Metal–organic frameworks and their catalytic applications

From 0D-complex to 3D-MOF: changing the antimicrobial activity of zinc(II) via reaction with aminocinnamic acids

Combining zinc nitrate with 3- and/or 4- aminocinnamic acid (3-ACA and 4-ACA, respectively) leads to the formation of the 0D complex [Zn(4-AC)2(H2O)2], the 1D coordination polymer [Zn(3-AC)(4-AC)], and the 2D and 3D MOFs [Zn(3-AC)2]∙2H2O and [Zn(4-AC)2]∙H2O, respectively. These compounds result from the deprotonation of the acid molecules, with the resulting 3- and 4-aminocinnamate anions serving as bidentate terminal or bridging ligands. All solids were fully characterized via single crystal and powder X-ray diffraction and thermal techniques. Given the mild antimicrobial properties of cinnamic acid derivatives and the antibacterial nature of the metal cation, these compounds were assessed and demonstrated very good planktonic cell killing as well as inhibition of biofilm growth against Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus.

Postsynthetic Modification of Amine-Functionalized MIL-101(Cr) Metal-Organic Frameworks with an EDTA-Zn(II) Complex as an Effective Heterogeneous Catalyst for Hantzsch Synthesis of Polyhydroquinolines

The present work aims at preparing the EDTA-Zn(II) complex-supported on the amine-functionalized MIL-101(Cr) MOF-as a new and effective heterogenized catalyst. The optimization of the hydrothermal process shows that 120 °C is the best condition to grow the MIL-101(Cr)-NH2 MOF crystals. Moreover, regarding the use of the postsynthetic modification (PSM) method, hexadentate EDTA was grafted on this support via a simple aminolysis process before further coordinating it with Zn ions to create the corresponding Zn(II) catalytic complex. The catalytic activity of this compound was then investigated in the context of a one-pot synthesis of polyhydroquinolines. This approach has a number of advantages including the following: the use of a solvent that is not hazardous, applying a porous catalyst that is inexpensive, secure, and recyclable; rapid reaction times, high levels of efficiency, and the simplicity of MOF catalyst separation. Accordingly, the process in question can be given the label of "green chemistry".

MOFs and MOF-Based Composites as Next-Generation Materials for Wound Healing and Dressings

In recent years, there has been growing interest in developing innovative materials and therapeutic strategies to enhance wound healing outcomes, especially for chronic wounds and antimicrobial resistance. Metal-organic frameworks (MOFs) represent a promising class of materials for next-generation wound healing and dressings. Their high surface area, pore structures, stimuli-responsiveness, antibacterial properties, biocompatibility, and potential for combination therapies make them suitable for complex wound care challenges. MOF-based composites promote cell proliferation, angiogenesis, and matrix synthesis, acting as carriers for bioactive molecules and promoting tissue regeneration. They also have stimuli-responsivity, enabling photothermal therapies for skin cancer and infections. Herein, a critical analysis of the current state of research on MOFs and MOF-based composites for wound healing and dressings is provided, offering valuable insights into the potential applications, challenges, and future directions in this field. This literature review has targeted the multifunctionality nature of MOFs in wound-disease therapy and healing from different aspects and discussed the most recent advancements made in the field. In this context, the potential reader will find how the MOFs contributed to this field to yield more effective, functional, and innovative dressings and how they lead to the next generation of biomaterials for skin therapy and regeneration.

URJC-1: Stable and Efficient Catalyst for O-Arylation Cross-Coupling

The design of metal-organic frameworks (MOFs) allows the definition of properties for their final application in small-scale heterogeneous catalysis. Incorporating various catalytic centers within a single structure can produce a synergistic effect, which is particularly intriguing for cross-coupling reactions. The URJC-1 material exhibits catalytic duality: the metal centers act as Lewis acid centers, while the nitrogen atoms of the organic ligand must behave as basic centers. The impact of reaction temperature, catalyst concentration, and basic agent concentration was evaluated. Several copper-based catalysts, including homogeneous and heterogeneous MOF catalysts with and without the presence of nitrogen atoms in the organic ligand, were assessed for their catalytic effect under optimal conditions. Among the catalysts tested, URJC-1 exhibited the highest catalytic activity, achieving complete conversion of 4-nitrobenzaldehyde with only 3% mol copper concentration in one hour. Furthermore, URJC-1 maintained its crystalline structure even after five reaction cycles, demonstrating remarkable stability in the reaction medium. The study also examined the impact of various substituents of the substrate alcohol on the reaction using URJC-1. The results showed that the reaction had high activity when activating substituents were present and for most cyclic alcohols rather than linear ones.

