Sutures versus new cyanoacrylates in prosthetic abdominal wall repair: a preclinical long-term study

Swim bladder-derived biomaterials: structures, compositions, properties, modifications, and biomedical applications

Animal-derived biomaterials have been extensively employed in clinical practice owing to their compositional and structural similarities with those of human tissues and organs, exhibiting good mechanical properties and biocompatibility, and extensive sources. However, there is an associated risk of infection with pathogenic microorganisms after the implantation of tissues from pigs, cattle, and other mammals in humans. Therefore, researchers have begun to explore the development of non-mammalian regenerative biomaterials. Among these is the swim bladder, a fish-derived biomaterial that is rapidly used in various fields of biomedicine because of its high collagen, elastin, and polysaccharide content. However, relevant reviews on the biomedical applications of swim bladders as effective biomaterials are lacking. Therefore, based on our previous research and in-depth understanding of this field, this review describes the structures and compositions, properties, and modifications of the swim bladder, with their direct (including soft tissue repair, dural repair, cardiovascular repair, and edible and pharmaceutical fish maw) and indirect applications (including extracted collagen peptides with smaller molecular weights, and collagen or gelatin with higher molecular weights used for hydrogels, and biological adhesives or glues) in the field of biomedicine in recent years. This review provides insights into the use of swim bladders as source of biomaterial; hence, it can aid biomedicine scholars by providing directions for advancements in this field.

Suturing Versus Adhesion for Mesh Fixation in Ventral Hernia Repair and Abdominal Wall Reconstruction: A Systematic Review and Network Meta-Analysis

Abdominal wall reconstruction (AWR) is a surgical procedure performed to address various conditions such as hernias, incisional hernias, and complex abdominal wall defects. Mesh fixation plays a crucial role in providing mechanical reinforcement to the weakened abdominal wall during AWR. Traditionally, suturing has been the preferred method for mesh fixation; however, adhesion techniques using tissue adhesives or glues have gained attention as an alternative approach. This systematic review aims to compare suturing and adhesion techniques for mesh fixation in AWR and assess their effectiveness in preventing hernia recurrence. A comprehensive literature search was conducted across relevant databases, including PubMed, MEDLINE, Embase, and the Cochrane Library. Studies that fulfilled the predetermined eligibility criteria were included. The primary outcome measure of interest was hernia recurrence rates. Secondary outcomes included mesh-related complications, surgical site infections, patient-reported outcomes, and functional outcomes. A risk of bias assessment was performed for the included studies, and data were synthesized qualitatively. Overall, the results of the included studies suggest that atraumatic mesh fixation with glue may have the potential to reduce chronic groin pain (CGP). However, there were significant variations in patient selection criteria, glue administration techniques, and hernia repair methods among the trials, which limited the ability to draw definitive conclusions. Additionally, the definitions of CGP and measurement scales for postoperative pain varied across studies, making it challenging to compare outcomes. The limitations of the review include the small sample sizes in some trials, relatively short follow-up durations, and the lack of standardized criteria for assessing variables such as foreign body sensation and groin compliance. Furthermore, the economic implications of using glue fixation compared to traditional suture fixation need to be considered.

Self-adhesive hydrogel meshes reduce tissue incorporation and mechanical behavior versus microgrips self-fixation: a preclinical study

Purpose

Atraumatic mesh fixation for abdominal hernia repair has been developed to avoid the disadvantages of classical fixation with sutures, which is considered a cause of chronic pain and discomfort. This study was designed to analyze, in the short and medium term, the biological and mechanical behavior of two self-fixing meshes compared to that of a polypropylene (PP) mesh fixed with a cyanoacrylate (CA) tissue adhesive.

Methods

Partial abdominal wall defects (6 × 4 cm) were created in New Zealand rabbits (n = 36) and repaired using a self-adhesive hydrogel mesh (Adhesix™), a self-gripping mesh (ProGrip™) or a PP mesh fixed with CA (Surgipro™ CA). After 14 and 90 days, the host tissue incorporation, macrophage response and biomechanical strength were examined.

Results

At 14 and 90 days, the ProGrip and Surgipro CA meshes showed good host tissue incorporation; however, the Adhesix implants presented poor integration, seroma formation and a higher degree of shrinkage. The Adhesix hydrogel was completely reabsorbed at 14 days, whereas ProGrip microhooks were observed at all study times. The macrophage response was higher in the ProGrip and Surgipro CA groups at 14 and 90 days, respectively, and decreased over time. At 90 days, the ProGrip implants showed the highest tensile strength values and the Adhesix implants showed the highest failure stretch.

