1
|
Nandy N, Pasupathi A, Subramaniam Y, Nachimuthu S. Eliminating ciprofloxacin antibiotic contamination from water with a novel submerged thermal plasma technology. CHEMOSPHERE 2023; 326:138470. [PMID: 36958495 DOI: 10.1016/j.chemosphere.2023.138470] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/16/2023] [Revised: 03/16/2023] [Accepted: 03/19/2023] [Indexed: 06/18/2023]
Abstract
Thermal plasma is successfully used to degrade the model pharmaceutical wastewater ciprofloxacin (CIP) under submerged operating conditions at atmospheric pressure. The model aqueous solution is prepared for two different concentrations (10 and 25 mg/L) and treated separately at 7 kW discharge power with two different plasma-forming gas compositions, Ar/Air and Ar/CO2. A direct current (DC) hollow cathode plasma torch produces a thermal plasma jet inside the solution. The effect of plasma gas compositions on the CIP degradation process is investigated, and the corresponding degradation and mineralisation efficiencies for different treatment times are systematically compared using high-performance liquid chromatography (HPLC) and total organic carbon (TOC) analysis, respectively. Submerged Ar/CO2 plasma shows higher degradation and mineralisation efficiency than the Ar/Air plasma. Energy yields of 74.32 mg/kWh and 176.98 mg/kWh are achieved for a 5-min treatment by Ar/CO2 submerged thermal plasma at concentrations of 10 mg/L and 25 mg/L, respectively. The degradation of CIP by submerged plasma shows a resemblance with first-order reaction kinetics having reaction rates 0.149 min-1 and 0.073 min-1 for Ar/CO2 and Ar/Air, respectively. Density Functional Theory (DFT) calculations are used to identify the various reactive sites on CIP, and the results are consistent with the formation of various intermediates detected through liquid chromatography-mass spectrometry (LC-MS) analysis. These findings suggest that reactive species formed through thermal and photochemical processes in submerged thermal plasma play a significant role in the degradation of CIP. This study also offers a possible way of using CO2 gas in wastewater treatment using submerged thermal plasma.
Collapse
Affiliation(s)
- Nanditta Nandy
- Applied Thermal Plasma Laboratory, Department of Physics, Pondicherry University, Puducherry, 605014, India
| | - Amarnath Pasupathi
- Applied Thermal Plasma Laboratory, Department of Physics, Pondicherry University, Puducherry, 605014, India
| | - Yugeswaran Subramaniam
- Applied Thermal Plasma Laboratory, Department of Physics, Pondicherry University, Puducherry, 605014, India.
| | - Santhanamoorthi Nachimuthu
- Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei, 106, Taiwan
| |
Collapse
|
2
|
Xu M, Fukuyama Y, Nakai K, Liu Z, Sumiya Y, Okino A. Characteristics of Double-Layer, Large-Flow Dielectric Barrier Discharge Plasma Source for Toluene Decomposition. PLASMA 2023. [DOI: 10.3390/plasma6020016] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/05/2023] Open
Abstract
The direct decomposition of toluene-containing humidified air at large flow rates was studied in two types of reactors with dielectric barrier discharge (DBD) features in ambient conditions. A scalable large-flow DBD reactor (single-layer reactor) was designed to verify the feasibility of large-flow plasma generation and evaluate its decomposition characteristics with toluene-containing humidified air, which have not been investigated. In addition, another large-flow DBD reactor with a multilayer structure (two-layer reactor) was developed as an upscale version of the single-layer reactor, and the scalability and superiority of the features of the multilayer structure were validated by comparing the decomposition characteristics of the two reactors. Consequently, the large-flow DBD reactor showed similar decomposition characteristics to those of the small-flow DBD reactor regarding applied voltage, flow velocity, flow rate, and discharge length, thus justifying the feasibility of large-flow plasma generation. Additionally, the two-layer reactor is more effective than the single-layer reactor, suggesting multilayer configuration is a viable scheme for further upscaled DBD systems. A high decomposition rate of 59.5% was achieved at the considerably large flow rate of 110 L/min. The results provide fundamental data and present guidelines for the implementation of the DBD plasma-based system as a solution for volatile organic compound abatement.
