Is minimally invasive plating osteosynthesis for humeral shaft fracture advantageous compared with the conventional open technique?

Combining robotics and 3D printing facilitates closed reduction of humeral shaft fractures using a minimally invasive plate as a reduction template: A proof-of-concept study

BACKGROUND

Minimally invasive percutaneous plate osteosynthesis for humeral shaft fractures (HSFs) has limitations due to malreduction and radiation exposure. To address these limitations, we integrated robotics and 3D printing by incorporating plates as reduction templates.

METHOD

The innovative technology facilitated closed reduction of HSFs in the operating theatre using 18 models with cortical marking holes. The dataset of the precontoured plate was imported into 3D planning software for virtual fixation and screw path planning. The models were divided into half to simulate transverse fractures. During the operation, the software generated drilling trajectories for robot navigation, and precise plate installation achieved automatic fracture reduction.

RESULTS

The evaluation results of reduction accuracy revealed variations in length, apposition, alignment, and rotation that meet the criteria for anatomic reduction. High interoperator reliabilities were observed for all parameters.

CONCLUSIONS

The proposed technology achieved anatomic reduction in simulated bones.

HUMERAL SHAFT FRACTURE WITH AN INTACT WEDGE FRAGMENT: MIPO VS CONVENTIONAL PLATING

Objectives

Evaluate bone healing time, consolidation, and the complication rate between the minimally invasive plate osteosynthesis and open reduction with plate osteosynthesis in humeral diaphyseal fractures with an intact wedge (AO 12B2).

Methods

A retrospective study was carried out between 2016 and 2020. The medical records and radiographs of 18 patients were analyzed, and data were collected regarding the time of consolidation, age, sex, plate size, number of screws, complications such as iatrogenic injury damage to the radial nerve, material failure, and postoperative infection.

Results

No statistically significant differences were observed in the variables of age, sex, plate size, and number of screws used or in the RUSHU index (Radiographic Union Score for Humeral fractures). There were no postoperative infections, material failure, or need for reoperation, nor cases of secondary radial nerve injury. After one year, all patients had a consolidation index analyzed by RUSHU >11.

Conclusion

both techniques showed similar results, with a high consolidation rate and low rates of complications or iatrogenic damage to the radial nerve. Evidence level III; Retrospective comparative study .

Humeral shaft fracture: systematic review of non-operative and operative treatment

INTRODUCTION

Humeral shaft fractures can be treated non-operatively or operatively. The optimal management is subject to debate. The aim was to compare non-operative and operative treatment of a humeral shaft fracture in terms of fracture healing, complications, and functional outcome.

METHODS

Databases of Embase, Medline ALL, Web-of-Science Core Collection, and the Cochrane Central Register of Controlled Trials (CENTRAL) were systematically searched for publications reporting clinical and functional outcomes of humeral shaft fractures after non-operative treatment with a functional brace or operative treatment by intramedullary nailing (IMN; antegrade or retrograde) or plate osteosynthesis (open plating or minimally invasive). A pooled analysis of the results was performed using MedCalc.

RESULTS

A total of 173 studies, describing 11,868 patients, were included. The fracture healing rate for the non-operative group was 89% (95% confidence interval (CI) 84-92%), 94% (95% CI 92-95%) for the IMN group and 96% (95% CI 95-97%) for the plating group. The rate of secondary radial nerve palsies was 1% in patients treated non-operatively, 3% in the IMN, and 6% in the plating group. Intraoperative complications and implant failures occurred more frequently in the IMN group than in the plating group. The DASH score was the lowest (7/100; 95% CI 1-13) in the minimally invasive plate osteosynthesis group. The Constant-Murley and UCLA shoulder score were the highest [93/100 (95% CI 92-95) and 33/35 (95% CI 32-33), respectively] in the plating group.

CONCLUSION

This study suggests that even though all treatment modalities result in satisfactory outcomes, operative treatment is associated with the most favorable results. Disregarding secondary radial nerve palsy, specifically plate osteosynthesis seems to result in the highest fracture healing rates, least complications, and best functional outcomes compared with the other treatment modalities.

Radiographic rotational profiles of the proximal and distal humerus: analysis of 46 computed tomography scans with 3-dimensional simulation

BACKGROUND

To date, no study has investigated the radiographic rotational profiles (RRPs) of the proximal and distal humerus. However, malrotation after minimally invasive surgery for humeral fracture has been an unsolved problem. Therefore, we aimed to investigate the RRPs of the proximal and distal humerus that linearly correlate with rotational status and show significant differences as the rotational status changes.

METHODS

Forty-six computed tomography scans of the humerus were 3-dimensionally reconstructed, and 5 rotational statuses (20° and 10° of internal rotation; neutral; and 10° and 20° of external rotation) were simulated. Seven candidate RRPs of the proximal humerus and 4 candidates of the distal humerus were measured for each rotational status. The overall differences and trends in the RRPs as the rotational status changed were evaluated, and multiple comparisons were performed between the RRPs for each of the 5 rotational statuses. Moreover, the correlations between the RRPs and rotational status with adjustment of retroversion were analyzed. Finally, interobserver and intraobserver reliabilities were evaluated.

RESULTS

The following proximal and distal RRPs were linearly correlated with rotational status, differed significantly between the rotational statuses, and showed a relatively low prediction error and excellent interobserver and intraobserver reliabilities: the distance from the tip of the lesser tuberosity to the lateral margin of the proximal humerus (P_L1) and the medial margin of the head (P_L2), as well as the P_L1 to P_L2 ratio (PR_L), in the proximal humerus; and the distance from the medial margin of the olecranon process to the medial epicondyle (D_OP), the widest width of the overlapped olecranon fossa (D_OF), and the distance from the lateral margin of the capitellum to the lateral epicondyle (D_C) in the distal humerus.

CONCLUSION

Our findings suggest that P_L1, P_L2, and PR_L in the proximal humerus and D_OP, D_OF, and D_C in the distal humerus are potentially useful and reproducible RRPs for restoring the intrinsic rotational alignment in humeral fractures.

Humeral shaft fractures: a cost-effectiveness analysis of operative versus nonoperative management

BACKGROUND

Humeral shaft fractures can be managed operatively or nonoperatively with functional bracing in the absence of neurovascular injury, open fracture, or polytrauma. A consensus on optimal management has not been reached, nor has the cost-effectiveness perspective been investigated.