Copper oxides supported sulfur-doped porous carbon material as a remarkable catalyst for reduction of aromatic nitro compounds

Synthesis and manufacturing of metal-organic framework derived carbon/metal oxide nanomaterials with an advisable porous structure and composition are essential as catalysts in various organic transformation processes for the preparation of environmentally friendly catalysts. In this work, we report a scalable synthesis of sulfur-doped porous carbon-containing copper oxide nanoparticles (marked CuxO@CS-400) via direct pyrolysis of a mixture of metal-organic framework precursor called HKUST-1 and diphenyl disulfide for aromatic nitro compounds reduction. X-ray diffraction, surface area analysis (BET), X-ray energy diffraction (EDX) spectroscopy, thermal gravimetric analysis, elemental mapping, infrared spectroscopy (FT-IR), transmission electron microscope, and scanning electron microscope (FE-SEM) analysis were accomplished to acknowledge and investigate the effect of S and CuxO as active sites in heterogeneous catalyst to perform the reduction-nitro aromatic compounds reaction in the presence of CuxO@CS-400 as an effective heterogeneous catalyst. The studies showed that doping sulfur in the resulting carbon/metal oxide substrate increased the catalytic activity compared to the material without sulfur doping.

Synthesis and Modification of a Natural Polymer with the Participation of Metal Nanoparticles, Study of Their Composition and Properties

A magnetic polymer material based on natural polymers-humic acids and magnetite, pre-configured for the sorption of a metal ion-was obtained. The magnetic polymer material was obtained via the interaction of a natural polymer, magnetite nanoparticles and sorbed metal ions that were used as a template. Moreover, the formation of a pre-polymerization complex was followed by copolycondensation with an amine in the presence of a crosslinking agent and further removal of metal ions from the crosslinked copolymer. The physicochemical properties of the resulting materials were determined using various physical methods. The composition of the resulting magnetic polymer materials was characterized by elemental analysis using an Elementar Unicube elemental analyzer. It was found that the carbon content increases by 8.28% and nitrogen by 0.42% for the polymer material Fe3O4:HA:T:AA; for the polymer material Fe3O4:HA:AA, the carbon content increases by 14.61% and nitrogen by 3.01%. Based on the IR spectra data, it is clear that magnetic polymer materials have much in common before hydrolysis (Fe3O4:HA:T:AA) and after hydrolysis (Fe3O4:HA:AA). The structure of the resulting polymer materials was studied using electron microscopy. Micrographs show the presence of pores in magnetic polymer materials after acid hydrolysis, indicating the formation of imprints. The results of the study of the sorption properties of magnetic polymer materials showed that after acid hydrolysis, the sorption capacity of a customized magnetic polymer material increases two times and it can act as a magnetic sorption material.

A roadmap to enhance gas permselectivity in metal-organic framework-based mixed-matrix membranes

Performing gas separation at high efficiency with minimum energy input and reduced carbon footprint is a major challenge. While several separation methods exist at various technology readiness levels, porous membrane-based separation is considered as a disruptive technology. To attain sustainability and required efficiency, different approaches of membrane design have been explored. However, the selectivity-permeation trade-off and membrane aging have restricted further advancement. In this regard, a new generation composite made of organic polymers and metal-organic framework (MOF) fillers shows substantial promise. Organic polymer matrix allows easy processibility, but it has poor permselectivity for gas molecules. Metal-organic frameworks are excellent sieving materials; however, they suffer from poor processibility issues. A combination of these two components makes an ideal sieving membrane, which can potentially outnumber the existing energy intensive distillation strategies. In this perspective, we have discussed key indices that regulate gas permselectivity by a careful selection of the existing literature. While the target gas flux and selectivity values have been a part of many previous reviews and articles, we have presented a concise discussion on the interface design of the MOF-polymer membrane, morphology, and orientation control of MOF fillers in the matrix. Following this, a future roadmap to overcome challenges related to MOF-polymer interfacial defects is outlined.