Collapse
Affiliation(s)
- Mao Xu
- Laboratory for Future Interdisciplinary Research of Science and Technology, Tokyo Institute of Technology, J2-32, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan
| | - Yohei Fukuyama
- Laboratory for Future Interdisciplinary Research of Science and Technology, Tokyo Institute of Technology, J2-32, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan
| | - Kazuki Nakai
- Laboratory for Future Interdisciplinary Research of Science and Technology, Tokyo Institute of Technology, J2-32, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan
| | - Zhizhi Liu
- Laboratory for Future Interdisciplinary Research of Science and Technology, Tokyo Institute of Technology, J2-32, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan
| | - Yuki Sumiya
- Laboratory for Future Interdisciplinary Research of Science and Technology, Tokyo Institute of Technology, J2-32, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan
| | - Akitoshi Okino
- Laboratory for Future Interdisciplinary Research of Science and Technology, Tokyo Institute of Technology, J2-32, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan
| |
Collapse
|
3
|
Yoda N, Abe Y, Suenaga Y, Matsudate Y, Hoshino T, Sugano T, Nakamura K, Okino A, Sasaki K. Resin Cement-Zirconia Bond Strengthening by Exposure to Low-Temperature Atmospheric Pressure Multi-Gas Plasma. MATERIALS 2022; 15:ma15020631. [PMID: 35057349 PMCID: PMC8778450 DOI: 10.3390/ma15020631] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/21/2021] [Revised: 01/11/2022] [Accepted: 01/12/2022] [Indexed: 12/10/2022]
Abstract
The purpose of this study was to investigate the effect of gas species used for low-temperature atmospheric pressure plasma surface treatment, using various gas species and different treatment times, on zirconia surface state and the bond strength between zirconia and dental resin cement. Three groups of zirconia specimens with different surface treatments were prepared as follows: untreated group, alumina sandblasting treatment group, and plasma treatment group. Nitrogen (N2), carbon dioxide (CO2), oxygen (O2), argon (Ar), and air were employed for plasma irradiation. The bond strength between each zirconia specimen and resin cement was compared using a tension test. The effect of the gas species for plasma irradiation on the zirconia surface was investigated using a contact angle meter, an optical interferometer, an X-ray diffractometer, and X-ray photoelectric spectroscopy. Plasma irradiation increased the wettability and decreased the carbon contamination on the zirconia surface, whereas it did not affect the surface topography and crystalline phase. The bond strength varied depending on the gas species and irradiation time. Plasma treatment with N2 gas significantly increased bond strength compared to the untreated group and showed a high bond strength equivalent to that of the sandblasting treatment group. The removal of carbon contamination from the zirconia surface and an increase in the percentage of Zr-O2 on the zirconia surface by plasma irradiation might increase bond strength.
Collapse
Affiliation(s)
- Nobuhiro Yoda
- Division of Advanced Prosthetic Dentistry, Tohoku University Graduate School of Dentistry, Sendai 980-8575, Japan; (Y.M.); (T.S.); (K.S.)
- Correspondence: ; Tel.: +81-22-717-8369
| | - Yuri Abe
- FIRST, Tokyo Institute of Technology, Yokohama 226-8502, Japan; (Y.A.); (Y.S.); (A.O.)
| | - Yuma Suenaga
- FIRST, Tokyo Institute of Technology, Yokohama 226-8502, Japan; (Y.A.); (Y.S.); (A.O.)
| | - Yoshiki Matsudate
- Division of Advanced Prosthetic Dentistry, Tohoku University Graduate School of Dentistry, Sendai 980-8575, Japan; (Y.M.); (T.S.); (K.S.)
| | - Tomohiro Hoshino
- Joint Research Department of Next-Generation Dental Material Engineering, Tohoku University Graduate School of Dentistry, Sendai 980-8575, Japan;
| | - Takehiko Sugano
- Division of Advanced Prosthetic Dentistry, Tohoku University Graduate School of Dentistry, Sendai 980-8575, Japan; (Y.M.); (T.S.); (K.S.)
| | - Keisuke Nakamura
- Department of Advanced Free Radical Science, Tohoku University Graduate School of Dentistry, Sendai 980-8575, Japan;
| | - Akitoshi Okino
- FIRST, Tokyo Institute of Technology, Yokohama 226-8502, Japan; (Y.A.); (Y.S.); (A.O.)
| | - Keiichi Sasaki
- Division of Advanced Prosthetic Dentistry, Tohoku University Graduate School of Dentistry, Sendai 980-8575, Japan; (Y.M.); (T.S.); (K.S.)
