fabric. A zone of inhibition test revealed that the fabric inhibited bacterial growth, specifically of Staphylococcus aureus and Klebsiella pneumoniae, before and after 10 wash cycles of the fabric. In wetting angle measurements, the contact angles of water droplets on the fabric ranged from 120° to 139°. A water repellency test confirmed that the coated fabrics retained their water-repellent property after 10 wash cycles.

The fabrics coated with TiO₂ photocatalyst and fluoropolymer exhibit good water-repellent and antimicrobial properties. The coated fabrics can be used in the fabrication of smart gowns and scrub suits as protective clothing for medical staff.

Long-Lasting Photocatalytic and Antimicrobial Activity of Cotton Towels Modified with TiO2 and ZnO Nanoparticles

This study aimed to evaluate the durability of the photocatalytic and antimicrobial activities of ZnO and TiO2 nanoparticles (NPs)-modified 100% cotton terry textiles. SEM-EDX confirmed the long-lasting durability of the washing materials, and TGA analysis revealed that ZnO and TiO2 NPs can be found on the terry fabric surface; however, the amount of NPs decreased 10 times after 15 washes and 1.6 times after the subsequent 15 washes. The efficiency of self-cleaning properties and antimicrobial activity against five microorganisms (Staphylococcus aureus ATCC 6538, Escherichia coli ATCC 10536, Candida albicans ATCC 10231, Aspergillus niger ATCC 16404, and Bacillus subtilis NCAIM 01644) depended on UVA/B radiation intensity. The increase in UVA/B radiation intensity from 400 to 1400 µW/cm2 significantly increases the effectiveness of photocatalysis. Long-lasting self-cleaning properties characterised the tested fabric; however, stronger photocatalytic efficiency was observed in light with a greater intensity of UVA/B radiation. At the UVA/B radiation intensity of 1400 µW/cm2, a biocidal effect (R = 100%) against all tested microorganisms (E. coli, S. aureus. B. subtilis, C. albicans, and A. niger) was observed on the surface of materials. The lower UVA/B radiation intensity (400 µW/cm2) and 30 wash cycles reduce the antimicrobial activity of the material (R = 65.4–99.4%) for B. subtilis, C. albicans, and A. niger. The antimicrobial activity of washed materials modified with TiO2/ZnO nanoparticles can be increased by irradiation with a light bulb (1400 µW/cm2).

Graphitic Carbon Nitride as a New Sustainable Photocatalyst for Textile Functionalization

As a promising organic semiconducting material, polymeric graphitic carbon nitride (g-C₃N₄) has attracted much attention due to its excellent optical and photoelectrochemical properties, thermal stability, chemical inertness, nontoxicity, abundance, and low cost. Its advantageous visible light-induced photocatalytic activity has already been beneficially used in the fields of environmental remediation, biological applications, healthcare, energy conversion and storage, and fuel production. Despite the recognized potential of g-C₃N₄, there is still a knowledge gap in the application of g-C₃N₄ in the field of textiles, with no published reviews on the g-C₃N₄-functionalization of textile materials. Therefore, this review article aims to provide a critical overview of recent advances in the surface and bulk modification of textile fibres by g-C₃N₄ and its composites to tailor photocatalytic self-cleaning, antibacterial, and flame retardant properties as well as to create a textile catalytic platform for water disinfection, the removal of various organic pollutants from water, and selective organic transformations. This paper highlights the possibilities of producing g-C₃N₄-functionalized textile substrates and suggests some future prospects for this research area.

One Step In-Situ Synthesis of Zinc Oxide Nanoparticles for Multifunctional Cotton Fabrics

Zinc oxide nanoparticles (ZnO NPs) have acquired great significance in the textile sector due to their impressive efficiency and multifold utilization, such as antimicrobials, UV protection, photo catalytic activity, and self-cleaning. The aim of this work is in-situ growth of ZnO NPs on 100% cotton fabrics with the one-step hydrothermal method for preparation of multifunctional textile with UV protecting, antibacterial, and photo catalytic properties. Sodium hydroxide (NaOH) and Zinc nitrate hexahydrate [Zn(NO₃)₂·6H₂O] were used as reactants for the growth of zinc oxide on the 100% cotton fabrics. The loaded amount of Zn contents on the cotton fabric was determined by using induced coupled plasma atomic emission spectroscopy (ICP-AES). The surface morphological characterization of deposited ZnO NPs was examined, employing scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and, Fourier- transform infrared spectroscopy (FTIR). The characterization results showed the presence of ZnO NPs on cotton fabrics having hexagonal wurtzite crystalline structure. The synthesized ZnO NPs on fabrics exhibited promising results for antibacterial, UV protection, and photo catalytic performance.