METHODS

A decision tree was constructed describing the management of humeral shaft fractures with open reduction-internal fixation (ORIF), intramedullary nailing (IMN), and functional bracing in a non-elderly population. Probabilities were defined using weighted averages determined from systematic review of the literature. Cost-effectiveness was evaluated with incremental cost-effectiveness ratios, measured in cost per quality-adjusted life-year (QALY). Willingness-to-pay thresholds of $50,000/QALY and $100,000/QALY were evaluated.

RESULTS

Eighty-six studies were included. Using bracing as the referent in the health care model, we observed that bracing was the preferred strategy at both incremental cost-effectiveness ratio thresholds. ORIF and IMN had higher overall effectiveness (0.917 QALYs and 0.913 QALYs, respectively) compared with bracing (0.877 QALYs). The cost-effectiveness of bracing was driven by a substantially lower overall cost. In the societal model-accounting for both health care and societal costs-the cost difference narrowed between bracing, ORIF, and IMN. Bracing remained the preferred strategy at the $50,000/QALY threshold; ORIF was preferred at the $100,000/QALY threshold. ORIF and IMN were comparable strategies across a range of probability values in sensitivity analyses.

CONCLUSIONS

Functional bracing, with its low cost and satisfactory clinical outcomes, is often the most cost-effective strategy for humeral shaft fracture management. ORIF becomes preferable at the higher willingness-to-pay threshold when societal burden is considered. QALY values for ORIF and IMN were comparable.

A finite element model of the shoulder: application to the changes of biomechanical environment induced by postoperative malrotation of humeral shaft fracture

Objectives

The humerus fracture is one of the most commonly occurring fractures. In this research, we attempted to evaluate and compare the extent of malrotation and biomechanical environment after surgical treatment of humeral shaft fractures.

Methods

A finite element (FE) model of the shoulder was built based on Computed Tomography (CT) data of a patient with a humeral shaft fracture. The muscle group around the shoulder joint was simulated by spring elements. The changes of shoulder stresses under rotation were analyzed. The biomechanics of the normal shoulder and postoperative malrotation of the humeral shaft was analyzed and compared.

Results

During rotations, the maximum stress was centered in the posterosuperior part of the glenoid for the normal shoulder. The von Mises shear stresses were 4.40 MPa and 4.89 MPa at 40° of internal and external rotations, respectively. For internal rotation deformity, the shear contact forces were 7–9 times higher for the shoulder internally rotated 40° than for the normal one. For external rotation deformity, the shear contact forces were about 3–5 times higher for the shoulder with 40° external rotation than the normal one.

Conclusion

Postoperative malrotation of humeral shaft fracture induced the changes of the biomechanical environment of the shoulders. The peak degree of malrotation was correlated with increased stresses of shoulders, which could be paid attention to in humeral shaft fracture treatment. We hoped to provide information about the biomechanical environment of humeral malrotation.

Minimally invasive plate osteosynthesis of the humeral shaft with regard to adjacent anatomical characteristics

The study goal was to evaluate the distances from the radial (RN), the musculocutaneous (MN) and axillary nerves (AN) and the medial neurovascular bundle of the upper arm to a minimally invasive applied plate and to define its relation to the RN during different degrees of malrotation during MIPO. The sample involved ten upper extremities. Application of a PHILOS plate was performed through a Delta-split. Intervals between the AN, MN, RN and the medial vascular bundle were defined at various positions. The humeral shaft was artificially fractured at a height of about the mean of the plate. The distal fragment was brought into 15° and 30° internal (IR) as well as external rotation (ER) and here, the plate’s relation to the RN was evaluated. The medial neurovascular bundle intersected the plate at its distal part in two specimens. Regarding the distances from the RN to the plate during different rotation positions the distances became significantly longer during ER, respectively shorter during IR. The medial neurovascular bundle and the RN were identified as the main structures at risk. Care must be taken during distal screw placement and malrotation exceeding 15° must be avoided during MIPO.

Postoperative malrotation of humerus shaft fracture causes degeneration of rotator cuff and cartilage

We hypothesized that postoperative malrotation of humeral shaft fractures can alter the bio-mechanical environment of the shoulder; thus, rotator cuff and cartilage degeneration could be induced. Therefore, we designed an animal experiment to evaluate the impact of malrotation deformities after minimally invasive surgery for humeral fractures on the rotator cuff and cartilage, which has rarely been described in previous studies. Twenty-four New Zealand white rabbits were randomly divided into the sham control group (A), negative control group (B) and malrotated group (C). A sham operation with surgical exposure alone was performed in group A. Humeral shaft osteotomy was performed in Group B and C. In Group B, the fractures were fixed in situ with plate -screw system. While in Group C, iatrogenic rotational deformity was created after the proximal end of the fracture being internally rotated by 20 degrees and then subsequently fixed. The animals with bone healing were sacrificed for pathological and biochemical examination. In group C, the modified Mankin scale for cartilage pathology evaluation and the modified Movin scale for tendon both showed highest score among groups with statistical significance (P < 0.05); Disordered alignment and proportion of collagen I/III of rotator cuff were confirmed with picrosirius red staining; Transmission electron microscopy also showed ultrastructural tendon damage. Immunohistochemistry showed that both MMP-1 and MMP-13 expression were significantly higher in group C than groups A and B(P < 0.05). Minimally invasive techniques for humerus shaft fracture might be cosmetically advantageous, but the consequent postoperative malrotation could increase the risk of rotator cuff and cartilage degeneration. This conclusion is supported here by primary evidence from animal experiments.

A virtual reality simulator for training the surgical reduction of patient-specific supracondylar humerus fractures

PURPOSE

Virtual reality has been used as a training platform in medicine, allowing the repetition of a situation/scenario as many times as needed and making it patient-specific prior to an operation. Of special interest is the minimally invasive plate osteosynthesis (MIPO). It represents a novel technique for orthopedic trauma surgery, but requires intensive training to acquire the required skills. In this paper, we propose a virtual reality platform for training the surgical reduction of supracondylar fractures of the humerus using MIPO. The system presents a detailed surgical theater where the surgeon has to place the bone fragments properly.

METHODS

Seven experienced users were selected to perform a surgical reduction using our proposal. Two paired humeri were scanned from a dataset obtained from the Complejo Hospitalario de Jaén. A virtual fracture was performed in one side of the pair, using the other as contralateral part. Users have to simulate a reduction for each case and fill out a survey about usability, using a five-option Likert scale.