Ionic Liquids Hybridization for Carbon Dioxide Capture: A Review

CO2 absorption has been driven by the need for efficient and environmentally sustainable CO2 capture technologies. The development in the synthesis of ionic liquids (ILs) has attracted immense attention due to the possibility of obtaining compounds with designated properties. This allows ILs to be used in various applications including, but not limited to, biomass pretreatment, catalysis, additive in lubricants and dye-sensitive solar cell (DSSC). The utilization of ILs to capture carbon dioxide (CO2) is one of the most well-known processes in an effort to improve the quality of natural gas and to reduce the green gases emission. One of the key advantages of ILs relies on their low vapor pressure and high thermal stability properties. Unlike any other traditional solvents, ILs exhibit high solubility and selectivity towards CO2. Frequently studied ILs for CO2 absorption include imidazolium-based ILs such as [HMIM][Tf2N] and [BMIM][OAc], as well as ILs containing amine groups such as [Cho][Gly] and [C1ImPA][Gly]. Though ILs are being considered as alternative solvents for CO2 capture, their full potential is limited by their main drawback, namely, high viscosity. Therefore, the hybridization of ILs has been introduced as a means of optimizing the performance of ILs, given their promising potential in capturing CO2. The resulting hybrid materials are expected to exhibit various ranges of chemical and physical characteristics. This review presents the works on the hybridization of ILs with numerous materials including activated carbon (AC), cellulose, metal-organic framework (MOF) and commercial amines. The primary focus of this review is to present the latest innovative solutions aimed at tackling the challenges associated with IL viscosity and to explore the influences of ILs hybridization toward CO2 capture. In addition, the development and performance of ILs for CO2 capture were explored and discussed. Lastly, the challenges in ILs hybridization were also being addressed.

Ultrasounds assisted one-pot oxidative desulfurization of model fuel using green synthesized aluminum terephthalate [MIL-53(Al)]

Oxidative desulfurization (ODS) is considered to be one of the most promising desulfurization processes as it is energy-efficient and requires mild operating conditions. In this study, a novel green synthesized Al- based metal-organic framework with high surface area has been synthesized hydrothermally using waste polyethylene terephthalate bottles (PET) as a source of terephthalic acid as an organic linker. The prepared Al based MOF have been characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscopy (TEM). The catalytic activity of the prepared Al-MOF was evaluated in the oxidative desulfurization (ODS) of both modeled and real crude oil samples. The different operating parameters (temperature, time, catalyst dose, oxidant loading and sonication) on the ODS performance have been optimized. The optimal conditions for maximum removal of thiophene from modeled oil samples were found to be 30 min, 0.5 g of catalyst and 1:3 oil to oxidant ratio. Under the optimized conditions, sulfur removal in real oil samples obtained from Alexandria petroleum company was 90%. The results revealed that, the presented approach is credited to cost-effectiveness, environmental benignity, and ease of preparation, predicting great prospects for desulfurization of fuel oils on a commercial level.

Constructing Physiological Defense Systems against Infectious Disease with Metal-Organic Frameworks: A Review

The swift and deadly spread of infectious diseases, alongside the rapid advancement of scientific technology in the past several centuries, has led to the invention of various methods for protecting people from infection. In recent years, a class of crystalline porous materials, metal-organic frameworks (MOFs), has shown great potential in constructing defense systems against infectious diseases. This review addresses current approaches to combating infectious diseases through the utilization of MOFs in vaccine development, antiviral and antibacterial treatment, and personal protective equipment (PPE). Along with an updated account of MOFs used for designing defense systems against infectious diseases, directions are also suggested for expanding avenues of current MOF research to develop more effective approaches and tools to prevent the widespread nature of infectious diseases.

