Highly selective and sensitive detection of Fe3+, Al3+ and picric acid by a water-stable luminescent MOF

A Chromo-fluorogenic Probe for Selective Detection of Picric Acid Alongside Its Recovery by Aliphatic Amines and Construction of Molecular Logic Gates

Nitroaromatic compounds are illicit explosive chemicals. For environmental security and homeland safety, selective and sensitive identification of these secondary-class explosives has been a reason for the exhaustive research arena of chemists for about a decade. We introduced a sensitive optical sensor with desalted neutral red (NR) dye. After ingressing picric acid (PA) in acetonitrile, the probe becomes non-fluorescent, displaying a colorimetric change from yellow to pink. The quenched phenomena and the changed color were re-established with aliphatic amine, trimethylamine (TEA). The reversibility is produced cyclically, both in fluorimetrically and spectrophotometrically. The detection limit for PA with our probe comes out as 0.639 µM; this value is significantly lower than many chemosensors available in the literature. Also, NR-stained filter paper strips-based test kit analysis has been deployed as a displayable photonic device for in-situ detection of PA. Furthermore, the whole system was conceptualized to produce single input, single output, and double input single output logic gates, which can be applied to digital devices. The chronological input manner as NTP (NR- TEA-PA) pushed us to configure a molecular keypad lock system, the basis of digital locking devices. The repeatable & reversible detection system exhibits "Write read- Erase-read Write-read' type memory devices.

Hematoxylin Nuclear Stain Reports Oxidative Stress via Near-Infrared Emission

Hematoxylin & eosin (H&E) is the gold standard histological stain used for medical diagnosis and has been used for over a century. Herein, we examined the near-infrared II (NIR-II) fluorescence of this stain. We observed significant NIR-II emission from the hematoxylin component of the H&E stain. We found that the emission intensity, using the common aluminum(III) hematoxylin mordant, could be modulated by the availability of endogenous iron(III), and this emission intensity increased at higher oxidative stress. Our mechanistic investigations found that hematoxylin emission reported the nuclear translocation of the iron via the protein ferritin. In human tumor tissue samples, oxidative stress biomarkers correlated with hematoxylin NIR-II emission intensity. Emission response of the stain was also observed in human Alzheimer's disease brain tissue regions affected by disease progression, suggesting that ferritin nuclear translocation is preserved in these regions as an oxidative stress response. These findings indicate that NIR-II emission from the H&E stain provides a new source of redox information in tissues with implications for biomedical research and clinical practice.

A stable lanthanum-based metal-organic framework as fluorescent sensor for detecting TNP and Fe3+ with hyper-sensitivity and ultra-selectivity

A new Lanthanum-based luminescent metal-organic framework, {[La(H₂O)₄(HL)]·H₂O} (1), has been successfully synthesized by employing 3,3',5,5'-azodioxybenzenetetracarboxylic acid (H₄L) as a rigid organic linker through the solvothermal reactions. 1 exhibits a two-dimensional (2D) layered structure and a three-dimensional (3D) supramolecular structure is formed by hydrogen bonds between the layers. Stability studies indicate that 1 has good chemical stability and thermostability. Meanwhile, the K_sv values for TNP is 4.61 × 10⁴ M^-1 with the LOD of 4.13 × 10^-6 M and the K_sv value for Fe³⁺ is 1.22 × 10⁴ M^-1 with the LOD of 1.72 × 10^-5 M, respectively, which demonstrated that 1 exhibits high sensitivity and excellent selectivity for the detection of TNP and Fe³⁺via fluorescence quenching. Significantly, 1 shows high regenerability after five recycling progress for sensing Fe³⁺. The possible mechanisms associated with the luminescent quenching are discussed in detail through some relevant experiments and tests, as well as the DFT calculations. Based on the above excellent properties of 1, it will have extremely potential to be used as a dual functional sensor for both detecting TNP and Fe³⁺ in aqueous solution, simultaneously.

Highly selective fluorescent turn-on-off sensing of OH-, Al3+ and Fe3+ ions by tuning ESIPT in metal organic frameworks and mitochondria targeted bio-imaging

Herein we report a multifunctional high performance metal organic framework (Zn-DHNDC MOF) based chemosensor that displays an exceptional excited state intramolecular proton transfer (ESIPT) tuned fluorescence turn-on-off response for OH-, Al3+ and Fe3+ ions along with mitochondria targeted bio-imaging. Properly tuning ESIPT as well as the hydroxyl group (-OH) allows Zn-DHNDC MOF to optimize and establish chelation enhanced fluorescence (CHEF) and chelation enhanced quenching (CHEQ) based sensing mechanisms. The MOF benefits from acid-base interactions with the ions which generate a turn-on bluish green fluorescence (λ Em 492 nm) for OH-, an intense turn-on green fluorescence (λ Em 528 nm) for Al3+ and a turn-off fluorescence quenching response for Fe3+ ions. The aromatic -OH group indeed plays its part in triggering CHEF and CHEQ processes responsible for the turn-on-off events. Low limits of detection (48 nM of OH-, 95 nM for Al3+, 33 nM for Fe3+ ions), high recyclability and fast response time (8 seconds) further assist the MOF to implement an accurate quantitative sensing strategy for OH-, Al3+ and Fe3+ ions. The study further demonstrates the MOF's behaviour in cellular medium by subjecting it to live cell confocal microscopy. Along with a bio-compatible nature the MOF exhibited successful accumulation inside the mitochondria of MCF7 cancer cells, which defines it as a significant bio-marker. Therefore the present work successfully represents the multidisciplinary nature of Zn-DHNDC MOFs, primarily in sensing and biomedical studies.