RESULTS

The subjects have obtained excellent scores in both simulations. The users have notably reduced the time employed in the second experiment, being 60% less in average. Subjects have valued the usability (5.0), the intuitiveness (4.6), comfort (4.5), and realism (4.9) in a 1-5 Likert scale. The mean score of the usability survey was 4.66.

CONCLUSION

The system has shown a high learning rate, and it is expected that the trainees will reach an expert level after additional runs. By focusing on the movement of bone fragments, specialists acquire motor skills to avoid the malrotation of MIPO-treated fractures. A future study can fulfill the requirements needed to include this training system into the protocol of real surgeries. Therefore, we expect the system to increase the confidence of the trainees as well as to improve their decision making.

Anterior Minimally Invasive Plate Osteosynthesis for Humeral Shaft Fractures Is Safer Than Open Reduction Internal Fixation: A Matched Case-Controlled Comparison

OBJECTIVE

Compare anterior minimally invasive plate osteosynthesis (MIPO) to open reduction/internal fixation (ORIF) for humeral shaft fractures, assessing complications and clinical outcomes.

DESIGN

Retrospective matched case-controlled cohort.

SETTING

Tertiary referral trauma centre.

PATIENTS/PARTICIPANTS

Humeral shaft fractures identified retrospectively over 5 years; 31 were treated by MIPO and 54 by ORIF. Matched-case cohort assembled according to fracture pattern, sex, age, and comorbidities, with 56 total patients (28 per group).

INTERVENTIONS

MIPO and ORIF.

MAIN OUTCOME MEASURES

Complication rate was the primary outcome (radial nerve injury, nonunion, infection, and reoperation). Radiographic alignment and the Disabilities of the Arm, Shoulder and Hand Score were secondary outcomes.

RESULTS

Cumulative complication rates were 3.6% after anterior MIPO and 35.7% after ORIF (P = 0.0004). The only complication after anterior MIPO was a nonunion, managed with revision ORIF and bone graft. The ORIF group had 10 complications, including 5 superficial infections, 4 iatrogenic radial nerve injuries, and 1 nonunion. The mean Disabilities of the Arm, Shoulder and Hand score after MIPO was 17.0 ± 18.0 and after ORIF was 24.9 ± 19.5. The mean coronal plane angulation after MIPO was 1.8 ± 1.3 degrees and after ORIF was 1.0 ± 1.2 degrees. The mean sagittal plane angulation after MIPO was 3.0 ± 2.9 degrees and after ORIF was 1.0 ± 1.2 degrees.

CONCLUSIONS

The cumulative complication rate was 10 times higher after ORIF of humeral shaft fractures compared with the MIPO technique. MIPO achieved nearly equivalent radiographic alignment, with no clinically meaningful differences observed. MIPO is the safer option and should be considered for patients with humeral shaft fractures that would benefit from surgical intervention.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Is Minimally Invasive Plating Osteosynthesis Better Than Conventional Open Plating for Humeral Shaft Fractures? A Systematic Review and Meta-Analysis of Comparative Studies

INTRODUCTION

The aim of systematic review and meta-analysis was to find out whether minimally invasive plate osteosynthesis (MIPO) is better than open reduction and internal plate fixation (ORIF) in terms of functional outcome, achieving union (union time and incidence of non-union), intraoperative parameters (surgical duration, blood loss, and radiation exposure), and complications (iatrogenic radial nerve palsy and infection) for humeral shaft fractures.

MATERIALS AND METHODS

We searched online databases (Pubmed, Embase, Scopus, and The Cochrane Library) from inception till 3rd September 2020 for articles comparing MIPO with ORIF for humeral shaft fractures. The methodological quality of randomized controlled trials (RCTs) was done by Cochrane Risk of Bias assessment tool 2 (RoB2) and of non-randomized studies (case-control and cohort studies) by Methodological Index for non-randomized studies (MINORS). Meta-analysis was performed using Review Manager 5.4 software.

RESULTS

11 studies (5 RCTs and 6 non-randomized comparative studies) involving a total of 582 patients (MIPO-290, ORIF-292) meeting our inclusion criteria were included in the study. There was no statistically significant difference in pooled analysis of functional outcome scores between MIPO and ORIF. Union time was significantly lesser (mean difference = 3.12 weeks) and incidence of non-union lower (odd's ratio = 0.27) in MIPO group. Surgical duration and intraoperative blood loss were significantly lesser in MIPO group. Iatrogenic radial nerve palsy and infection were higher in ORIF group.

CONCLUSIONS

This study showed that MIPO gives similar functional outcomes as compared to ORIF but causes significantly lesser blood loss, requires lesser operative duration and has a lesser incidence of major complications.

TRIAL REGISTRATION

International prospective register of systematic reviews (PROSPERO)-CRD42020208346, Date of registration 09/10/2020.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s43465-021-00413-6.

ORIF versus MIPO for humeral shaft fractures: a meta-analysis and systematic review of randomized clinical trials and observational studies

BACKGROUND

There is no consensus on the optimal operative technique for humeral shaft fractures. This meta-analysis aims to compare minimal-invasive plate osteosynthesis (MIPO) with open reduction internal fixation (ORIF) for humeral shaft fractures regarding non-union, re-intervention, radial nerve palsy, time to union, operation duration and functional outcomes.

METHODS

PubMed/Medline/Embase/CENTRAL/CINAHL were searched for both randomized clinical trials (RCT) and observational studies comparing MIPO with ORIF for humeral shaft fractures. Effect estimates were pooled across studies using random effects models and presented as weighted odds ratio (OR), risk difference (RD), mean difference (MD) and standardized mean difference (SMD) with corresponding 95% confidence interval (95%CI). Subgroup analysis was performed stratified by study design (RCTs and observational studies).

RESULTS

A total of two RCT's (98 patients) and seven observational studies (263 patients) were included. The effect estimates obtained from observational studies and RCT's were similar in direction and magnitude. MIPO carries a lower risk for non-union (RD: 5%; OR 0.3, 95% CI 0.1-0.9) and secondary radial nerve palsy (RD 5%; OR 0.3, 95%CI 0.1- 0.9). Nerve function eventually restored spontaneously in all patients in both groups. Results were inconclusive regarding re-intervention (RD 7%; OR: 0.7, 95%CI 0.2-1.9), infection (RD 4%; OR 0.4, 95%CI 0.1-1.5), time to union (MD -1 week, 95%CI -3 - 1) and operation duration (MD -13 minutes, 95%CI -38.9 - 11.9). Functional shoulder scores (SMD 0.01, 95%CI -0.3 - 0.3) and elbow scores (SMD 0.01, 95%CI -0.3 - 0.3) were similar for the different operative techniques.