ZIF-8 Nanoparticles Induce Behavior Abnormality and Brain Oxidative Stress in Adult Zebrafish (Danio rerio)

Zeolitic imidazolate framework-8 nanoparticles (ZIF-8 NPs) are typical metal-organic framework (MOF) materials and have been intensively studied for their potential application in drug delivery and environmental remediation. However, knowledge of their potential risks to health and the environment is still limited. Therefore, this study exposed female and male zebrafish to ZIF-8 NPs (0, 9.0, and 90 mg L^-1) for four days. Subsequently, variations in their behavioral traits and brain oxidative stress levels were investigated. The behavioral assay showed that ZIF-8 NPs at 90 mg/L could significantly decrease the locomotor activity (i.e., hypoactivity) of both genders. After a ball falling stimulation, zebrafish exposed to ZIF-8 NPs (9.0 and 90 mg L^-1) exhibited more freezing states (i.e., temporary cessations of movement), and males were more sensitive than females. Regardless of gender, ZIF-8 NPs exposure significantly reduced the SOD, CAT, and GST activities in the brain of zebrafish. Correlation analysis revealed that the brain oxidative stress induced by ZIF-8 NPs exposure might play an important role in their behavioral toxicity to zebrafish. These findings highlight the necessity for further assessment of the potential risks of MOF nanoparticles to aquatic species and the environment.

Typing of cancer cells by microswimmer based on Co-Fe-MOF for one-step simultaneously detect multiple biomarkers

Capturing, identifying, and counting CTCs cancer cells that have escaped from the tumor and wandered into the bloodstream is a major challenge. We proposed a noval microswimmer dual-mode aptamer (electrochemical and fluorescent)-(Mapt-EF) homogeneous sensor with active capture/controlled release double signaling molecule/separation and release cell based on the Co-Fe-MOF nanomaterial for simultaneous one-step detection of multiple biomarkers protein tyrosine kinase-7 (PTK7), Epithelial cell adhesion molecule (EpCAM), and mucin-1 (MUC1) for diagnosis of multiple cancer cell types. The Co-Fe-MOF is a nano-enzyme capable of catalyzing the decomposition of hydrogen peroxide to release bubbles of oxygen, producing a driving force to conduct hydrogen peroxide through the liquid, and has the capacity to self-decompose during the catalytic process. Phosphoric acid is present in the aptamer chains of PTK7, EpCAM, and MUC1, and the aptamer chains are adsorbed to the surface of the Mapt-EF homogeneous sensor in the form of a gated switch to inhibit the catalytic decomposition activity of hydrogen peroxide. The Mapt-EF homogeneous sensor has the capability to actively target biomarkers that can be entrained by oxygen bubbles without being degraded. The detection time of the sensor was 20 min, the detection limits were 9.6 fg/mL, 8.4 fg/mL and 7.7 fg/mL with the linear range was 0-20 pg/mL, respectively. The Mapt-EF homogeneous sensor has high detection sensitivity, and its detection limit can reach the level of single cell at the lowest. The Mapt-EF homogeneous sensor has great application potential in clinical detection and analysis of tumor cells.

Ultrasonic-Assisted Fabrication of MIL-100(Fe) Metal-Organic Frameworks as a Carrier for the Controlled Delivery of the Chloroquine Drug

Metal-organic framework materials (MOFs) are materials with an ordered crystalline structure and high porosity that have been intensively investigated for many applications, such as gas adsorption, catalysis, sensors, drug delivery, and so on. Among them, the MOF-based drug delivery system has received increasing interest from scientists worldwide. This work presented the preparation of the MIL-100(Fe) metal-organic framework from the organic ligand of trimesic acid and iron ions with ultrasonic assistance. Scanning electron microscopy (SEM), Brunauer-Emmett-Teller surface area (BET), X-ray diffraction (XRD), infrared spectroscopy (FTIR), and Raman spectroscopy were employed to characterize the prepared MIL-100(Fe) material. MIL-100(Fe) materials synthesized by the ultrasonic method have uniform particle morphology ranging from 100 to 300 nm with a surface area of 1033 m²/g. The prepared MIL-100(Fe) was employed as a carrier for delivering chloroquine drug with a maximal loading capacity of 220 mg/g. The MIL-100(Fe)@chloroquine system was also characterized in detail. The delivery system's slow drug release was studied, showing that nearly 80% of chloroquine molecules were released after 7.5 h of immersing time in PBS and simulated gastric solutions and completely detached from the MIL-100(Fe)@chloroquine system only after approximately 80 h. This result shows the ability to control chloroquine drug release of the material, reducing the possibility of drug shock.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