Coating Cellulosic Material with Ag Nanowires to Fabricate Wearable IR-Reflective Device for Personal Thermal Management: The Role of Coating Method and Loading Level

Textiles coated with silver nanowires (AgNWs) are effective at suppressing radiative heat loss without sacrificing breathability. Many reports present the applicability of AgNWs as IR-reflective wearable textiles, where such studies partially evaluate the parameters for practical usage for large-scale production. In this study, the effect of the two industrial coating methods and the loading value of AgNWs on the performance of AgNWs-coated fabric (AgNWs-CF) is reported. The AgNWs were synthesized by the polyol process and applied onto the surface of cotton fabric using either dip- or spray-coating methods with variable loading levels of AgNWs. X-ray diffraction, scanning electron microscopy (SEM), infrared (IR) reflectance, water vapor permeability (WVP), and electrical resistance properties were characterized. The results report the successful synthesis of AgNWs with a 30 μm length. The results also show that the spray coating method has a better performance for reflecting the IR radiation to the body, which increases with a greater loading level of the AgNWs. The antibacterial results show a good inhibition zone for cotton fabric coated by both methods, where the spray-coated fabric has a better performance overall. The results also show the coated fabric with AgNWs maintains the level of fabric breathability similar to control samples. AgNWs-CFs have potential utility for cold weather protective clothing in which heat dissipation is attenuated, along with applications such as wound dressing materials that provide antibacterial protection.

Fabrication and characterization of TiO2 and MWCNT coated electrospinning nanofibers for UV protection properties

This paper aimed to fabricate UV protective nanofibers by the use of specific nanoparticles. The DMF/TiO2 (Titanium dioxide), DMF/MWCNT (Multi-Walled Carbon Nano Tubes), and DMF/MWCNT+TiO2 (MWCNT: TiO2 mass ratio= 1:1) solutions were transferred into a syringe with a stainless steel needle with gauge 21. The electrospinning process was performed for 3 h at the optimized conditions. The surface morphology of nanofibers was characterized by field emission scanning electron microscopy (FESEM). Fourier transform infrared spectroscopy (FTIR) was utilized to characterize functional groups of oxidized MWCNTs and investigate the successful load of nanoparticles at the fiber surface. The UV protection property of nanofibers was investigated by measuring UV rays' transmittance through the composite web. The data of Spectroscopy was used to compute the UV protection factor (UPF). (1) The effect of CNT,TiO2, and CNT+TiO2 nanoparticles on ultraviolet protection property was analyzed separately and simultaneously. (2) The different concentrations of nanoparticles, including 1,5,10, & 15 wt%, were used to fabricate UV protective nanocomposites. (3) The electrospinning condition was optimized as a 15 cm distance between the needle tip and collector, 20 KV voltage, 250 RPM drum rotation, and 1.2 ml/h feeding rate to access the best nanofibers.

Human Health and Ocean Pollution

Background

Pollution - unwanted waste released to air, water, and land by human activity - is the largest environmental cause of disease in the world today. It is responsible for an estimated nine million premature deaths per year, enormous economic losses, erosion of human capital, and degradation of ecosystems. Ocean pollution is an important, but insufficiently recognized and inadequately controlled component of global pollution. It poses serious threats to human health and well-being. The nature and magnitude of these impacts are only beginning to be understood.

Goals

(1) Broadly examine the known and potential impacts of ocean pollution on human health. (2) Inform policy makers, government leaders, international organizations, civil society, and the global public of these threats. (3) Propose priorities for interventions to control and prevent pollution of the seas and safeguard human health.

Methods

Topic-focused reviews that examine the effects of ocean pollution on human health, identify gaps in knowledge, project future trends, and offer evidence-based guidance for effective intervention.