CONCLUSION

MIPO has a lower risk for non-union than ORIF for the treatment of humeral shaft fractures. Radial nerve palsy secondary to operation is a temporary issue resolving in all patients in both treatment groups. Although both treatment options are viable, the general balance leans towards MIPO having more favorable outcomes.

Time until union in absolute vs. relative stability MIPO plating in simple humeral shaft fractures

PURPOSE

The objective of this study is to evaluate the effect of absolute stability (AS) versus relative stability (RS) performed through a minimally invasive plate osteosynthesis (MIPO) in AO/OTA 12A1 and 12A2 fractures on healing and the time to radiographic union.

METHODS

This was a retrospective cohort study of all patients treated with plate fixation for AO/OTA type 12A1-A2 fractures at a single institution. Patients were grouped according to the type of stability used in their surgery. Time until radiographic union was estimated using the Kaplan-Meier method, which was compared by long-rank test between both types of surgical techniques.

RESULTS

A total of 70 patients were included in this study with 35 patients in each group. The median follow-up was 9 (IQR 6-14) months. The median time to radiographic union was significantly lower in the AS group than in the RS group: 12 (interquartile range (IQR) 10-14) weeks versus 18 (IQR 16-19) weeks, respectively (p < 0.001). Non-union was seen in two cases (7%) in the relative stability group. Three patients in the RS group developed a post-operative radial nerve palsy.

CONCLUSION

The main finding of this study is that the median time to radiographic union was significantly shorter in the patients treated with AS compared to those with a RS technique. These findings support the recommendations of the AO foundation in that simple metaphyseal fractures (type A) that require surgical treatment should be treated with an AS construct. RS techniques should be reserved to multifragmentary fractures where fragment preservation of blood supply is paramount.

Comparison between osteosynthesis with interlocking nail and minimally invasive plating for proximal- and middle-thirds of humeral shaft fractures

PURPOSE

Options for the treatment of proximal- and middle-thirds of humeral shaft fractures include intramedullary interlocking nail (IMN) and minimally invasive plate osteosynthesis (MIPO). However, whether IMN provides better clinical outcomes than MIPO surgical technique still remains unclear. This study was designed to compare clinical outcomes of the IMN with MIPO technique for the treatment of proximal- and middle-thirds of humeral shaft fractures.

METHOD

A retrospective cohort analysis of 55 proximal- and middle-thirds of humeral shaft fractures surgically treated using IMN (n = 25) or MIPO (n = 30) from January 2012 to January 2016. Peri-operative and follow-up data (a minimum of 1 year) of the patients (aged from 18 to 56 years) were collected. Operative time, union time, VAS scores, surgery-related complications, and implant removal rate were compared between the two groups in this study. Besides, the functional outcomes were evaluated using the Rating Scale of American Shoulder and Elbow Surgeons' Form (ASES) and Mayo Elbow Performance Score System (MEPS).

RESULT

We found significantly shorter operative time and much less blood loss in IMN group, and lower VAS scores in the IMN group after surgery at first and third months but not at the sixth month. Complication rate was found to be relatively higher in the MIPO group when compared to the IMN group. No significant difference was observed between these two groups regarding ASES and MEPS scores. Three patients in the MIPO group suffered iatrogenic radial nerve injury and recovered after four to five months later. No implant failures occurred in either group.

CONCLUSION

Intramedullary interlocking nail seemed to be superior to minimally invasive plate osteosynthesis in the treatment of proximal- and middle-thirds of humeral shaft fractures due to shorter operative time and union time, less early post-operative pain, and fewer complications. The intramedullary interlocking nail could be considered a better surgical option for the management of proximal middle humeral fractures, though it may also depend on the surgeons' skills and learning curve. Further in-depth prospective studies are in great need to verify our conclusion.

Anterior minimally invasive plating osteosynthesis technique (MIPO) for humeral shaft fractures: an anatomical study of neuromuscular structures at risk

OBJECTIVE

The aim of this study was to evaluate the neuromuscular structures at risk during modified anterior minimally invasive plating osteosynthesis technique (Belangero-Livani) for humeral shaft fractures.

METHODS

Eight fresh-frozen human specimens ranging from 38 to 82 years old were used. Specimens were positioned supine with the shoulder in 70° abduction and the forearm in full supination. Anterior minimally invasive plating osteosynthesis technique according to Belangero-Livani technique was performed in each specimen. Under radioscopic control, the plate was introduced in retrograde fashion through the subbrachialis path. Anatomical structures were inspected and different anatomical parameters were measured after dissection at the end of the surgical procedures. Measurements were performed using a high digital caliper. Statistical analysis was performed using the Pearson's correlation coefficient test. A p value of < 0.05 was used to define statistical significance.

RESULTS

There were no macroscopic lesions of myotendinous or neurovascular structures in any specimen. The mean distance between the radial nerve to the distal lateral end of the plate was 8.63 mm (range 4.14-13.83 mm). The mean total length of the humerus was 328.59 mm. We found a significant direct correlation between the total length of the humerus and both specimen height and weight.

CONCLUSION

The modified Belangero-Livani anterior MIPO technique for humeral shaft fractures performed in retrograde fashion is safe and useful, without major risk to the soft tissue of the anterior compartment of the arm, including the radial nerve in the lateral intermuscular septum. Intraoperative dissection, avoiding deep lateral retraction on the distal approach, minimizes the risk of radial nerve damage. Strict surgical planning and appreciation for the anatomic landmarks can reduce the risk of damage to neuromuscular structures.

LEVEL OF EVIDENCE

Level IV; Case series with no comparison group; Treatment study.

Comparison of the Posterior and Anterolateral Surgical Approaches in the Treatment of Humeral Mid-Shaft Fractures: A Retrospective Study

Background

The aim of this study was to retrospectively assess and compare the functional outcomes and complications following anterolateral versus posterior surgical approaches for the treatment of mid-shaft fractures of the humerus.