Facile synthesis of CoFe2O4@MIL-53(Al) nanocomposite for fast dye removal: Adsorption models, optimization and recyclability

The global occurrence of textile dyes pollution has recently emerged, posing a serious threat to ecological systems. To abate dye contamination, we here developed a novel magnetic porous CoFe₂O₄@MIL-53(Al) nanocomposite by incorporating magnetic CoFe₂O₄ nanoparticles with MIL-53(Al) metal-organic framework. This nanocomposite possessed a surface area of 197.144 m² g^-1 and a pore volume of 0.413 cm³ g^-1. The effect of contact time (5-120 min), concentration (5-50 mg L^-1), dosage (0.1-1.0 g L^-1), and pH (2-10) on Congo red adsorption was clarified. CoFe₂O₄@MIL-53(Al) could remove 95.85% of Cong red dye from water with an accelerated kinetic rate of 0.6544 min^-1 within 10 min. The kinetic and isotherm models showed the predominance of Bangham and Temkin. According to Langmuir, the maximum uptake capacities of CoFe₂O₄@MIL-53(Al), CoFe₂O₄, and MIL-53(Al) adsorbents were 43.768, 17.982, and 15.295 mg g^-1, respectively. CoFe₂O₄@MIL-53(Al) was selected to optimize Cong red treatment using Box-Behnken experimental design. The outcomes showed that CoFe₂O₄@MIL-53(Al) achieved the highest experimental uptake capacity of 35.919 mg g^-1 at concentration (29.966 mg L^-1), time (14.926 min), and dosage (0.486 g L^-1). CoFe₂O₄@MIL-53(Al) could treat dye mixture (methylene blue, methyl orange, Congo red, malachite green, and crystal violet) with an outstanding removal efficiency of 81.24% for 30 min, and could be reused up to five cycles. Therefore, novel recyclable and stable CoFe₂O₄@MIL-53(Al) is recommended to integrate well with real dye treatments systems.

Confined-based catalyst investigation through the comparative functionalization and defunctionalization of Zr-MOF

In metal–organic frameworks, confined space as a chemical nanoreactor is as important as organocatalysis or coordinatively unsaturated metal site catalysis. In the present study, a set of mixed-ligand structures with UiO-66 architecture have been prepared. To the best of our knowledge, for the first time, structures derived by the solvothermal mixing ligand method and ultrasonic-assisted linker exchange approaches have been compared. Additionally, the relationship between the preparation method, structural properties, and catalytic efficiency of the prepared materials in the Knoevenagel condensation of aldehydes has been investigated. The prepared catalyst is very stable and can be recovered and reused for at least ten periods.

In metal–organic frameworks, confined space as a chemical nanoreactor is as important as organocatalysis or coordinatively unsaturated metal site catalysis.

Introduction of a Zn-based metal-organic framework @ biomass porous activated carbon as a high-sensitive coating for a stainless steel SPME fiber: application to the simultaneous analysis of nonsteroidal anti-inflammatory drugs

The present study introduces a high-efficiency nanocomposite material featuring a zinc-based metal-organic framework and a novel porous activated carbon derived from bread waste. The prepared nanocomposite, namely Zn-MOF-5@BHPAC, has been synthesized by a low-temperature hydrothermal process and coated onto the surface of a stainless steel wire with epoxy glue. The fabricated fiber has been employed as an SPME fiber applied in the extraction and pre-concentration of some nonsteroidal anti-inflammatory drugs (NSAIDs) before their high-performance liquid chromatography-ultraviolet (HPLC-UV) studies. The characterization studies were performed utilizing field emission scanning electron microscopy, elemental mapping, energy-dispersive X-ray spectroscopy, elemental analyzer, Fourier-transform infrared spectroscopy, and Brunauer-Emmett-Teller surface area analysis. Under the optimal conditions, the method demonstrated low detection limits (LODs, 0.06-0.15 µg L-1), wide linear ranges (LRs, 0.20-380 µg L-1) with good linearity (R2 > 0.991), good precisions (RSDs < 6.95%), and acceptable relative recoveries (RR > 85%). Using the green and affordable biomass of bread as a novel carbon-rich source is an innovative idea provided in this study. In addition, the hybridization of the obtained carbon-based material with the MOF compound to create a new high-capacity sorbent is another strength of the proposed method. Long service lifetime, economic efficiency, environmental friendliness, and high extraction capability were some of the other advantages of the suggested procedure. Therefore, the method can utilize successfully for the simultaneous determination of NSAIDs (as model analytes) in different matrixes.