Environmental Findings

Pollution of the oceans is widespread, worsening, and in most countries poorly controlled. It is a complex mixture of toxic metals, plastics, manufactured chemicals, petroleum, urban and industrial wastes, pesticides, fertilizers, pharmaceutical chemicals, agricultural runoff, and sewage. More than 80% arises from land-based sources. It reaches the oceans through rivers, runoff, atmospheric deposition and direct discharges. It is often heaviest near the coasts and most highly concentrated along the coasts of low- and middle-income countries. Plastic is a rapidly increasing and highly visible component of ocean pollution, and an estimated 10 million metric tons of plastic waste enter the seas each year. Mercury is the metal pollutant of greatest concern in the oceans; it is released from two main sources - coal combustion and small-scale gold mining. Global spread of industrialized agriculture with increasing use of chemical fertilizer leads to extension of Harmful Algal Blooms (HABs) to previously unaffected regions. Chemical pollutants are ubiquitous and contaminate seas and marine organisms from the high Arctic to the abyssal depths.

Ecosystem Findings

Ocean pollution has multiple negative impacts on marine ecosystems, and these impacts are exacerbated by global climate change. Petroleum-based pollutants reduce photosynthesis in marine microorganisms that generate oxygen. Increasing absorption of carbon dioxide into the seas causes ocean acidification, which destroys coral reefs, impairs shellfish development, dissolves calcium-containing microorganisms at the base of the marine food web, and increases the toxicity of some pollutants. Plastic pollution threatens marine mammals, fish, and seabirds and accumulates in large mid-ocean gyres. It breaks down into microplastic and nanoplastic particles containing multiple manufactured chemicals that can enter the tissues of marine organisms, including species consumed by humans. Industrial releases, runoff, and sewage increase frequency and severity of HABs, bacterial pollution, and anti-microbial resistance. Pollution and sea surface warming are triggering poleward migration of dangerous pathogens such as the Vibrio species. Industrial discharges, pharmaceutical wastes, pesticides, and sewage contribute to global declines in fish stocks.

Human Health Findings

Methylmercury and PCBs are the ocean pollutants whose human health effects are best understood. Exposures of infants in utero to these pollutants through maternal consumption of contaminated seafood can damage developing brains, reduce IQ and increase children's risks for autism, ADHD and learning disorders. Adult exposures to methylmercury increase risks for cardiovascular disease and dementia. Manufactured chemicals - phthalates, bisphenol A, flame retardants, and perfluorinated chemicals, many of them released into the seas from plastic waste - can disrupt endocrine signaling, reduce male fertility, damage the nervous system, and increase risk of cancer. HABs produce potent toxins that accumulate in fish and shellfish. When ingested, these toxins can cause severe neurological impairment and rapid death. HAB toxins can also become airborne and cause respiratory disease. Pathogenic marine bacteria cause gastrointestinal diseases and deep wound infections. With climate change and increasing pollution, risk is high that Vibrio infections, including cholera, will increase in frequency and extend to new areas. All of the health impacts of ocean pollution fall disproportionately on vulnerable populations in the Global South - environmental injustice on a planetary scale.

Conclusions

Ocean pollution is a global problem. It arises from multiple sources and crosses national boundaries. It is the consequence of reckless, shortsighted, and unsustainable exploitation of the earth's resources. It endangers marine ecosystems. It impedes the production of atmospheric oxygen. Its threats to human health are great and growing, but still incompletely understood. Its economic costs are only beginning to be counted.Ocean pollution can be prevented. Like all forms of pollution, ocean pollution can be controlled by deploying data-driven strategies based on law, policy, technology, and enforcement that target priority pollution sources. Many countries have used these tools to control air and water pollution and are now applying them to ocean pollution. Successes achieved to date demonstrate that broader control is feasible. Heavily polluted harbors have been cleaned, estuaries rejuvenated, and coral reefs restored.Prevention of ocean pollution creates many benefits. It boosts economies, increases tourism, helps restore fisheries, and improves human health and well-being. It advances the Sustainable Development Goals (SDG). These benefits will last for centuries.