Material/Methods

This study included 107 patients treated for mid-shaft fractures between May 2015 and July 2018. Demographic and surgical data were collected for each patient. During follow-up visits, radiographs were acquired and evaluated. The clinical outcomes of the involved joints were assessed by the Constant scoring system, range of motion (ROM), and the Mayo Elbow Performance Scoring system at the 12-month follow-up.

Results

The posterior approach was performed in 57 patients with type A fractures (group I, n=28) and type B or C fractures (group III, n=29). The anterolateral approach was performed in 50 patients with type A fractures (group II, n=32) and type B or C fractures (group IV, n=18). There were no significant differences between group I and group II nor between group III and group IV with respect to patient demographic data, surgical data, Constant score, ROM, or Mayo Elbow Performance score. A significant difference in the total complication rate was observed between group I and II.

Conclusions

The anterolateral approach showed an advantage over the posterior approach for treating simple humeral mid-shaft fractures. However, this advantage was not observed in treating comminuted fractures.

Automatic detection of landmarks for the analysis of a reduction of supracondylar fractures of the humerus

An accurate identification of bone features is required by modern orthopedics to improve patient recovery. The analysis of landmarks enables the planning of a fracture reduction surgery, designing prostheses or fixation devices, and showing deformities accurately. The recognition of these features was previously performed manually. However, this long and tedious process provided insufficient accuracy. In this paper, we propose a geometrically-based algorithm that automatically detects the most significant landmarks of a humerus. By employing contralateral images of the upper limb, a side-to-side study of the landmarks is also conducted to analyze the goodness of supracondylar fracture reductions. We conclude that a reduction can be classified by only considering the detected landmarks. In addition, our technique does not require a prior training, thus becoming a reliable alternative to treat this kind of fractures.

Geometrical analysis for assessing torsional alignment of humerus

BACKGROUND

Compared to other types of surgeries, minimally invasive surgeries (MISs) of humeral shaft fractures are associated with less radial nerve injury, less soft tissue injury and higher union rate. However, malrotation often occurs in MISs when closed reduction methods are used. This study aims to define specific palpable landmarks to help surgeons determine the correct torsional angle and reduce the incidence of malrotation.

METHODS

Twenty-eight normal humeral computed tomography scans were retrieved from our image database. One line was drawn through the vertices of the intertubercular sulcus of the humeral head in the coronal view, and another line was drawn through the longest axis between the medial and lateral condyles in the coronal view. The angle between these two lines was measured at least 3 times for each scan.

RESULTS

The profile of the intertubercular sulcus tangent line of the humeral head and the axis of the distal humerus was identified as the most accurate method for assessing the precision of torsion during MIS for humeral shaft fractures. The transepicondylar axis line is more internally rotated than the intertubercular sulcus tangent line. The mean angle was measured to be 41.1 degrees.

CONCLUSIONS

The axis of the distal humeral condyles is internally rotated by approximately 41.1 degrees compared with the intertubercular sulcus tangent line of the humeral head. Minimally invasive surgeries can be performed by using these palpable landmarks. The torsional deformities can be reduced with the proper angle adjustment without the need for fluoroscopy. It can also be used to treat unstable comminuted humeral fractures.

LEVEL OF EVIDENCE

Retrospective Study, Diagnostic study, Level III.

Open reduction and internal fixation of humeral midshaft fractures: anterior versus posterior plate fixation

Background

Fractures of the humeral shaft represent 2–4% of all fractures. Fractures of the humerus have traditionally been approached posteriorly for open reduction and internal fixation. Reports of treating midshaft fractures with an open anterolateral approach and anterior plating are limited. The purpose of this study was to evaluate a series of humeral shaft fractures treated with plate osteosynthesis regarding the effect of the approach and plate location on the healing rate and occurrence of complications.

Methods

We conducted a retrospective chart review of patients aged over 18 years with humeral midshaft fractures treated with anterior or posterior plate fixation. Selection of the approach to the humerus was based on the particular pattern of injury and soft tissue involvement. The minimum follow-up duration was set at six months. The outcomes included the rate of union, primary nerve palsy recovery, secondary nerve damage, infection and revision surgery.

Results

Between 2006 and 2014, 58 patients (mean age, 59.9; range, 19–97 years) with humeral midshaft fractures were treated with anterior (n = 33) or posterior (n = 25) plate fixation. After a mean follow-up duration of 34 months, 57 of 58 fractures achieved union after index procedure. Twelve fractures were associated with primary radial nerve palsy. Ten of the twelve patients with primary radial palsy recovered completely within six months after the index surgery. In total, one patient developed secondary palsy after anterior plating, and three patients developed secondary palsy after posterior plating. No significant difference in the healing rate (p = 0.4), primary nerve palsy recovery rate (p = 0.6) or prevalence of secondary nerve palsy (p = 0.4) was found between the two clinical groups. No cases of infection after plate fixation were documented.

Conclusions

Open reduction and internal fixation using an anterior approach with plate fixation provides a safe alternative to posterior plating in the treatment of humeral shaft fractures. An anterior approach allows supine positioning of the patient and yields union and complication rates comparable to those of a posterior approach with plate fixation for the treatment of humeral shaft fractures.

Minimally Invasive Plate Osteosynthesis of Humeral Shaft Fractures: Current State of the Art

Most closed humeral shaft fractures can be successfully managed nonsurgically. However, fractures for which closed treatment is unsuccessful are stabilized using either plates or intramedullary nails. There are shortcomings associated with each technique, including the potential complications of nonunion, infection, shoulder pain, and radial nerve injury. Minimally invasive plate osteosynthesis (MIPO), an innovative alternative treatment, is gaining in popularity. This technique is based on the anterior humeral shaft providing a relatively safe surface for plate application, and limited open exposures proximally and distally allow percutaneous insertion of the necessary implant. More than 40 articles have been published regarding MIPO, and it compares favorably to other available forms of treatment with excellent functional outcomes and a lower rate of iatrogenic radial nerve injury. Larger randomized controlled trials comparing this method with other accepted techniques, including nonsurgical management, are necessary to better define the role of MIPO in the management of humeral shaft fractures.

Lateral Subcutaneous Locking Compression Plate and Small Incision Reduction for Distal-third Diaphyseal Humerus Fractures

Objective

Iatrogenic radial nerve injury is a great challenge for orthopaedic surgeons who deal with distal‐third diaphyseal humerus fractures. Conventional open reduction and internal fixation (ORIF) remains the gold standard, but complications such as nonunion and iatrogenic radial nerve injury still occur. We fixed the fractures with a lateral locking compression plate (LCP) subcutaneously after small incision reduction to protect the radial nerve. This study reports the clinical and radiographic outcomes of our modified method.