- Joint Research Department of Next-Generation Dental Material Engineering, Tohoku University Graduate School of Dentistry, Sendai 980-8575, Japan;
| |
Collapse
|
4
|
Terefinko D, Dzimitrowicz A, Bielawska-Pohl A, Klimczak A, Pohl P, Jamroz P. The Influence of Cold Atmospheric Pressure Plasma-Treated Media on the Cell Viability, Motility, and Induction of Apoptosis in Human Non-Metastatic (MCF7) and Metastatic (MDA-MB-231) Breast Cancer Cell Lines. Int J Mol Sci 2021; 22:ijms22083855. [PMID: 33917790 PMCID: PMC8068204 DOI: 10.3390/ijms22083855] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/03/2021] [Revised: 03/30/2021] [Accepted: 04/05/2021] [Indexed: 12/20/2022] Open
Abstract
Breast cancer remains the most common type of cancer, occurring in middle-aged women, and often leads to patients’ death. In this work, we applied a cold atmospheric pressure plasma (CAPP)-based reaction-discharge system, one that is unique in its class, for the production of CAPP-activated media (DMEM and Opti-MEM); it is intended for further uses in breast cancer treatment. To reach this aim, different volumes of DMEM or Opti-MEM were treated by CAPP. Prepared media were exposed to the CAPP treatment at seven different time intervals and examined in respect of their impact on cell viability and motility, and the induction of the apoptosis in human non-metastatic (MCF7) and metastatic (MDA-MB-231) breast cancer cell lines. As a control, the influence of CAPP-activated media on the viability and motility, and the type of the cell death of the non-cancerous human normal MCF10A cell line, was estimated. Additionally, qualitative and quantitative analyses of the reactive oxygen and nitrogen species (RONS), generated during the CAPP operation in contact with analyzed media, were performed. Based on the conducted research, it was found that 180 s (media activation time by CAPP) should be considered as the minimal toxic dose, which significantly decreases the cell viability and the migration of MDA-MB-231 cells, and also disturbs life processes of MCF7 cells. Finally, CAPP-activated media led to the apoptosis of analyzed cell lines, especially of the metastatic MDA-MB-231 cell line. Therefore, the application of the CAPP system may be potentially applied as a therapeutic strategy for the management of highly metastatic human breast cancer.
Collapse
Affiliation(s)
- Dominik Terefinko
- Department of Analytical Chemistry and Chemical Metallurgy, Faculty of Chemistry, Wroclaw University of Science and Technology, Wybrzeze St. Wyspianskiego 27, 50-370 Wroclaw, Poland; (P.P.); (P.J.)
- Laboratory of Biology of Stem and Neoplastic Cells, Hirszfeld Institute of Immunology and Experimental Therapy, Polish Academy of Sciences, Weigla 12, 53-114 Wroclaw, Poland; (A.B.-P.); (A.K.)
- Correspondence: (D.T.); (A.D.)
| | - Anna Dzimitrowicz
- Department of Analytical Chemistry and Chemical Metallurgy, Faculty of Chemistry, Wroclaw University of Science and Technology, Wybrzeze St. Wyspianskiego 27, 50-370 Wroclaw, Poland; (P.P.); (P.J.)
- Correspondence: (D.T.); (A.D.)
| | - Aleksandra Bielawska-Pohl
- Laboratory of Biology of Stem and Neoplastic Cells, Hirszfeld Institute of Immunology and Experimental Therapy, Polish Academy of Sciences, Weigla 12, 53-114 Wroclaw, Poland; (A.B.-P.); (A.K.)
| | - Aleksandra Klimczak
- Laboratory of Biology of Stem and Neoplastic Cells, Hirszfeld Institute of Immunology and Experimental Therapy, Polish Academy of Sciences, Weigla 12, 53-114 Wroclaw, Poland; (A.B.-P.); (A.K.)
| | - Pawel Pohl
- Department of Analytical Chemistry and Chemical Metallurgy, Faculty of Chemistry, Wroclaw University of Science and Technology, Wybrzeze St. Wyspianskiego 27, 50-370 Wroclaw, Poland; (P.P.); (P.J.)
| | - Piotr Jamroz
- Department of Analytical Chemistry and Chemical Metallurgy, Faculty of Chemistry, Wroclaw University of Science and Technology, Wybrzeze St. Wyspianskiego 27, 50-370 Wroclaw, Poland; (P.P.); (P.J.)
| |
Collapse
|