Recommendations

World leaders who recognize the gravity of ocean pollution, acknowledge its growing dangers, engage civil society and the global public, and take bold, evidence-based action to stop pollution at source will be critical to preventing ocean pollution and safeguarding human health.Prevention of pollution from land-based sources is key. Eliminating coal combustion and banning all uses of mercury will reduce mercury pollution. Bans on single-use plastic and better management of plastic waste reduce plastic pollution. Bans on persistent organic pollutants (POPs) have reduced pollution by PCBs and DDT. Control of industrial discharges, treatment of sewage, and reduced applications of fertilizers have mitigated coastal pollution and are reducing frequency of HABs. National, regional and international marine pollution control programs that are adequately funded and backed by strong enforcement have been shown to be effective. Robust monitoring is essential to track progress.Further interventions that hold great promise include wide-scale transition to renewable fuels; transition to a circular economy that creates little waste and focuses on equity rather than on endless growth; embracing the principles of green chemistry; and building scientific capacity in all countries.Designation of Marine Protected Areas (MPAs) will safeguard critical ecosystems, protect vulnerable fish stocks, and enhance human health and well-being. Creation of MPAs is an important manifestation of national and international commitment to protecting the health of the seas.

Sustainable Use of Nanomaterials in Textiles and Their Environmental Impact

At present, nanotechnology is a priority in research in several nations due to its massive capability and financial impact. However, due to the uncertainties and abnormalities in shape, size, and chemical compositions, the existence of certain nanomaterials may lead to dangerous effects on the human health and environment. The present review includes the different advanced applications of nanomaterials in textiles industries, as well as their associated environmental and health risks. The four main textile industry fields using nanomaterials, nanofinishing, nanocoatings, nanofibers, and nanocomposites, are analyzed. Different functional textiles with nanomaterials are also briefly reviewed. Most textile materials are in direct and prolonged contact with our skin. Hence, the influence of carcinogenic and toxic substances that are available in textiles must be comprehensively examined. Proper recognition of the conceivable benefits and accidental hazards of nanomaterials to our surroundings is significant for pursuing its development in the forthcoming years. The conclusions of the current paper are anticipated to increase awareness on the possible influence of nanomaterial-containing textile wastes and the significance of better regulations in regards to the ultimate disposal of these wastes.

Cotton Terry Textiles with Photo- and Bio-Activity in a Model Study and Real Conditions

The aim of the study was to assess the photocatalytic (decompose staining particles, K/S values, the color differences, CIE L*a*b* color) and antimicrobial properties of textiles modified with TiO₂ and ZnO nanoparticles (NPs) confirmed by X-ray diffraction, dynamic light scattering, SEM-EDX) in visible light conditions. The antimicrobial effectiveness of modified textiles under model conditions has been reported against 5 microorganisms: Staphylococcus aureus, Escherichia coli, Bacillus subtilis, Candida albicans, Aspergillus niger (AATCC Test Method 100-2004). In real conditions in bathrooms, significant biostatic activity was shown on the surface of the modified towels. The number of microorganisms decreased by 1-5 log to the level of 0-5 CFU/cm² in the case of bacteria: Enterobacteriaceae, Enterococcus, the coli group and E. coli, Pseudomonas. Statistically significant reduction of the total number of bacteria and fungi (by 1 log), and the concentration of gases (NO₂, CO₂, CO) in the air of bathrooms was determined. The removal or reduction of volatile organic compounds (VOCs) concentration (SPME-GC-MS analysis) in the air above the modified towels has also been determined. It was found that the lighting type (natural, artificial), time (1.5 and 7 h/day), air humidity (RH = 36-67%) and light intensity (81-167 lux) are important for the efficiency of photocatalysis. Textile materials modified with TiO₂ and ZnO NPs can be used as self-cleaning towels. They can also help purify air from microorganisms, VOCs and undesirable gases.

Use of Cotton Textiles Coated by Ir(III) Tetrazole Complexes within Ceramic Silica Nanophases for Photo-Induced Self-Marker and Antibacterial Application

This study was aimed at the production and characterization of coated cotton textiles with luminescent ceramic nanophases doped with cationic Ir(III) tetrazole complexes. We confirmed that SiO₂ nanoparticles (NPs) do not affect the phosphorescent properties of the complexes that maintain their emission (610 and 490 nm). For the first time we transferred the luminescence feature from nanosol to textile surface, highlighting the advantages of using nanosilica as an encapsulating and stabilizing matrix. The optimized Ir@SiO₂ suspensions were homogenously applied onto the cotton surface by dip-pad-dry-cure technique, as proved by the 2p-fluorescence microscope analysis. Once we verified the self-marker properties of the Ir(III) complex, we observed an excellent washing fastness of the coating with a very limited release. SiO₂ in the washing water was quantified at maximum around 1.5 wt% and Ir below the inductively coupled plasma optical emission spectrometry (ICP-OES) detection limit of 1 ppm. A Franz cell test was used to evaluate any possible ex-vivo uptake of Ir@SiO₂ nanoparticles across human skin tissues, showing that epidermis and dermis stop over 99% of Ir, implying a reduced impact on human health. The light-induced antimicrobial potential of the Ir@SiO₂ were assessed toward both Gram(−) and Gram(+) bacteria. The results encouraged further developments of such functional textiles coated by self-markers and antibacterial active nanophases.

