A novel approach to formulation factor of aceclofenac eye drops efficiency evaluation based on physicochemical characteristics of in vitro and in vivo permeation

Exploring Cell-Penetrating Peptides as Penetration Enhancers in Eye Drop Formulations Using a Reconstructed Human Corneal Epithelial Model

Ocular tissues function as biological barriers that hinder drug delivery, depending on the target tissue and route of administration, and must be overcome to achieve the desired therapeutic effect. Penetration enhancers have long been investigated to improve corneal drug penetration via eye drop instillation; however, further development is warranted owing to potential safety concerns. In the present study, we focused on cell-penetrating peptides (CPPs) as a penetration enhancer to address the requirements and explored CPP candidates suitable for corneal drug delivery. Using a reconstructed human corneal epithelial tissue model, LabCyte CORNEA-MODEL24 as an alternative to animal testing that is expected to have higher reproducibility than extracted eyeballs and octa-arginine (R8) as a representative model CPP with simple structure, we investigated the enhancement of 6-carboxyfluorescein (6-FAM) uptake by fluorescence imaging and the potential of eye irritation by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Also, surface plasmon resonance (SPR) evaluated the interaction between R8 and model compounds, suggesting that the stronger interaction could facilitate the corneal uptake of compounds. A comparative screening study of corneal uptake using various CPPs showed that the CPPs other than R8 also have the potential to enhance the corneal uptake of 6-FAM. In particular, penetratin (PNT) showed stronger fluorescence intensity. Through these findings, this manuscript provides beneficial information for the development of a novel corneal penetration enhancer with CPPs. In the future, it is expected that the basic findings with R8 will be verified to be applicable to other CPPs for development as penetration enhancers for eye drop formulation.

Formulation and Evaluation of Moxifloxacin Loaded Bilosomes In-Situ Gel: Optimization to Antibacterial Evaluation

In this study, moxifloxacin (MX)-loaded bilosome (BS) in situ gel was prepared to improve ocular residence time. MX-BSs were prepared using the thin-film hydration method. They were optimized using a Box−Behnken design (BBD) with bile salt (A, sodium deoxycholate), an edge activator (B, Cremophor EL), and a surfactant (C, Span 60) as process variables. Their effects were assessed based on hydrodynamic diameter (Y1), entrapment efficacy (Y2), and polydispersity index (Y3). The optimized formulation (MX-BSop) depicted a low hydrodynamic diameter (192 ± 4 nm) and high entrapment efficiency (76 ± 1%). Further, MX-BSop was successfully transformed into an in situ gel using chitosan and sodium alginate as carriers. The optimized MX-BSop in situ gel (MX-BSop-Ig4) was further evaluated for gelling capacity, clarity, pH, viscosity, in vitro release, bio-adhesiveness, ex vivo permeation, toxicity, and antimicrobial properties. MX-BSop-Ig4 exhibited an optimum viscosity of 65.4 ± 5.3 cps in sol and 287.5 ± 10.5 cps in gel states. The sustained release profile (82 ± 4% in 24 h) was achieved with a Korsmeyer−Peppas kinetic release model (R2 = 0.9466). Significant bio-adhesion (967.9 dyne/cm2) was achieved in tear film. It also exhibited 1.2-fold and 2.8-fold higher permeation than MX-Ig and a pure MX solution, respectively. It did not show any toxicity to the tested tissue, confirmed by corneal hydration (77.3%), cornea histopathology (no internal changes), and a HET-CAM test (zero score). MX-BSop-Ig4 exhibited a significantly (p < 0.05) higher antimicrobial effect than pure MX against Staphylococcus aureus and Escherichia coli. The findings suggest that bilosome in situ gel is a good alternative to increase corneal residence time, as well as to improve therapeutic activity.

Formulation and Evaluation of Enteric Coated Elementary Osmotic Tablets of Aceclofenac

Objectives

This study aimed to develop a controlled drug delivery device for aceclofenac, a non-steroidal anti-inflammatory drug. Therefore, the agent was projected to develop an osmotic pump with enteric coating. The strength of the semipermeable membrane was improved by optimizing the formulation of the device, which can control the drug release over a prolonged period of time.

Materials and Methods

The formulations were designed and optimized by using the statistical design of experiment followed by 32 factorial design to discover the best formulation. Several evaluation tests were performed to assess the physical parameters of the formulations. The percentage drug release of the formulations was observed for up to 9 h.

Results

The model 3D graph analysis indicated that as an osmogen, a higher percentage of potassium chloride was utilized more effectively than mannitol for the rapid dissolution of osmotic tablets. The optimized formulation can release 88.60±0.02% up to 9 h. The accelerated stability study confirmed that the optimized formulation was stable.