Conclusion

Meshes with mechanical microgrip self-fixation (ProGrip) show better biological and mechanical behavior than those with adhesive hydrogel (Adhesix) in a preclinical model of abdominal hernia repair in rabbits.

Antibacterial polypropylene mesh fixation with a cyanoacrylate adhesive improves its response to infection

BACKGROUND

Antibacterial meshes for hernia repair seek to avoid infection in the patient. As these biomaterials are especially prone to bacteria settling at their sutured borders, this study examines whether the use of a cyanoacrylate tissue adhesive could improve mesh behavior at the fixation zones.

METHODS

First, antibacterial polypropylene meshes were prepared by soaking in 0.05% chlorhexidine, and the response of n-hexyl cyanoacrylate to contamination with Staphylococcus aureus ATCC25923 was assessed in vitro. Then, in a preclinical model, partial defects (5 x 3 cm) were created in the abdominal wall of 18 New Zealand White rabbits and repaired with mesh to establish the following 3 study groups: (1) mesh without chlorhexidine fixed with cyanoacrylate, (2) antibacterial mesh fixed with sutures, and (3) antibacterial mesh fixed with cyanoacrylate (n = 6 each). The implants were inoculated with 10⁶ CFU/mL of S aureus. At 14 days after surgery, bacterial adhesion to the implant and its integration within host tissue were determined through microbiological, histological and immunohistochemical procedures.

RESULTS

As observed in vitro, the cyanoacrylate gave rise to a 1.5-cm bacteria-free margin around the prosthetic mesh. In vivo, the tissue adhesive prevented bacterial adhesion to the fixation zones, reducing infection of chlorhexidine-free meshes and optimizing the efficacy of the antibacterial meshes compared with those fixed with sutures.

CONCLUSION

These findings indicated that cyanoacrylate fixation does not affect mesh integration into the host tissue. Likewise, the antibacterial behavior and tissue response of a chlorhexidine-treated polypropylene mesh is improved when cyanoacrylate is used for its fixation.

Correlating the mass and mechanical property changes during the degradation of PEG-based adhesive

Change in mechanical property of a degrading adhesive is critical to its performance. However, characterization of degradation behavior is often limited to tracking its mass loss. 4-armed PEG end modified with dopamine (PEG-DA) was used as a model bioadhesive to correlate its change in mass with change in mechanical property. Shear modulus (G) was calculated based on the mass and average molecular weight between crosslinks( M ¯ c ) of PEG-DA, while the storage modulus (G') was determined by oscillatory rheometry. G decreased slowly within the first week of degradation (10% reduction by week 2), while G' decreased by 60% during the same period. This large discrepancy is due to the partially disconnected and elastically ineffective PEG polymer, which is trapped within the adhesive network. This resulted in minimal mass change and higher calculated G value during the earlier time points. Therefore, tracking mass loss profile alone is inadequate to completely describe the degradation behavior of an adhesive. Additionally, PEG-DA was coated onto magnetoelastic (ME) sensors, and the change in the resonance amplitude of the sensor corresponded well with dry mass loss of PEG-DA. ME sensing provide a non-destructive method to track the mass loss of the coated adhesive.

Multifunctional Biomedical Adhesives

Currently available biomedical adhesives are mainly engineered to have one function (i.e., providing mechanical support for the repaired tissue). To improve the performance of existing bioadhesives and broaden their applications in medicine, numerous multifunctional bioadhesives are reported in the literature. These adhesives can be categorized as passive or active by design. Passive multifunctional bioadhesives contain inherent compositions and structural designs that can carry out additional functions without added external influences. These adhesives exhibit new functionalities such as antimicrobial properties, self-healing abilities, the ability to promote cellular ingrowth, and the ability to be reshaped. Conversely, active multifunctional bioadhesives respond to environmental changes (e.g., pH, temperature, electricity, light, and biomolecule concentration), which initiate a change in the adhesive to release encapsulated drugs or to activate or deactivate the bioadhesive for interfacial binding. This review article highlights recent advances in multifunctional bioadhesives.