Advances in photocatalytic self-cleaning, superhydrophobic and electromagnetic interference shielding textile treatments

The use of nanomaterials in textiles provides many new opportunities and advantages for users and manufacturers; however, it comes with some of its downsides and challenges which need to be understood and overcome for enhancing the applicability of these products. This review article discusses the recent progress in developing self-cleaning and conductive textiles as two of the leading research fields of smart textiles. In particular, different aspects of fabricating nanocoatings for photocatalytic self-cleaning, superhydrophobic and electromagnetic interference (EMI) shielding effect will be brought to light. The theoretical concepts, mechanisms, latest fabrication methods along with their potential applications will be discussed. Moreover, the current drawbacks of these fields will be underlined and some recommendations for future research trajectories in terms of performance, current limitations, sustainability and safety will be proposed. This review article provides a comprehensive review on the state-of-the-art achievements in the field, which will be a valuable reference for researchers and decision makers.

Nano TiO2 Imparting Multifunctional Performance on Dyed Polyester Fabrics with some Disperse Dyes Using High Temperature Dyeing as an Environmentally Benign Method

Polyester fabrics were dyed with prepared disperse dyes using the high temperature dyeing method. The dye exhaustion of the dye baths were compared to the low-temperature dyeing method in an attempt to study the proportion of the dye effluent solution that affects the environment. The dye uptake of the high temperature dyeing method (HT) of polyester fabric was compared with low temperature dyeing, hence (HT) increased the color strength of the investigated dyes by 309 and 265%. This means that the amount of dye present in the dye effluents by using the high-temperature dyeing method is almost non-existent, and this is reflected positively on the environment as these wastes pollute the environment. Post-treated polyester fabric was prepared through a two-step hot process after being immersed in a solution of Titanium (IV) oxide nanoparticle sizeTiO₂ NPs (21 nm primary particle size) at 80 °C followed by curing at 140 °C. The treated fabric realized an optimum UV protection factor of 34.9 and 283.6 degrees. These fabrics also demonstrated a strong ability to improve the light fastness properties. Finally, the potential applications of such value-added fabrics as self-cleaning and antifungal activities were investigated. The results indicated that the treated dyed fabrics with TiO₂ NPs endowed fabrics with the excellent self-cleaning of methylene blue dye. From the above, the treated fabrics with nano-titanium dioxide can be used in some promising fields, for example, medical ones.

Zinc Stannate Nanostructure: Is It a New Class of Material for Multifunctional Cotton Textiles?

This study demonstrates the synthesis of nano-zinc stannate and its application as a novel multifunctional finishing agent on cotton fabric. Nano-zinc stannate has been synthesized by the co-precipitation method, and the nanostructures produced have been characterized to investigate their morphology and microstructure by using scanning electron microscopy, transmission electron microscopy, and X-ray diffraction techniques. The synthesized nano-zinc stannate has been applied on cotton fabric and the multifunctional efficacies of the treated fabric, like UV resistance, antibacterial property, self-cleaning, as well as thermal stability, were analyzed. The as-synthesized zinc stannate-treated cotton fabric showed excellent efficiency in self-cleaning, antibacterial property, and flame-resistant action compared to the annealed nano-zinc stannate-treated cotton fabric. It was observed that the ultraviolet protection factor of the treated (annealed zinc stannate-treated) fabric shoot up more than 45 after treatment, and the same fabric showed more than 90% bacterial resistance against both Gram-positive and Gram-negative bacteria. Concerning thermal kinetics, the as-synthesized zinc stannate-treated fabric registered a 39% reduction in the peak heat release rate compared to the untreated cotton fabric, and it also showed catalyzed pyrolysis action and more amount of char mass (30-40% more compared to the control cotton) formation at higher temperature. The self-cleaning efficacy of the treated fabric has been examined against coffee stain and basic methylene blue dye. The treated fabric exhibited a good efficiency in cleaning of stain due to the free-radical scavenging behavior. Finally, it also has been proved that the integration of these nanostructure did not have any detrimental effect on the important physical properties (tensile strength, flexibility, and crease resistance) of the treated fabric.

