Evaluation of the bioavailability of hydrocortisone when prepared as solid dispersion

Shifting the Focus from Dissolution to Permeation: Introducing the Meso-fluidic Chip for Permeability Assessment (MCPA)

In response to the growing ethical and environmental concerns associated with animal testing, numerous in vitro tools of varying complexity and biorelevance have been developed and adopted in pharmaceutical research and development. In this work, we present one of these tools, i.e., the Meso-fluidic Chip for Permeability Assessment (MCPA), for the first time. The MCPA combines an artificial barrier (PermeaPad®) with an organ-on-chip device (MIVO®) and real-time automated concentration measurements, to yield a sustainable, yet effortless method for permeation testing. The system offers three major physiological aspects, i.e., a biomimetic membrane, an optimal membrane interfacial area-to-donor-volume-ratio (A/V) and a physiological flow on the acceptor/basolateral side, which makes the MPCA an ideal candidate for mechanistic studies and excellent in vivo bioavailability predictions. We validated the method with a handful of assorted drug compounds in unstirred and stirred donor conditions, before exploring its applicability as a tool for dissolution/permeation testing on a BCS class III/I drug (pyrazinamide) crystalline adducts and BCS class II/IV (hydrocortisone) amorphous solid dispersions. The results were highly reproducible and clearly displayed the method's potential for evaluating the performance of enabling formulations, and possibly even predicting in vivo performance. We believe that, upon further development, the MCPA will serve as a useful in vitro tool that could push sustainability into pharmaceutics by refining, reducing and replacing animal testing in early-stage drug development.

Formulation of silymarin binary and ternary solid dispersions: Characterization, simulation study and cell viability assessment against lung cancer cell line

Silymarin (SL) is a water-insoluble flavonoid used in the treatment of different diseases, but its therapeutic activity is limited due to its low solubility. So, in the present study, SL solid dispersions (SDs) were developed using different carriers like Kollidone VA64 (KL), Soluplus (SP), and Poloxamer 188 (PL) by solvent evaporation (SE), microwave irradiation (MI), and freeze-drying (FD) methods. The phase solubility and saturation solubility studies were assessed to estimate the stability constant as well as the carrier effect. The dissolution studies were performed for prepared SL-SDs (binary and ternary) to select the optimum SL-SDs. The selected SL-SDs (F5, F9) were further characterized for infrared spectroscopy (IR), nuclear magnetic resonance (NMR), differential scanning calorimeter (DSC), scanning electron microscope (SEM), and X-ray diffraction (XRD). Finally, the comparative cell viability assay (lung cancer cell line) was performed to evaluate the change in activity after the formulation of SDs. The phase solubility and solubility study results displayed marked enhancements in solubility. The dissolution study findings showed significant enhancement in drug release from ternary solid dispersions (F7-F9) > ternary physical mixture (PM3) > binary solid dispersions (F1-F6) > binary physical mixture (PM1, PM2) in comparison to free SL. A greater release was observed from ternary SDs due to the addition of PL in the formulation, which had a synergistic effect on increasing the solubility. IR and NMR spectra revealed no chemical interaction between SL, KL, and PL. DSC, XRD, and SEM all confirmed the transformation of crystalline SL into amorphous SL. The cell viability assay demonstrated significantly enhanced results from ternary solid dispersion (F9) compared to free SL. Based on the study results, it can be said that SL-SDs are an alternative way to deliver drugs orally that can improve solubility and have anti-cancer activity.

Stability Challenges of Amorphous Solid Dispersions of Drugs: A Critical Review on Mechanistic Aspects

The most common drawback of the existing and novel drug molecules is their low bioavailability because of their low solubility. One of the most important approaches to enhance the bioavailability in the enteral route for poorly hydrophilic molecules is amorphous solid dispersion (ASD). The solubility of compounds in amorphous form is comparatively high because of the availability of free energy produced during formulation. This free energy results in the change of crystalline nature of the prepared ASD to the stable crystalline form leading to the reduced solubility of the product. Due to the intrinsic chemical and physical uncertainty and the restricted knowledge about the interactions of active molecules with the carriers making, this ASD is a challenging task. This review focused on strategies to stabilize ASD by considering the various theories explaining the free-energy concept, physical interactions, and thermal properties. This review also highlighted molecular modeling and machine learning computational advancement to stabilize ASD.