Methods

Thirty‐eight patients with distal‐third diaphyseal humerus fractures were treated with lateral subcutaneous LCP and small incision reduction at our department between September 2013 and August 2016. There were 33 males and 5 females, with an average age of 30.3 years (range, 17 to 49 years). All the cases were types A or B (AO/OTA classification, type A, 24 cases; type B, 14 cases). Among them, 6 cases were combined with preoperative radial nerve palsy. All patients were diagnosed with closed humeral fractures after X‐ray examination, and had typical upper limb pain, swelling, and movement disorders. The operations were performed by a single surgeons’ team. Union time, range of motion (ROM), University of California, Los Angeles (UCLA) shoulder rating scale, and Mayo Elbow Performance Index (MEPI) scores were assessed to evaluate the postoperative results.

Results

All patients were followed up for an average of 11.4 months (range, 3 to 36 months). The average operation time was 75.5 min (range, 60 to 150 min) and average intraoperative radiation exposure was 10.5 s (range, 8 to 18 s). Bony union was achieved in all cases after an average of 16.2 weeks (range, 12 to 25 weeks). No complications such as infection or screw and plate fracture occurred, and no iatrogenic radial nerve injury was observed. According to the UCLA shoulder rating scale, the average score was 33.7 (range, 31 to 35), with 33 excellent (86.8%) and 5 good cases (13.2%). They were all excellent according to their MEPI scores (ranging, 94 to 100, with an average of 97.4). The average operation time for secondary removal of the plate was 15.2 min (range, 10 to 20 min), and no complications such as infection or secondary radial nerve injury occurred.

Conclusions

Lateral subcutaneous LCP and small incision reduction may reduce the risk of iatrogenic radial nerve injury significantly in the treatment of distal‐third diaphyseal humerus fractures. It also leads to solid fixation, good postoperative function, and convenient removal of the plate without injuring the radial nerve.

Evaluation of the surgical treatment of humeral shaft fractures and comparison between surgical fixation methods

OBJECTIVE

The objective of this study is to analyze the surgical results of humeral shaft fracture treatment and describe its epidemiology.

METHODS

Retrospective study that identified all patients treated with surgical fixation of humeral shaft fractures between December of 2014 and June of 2016 in a trauma reference center. All medical records were reviewed in search of epidemiological data referent to the trauma and post-operative results, including radiographic healing of the fracture and related complications.

RESULTS

Fifty-one patients were included, mostly male (78.4%), with an average age of 35.02 years. The most common trauma mechanism was a traffic accident (56.9%) followed by same-level falls (17.6%). No statistically significant difference was found between healing time comparing surgical fixation techniques, including open reduction and internal fixation, minimally invasive technique, intramedullary nailing, and external fixation.

CONCLUSION

Although each technique has inherent advantages and disadvantages, all fixation methods proved to be adequate options for the surgical treatment of humeral shaft fractures with high rates of healing and low rates of post-operative complications.

Comparison between antegrade intramedullary nailing (IMN), open reduction plate osteosynthesis (ORPO) and minimally invasive plate osteosynthesis (MIPO) in treatment of humerus diaphyseal fractures

INTRODUCTION

The three currently used methods of treatment: namely open reduction plate osteosynthesis (ORPO), Minimally invasive plate osteosynthesis (MIPO), antegrade intramedullary nailing(IMN) are all reported as satisfactory procedures for treatment of humeral shaft fractures. However none of the published reports have a comparison of superiority of one procedure over the other. We evaluated the clinical, radiological and functional outcome of the three procedures.

MATERIALS AND METHODS

We studied adult patients with humerus shaft fractures over a period of 2 years from May 2014 to May 2016 in a level 1 trauma center. Forty-four were treated with IMN, 34 treated with ORPO, and 34 with MIPO. The null hypothesis tested in this study is that there is no difference between IMN, ORPO, MIPO with respect to union time, surgical time, complication rate, non-union rate and functional outcome. Functional outcome was studied by comparing the UCLA shoulder and MEP scores in the three groups.

RESULTS

112 patients were studied consisting of 83 males and 29 females with mean age of 39 years (range 18-70). IMN group showed early union with mean of 12.73 weeks compared to MIPO (14.45 weeks) and ORPO(13.58 weeks), (p<0.05). MIPO had no events of non-union, as compared to ORPO (5 non-unions) and IMN (10 non-unions), (p=0.04). The range of movement at the shoulder with the UCLA score was significantly better with a score of 32.26 in MIPO as compared to 27.54 in IMN and 28.82 in ORPO (p<0.05). The difference in MEPS score in the three groups was not significant (p=0.31). IMN required a mean of 117.95 minutes intraoperatively as compared to 131 and 150.58 mins in MIPO, ORPO respectively.

CONCLUSION

MIPO is overall better with respect to non-union, functional outcome and complications rate. The surgical time depends on the surgeons' skill and learning curve. Thus considering the advantages and risks involved in the various procedure and surgical acumen, each case should be individualized to have a good outcome. We advocate that MIPO can be safely used as an alternative in treating these fractures.

Biomechanical Study of the Fixation Strength of Anteromedial Plating for Humeral Shaft Fractures

Background:

Open reduction and internal fixation with plate and screws are the gold standard for the surgical treatment of humeral shaft fractures, this study was to compare the mechanical properties of anteromedial, anterolateral, and posterior plating for humeral shaft fractures.

Methods:

A distal third humeral shaft fracture model was constructed using fourth-generation sawbones (#3404, composite bone). A total of 24 sawbones with a distal third humeral shaft fracture was randomly divided into three Groups: A, B, and C (n = 8 in each group) for anteromedial, anterolateral, and posterior plating, respectively. All sawbones were subjected to horizontal torsional fatigue tests, horizontal torsional and axial compressive fatigue tests, four-point bending fatigue tests in anteroposterior (AP) and mediolateral (ML) directions and horizontal torsional destructive tests.