Risk assessment due to dermal exposure of trace elements and indigo dye in jeans: Migration to artificial sweat

The concentration of a number of trace elements (Ag, Al, As, B, Ba, Be, Bi, Cd, Cr, Co, Cu, Fe, Mg, Mn, Mo, Ni, Pb, Sb, Sc, Se, Sm, Sr, Sn, Tl, Ti, V and Zn) were determined in 42 commercialized denim garments (jeans and shirts), being dermal exposure subsequently assessed. Migration experiments with artificial acid and basic sweat were also conducted to determine the release of these elements, as well as indigo dye. In a similar way than for the total content, Mg (124 and 99.4 µg/g) and Mn (27.1 and 7.20 µg/g) showed the highest concentrations in both artificial sweat, acid and basic, respectively. Indigo dye migrated at levels ranged from 3.22 to 7.76 mg/g, being higher in dark than in light blue fabrics. The levels of trace elements and indigo were analysed according to materials of fabric, colour, brand, and eco-labelling. Using total content and migrations rates, dermal exposure to trace elements for adult men, women and teenagers were calculated under the two sweat extractions. Non-carcinogenic and carcinogenic risks due to dermal exposure to the elements here analysed in cloths were assessed. Both risks were in the limits of safe to according to international regulations. However, the maximum exposure to Sb reached a hazard quotient (HQ) of 0.3 in clothes partially made of polyester. Despite some authors have established that indigo is an agonist of the aril receptor, health risks due to exposure to indigo dye were not calculated due the lack of toxicological data.

Hydrophobic and Corrosion Behavior of Sol-Gel Hybrid Coatings Based on the Combination of TiO2 NPs and Fluorinated Chains for Aluminum Alloys Protection

In this work, layers of a sol-gel hybrid matrix doped with metal oxide nanoparticles (TiO2 NPs) have been deposited on flat samples of AA6061-T6 aluminum alloy using the dip-coating technique, with the aim of obtaining coatings with better anti-corrosive and hydrophobic properties. Two different organic modified silica alkoxides, namely 3-(glycidyloxypropyl)trimethoxysilane (GPTMS) and methyltriethoxysilane (MTEOS), have been used for an adequate entrapment of the metal oxide nanoparticles. In addition, a fluorinated metal-alkoxide precursor has also been added to the hybrid matrix in order to improve the hydrophobic behavior. The experimental results corroborate that the presence of these TiO2 NPs play an important role in the development of the sol-gel hybrid coatings. The water contact angle (WCA) measurements, as well as pencil hardness tests indicate that TiO2 NPs make a considerable increase in the resultant hydrophobicity possible, with better mechanical properties of the coatings. The coating thickness has been measured by cross-section scanning electron microscopy (SEM). In addition, a glow discharge optical emission spectroscopy (GD-OES) analysis has been carried out in order to corroborate the adequate entrapment of the TiO2 NPs into the sol-gel coatings. Finally, potentiodynamic polarization tests and electrochemical impedance spectroscopy (EIS) have been performed in order to evaluate the corrosion resistance of the coatings. All the results provide insights into the efficacy of the developed sol-gel hybrid coatings for anticorrosive purposes with good mechanical properties.

Surface Coating for Flame Retardancy and Pyrolysis Behavior of Polyester Fabric Based on Calcium Alginate Nanocomposites