Conclusion

The formulated osmotic tablets of aceclofenac were therapeutically safe and effective and did not release any drug content in the simulated gastric medium for a predetermined time.

Recent applications of electrical, centrifugal, and pressurised emerging technologies for fibrous structure engineering in drug delivery, regenerative medicine and theranostics

Advancements in technology and material development in recent years has led to significant breakthroughs in the remit of fiber engineering. Conventional methods such as wet spinning, melt spinning, phase separation and template synthesis have been reported to develop fibrous structures for an array of applications. However, these methods have limitations with respect to processing conditions (e.g. high processing temperatures, shear stresses) and production (e.g. non-continuous fibers). The materials that can be processed using these methods are also limited, deterring their use in practical applications. Producing fibrous structures on a nanometer scale, in sync with the advancements in nanotechnology is another challenge met by these conventional methods. In this review we aim to present a brief overview of conventional methods of fiber fabrication and focus on the emerging fiber engineering techniques namely electrospinning, centrifugal spinning and pressurised gyration. This review will discuss the fundamental principles and factors governing each fabrication method and converge on the applications of the resulting spun fibers; specifically, in the drug delivery remit and in regenerative medicine.

Asymmetry in Drug Permeability through the Cornea

The permeability through the cornea determines the ability of a drug or any topically applied compound to cross the tissue and reach the intraocular area. Most of the permeability values found in the literature are obtained considering topical drug formulations, and therefore, refer to the drug permeability inward the eye. However, due to the asymmetry of the corneal tissue, outward drug permeability constitutes a more meaningful parameter when dealing with intraocular drug-delivery systems (i.e., drug-loaded intraocular lenses, intraocular implants or injections). Herein, the permeability coefficients of two commonly administered anti-inflammatory drugs (i.e., bromfenac sodium and dexamethasone sodium) were determined ex vivo using Franz diffusion cells and porcine corneas in both inward and outward configurations. A significantly higher drug accumulation in the cornea was detected in the outward direction, which is consistent with the different characteristics of the corneal layers. Coherently, a higher permeability coefficient was obtained for bromfenac sodium in the outward direction, but no differences were detected for dexamethasone sodium in the two directions. Drug accumulation in the cornea can prolong the therapeutic effect of intraocular drug-release systems.

Whole-Eye Perfusion Model for Screening of the Ocular Formulations via Confocal Laser Scanning Microscopy

Various physiological, anatomical barriers make ocular drug delivery very challenging. Hence, better in vitro screening models are needed for rapid screening of the formulations. In this study, a simple whole-eye perfusion model was designed and its application was explored for screening targeted formulation across the full-thickness cornea using confocal laser scanning microscopy. PEG-cholecalciferol-based integrin targeted coumarin-6 micelles (TC6M) and non-targeted coumarin-6 micelles (NTC6M) were developed by solvent diffusion evaporation technique. The formulations NTC6M and TC6M had particles size 23.5 ± 5 nm and 28.5 ± 6 nm respectively and osmolality of 294-300 mOsml/Kg. The whole-eye perfusion model was developed using porcine eye. TC6M and NTC6M were instilled on the excised porcine eyes as well as in the eyes of NZW rabbits. Corneas were excised from the experimental eyes; coumarin-6 penetration across the corneas was analyzed using confocal microscope. Coumarin-6-loaded micelles had particle size below 50 nm. NTC6M formulations showed penetration to the deeper layers up to 500 μm porcine eyes and up to 50 μm in rabbit corneas. However, TC6M formulations exhibited superior retention, as higher fluorescent intensities were observed in upper layers up to 50 μm depth in the porcine eye and 20 μm depth in rabbit eye. Hence, applicability of whole-eye perfusion model in preliminary screening of the formulations was successfully demonstrated. Whole-eye perfusion model when combined with confocal microscopy has potential to be used as an efficient tool for rapid screening and optimization of various ophthalmic formulations.

Natamycin solid lipid nanoparticles - sustained ocular delivery system of higher corneal penetration against deep fungal keratitis: preparation and optimization

Background

Fungal keratitis (FK) is a serious pathogenic condition usually associated with significant ocular morbidity. Natamycin (NAT) is the first-line and only medication approved by the Food and Drug Administration for the treatment of FK. However, NAT suffers from poor corneal penetration, which limits its efficacy for treating deep keratitis.

Purpose

The objective of this work was to prepare NAT solid lipid nanoparticles (NAT-SLNs) to achieve sustained drug release and increased corneal penetration.

Methods

NAT-SLNs were prepared using the emulsification-ultrasonication technique. Box– Behnken experimental design was applied to optimize the effects of independent processing variables (lipid concentration [X₁], surfactant concentration [X₂], and sonication frequency [X₃]) on particle size (R₁), zeta potential (ZP; R₂), and drug entrapment efficiency (EE%) (R₃) as responses. Drug release profile, ex vivo corneal permeation, antifungal susceptibility, and cytotoxicity of the optimized formula were evaluated.

