Dosimetric evaluation of scattered and attenuated radiation due to dental restorations in head and neck radiotherapy

Particle tracking, recognition and LET evaluation of out-of-field proton therapy delivered to a phantom with implants

Objective.This study aims to assess the composition of scattered particles generated in proton therapy for tumors situated proximal to some titanium (Ti) dental implants. The investigation involves decomposing the mixed field and recording Linear Energy Transfer (LET) spectra to quantify the influence of metallic dental inserts located behind the tumor.Approach.A therapeutic conformal proton beam was used to deliver the treatment plan to an anthropomorphic head phantom with two types of implants inserted in the target volume (made of Ti and plastic, respectively). The scattered radiation resulted during the irradiation was detected by a hybrid semiconductor pixel detector MiniPIX Timepix3 that was placed distal to the Spread-out Bragg peak. Visualization and field decomposition of stray radiation were generated using algorithms trained in particle recognition based on artificial intelligence neural networks (AI NN). Spectral sensitive aspects of the scattered radiation were collected using two angular positions of the detector relative to the beam direction: 0° and 60°.Results.Using AI NN, 3 classes of particles were identified: protons, electrons & photons, and ions & fast neutrons. Placing a Ti implant in the beam's path resulted in predominantly electrons and photons, contributing 52.2% of the total number of detected particles, whereas for plastic implants, the contribution was 65.4%. Scattered protons comprised 45.5% and 31.9% with and without metal inserts, respectively. The LET spectra were derived for each group of particles identified, with values ranging from 0.01 to 7.5 keVμm-1for Ti implants/plastic implants. The low-LET component was primarily composed of electrons and photons, while the high-LET component corresponded to protons and ions.Significance.This method, complemented by directional maps, holds the potential for evaluating and validating treatment plans involving stray radiation near organs at risk, offering precise discrimination of the mixed field, and enhancing in this way the LET calculation.

Effects of modern aesthetic dental fillings on proton therapy

Background and purpose

High-density dental fillings pose a non-negligible impact on head and neck cancer treatment. For proton therapy, stopping power ratio (SPR) prediction will be significantly impaired by the associated image artifacts. Dose perturbation is also inevitable, compromising the treatment plan quality. While plenty of work has been done on metal or amalgam fillings, none has touched on composite resin (CR) and glass ionomer cement (GIC) which have seen an increasing usage. Hence, this work aims to provide a detailed characterisation of SPR and dose perturbation in proton therapy caused by CR and GIC.

Materials and methods

Four types of fillings were used: CR, Fuji Bulk (FB), Fuji II (FII) and Fuji IX (FIX). The latter three belong to GIC category. Measured SPR were compared with SPR predicted using single-energy computed tomography (SECT) and dual-energy computed tomography (DECT). Dose perturbation of proton beams with lower- and higher-energy levels was also quantified using Gafchromic films.

Results

The measured SPR for CR, FB, FII and FIX were 1.68, 1.77, 1.77 and 1.76, respectively. Overall, DECT could predict SPR better than SECT. The lowest percentage error achieved by DECT was 19.7 %, demonstrating the challenge in estimating SPR, even for fillings with relatively lower densities. For both proton beam energies and all four fillings of about 4.5 mm thickness, the maximum dose perturbation was 3 %.

Conclusion

This study showed that dose perturbation by CR and GIC was comparatively small. We have measured and recommended the SPR values for overriding the fillings in TPS.

Scattering of therapeutic radiation in the presence of craniofacial bone reconstruction materials

Purpose

Radiation scattering from bone reconstruction materials can cause problems from prolonged healing to osteoradionecrosis. Glass fiber reinforced composite (FRC) has been introduced for bone reconstruction in craniofacial surgery but the effects during radiotherapy have not been previously studied. The purpose of this study was to compare the attenuation and back scatter caused by different reconstruction materials during radiotherapy, especially FRC with bioactive glass (BG) and titanium.

Methods

The effect of five different bone reconstruction materials on the surrounding tissue during radiotherapy was measured. The materials tested were titanium, glass FRC with and without BG, polyether ether ketone (PEEK) and bone. The samples were irradiated with 6 MV and 10 MV photon beams. Measurements of backscattering and dose changes behind the sample were made with radiochromic film and diamond detector dosimetry.

Results

An 18% dose enhancement was measured with a radiochromic film on the entrance side of irradiation for titanium with 6 MV energy while PEEK and FRC caused an enhancement of 10% and 4%, respectively. FRC‐BG did not cause any measurable enhancement. The change in dose immediately behind the sample was also greatest with titanium (15% reduction) compared with the other materials (0–1% enhancement). The trend is similar with diamond detector measurements, titanium caused a dose enhancement of up to 4% with a 1 mm sample and a reduction of 8.5% with 6 MV energy whereas FRC, FRC‐BG, PEEK or bone only caused a maximum dose reduction of 2.2%.

Conclusions

Glass fiber reinforced composite causes less interaction with radiation than titanium during radiotherapy and could provide a better healing environment after bone reconstruction.

Dose perturbation due to dental amalgam in the head and neck radiotherapy: A phantom study

Dental amalgam, causes perturbation in photon dose distribution of head and neck (H&N) radiotherapy. The aim of this study was to evaluate the effects of dental amalgam on dose distribution of H&N radiotherapy and accuracy of dose calculations algorithm of commercial treatment planning system (TPS). In this study, the measurements were performed using a constructed H&N anthropomorphic. The sample of healthy teeth and teeth filled by amalgam inserted in the desired segment of the phantom in turn. After scanning and organs segmentation of phantom, intensity-modulated radiation therapy (IMRT) plan including 7 fields in the absence (plan 1) and presence (plan 2) of dental amalgam were created separately. Phantom was irradiated using 6 MV linear accelerator (SIMENS-ARTISTE, 5918). Assessment of the effects of dental amalgam on dose distribution and the accuracy of dose calculation algorithm of TPS was done by measurement and comparing of organ's received dose using thermoluminescent dosimeter (TLDs), placed on a phantom and TPS calculations. The scattering and attenuation due to the presence of dental amalgam led to an increase in parotid glands received dose (up to 24.38%) and a decrease in mean dose (up to -6.25%) PTV70. Results of this study revealed that discrepancies between the collapsed cone convolution (CCC) algorithm calculations Prowess Panther TPS and TLD measurements were -19.77% to 27.49% in presence of amalgam and -1.09% to 5.03% in presence of healthy teeth in phantoms. Attenuation and scattering due to amalgam in IMRT of H&N cancer may lead to a significant dose perturbation which is not predictable by dose calculation of TPS.