A polyester fabric, coated with calcium alginate and nano-calcium borate composites (CAB-PL), was fabricated by a post-cross-linking method, with remarkable improvement of flame retardancy and thermal stability, as compared with the original polyester fabric (PL). The mechanical properties of CAB-PL and PL were studied, and characterizations and tests including Fourier transform infrared spectrum (FTIR), scanning electron microscopy (SEM), limiting oxygen index (LOI), cone calorimetry (CONE) and thermogravimetric analysis (TGA) were employed to evaluate the flame retardancy and thermostability. The test results of CAB-PL showed excellent mechanical strength and anti-dripping properties. In comparison with PL, TGA results indicate that the presence of surface-coated composites produced more char residue and can effectively inhibit the heat transmission, and the LOI value of CAB-PL was improved from 25 to 33. Moreover, CONE results show that 88.65% reduction of total smoke release (TSR) values was induced by the presence of CAB. In addition, the possible pyrolysis mechanisms for CAB-PL have been proposed based on the results of pyrolysis-gas chromatography⁻mass spectrometry (Py-GC-MS) analysis. The combined results can provide useful information for understanding the flame retardant mechanisms of alginates as well. In summary, polyester fabric was upgraded by coating it with the calcium alginate/nano-calcium borate, thus achieving extraordinary flame retardancy and thermal stability for various applications within the textile industry.

Influence of Different Acids on the Transport of CdSe Quantum Dots from Polymer Nanocomposites to Food Simulants

We fabricated polymer nanocomposites (PNCs) from low-density polyethylene and CdSe quantum dots (QDs) and used these materials to explore potential exposure after long-term storage in different acidic media that could be encountered in food contact applications. While the low-level release of QD-associated mass into all the food simulants was observed, exposure to dilute acetic acid resulted in more than double the mass transfer compared to that which occurred during exposure to dilute hydrochloric acid at the same pH. Conversely, exposure to citric acid resulted in a suppression of QD release. Permeation experiments and confocal microscopy were used to reveal mechanistic details underlying these mass-transfer phenomena. From this work, we conclude that the permeation of undissociated acid molecules into the polymer, limited by partitioning of the acids into the hydrophobic polymer, plays a larger role than pH in determining exposure to nanoparticles embedded in plastics. Although caution must be exercised when extrapolating these results to PNCs incorporating other nanofillers, these findings are significant because they undermine current thinking about the influence of pH on nanofiller release phenomena. From a regulatory standpoint, these results also support current guidance that 3% acetic acid is an acceptable acidic food simulant for PNCs fabricated from hydrophobic polymers because the other acids investigated resulted in significantly less exposure.

The effect of titanium dioxide nanoparticles and UV irradiation on photocatalytic degradation of Imidaclopride

Imidaclopride is an insecticide widely used for pest control in agriculture around the world. It acts on the central nervous system of insects, while posing lower toxicity to mammals. This is an organic material made of Pyridinium, Dihydroimidazol and Nitramide. This structure poses a threat to the environment and humans. Until now, different types of methods have been used for elimination of this organic pollution. Recently, advanced oxidation processes (AOPs) are presented as a proposed method to remove this organic pollution. Photocatalytic degradation is also used as an efficient method for destruction of organic structures. In this study, the effect of titanium dioxide (TiO₂) nanoparticle as a photocatalyst activated by UV irradiation is investigated. The new design of the reactor was prepared with coaxial cylinders in which the inner cylinder is rotated at a constant speed. The reactor worked in two batch and continuous modes. The results show that the UV irradiation is more effective than activated TiO₂ nanoparticle, as the designed reactor with UV irradiation eliminated Imidaclopride in less than 2 hours.

Loading of chitosan - Nano metal oxide hybrids onto cotton/polyester fabrics to impart permanent and effective multifunctions

New and durable multifunctional properties of cotton/polyester blended fabrics were developed through loading of chitosan (Cs) and various metal oxide nanoparticles (MONPs) namely ZnO, TiO₂, and SiO₂ onto fabric surface using citric acid/Sodium hypophosphite for ester-crosslinking and creating new anchoring and binding sites, COOH groups, onto the ester-crosslinked fabrics surface. The surface morphology and the presence of active ingredients (Cs & MONPs) onto selected - coated fabric samples were analyzed by SEM images and confirmed by EDS spectrums. The influence of various finishing formulations on some performance and functional properties such as wettability, antibacterial activity, UV-protection, self-cleaning, resiliency and durability to wash were studied. The obtained results revealed that the extent of improvement in the imparted functional properties is governed by type of loaded-hybrid and follows the decreasing order: Cs-TiO₂NPs>Cs-ZnONPs>SiO₂NP_s>Cs alone, as well as kind of substrate cotton/polyester (65/35)>cotton/polyester (50/50). Moreover, after 15 washing cycles, the durability of the imparted functional properties of Cs/TiO₂NP_s - loaded substrates marginally decreased indicating the strong fixation of the hybrid components onto the ester-crosslinked substrates. The obtained bioactive multifunctional textiles can be used for producing eco-friendly protective textile materials for numerous applications.