A quality by design framework for developing nanocrystal bioenabling formulations

The present study aims to outline a rational framework for the design and development of a 1.0% (w/v) hydrocortisone nanocrystal-based formulation, resorting to a simple, efficient, and scalable nanonization methodology, based on the high-pressure homogenization (HPH) technique. Accordingly, the innovative product was comprehensively optimized following a Quality by Design (QbD) approach. The thorough selection of formulation composition was driven by a dual purpose: improving skin permeation and stability. In the early stage of development, a Failure Mode, Effects and Criticality Analysis (FMECA) diagram was employed to identify the most impactful variables for the critical quality attributes (CQAs). In this sense, a rotatable, three-factor and five-level circumscribed central composite design (CCCD) was applied to investigate how squalene concentration (x1), soluplus concentration (x2) and HPH-time (x3) influence physicochemical properties, performance and physical stability of the formulation. A robust Design Space (DS) was defined, establishing the optimal settings for the critical variables, whose combination meets the requirements set in the quality target product profile (QTPP). Morphological analysis revealed the cuboidal shape of hydrocortisone nanocrystals. In what concerns colloidal properties, the most promising formulation disclosed a small particle size (Dx(50) = 311.8 ± 1.5 nm), along with narrow size distribution (span value = 1.91 ± 0.17). Zeta potential results (-2.19 ± 0.15 mV--12.1 ± 0.4 mV) suggested a steric hindrance stabilization. FTIR spectra showed no chemical interactions between drug and formulation components. XRD diffractograms confirmed loss of crystallinity during the downsizing process. In vitro studies revealed an improvement on drug release rate (316 ± 21-516 ± 35 μg/cm2/√t), compared to the coarse suspension and commercial products, and a straight dependence on the stabilizer concentration and HPH time. The permeation flux across the skin (0.16 ± 0.02-1.2 ± 0.5 μg/cm2/h) appeared to be dependent on the drug physicochemical properties, in particular saturation solubility. Further characterization of the experimental formulations pointed out the role of the stabilizing component to prevent against physical instability phenomena. This organic solvent-free, and therefore "green" nanocrystal production technology offers great potential for pharmaceutical R&D and drug delivery by enabling the development of new forms of conventional drugs with optimal physicochemical properties and performance.

Towards Point-of-Care Manufacturing and Analysis of Immediate-Release 3D Printed Hydrocortisone Tablets for The Treatment of Congenital Adrenal Hyperplasia

Hydrocortisone (HC) is the preferred drug in children with congenital adrenal hyperplasia due to its lower potency as well as fewer reports of side effects. Fused deposition modelling (FDM) 3D printing holds the potential to produce low-cost personalised doses for children at the point of care. However, the compatibility of the thermal process to produce immediate-release bespoke tablets for this thermally labile active is yet to be established. This work aims to develop immediate-release HC tablets using FDM 3D printing and assess drug contents as a critical quality attribute (CQA) using a compact, low-cost near-infrared (NIR) spectroscopy as a process analytical technology (PAT). The FDM 3D printing temperature (140 °C) and drug concentration in the filament (10%-15% w/w) were critical parameters to meet the compendial criteria for drug contents and impurities. Using a compact low-cost NIR spectral device over a wavelength of 900-1700 nm, the drug contents of 3D printed tablets were assessed. Partial least squares (PLS) regression was used to develop individual calibration models to detect HC content in 3D printed tablets of lower drug contents, small caplet design, and relatively complex formula. The models demonstrated the ability to predict HC concentrations over a wide concentration range (0-15% w/w), which was confirmed by HPLC as a reference method. Ultimately, the capability of the NIR model had preceding dose verification performance on HC tablets, with linearity (R² = 0.981) and accuracy (RMSECV = 0.46%). In the future, the integration of 3DP technology with non-destructive PAT techniques will accelerate the adoption of on-demand, individualised dosing in a clinical setting.