Results:

In the horizontal torsional fatigue tests, the mean torsional angle amplitude in Groups A, B, and C were 6.12°, 6.53°, and 6.81°. In horizontal torsional and axial compressive fatigue tests, the mean torsional angle amplitude in Groups A, B, and C were 5.66°, 5.67°, and 6.36°. The mean plate displacement amplitude was 0.05 mm, 0.08 mm, and 0.10 mm. Group A was smaller than Group C (P < 0.05). In AP four-point bending fatigue tests, the mean plate displacement amplitude was 0.16 mm, 0.13 mm, and 0.20 mm. Group B was smaller than Group C (P < 0.05). In ML four-point bending fatigue tests, the mean plate displacement amplitude were 0.16 mm, 0.19 mm, and 0.17 mm. In horizontal torsional destructive tests, the mean torsional rigidity in Groups A, B, and C was 0.82, 0.75, and 0.76 N·m/deg. The yielding torsional angle was 24.50°, 25.70°, and 23.86°. The mean yielding torque was 18.46, 18.05, and 16.83 N·m, respectively.

Conclusions:

Anteromedial plating was superior to anterolateral or posterior plating in all mechanical tests except in AP four-point bending fatigue tests compared to the anterolateral plating group. We can suggest that anteromedial plating is a clinically safe and effective way for humeral shaft fractures.

Reliability, validity, responsiveness, and minimal important change of the Disabilities of the Arm, Shoulder and Hand and Constant-Murley scores in patients with a humeral shaft fracture

BACKGROUND

The Disabilities of the Arm, Shoulder and Hand (DASH) and Constant-Murley scores are commonly used instruments. The DASH is patient-reported, and the Constant-Murley combines a clinician-reported and a patient-reported part. For patients with a humeral shaft fracture, their validity, reliability, responsiveness, and minimal important change (MIC) have not been published. This study evaluated the measurement properties of these instruments in patients who sustained a humeral shaft fracture.

METHODS

The DASH and Constant-Murley instruments were completed 5 times until 1 year after trauma. Pain score, Short Form 36, and EuroQol-5D were completed for comparison. Internal consistency was determined by the Cronbach α. Construct and longitudinal validity were evaluated by assessing hypotheses about expected Spearman rank correlations in scores and change scores, respectively, between patient-reported outcome measures (sub)scales. The smallest detectable change (SDC) was calculated. The MIC was determined using an anchor-based approach. The presence of floor and ceiling effects was determined.

RESULTS

A total of 140 patients were included. Internal consistency was sufficient for DASH (Cronbach α = 0.96) but was insufficient for Constant-Murley (α = 0.61). Construct and longitudinal validity were sufficient for both patient-reported outcome measures (>75% of correlations hypothesized correctly). The MIC and SDC were 6.7 (95% confidence interval, 5.0-15.8) and 19.0 (standard error of measurement, 6.9), respectively, for DASH and 6.1 (95% CI -6.8 to 17.4) and 17.7 (standard error of measurement, 6.4), respectively, for Constant-Murley.

CONCLUSIONS

The DASH and Constant-Murley are valid instruments for evaluating outcome in patients with a humeral shaft fracture. Reliability was only shown for the DASH, making this the preferred instrument. The observed MIC and SDC values provide a basis for sample size calculations for future research.

Is Anterior Bridge Plating for Mid-Shaft Humeral Fractures a Suitable Option for Patients Predominantly Involved in Overhead Activities? A Functional Outcome Study in Athletes and Manual Laborers

BACKGROUND

To assess the functional and radiological outcomes of minimally invasive anterior bridge plating (ABP) for mid-shaft humerus fractures in patients predominantly involved in overhead activities (athletes and manual laborers).

METHODS

Forty-eight patients fulfilling inclusion criteria were treated with ABP at a level-I trauma center using a 4.5-mm dynamic/locking compression plate and followed for a period of 1 year. Functional outcome was assessed using the Constant, Mayo elbow, and Disabilities of the Arm, Shoulder and Hand (DASH) scores. Range of motion (ROM), subjective strength, and radiographic union were assessed. A general satisfaction questionnaire was also administered.

RESULTS

Most patients achieved excellent functional and radiological outcomes. ROM and strength of the shoulder girdle exhibited clinically nonsignificant loss as compared to the opposite side. The mean time for return to the original activities was 64 days (range, 36 to 182 days) and the mean time for confirmed radiographic union was 45 days (range, 34 to 180 days). The mean Constant, Mayo elbow, DASH scores were 95.73 ± 5.76 (range, 79 to 100), 95.94 ± 6.74 (range, 85 to 100), and 1.56 ± 3.15 (range, 0.0 to 14.0), respectively. The majority of patients (43 patients, 89.6%) who fell in the excellent or very good category according to our questionnaire were extremely satisfied. There were 2 cases (4.17%) of nonunion and 3 patients (6.25%) had to change/modify their original occupation.

CONCLUSIONS

ABP is fundamentally different from traditional open posterior plating or conventional intramedullary nailing. It gives relative stability with union taking place by callus formation, and a longer plate on the tensile surface ensures that the humerus can withstand greater amount of rotational and bending stresses. The minimally invasive nature causes minimal soft tissue damage and, if done correctly, causes no damage to the vital structures in proximity. ABP for mid-shaft humerus fractures in patients predominantly engaged in overhead activities is a safe and effective treatment modality yielding high rates of union, excellent functional recovery, minimal biological disruption, better cosmesis, and superior satisfaction rates.

The triceps-sparing posterior approach to plating humeral shaft fractures results in a high rate of union and low incidence of complications

INTRODUCTION

The optimal treatment of humeral shaft fractures continues to be debated. In the current investigation, we sought to determine the clinical and radiographic outcomes following the plate fixation of humeral shaft fractures utilizing the triceps-sparing posterior approach.

MATERIALS AND METHODS

A retrospective review identified a consecutive series of 66 humeral shaft fractures (OTA 12-A, 12-B, or 12-C) treated with dual plate fixation via a posterior, triceps-sparing approach between 2005 and 2014 by a single surgeon. Demographics, operative reports, clinical follow-up, and preoperative radiographs were reviewed. Postoperative radiographs were assessed for angular deformity and time to union. Range of motion and strength testing were also reviewed.

RESULTS

A total of 66 humeral shaft fractures were reviewed with a mean clinical follow-up of 8.0 months. The mean time to union was 15.6 ± 11.1 weeks, and there was one case of delayed union. Seventeen of 66 (25.8 %) patients presented with a primary radial nerve palsy following injury, and 14 of the 17 (82 %) of the preoperative radial nerve palsies fully resolved at an average of 31 weeks following injury. Two additional patients developed radial nerve palsies postoperatively (3.0 %).