Comparison between N-butyl cyanoacrylate tissue adhesive and Ethilon nylon sutures in extraoral maxillofacial incisions: A randomized prospective study

Objectives

Wound closure is a part of any surgical procedure. Wound care and healing process are concepts, which are usually reliant upon sutures. The suture and non-suture repair of the tissues has been a major concern to surgeons for over four thousand years. The objective of this study is to compare the rates of infection, wound dehiscence, necrosis and time required by N-butyl cyanoacrylate tissue adhesive and nylon sutures in extraoral maxillofacial wound closer.

Materials and methods

24 patients requiring external wound closing were included in this study. Patients were divided in two groups, in one group wound closer was done by N-butyl cyanoacrylate tissue adhesive and by conventional nylon suture in the other group. The software STATA^® of StataCorp was used in statistical analysis if this study.

Results

Wound infection, dehiscence, necrosis of tissue edges, time taken for closure was much less in case of tissue adhesive than conventional sutures.

Conclusion

Advantages of tissue adhesives over conventional wound closure techniques include easy to use, excellent bacteriostatic property, decreased repair time, elimination of recall visits and comparable short and long-term cosmetic outcome. Though tissue adhesives have many advantages over conventional wound closure techniques, they can be used as an alternative to sutures only in superficial small and tension free skin incisions or lacerations.

Pre-clinical assay of the tissue integration and mechanical adhesion of several types of cyanoacrylate adhesives in the fixation of lightweight polypropylene meshes for abdominal hernia repair

INTRODUCTION

Lightweight (LW) polypropylene (PP) meshes better adapt to host tissue, causing less fibrosis and inflammatory responses than high-density meshes. Mesh fixation using tissue adhesives (TA) that replace conventional sutures may improve the process of hernia repair and tissue trauma. This preclinical study compares the behavior of different cyanoacrylate-based adhesives in the fixation of LW-PP meshes for hernia repair.

METHODS

Partial abdominal wall defects were repaired using LW-PP Optilene meshes in New Zealand rabbits. The following groups were established according to the mesh fixation method: Suture (control), Glubran 2 (n-butyl), Ifabond (n-hexyl), SafetySeal (n-butyl) and Evobond (n-octyl). At 14, 90 and 180 days after surgery, the recovered implants were examined to assess the host tissue integration, the macrophage response and the biomechanical strength.

RESULTS

All the groups showed optimal host tissue incorporation regardless of the fixation procedure. Significantly increased levels of collagen 1 and collagen 3 gene expression (p<0.001) were observed at 14 days compared to the medium- and long-term durations, where the Suture and Glubran groups showed the highest expression of collagen 1. All the adhesives increased the macrophage reaction (p<0.001) compared to sutures at all implant times. Maximal macrophage response was observed in the short-term Glubran group (p<0.01) compared to the rest of the groups. Although SafetySeal and Evobond did not reach the biomechanical resistance of sutures at 14 days, all the adhesives did reach this level in the medium- to long-term periods, providing significantly higher resistance (p<0.05).

CONCLUSIONS

All the cyanoacrylates, despite inducing a significantly increased macrophage response versus sutures, showed optimal host tissue integration and long-term mechanical behavior; thus, they might be good choices for LW-PP mesh hernia repairs.

Voltaglue Bioadhesives Energized with Interdigitated 3D-Graphene Electrodes

Soft tissue fixation of implant and bioelectrodes relies on mechanical means (e.g., sutures, staples, and screws), with associated complications of tissue perforation, scarring, and interfacial stress concentrations. Adhesive bioelectrodes address these shortcomings with voltage cured carbene-based bioadhesives, locally energized through graphene interdigitated electrodes. Electrorheometry and adhesion structure activity relationships are explored with respect to voltage and electrolyte on bioelectrodes synthesized from graphene 3D-printed onto resorbable polyester substrates. Adhesive leachates effects on in vitro metabolism and human-derived platelet-rich plasma response serves to qualitatively assess biological response. The voltage activated bioadhesives are found to have gelation times of 60 s or less with maximum shear storage modulus (G') of 3 kPa. Shear modulus mimics reported values for human soft tissues (0.1-10 kPa). The maximum adhesion strength achieved for the ≈50 mg bioelectrode films is 170 g cm^-2 (17 kPa), which exceeds the force required for tethering of electrodes on dynamic soft tissues. The method provides the groundwork for implantable bio/electrodes that may be permanently incorporated into soft tissues, vis-à-vis graphene backscattering wireless electronics since all components are bioresorbable.