Identifying the Gate-Opening Mechanism in the Flexible Metal-Organic Framework UTSA-300

Atomic-level understanding of the gate-opening phenomenon in flexible porous materials is an important step toward learning how to control, design, and engineer them for applications such as the separation of gases from complex mixtures. Here, we report such mechanistic insight through an in-depth study of the pressure-induced gate-opening phenomenon in our earlier reported metal-organic framework (MOF) Zn(dps)₂(SiF₆) (dps = 4,4'-dipyridylsulfide), also called UTSA-300, using isotherm and calorimetry measurements, in situ infrared spectroscopy, and ab initio simulations. UTSA-300 is shown to selectively adsorb acetylene (C₂H₂) over ethylene (C₂H₄) and ethane (C₂H₆) and undergoes an abrupt gate-opening phenomenon, making this framework a highly selective gas separator of this complex mixture. The selective adsorption is confirmed by pressure-dependent in situ infrared spectroscopy, which, for the first time, shows the presence of multiple C₂H₂ species with varying strengths of bonding. A rare energetic feature at the gate-opening condition of the flexible MOF is observed in our differential heat energies, directly measured by calorimetry, showcasing the importance of this tool in adsorption property exploration of flexible frameworks and offering an energetic benchmark for further energy-based fundamental studies. Based on the agreement of this feature with ab initio-based adsorption energies of C₂H₂ in the closed-pore structure UTSA-300a ("a" refers to the activated form), this feature is assigned to the weakening of the H-bond C-H···F formed between C₂H₂ and fluorine of the MOF. Our analysis identifies the weakening of this H-bond, the expansion of the closed-pore MOF upon successive C₂H₂ coadsorption until its volume is close to that of the open-pore MOF, and the spontaneous gate opening to energetically favor C₂H₂ adsorption in the open-pore structure as crucial steps in the gate-opening mechanism in this system.

A Comprehensive Review on the Use of Metal–Organic Frameworks (MOFs) Coupled with Enzymes as Biosensors

Several studies have shown the development of electrochemical biosensors based on enzymes immobilized in metal–organic frameworks (MOFs). Although enzymes have unique properties, such as efficiency, selectivity, and environmental sustainability, when immobilized, these properties are improved, presenting significant potential for several biotechnological applications. Using MOFs as matrices for enzyme immobilization has been considered a promising strategy due to their many advantages compared to other supporting materials, such as larger surface areas, higher porosity rates, and better stability. Biosensors are analytical tools that use a bioactive element and a transducer for the detection/quantification of biochemical substances in the most varied applications and areas, in particular, food, agriculture, pharmaceutical, and medical. This review will present novel insights on the construction of biosensors with materials based on MOFs. Herein, we have been highlighted the use of MOF for biosensing for biomedical, food safety, and environmental monitoring areas. Additionally, different methods by which immobilizations are performed in MOFs and their main advantages and disadvantages are presented.

Ab initio molecular dynamics with enhanced sampling in heterogeneous catalysis

Enhanced sampling ab initio simulations enable to study chemical phenomena in catalytic systems including thermal effects & anharmonicity, & collective dynamics describing enthalpic & entropic contributions, which can significantly impact on reaction free energy landscapes.

Metal-Free Chemoselective Oxidation of 4-Methylquinolines into Quinoline-4-Carbaldehydes

A convenient protocol for the synthesis of quinoline-4-carbaldehydes via chemoselective oxidation of 4-methylquinolines using hypervalent iodine(III) reagents as oxidant is described. This method highlights metal-free and mild reaction conditions, nice yield, good functional group tolerance, and high chemoselectivity.