Ultrasound-responsive hyaluronic acid hydrogel of hydrocortisone to treat osteoarthritis

One of the practical ways to manage the disease flares of arthritis is using an intra-articular depot formulation of glucocorticoids. Hydrogels, as controllable drug delivery systems, are hydrophilic polymers with distinctive properties, such as remarkable water capacity and biocompatibility. This study aimed to design an injectable thermo-ultrasound-triggered drug carrier based on Pluronic® F-127, hyaluronic acid, and gelatin. The in situ hydrogel loaded by hydrocortison was developed and D-optimal design was used to formulate the process. The optimized hydrogel was combined with four different surfactants to better regulate the release rate. In situ gels composed of the hydrocortisone-loaded hydrogel and hydrocortisone-loaded mixed-micelle hydrogel were characterized. The hydrocortisone-loaded hydrogel and selected hydrocortisone-loaded mixed-micelle hydrogel showed a spherical shape and were nano-sized with a unique thermo-responsive nature able to prolong drug release. The ultrasound-triggered release study showed that drug release was time-dependent. By inducing osteoarthritis in a rat model, behavioral tests and histopathological analyses were carried out on the hydrocortisone-loaded hydrogel and a particular hydrocortisone-loaded mixed-micelle hydrogel. In vivo results showed that the selected hydrocortisone-loaded mixed-micelle hydrogel improved the status of the disease. Results highlighted the potential of ultrasound-responsive in situ-forming hydrogels as hopeful formulas for efficient treatment of arthritis.

Amalgamation of solid dispersion and melt adsorption techniques for augmentation of oral bioavailability of novel anticoagulant rivaroxaban

The objective of the present study was to evaluate the potential of solid dispersion adsorbate (SDA) to improve the solubility and bioavailability of rivaroxaban (RXN). SDA of RXN was developed by fusion method using PEG 4000 as carrier and Neusilin as adsorbent. A 3² full factorial design was utilized to formulate various SDAs. The selected independent variables were the amount of carrier (X₁) and amount of adsorbent (X₂). The responses measured were the time required for 85% drug release (Y₁) and saturated solubility (Y₂). MTT assay was employed for cytotoxicity studies on Caco-2 cells. In vivo pharmacokinetics and pharmacodynamic evaluations were carried out to assess the prepared SDA. Pre-compression evaluation of SDA suggests the prepared batches (B1-B9) possess adequate flow properties and could be used for compression of tablets. Differential scanning calorimetry and X-ray diffraction data signified the conversion of the crystalline form of drug to amorphous form, a key parameter accountable for improvement in drug dissolution. Optimization data suggests that the amount of carrier and amount of adsorbent significantly (P < 0.05) influence both dependent variables. Post-compression data signifies that the compressibility behavior of prepared tablets was within the official standard limits. A significant increase (P < 0.0001) in the in vitro dissolution characteristics of RXN was noticed in optimized SDA (> 85% in 10 min) as compared to the pure drug, marketed product, and directly compressible tablet. Cytotoxicity studies confirmed the nontoxicity of prepared RXN SDA tablets. RXN SDA tablets exhibited 2.79- and 1.85-fold higher AUC in comparison to RXN suspension and Xarelto tablets respectively indicating improved oral bioavailability. Higher bleeding time and percentage of platelet aggregation noticed with RXN SDA tablets in comparison to RXN suspension further substantiate the efficacy of the prepared formulation. In summary, the results showed the potential of RXN SDA tablets to enhance the bioavailability of RXN and hence can be an alternate approach of solid dosage form for its development for commercial application.