Facile fabrication of hybrid PA6-decorated TiO2 fabrics with excellent photocatalytic, anti-bacterial, UV light-shielding, and super hydrophobic properties

A type of multi-functional self-cleaning fabric prepared through a green and eco-friendly method could be utilized in toxic dye removal, anti-bacterial, UV light-shielding and super hydrophobic material applications.

Multifunctional cellulose-containing fabrics using modified finishing formulations

High performance functional cellulose-containing fabrics were prepared by including ZrO–NPs, ZnO–NPs and TiO₂–NPs into traditional finishing formulations.

Innovative Self-Cleaning and Biocompatible Polyester Textiles Nano-Decorated with Fe-N-Doped Titanium Dioxide

The development of innovative technologies to modify natural textiles holds an important impact for medical applications, including the prevention of contamination with microorganisms, particularly in the hospital environment. In our study, Fe and N co-doped TiO₂ nanoparticles have been obtained via the hydrothermal route, at moderate temperature, followed by short thermal annealing at 400 °C. These particles were used to impregnate polyester (PES) materials which have been evaluated for their morphology, photocatalytic performance, antimicrobial activity against bacterial reference strains, and in vitro biocompatibility on human skin fibroblasts. Microscopic examination and quantitative assays have been used to evaluate the cellular morphology and viability, cell membrane integrity, and inflammatory response. All treated PES materials specifically inhibited the growth of Gram-negative bacilli strains after 15 min of contact, being particularly active against Pseudomonas aeruginosa. PES fabrics treated with photocatalysts did not affect cell membrane integrity nor induce inflammatory processes, proving good biocompatibility. These results demonstrate that the treatment of PES materials with TiO₂-1% Fe–N particles could provide novel biocompatible fabrics with short term protection against microbial colonization, demonstrating their potential for the development of innovative textiles that could be used in biomedical applications for preventing patients’ accidental contamination with microorganisms from the hospital environment.

Silver nanomaterials as future colorants and potential antimicrobial agents for natural and synthetic textile materials

Over the past few years, antimicrobial textiles have gained considerable interest for use in different application fields.

Functional Application of Noble Metal Nanoparticles In Situ Synthesized on Ramie Fibers

Different functions were imparted to ramie fibers through treatment with noble metal nanoparticles including silver and gold nanoparticles. The in situ synthesis of silver and gold nanoparticles was achieved by heating in the presence of ramie fibers in the corresponding solutions of precursors. The unique optical property of synthesized noble metal nanoparticles, i.e., localized surface plasmon resonance, endowed ramie fibers with bright colors. Color strength (K/S) of fibers increased with heating temperature. Silver nanoparticles were obtained in alkaline solution, while acidic condition was conducive to gold nanoparticles. The optical properties of treated ramie fibers were investigated using UV-vis absorption spectroscopy. Scanning electron microscopy (SEM) was employed to observe the morphologies of silver and gold nanoparticles in situ synthesized on fibers. The ramie fibers treated with noble metal nanoparticles showed remarkable catalytic activity for reduction of 4-nitrophenol (4-NP) by sodium borohydride. Moreover, the silver nanoparticle treatment showed significant antibacterial property on ramie fibers.

Nanomaterials for Functional Textiles and Fibers

Nanoparticles are very interesting because of their surface properties, different from bulk materials. Such properties make possible to endow ordinary products with new functionalities. Their relatively low cost with respect to other nano-additives make them a promising choice for industrial mass-production systems. Nanoparticles of different kind of materials such as silver, titania, and zinc oxide have been used in the functionalization of fibers and fabrics achieving significantly improved products with new macroscopic properties. This article reviews the most relevant approaches for incorporating such nanoparticles into synthetic fibers used traditionally in the textile industry allowing to give a solution to traditional problems for textiles such as the microorganism growth onto fibers, flammability, robustness against ultraviolet radiation, and many others. In addition, the incorporation of such nanoparticles into special ultrathin fibers is also analyzed. In this field, electrospinning is a very promising technique that allows the fabrication of ultrathin fiber mats with an extraordinary control of their structure and properties, being an ideal alternative for applications such as wound healing or even functional membranes.