Water Bridges Substitute for Defects in Amine-Functionalized UiO-66, Boosting CO2 Adsorption

The binary adsorption of CO₂ and water on an amine-functionalized UiO-66 metal-organic framework (MOF) was studied experimentally and computationally. Grand canonical Monte Carlo simulations were used to investigate three additional UiO-66 MOFs with different functionalized linkers. Each MOF was studied in a defect-free form as well as two additional forms with precise linker defects. Binary adsorption isotherms are presented for CO₂ at specific water loadings. While water loading in defect-free MOFs reduces the CO₂ uptake, the defects slightly boost the CO₂ uptake at low water loadings. It was found that water bridges form between the metal oxide cores, replacing the missing linkers. Effectively, this creates smaller pores that are more welcoming of CO₂ adsorption. Experimental measurement of the binary isotherms for UiO-66-NH₂ shows a behavior that is consistent with this enhancement.

Quasielastic neutron scattering study on proton dynamics assisted by water and ammonia molecules confined in MIL-53

Dynamics of water and other small molecules confined in nanoporous materials is one of the current topics in condensed matter physics. One popular host material is a benzenedicarboxylate-bridging metal (III) complex abbreviated to MIL-53, whose chemical formula is M(OH)[C6H2(CO2)2R2] where M = Cr, Al, Fe and R = H, OH, NH2, COOH. These materials absorb not only water but also ammonia molecules. We have measured the quasi-elastic neutron scattering of MIL-53(Fe)-(COOH)2·2H2O and MIL-53(Fe)-(COOH)2·3NH3 which have full guest occupancy and exhibit the highest proton conductivity in the MIL-53 family. In a wide relaxation time region (τ = 10-12-10-8 s), two relaxations with Arrhenius temperature dependence were found in each sample. It is of interest that their activation energies are smaller than those of bulk H2O and NH3 liquids. The momentum transfer dependence of the relaxation time and the temperature dependence of the relaxation intensity suggest that the proton conduction is due to the Grotthuss mechanism with thermally excited H2O and NH3 molecules.

Electrospun Cobalt-Incorporated MOF-5 Microfibers as a Promising Electrocatalyst for OER in Alkaline Media

Metal-organic framework (MOF)-based materials have attracted attention in recent times owing to their remarkable properties such as regulatable pore size, high specific surface area, and elasticity in their network topology, geometry, dimension, and chemical functionality. It is believed that the incorporation of a MOF network into a fibrous matrix results in the improvement of the electrocatalytic properties of the material. Herein, we have synthesized a Co-incorporated MOF-5-based fibrous material by a simple wet-chemical method, followed by an electrospinning (ES) process. The as-prepared Co-incorporated MOF-5 microfibers were employed as an electrocatalyst for the oxygen evolution reaction (OER) in 1 M KOH electrolyte. The catalyst demands a lower overpotential of 240 mV to attain a current density of 10 mA/cm² with a lower Tafel slope value of 120 mV/dec along with a charge transfer resistance value of 2.9 Ω from electron impedance spectroscopy (EIS) analysis. From these results, it has been understood that the incorporation of Co metal into the MOF-5 microfibrous network has significantly improved the OER performance, which made them a potential entrant in other energy-related applications also.

Porous carbon derived from ZIF-8 modified molecularly imprinted electrochemical sensor for the detection of tert-butyl hydroquinone (TBHQ) in edible oil

In this manuscript, ZIF-8 derived nanoporous carbon material (ZC) was prepared and used as modification material to construct a molecularly imprinted electrochemical sensor for the direct detection of tert-butyl hydroquinone (TBHQ) in edible oil. Electrochemical characterizations, scanning electron microscopy and X-ray diffraction show that ZC has excellent conductivity, high electrochemical active area and stable porous framework structure. Using TBHQ as template and o-phenylenediamine as functional monomer, the sensor was constructed. Experimental parameters such as the number of polymerization cycle, polymerization speed, and pH of the measured solution, removal and rebinding time were studied. Under optimized conditions, the prepared sensor showed a wider linear range from 1.0 μmol L^-1 to 75.0 μmol L^-1 with the detection limit of 0.42 μmol L^-1 (S/N = 3). Meanwhile, the sensor also expressed good selectivity, repeatability, reproducibility, stability and successfully applied for the determination of TBHQ in real edible oil, giving satisfactory results.