How to Improve Solubility and Dissolution of Irbesartan by Fabricating Ternary Solid Dispersions: Optimization and In-Vitro Characterization

The purpose of this study is to improve the solubility and dissolution of a poorly soluble drug, Irbesartan, using solid dispersion techniques. For that purpose, different polymers such as Soluplus^®, Kollidon^® VA 64, Kolliphor^® P 407, and Polyinylpyrrolidone (PVP-K30) were used as carriers at different concentrations to prepare solid dispersion formulations through the solvent evaporation method. In order to prepare binary dispersion formulations, Soluplus^® and Kollidon^® VA 64 were used at drug: polymer ratios of 1:1, 1:2, 1:3, and 1:4 (w/w). Saturation solubility of the drug in the presence of used carriers was performed to investigate the quantitative increase in solubility. Dissolution studies were performed to explore the drug release behavior from the prepared dispersions. Additionally, the characterization of the prepared formulations was carried out by performing DSC, SEM, XRD, and FTIR studies. The results revealed that among binary systems, K₄ formulation (Drug: Kollidon^® VA 64 at ratio of 1:4 w/w) exhibited optimal performance in terms of increased solubility, drug release, and other investigated parameters. Furthermore, ternary dispersion formulations of the optimized binary formulation were prepared with two more polymers, Kolliphor^® P 407 and Polyvinylpyrrolidone (PVP-K30), at (Drug: Kollidon^® VA 64:ternary polymer) ratios of 1:4:1, 1:4:2, and 1:4:3 (w/w). The results showed that KPVP (TD₃) exhibited the highest increase in solubility, as well as dissolution rate, among ternary solid dispersion formulations. Results of solubility enhancement by ternary solid dispersion formulations were also supported by FTIR, DSC, XRD, and SEM analysis. Conclusively, it was found that the ternary solid dispersion-based systems were more effective compared to the binary combinations in improving solubility as well as dissolution of a poorly soluble drug (Irbesartan).

A Poly (Caprolactone)-Cellulose Nanocomposite Hydrogel for Transdermal Delivery of Hydrocortisone in Treating Psoriasis Vulgaris

Psoriasis vulgaris (PV) is a common chronic disease, affecting much of the population. Hydrocortisone (HCT) is currently utilized as a PV treatment; however, it is associated with undesirable side effects. The aim of this research was to create a thermo-responsive nano-hydrogel delivery system. HCT-loaded sorbitan monostearate (SMS)-polycaprolactone (PCL) nanoparticles, encapsulated with thermo-responsive hydrogel carboxymethyl cellulose (CMC), were synthesized by applying the interfacial polymer-deposition method following solvent displacement. The nanoparticles’ properties were evaluated employing Differential Scanning Colorimetry, Thermogravimetric Analysis, Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy, Zeta sizer, Ultraviolet/Visual spectroscopy, and cytotoxicity testing. The nanoparticle sizes were 110.5 nm, with polydispersity index of 0.15 and zeta potential of −58.7 mV. A drug-entrapment efficacy of 76% was attained by the HCT-loaded SMS-PCL nanoparticles and in vitro drug-release profiles showed continuous drug release over a period of 24 hrs. Keratinocyte skin cells were treated with HCT-loaded SMS-PCL nanoparticles encapsulated with CMC; the results indicated that the synthesized drug-delivery system was less toxic to the keratinocyte cells compared to HCT. The combined trials and results from the formulation of HCT-loaded SMS-PCL nanoparticles encapsulated with CMC showed evidence that this hydrogel can be utilized as a potentially invaluable formulation for transdermal drug delivery of HCT, with improved efficacy and patient conformity.