CONCLUSION

This is a large consecutive series of humeral shaft fractures treated with plating through a posterior approach by a single surgeon. The triceps-sparing posterior approach to the humerus results in high union rates and a low incidence of secondary radial nerve palsy.

LEVEL OF EVIDENCE

Level IV, Case Series.

A Bayesian network meta-analysis of three different surgical procedures for the treatment of humeral shaft fractures

BACKGROUND

The optimal surgical procedure for humeral shaft fractures remains a matter of debate. We aimed to establish the optimum procedure by performing a Bayesian network meta-analysis.

METHODS

PubMed, EMBASE, the Cochrane Library, and Medline were searched for both randomized controlled trials and prospective studies of surgical treatment for humeral shaft fractures. The quality of the included studies was assessed according to the Cochrane Collaboration's "Risk of bias".

RESULTS

Seventeen RCTs or prospective studies were included in the meta-analysis. The pooled results showed that the occurrence rate of radial nerve injury was lowest for minimally invasive plate osteosynthesis (MIPO; SUCRA probability, 95.1%), followed by open reduction and plate osteosynthesis (ORPO; SUCRA probability, 29.5%), and was highest for intramedullary nailing (IMN; SUCRA probability, 25.4%). The aggregated results of pairwise meta-analysis showed no significant difference in radial nerve injury rate when comparing ORPO versus IMN (OR, 1.92; 95% CI, 0.96 to 3.86), ORPO versus MIPO (OR, 3.38; 95% CI, 0.80 to 14.31), or IMN versus MIPO (OR, 3.19; 95% CI, 0.48 to 21.28). Regarding the nonunion, SUCRA probabilities were 90.5%, 40.2%, and 19.3% for MIPO, ORPO, and IMN, respectively. The aggregated results of a pairwise meta-analysis also showed no significant difference for ORPO versus IMN (OR, 0.83; 95% CI, 0.41 to 1.69), ORPO versus MIPO (OR, 2.42; 95% CI, 0.45 to 12.95), or IMN versus MIPO (OR, 2.49; 95% CI, 0.35 to 17.64).

CONCLUSION

The current evidence indicates that MIPO is the optimum choice in the treatment of humeral shaft fractures and that ORPO is superior to IMN.

Minimally Invasive Plating Osteosynthesis in the Treatment of Humeral Shaft Fractures: A Meta-Analysis

BACKGROUND

Whether minimally invasive plating osteosynthesis (MIPO) or other operative interventions is superior in the treatment of humeral shaft fractures remains controversial. Therefore, we conducted a meta-analysis to quantitatively compare the clinical outcomes of MIPO and other operative interventions in the treatment of humeral shaft fractures.

METHODS

Pubmed, Embase, and Web of Science were systematically searched to identify all available studies comparing clinical outcomes between patients receiving MIPO and other operative interventions. The weight mean difference (WMD) was pooled to compare the operative time, union time, University of California, Los Angeles (UCLA) score, and Mayo elbow performance index (MEPI).The risk ratio (RR) was pooled to compare the union rate, and incidence of complications. Pooled estimates were calculated by using a fixed-effects model or a randomized-effects model, according to the heterogeneity among studies.

RESULTS

Nine studies were included in this meta-analysis. Our results suggest that both MIPO and other operative interventions can achieve similar union time, UCLA score, MEPI, and union rate. However, MIPO is associated with better outcomes including shorter operation time, and lower incidence of radial nerve injury.

CONCLUSION

Evidence from this meta-analysis demonstrated that, MIPO is effective but safer than other operative interventions in the treatment of humeral shaft fracture. However, due to the potential limitations in this meta-analysis, randomized controlled trials with larger sample sizes using appropriate blinding methods are needed to confirm these findings.

Comparison of minimally invasive plate osteosynthesis and conventional plate osteosynthesis for humeral shaft fracture: A meta-analysis

BACKGROUND

The objective of this meta-analysis was to compare the efficacy and safety of minimally invasive plate osteosynthesis (MIPO) and conventional plate osteosynthesis (CPO) for humeral shaft fracture.

METHODS

Potential academic articles were identified from the Cochrane Library, Medline (1966-2016.3), PubMed (1966-2016.3), Embase (1980-2016.3), and ScienceDirect (1966-2016.3). Gray studies were identified from the references of the included literature. Randomized controlled trials (RCTs) and non-RCT involving MIPO and CPO for humeral shaft fracture were included. Two independent reviewers performed independent data abstraction. I statistic was used to assess heterogeneity. Fixed or random effects model was used for meta-analysis.

RESULTS

Two RCTs and 3 non-RCTs met the inclusion criteria. There was a lower incidence of iatrogenic radial nerve palsy in patients with MIPO (P = 0.006). There was no statistically significant difference in in the risk of developing nonunion, delay union, malformation, screw loosening, infection, operation time, UCLA, and MEPS function score between the 2 groups.

CONCLUSION

MIPO decreased incidence of iatrogenic radial nerve palsy and is an efficacy and safety technique for humeral shaft fracture. Due to the limited quality and data of the evidence currently available, more high-quality RCTs are required.

Minimally invasive plate osteosynthesis vs conventional fixation techniques for surgically treated humeral shaft fractures: a meta-analysis

Background

In this study, we performed a meta-analysis to identify whether minimally invasive plate osteosynthesis (MIPO) was superior to conventional fixation techniques (CFT) for treating humeral shaft fractures.

Methods

A systematic literature search was conducted up to February 2016 in ScienceDirect, Springer, MEDLINE, and PubMed databases for relevant papers that compared the outcomes of MIPO with CFT, such as open reduction with plate osteosynthesis (ORPO) and intramedullary nail (IMN) for treating humeral shaft fractures. Meta-analysis was performed with Review Manager 5.0 software.

Results

According to the search strategy, eight studies that covered 391 patients were enrolled, including four randomized controlled trials (RCTs), two prospective cohort trials, and two retrospective cohort trials. Our meta-analysis did not detect any significant difference between MIPO and CFT (IMN and ORPO) in terms of operative time, fracture union rate, and fracture union time. However, MIPO has a less rate of complications and iatrogenic radial nerve palsy than that of ORPO and higher adjacent joint function scores than those of IMN (p < 0.05).

Conclusions

Based on the present evidence, this meta-analysis suggested that MIPO was a better choice for treating humeral shaft fractures than CFT. However, more high-quality randomized trials are still needed to further confirm this conclusion in the future.