Copper(II) 2,2-Bis(Hydroxymethyl)Propionate Coordination Compounds with Hexamethylenetetramine: From Mononuclear Complex to One-Dimensional Coordination Polymer

Three new copper coordination compounds derived from 2,2-bis(hydroxymethyl)propionic acid (dmpa) and hexamethylenetetramine (hmta) were obtained and their crystal structures were determined. The stoichiometry of the reagents applied in the syntheses reflects the metal to ligand molar ratio in the formed solid products. Due to the multiple coordination modes of the used ligands, wide structural diversity was achieved among synthesized compounds, i.e., mononuclear [Cu(dmp)₂(hmta)₂(H₂O)] (1), dinuclear [Cu₂(dmp)₄(hmta)₂] (2), and 1D coordination polymer [Cu₂(dmp)₄(hmta)]_n (3). Their supramolecular structures are governed by O—H•••O and O—H•••N hydrogen bonds. The compounds were characterized in terms of absorption (UV-Vis and IR) and thermal properties. The relationships between structural features and properties were discussed in detail. Owing to discrepancies in the coordination mode of a dmp ligand, bidentate chelating in 1, and bidentate bridging in 2 and 3, there is a noticeable change in the position of the bands corresponding to the stretching vibrations of the carboxylate group in the IR spectra. The differences in the structures of the compounds are also reflected in the nature and position of the UV-Vis absorption maxima, which are located at lower wavelengths for 1.

Cobalt-based metal-organic frameworks for the photocatalytic reduction of carbon dioxide

Metal-organic frameworks (MOFs) are porous materials composed of metal centers and organic connectors. They are formed by complexation reactions and exhibit characteristics of both polymers and coordination compounds. They exhibit numerous advantageous features, including a large specific surface area, adjustable pore size/shape, and modifiable pore wall functional groups. Consequently, MOFs have been extensively applied in the photocatalytic reduction of carbon dioxide (CO2). Despite considerable research on cobalt-based MOFs, the photocatalytic reduction of CO2 in the presence of these materials remains challenging. The present review summarizes the current studies concerning the utilization of cobalt-based MOFs in the photocatalytic reduction of CO2. Additionally, approaches used to enhance the catalytic reduction performance are evaluated and the challenges associated with Co-based MOFs are discussed.

Adsorption of REEs from Aqueous Solution by EDTA-Chitosan Modified with Zeolite Imidazole Framework (ZIF-8)

Chitosan (CS) modified with ethylenediamine tetraacetic acid (EDTA) was further modified with the zeolite imidazole framework (ZIF-8) by in situ growth method and was employed as adsorbent for the removal of rare-earth elements (REEs). The material (EDTA-CS@ZIF-8) and ZIF-8 and CS were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), and nitrogen adsorption/desorption experiments (N2- Brunauer-Emmet-Teller (BET)). The effects of adsorbent dosage, temperature, the pH of the aqueous solution, contact time on the adsorption of REEs (La(III), Eu(III), and Yb(III)) by EDTA-CS@ZIF-8 were studied. Typical adsorption isotherms (Langmuir, Freundlich, and Dubinin-Radushkevich (D-R)) were determined for the adsorption process, and the maximal adsorption capacity was estimated as 256.4 mg g-1 for La(III), 270.3 mg g-1 for Eu(III), and 294.1 mg g-1 for Yb(III). The adsorption kinetics results were consistent with the pseudo-second-order equation, indicating that the adsorption process was mainly chemical adsorption. The influence of competing ions on REE adsorption was also investigated. After multiple cycles of adsorption/desorption behavior, EDTA-CS@ZIF-8 still maintained high adsorption capacity for REEs. As a result, EDTA-CS@ZIF-8 possessed good adsorption properties such as stability and reusability, which have potential application in wastewater treatment.