Self-Nanoemulsifying Drug Delivery System (SNEDDS) of Apremilast: In Vitro Evaluation and Pharmacokinetics Studies

Psoriatic arthritis is an autoimmune disease of the joints that can lead to persistent inflammation, irreversible joint damage and disability. The current treatments are of limited efficacy and inconvenient. Apremilast (APR) immediate release tablets Otezla® have 20-33% bioavailability compared to the APR absolute bioavailability of 73%. As a result, self-nanoemulsifying drug delivery systems (SNEDDS) of APR were formulated to enhance APR's solubility, dissolution, and oral bioavailability. The drug assay was carried out using a developed and validated HPLC method. Various thermodynamic tests were carried out on APR-SNEDDS. Stable SNEDDS were characterized then subjected to in vitro drug release studies via dialysis membrane. The optimum formulation was F9, which showed the maximum in vitro drug release (94.9%) over 24 h, and this was further investigated in in vivo studies. F9 was composed of 15% oil, 60% Smix, and 25% water and had the lowest droplet size (17.505 ± 0.247 nm), low PDI (0.147 ± 0.014), low ZP (-13.35 mV), highest %T (99.15 ± 0.131) and optimum increases in the relative bioavailability (703.66%) compared to APR suspension (100%) over 24 h. These findings showed that APR-SNEDDS is a possible alternative delivery system for APR. Further studies are warranted to evaluate the major factors that influence the encapsulation efficiency and stability of APR-containing SNEDDS.

Improving Anticancer Activity of Chrysin using Tumor Microenvironment pH-Responsive and Self-Assembled Nanoparticles

Chrysin is a natural bioactive compound with potential biological activities. However, unfavorable physicochemical properties of native chrysin make it difficult to achieve good therapeutic efficacies. In this study, poly(ethylene) glycol (PEG₄₀₀₀)-conjugated chrysin nanoparticles were prepared. The PEG₄₀₀₀ was conjugated to chrysin through cis-aconityl and succinoyl linkers to achieve tumor microenvironment-specific drug release from PEGylated nanoparticles. The conjugation of PEG and chrysin via succinoyl (PCNP-1) and cis-aconityl (PCNP-2) linkers was confirmed by the ¹H NMR and FTIR analysis. The nanoparticles were characterized by DLS, TEM, XRD, and DSC analysis. Comparatively, PCNP-2 showed a better drug release profile and higher anticancer activity against human breast cancer cells than chrysin or PCNP-1. The apoptosis studies and colony formation inhibition assay revealed that the PCNP-2 induced more apoptosis and more greatly controlled the growth of human breast cancer cells than pure chrysin. Thus, the use of PCNPs may help to overcome the issues of chrysin and could be a better therapeutic approach.

Rectal bioavailability of amoxicillin sodium in rabbits: Effects of suppository base and drug dose

In this paper, rectal absorption and tissue tolerance of amoxicillin sodium (AS) suppositories prepared in a hydrophilic base, polyethylene glycol (PEG) or lipophilic base, Suppocire® NA 15 (SNA 15), were investigated. Following in vitro characterization, including drug distribution in the suppository bases, drug-base interactions and drug release, pharmacokinetics were investigated in rabbits to determine absolute bioavailability (F) at two dose levels (100 mg and 200 mg). Both types of suppositories were found uniform in weight and content. Powder X-ray diffraction (XRD) and differential scanning calorimetry indicated that AS existed as solid dispersion or anhydrous crystalline dispersion in both suppositories at different ratios without changing melting points of the bases. This was supported by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy conjugated with energy dispersive X-ray (SEM/EDX). In dissolution medium, melting and spreading of SNA 15 and dissolution of PEG suppositories accounted for their different drug release kinetics and mean dissolution time (MDT). A rapid and complete amoxicillin absorption (F close to 100%) with a double peak pharmacokinetic profile was observed alongside minimal signs of tissue irritation in rabbits treated with SNA 15 suppositories at both dose levels. In contrast, the F of amoxicillin from PEG suppositories was 59%, increasing to 77.3% as AS dose doubled from 100 mg to 200 mg, reflected in the slower release predominately controlled by erosion of the base. An in vitro - in vivo correlation was observed (MDT vs F; p < 0.01). AS was stable in SNA 15 suppositories at least for three months at 20 ± 0.2 °C. This research highlighted the advantages of SNA 15 suppositories over the PEG suppositories in providing rapid and complete rectal absorption of AS and tissue compatibility.