Results

The optimized formula had a mean particle size of 42 r.nm (radius in nanometers), ZP of 26 mV, and EE% reached ~85%. NAT-SLNs showed an extended drug release profile of 10 hours, with enhanced corneal permeation in which the apparent permeability coefficient (P_app) and steady-state flux (J_ss) reached 11.59×10⁻² cm h⁻¹ and 3.94 mol h⁻¹, respectively, in comparison with 7.28×10⁻² cm h⁻¹ and 2.48 mol h⁻¹ for the unformulated drug, respectively. Antifungal activity was significantly improved, as indicated by increases in the inhibition zone of 8 and 6 mm against Aspergillus fumigatus ATCC 1022 and a Candida albicans clinical isolate, respectively, and minimum inhibitory concentration values that were decreased 2.5-times against both of these pathogenic strains. NAT-SLNs were found to be non-irritating to corneal tissue. NAT-SLNs had a prolonged drug release rate^, that improved corneal penetration, and increased antifungal activity without cytotoxic effects on corneal tissues.

Conclusion

Thus, NAT-SLNs represent a promising ocular delivery system for treatment of deep corneal keratitis.

Sustained ocular delivery of Dorzolamide-HCl via proniosomal gel formulation: in-vitro characterization, statistical optimization, and in-vivo pharmacodynamic evaluation in rabbits

Glaucoma is the second cause of blindness worldwide. Frequent administration of traditional topical dosage forms may lead to patient incompliance and failure of treatment. Our study aims to formulate proniosomal gel formulations that sustain the release of the water-soluble anti-glaucoma drug Dorzolamide-HCl (Dorz). Proniosomal gel formulations were prepared using coacervation phase separation method according to a 5² full factorial design. The effects of Cholesterol and surfactant (Span 40) amounts (independent variables) on the percentage entrapment efficiency (EE%), particle size (PS), and the percent of drug released after 8 h (Q8h) (dependent variables (DVs)) were investigated. An optimized formulation (OF) was chosen based on maximizing EE% and Q8h and minimizing PS. An intraocular pressure (IOP) pharmacodynamic study was performed in rabbits to evaluate the in-vivo performance of the OF-gel compared to the marketed Trusopt^® eye drops. The results showed that the independent variables studied significantly affected EE%, PS, and Q8h. OF was the one containing 60 mg Cholesterol and 540 mg Span 40. It had desirability of 0.885 and its actually measured DVs deviated from the predicted ones by a maximum of 4.8%. The in-vivo pharmacodynamic study showed that OF could result in higher reduction in IOP, significantly sustain that reduction in IOP and increase Dorz bioavailability compared to Trusopt^® eye drops. Thus the OF-gel is very promising for being used in glaucoma treatment.

Approaches in topical ocular drug delivery and developments in the use of contact lenses as drug-delivery devices

Drug-delivery approaches have diversified over the last two decades with the emergence of nanotechnologies, smart polymeric systems and multimodal functionalities. The intended target for specific treatment of disease is the key defining developing parameter. One such area which has undergone significant advancements relates to ocular delivery. This has been expedited by the development of material advancement, mechanistic concepts and through the deployment of advanced process technologies. This review will focus on the developments within lens-based drug delivery while touching on conventional and current methods of topical ocular drug delivery. A summary table will provide quick reference to note the key findings in this area. In addition, the review also elucidates current theranostic and diagnostic approaches based on ocular lenses.

Liposome incorporated ion sensitive in situ gels for opthalmic delivery of timolol maleate

This study was aimed to design a liposomal based ion-sensitive in situ ophthalmic delivery system of timolol maleate (TM). The TM liposome was produced by the reverse evaporation technique coupled with pH-gradients method (REVPR), and then was incorporated into deacetylated gellan gum gels. The TM liposome was demonstrated to be a round and uniform shape in TEM pictures. Compared with the TM eye drops, the TM liposome produced a 1.93 folds increase in apparent permeability coefficients (Papp), resulting in a significant increase of the corneal penetration. The TM-loaded liposome incorporated ion sensitive in situ gels (TM L-ISG) showed longer retention time on corneal surface compared with the eye drops using gamma scintigraphy technology. Draize testing showed that TM L-ISG was non-irritant for ocular tissues. The biggest efficacy of TM L-ISG occurred 30 min after eye drops administration, and efficacy disappeared after 240min. Then, compared with the eye drops, the optimal TM L-ISG could quickly reduce the intraocular pressure and the effective time was significantly longer (P≤0.05). These results indicate that liposome incorporated ion sensitive in situ gels have a potential ability for the opthalmic delivery.