Glibenclamide Nanocrystal-Loaded Bioactive Polymeric Scaffolds for Skin Regeneration: In Vitro Characterization and Preclinical Evaluation

Skin restoration following full-thickness injury poses significant clinical challenges including inflammation and scarring. Medicated scaffolds formulated from natural bioactive polymers present an attractive platform for promoting wound healing. Glibenclamide was formulated in collagen/chitosan composite scaffolds to fulfill this aim. Glibenclamide was forged into nanocrystals with optimized colloidal properties (particle size of 352.2 nm, and polydispersity index of 0.29) using Kolliphor as a stabilizer to allow loading into the hydrophilic polymeric matrix. Scaffolds were prepared by the freeze drying method using different total polymer contents (3-6%) and collagen/chitosan ratios (0.25-2). A total polymer content of 3% at a collagen/chitosan ratio of 2:1 (SCGL3-2) was selected based on the results of in vitro characterization including the swelling index (1095.21), porosity (94.08%), mechanical strength, rate of degradation and in vitro drug release. SCGL3-2 was shown to be hemocompatible based on the results of protein binding, blood clotting and percentage hemolysis assays. In vitro cell culture studies on HSF cells demonstrated the biocompatibility of nanocrystals and SCGL3-2. In vivo studies on a rat model of a full-thickness wound presented rapid closure with enhanced histological and immunohistochemical parameters, revealing the success of the scaffold in reducing inflammation and promoting wound healing without scar formation. Hence, SCGL3-2 could be considered a potential dermal substitute for skin regeneration.

Impact of Matrix Surface Area on Griseofulvin Release from Extrudates Prepared via Nanoextrusion

We aimed to examine the impact of milling of extrudates prepared via nanoextrusion and the resulting matrix surface area of the particles on griseofulvin (GF, a model poorly soluble drug) release during in vitro dissolution. Wet-milled GF nanosuspensions containing a polymer (Sol: Soluplus^®, Kol: Kolliphor^® P407, or HPC: Hydroxypropyl cellulose) and sodium dodecyl sulfate were mixed with additional polymer and dried in an extruder. The extrudates with 2% and 10% GF loading were milled–sieved into three size fractions. XRPD–SEM results show that nanoextrusion produced GF nanocomposites with Kol/HPC and an amorphous solid dispersion (ASD) with Sol. For 8.9 mg GF dose (non-supersaturating condition), the dissolution rate parameter was higher for extrudates with higher external specific surface area and those with 10% drug loading. It exhibited a monotonic increase with surface area of the ASD, whereas its increase tended to saturate above ~30 × 10⁻³ m²/cm³ for the nanocomposites. In general, the nanocomposites released GF faster than the ASD due to greater wettability and faster erosion imparted by Kol/HPC than by Sol. For 100 mg GF dose, the ASD outperformed the nanocomposites due to supersaturation and only 10% GF ASD with 190 × 10⁻³ m²/cm³ surface area achieved immediate release (80% release within 30 min). Hence, this study suggests that ASD extrudates entail fine milling yielding > ~200 × 10⁻³ m²/cm³ for rapid drug release, whereas only a coarse milling yielding ~30 × 10⁻³ m²/cm³ may enable nanocomposites to release low-dose drugs rapidly.

Potential of solid dispersions to enhance solubility, bioavailability, and therapeutic efficacy of poorly water-soluble drugs: newer formulation techniques, current marketed scenario and patents

In the last few decades, solid dispersion (SD) technology had been studied as an approach to produce an amorphous carrier to enhance the solubility, dissolution rate, and bioavailability of poorly water-soluble drugs. The use of suitable carrier and methodology in the preparation of SDs play a significant role in the biological behavior of the SDs. SDs have been prepared using a variety of pharmaceutically acceptable polymers utilizing various novel technologies. In the recent years, much attention has been paid toward the use of novel carriers and methodologies in exploring novel types of SDs to enhance therapeutic efficacy and bioavailability. The use of novel carriers and methodologies would be very beneficial for formulation scientists to develop some SDs-based formulations for their commercial use and clinical applications. In the present review, current literature of novel methodologies for SD preparation to enhance the dissolution rate, solubility, therapeutic efficacy, and bioavailability of poorly water-soluble drugs has been summarized and analyzed. Further, the current status of SDs, patent status, and future prospects have also been discussed.

A Green RP-HPTLC-Densitometry Method for the Determination of Diosmin in Pharmaceutical Formulations

Green analytical technologies for the determination of a bioactive compound diosmin (DIOM) in the real samples of pharmaceutical formulations and biological fluids are scarce in literature. Therefore, the present investigation was carried out to develop a novel, rapid, simple, and economical green “reversed phase high-performance thin-layer chromatography (RP-HPTLC)” method for the determination of DIOM in commercial tablets and in-house developed spray-dried microparticles (MPs). The quantification of DIOM was conducted via “RP-18 silica gel 60 F254S HPTLC plates”. The binary combination of green solvents, i.e., ethanol:water (5.5:4.5 v/v) was proposed as a green mobile phase. The analysis of DIOM was conducted in absorbance/reflectance mode of densitometry at λmax = 348 nm. The densitograms of DIOM from the commercial tablets and in-house developed spray-dried MPs were verified by recording their single band at Rf = 0.80 ± 0.02 compared to standard DIOM. Green RP-HPTLC method was observed as linear in the range of 100–700 ng/band with R2 = 0.9995. The proposed method was found as “accurate, precise, robust, and sensitive” for the determination of DIOM in the real samples of commercial tablets and in-house developed spray-dried MPs. The % content of DIOM in the real samples of commercial tablets and in-house developed spray-dried MPs was obtained as 99.06 and 101.30%, respectively. The recorded results of this research suggested that the green RP-HPTLC method can be effectively used for the routine analysis of DIOM in pharmaceutical products.

Plant-Derived Butters as Lipid Nanocarriers: A Systematic and Prospective Review

BACKGROUND

Pharmaceutical nanotechnology represents an efficient alternative for the delivery of pharmacologically active plant-derived compounds, considering their protective capacity, oral bioavailability and drug vectorization capacity. In this context, butters obtained from plant seeds have emerged as promising products for the development of pharmacologically active nanostructures. They possess a complex lipid composition, allowing the formation of different emulsion systems with solid cores, since this mixture of different triglycerides is solid at room temperature and body temperature. Therefore, the systematic mapping around the technological development of nanostructures produced from plant-derived butters is potentially valuable for researchers interested in novel alternative formulations for pharmacological therapy, with potential industrial, economic, health and societal impacts.

METHODS

Systematic review was carried out by the search of scientific papers and patents deposited in official databases concerning the development of nanostructured pharmaceutical products using plantderived butters as starting material. The publications obtained were subjected to sorting and analysis by applying the following inclusion/exclusion criteria.

RESULTS

The Solid Lipid Nanoparticle (SLN) was the type of nanostructure produced in all the analyzed scientific papers, due to the physicochemical characteristics of the lipid constituents of plantderived butters. In this sense, 54% of the articles have reported the use of Cocoa Butter for the production of nanostructures; 28% for Shea Butter; 6% for Cupuacu Butter, 6% for Murumuru Butter and 6% for Bacuri Butter.

DISCUSSION

In the technological prospection, only two patents exhibited SLN as an invention based on cocoa butter and on shea butter, respectively. The production methods employed have included: phase inversion temperature, microemulsion, hot high pressure homogenization, high shear homogenization and ultrasonication.

CONCLUSION

In light of this prospective review, the encouragement of novel studies in lipids-based nanotechnology is evident, considering the small number of findings so far, in order to stimulate new research involving plant-derived butters from easily cultivated fruits in tropical regions, then stimulating the pharmaceutical development of new therapeutic alternatives using biocompatible and sustainable raw materials.