Response of a Zn(II)-based metal-organic coordination polymer towards trivalent metal ions (Al3+, Fe3+ and Cr3+) probed by spectroscopic methods

A new zinc-based two-dimensional coordination polymer, [Zn(5-AIP)(Ald-4)]·H2O (5-AIP = 5-amino isophthalate, Ald-4 = aldrithiol-4), 1, has been synthesized at room temperature by the layer diffusion technique. Single-crystal X-ray diffraction analysis of 1 showed a two-dimensional bilayer structure. An aqueous suspension of 1 upon excitation at 300 nm displayed an intense blue emission at 403 nm. The luminescence spectra were interestingly responsive and selective to Al3+, Cr3+ and Fe3+ ions even in the presence of other interfering ions. The calculated detection limits for Al3+, Cr3+ and Fe3+ were 0.35 μM ([triple bond, length as m-dash]8.43 ppb), 0.46 μM ([triple bond, length as m-dash]22.6 ppb) and 0.30 μM ([triple bond, length as m-dash]15.85 ppb), respectively. Notably, with the cumulative addition of Al3+ ions, the luminescence intensity at 403 nm decreased steadily with a gradual red shift up to 427 nm. Afterward, this red shifted peak showed a turn-on effect upon further addition of Al3+ ions. On the other hand, for Cr3+ and Fe3+ ions, there was only drastic luminescence quenching and a large red shift up to 434 nm. This indicated the formation of a complex between 1 and these metal ions, which was also supported by the UV-Visible absorption spectra of 1 that showed the appearance of a new band at 280 nm in the presence of these three metal ions. The FTIR spectra revealed that these ions interacted with the carboxylate oxygen atom of 5-AIP and the nitrogen atom of the Ald-4 ligand in the structure. The luminescence lifetime decay analysis manifested that a charge-transfer type complex was formed between 1 and Cr3+ and Fe3+ ions that resulted in huge luminescence quenching due to the efficient charge transfer involving the vacant d-orbitals, whereas for Al3+ ions having no vacant d-orbital, turn-on of luminescence occurred because of the increased rigidity of 1 upon complexation.

A New Compound for Sequential Sensing of Picric Acid and Aliphatic Amines: Physicochemical Details and Construction of Molecular Logic Gates

Picric acid (PA) at low concentration is a serious water pollutant. Alongside, aliphatic amines (AAs) add to the queue to pollute surface water. Plenty of reports are available to sense PA with an ultralow limit of detection (LOD). However, only a handful of works are testified to detect AAs. A new fluorescent donor-acceptor compound has been synthesized with inherent intramolecular charge transfer (ICT) character that enables selective and sensitive colorimetric quantitative detection of PA and AAs with low LODs in non-aqueous as well as aqueous solutions. The synthesized compound is based on a hemicyanine skeleton containing two pyridenylmethylamino groups at the donor and a benzothiazole moiety at the acceptor ends. The detailed mechanisms and reaction dynamics are explained spectroscopically along with computational support. The fluorescence property of the detecting compound changes due to protonation of its pyridinyl centers by PA leading to quenching of fluorescence and subsequently de-protonation by AAs to revive the signal. We have further designed logic circuits from the acquired optical responses by sequential interactions.

A novel"turn-off"fluorescence assay based on acid-copper nanoclusters in deep eutectic solvent micelles for co-aggregation inducing fluorescence enhancement and its application

As mixtures, deep eutectic solvent (DES) is designability. By adjusting the long alkyl chain hydrogen bond acceptors (HBAs) or hydrogen bond donors (HBDs), the DES displays surfactant characteristics and can form micelles. Hence, a novel, simple, facile and green natural organic acids capped copper nanoclusters (Aci-CuNCs) was synthesized and the spectrum behavior of Aci-CuNCs in DES micelles was researched. It was found that the surfactant-like DES can form micellar co-aggregation with Aci-CuNCs, resulting in the fluorescence (FL) intensive of Aci-CuNCs increase. Corresponding performance of spectral properties of Aci-CuNCs in DES medium were systematically studied by fourier transform infrared spectrometer, 3D FL spectroscopy, FL emission/excitation spectra, ultraviolet absorption spectroscopy. In the mechanism exploration part, on the one hand, the existence of micellar co-aggregation was confirmed by the conductivity, the mass effect of DES, dynamic light scattering and transmission electron microscopy. On the other hand, the influence of different kinds of DESs (types of HBAs/HBDs, molar ratio) and some possible factors (ionic strength and temperature) were discussed in detail to investigate the main driving forces for the formation of micellar co-aggregates. The results of mechanism exploration prove that the long alkyl chain of DES is amphiphilic which can form micellar co-aggregation with Aci-CuNCs through hydrogen bonding. The DES micelle provides Aci-CuNCs with a relatively stable and closed micro-environment which can effectively prevent collisions with water molecules and weakening of fluorescence intensity. On the basic of the above research, a "turn-off" fluorimetric method based on Aci-CuNCs in DES medium was applied for the determination of Fe³⁺. Under the optimum conditions, the assay worked in the Fe³⁺ concentration ranges from 1 to -20 μM and had a detection limit of 0.0374 μM. Method validation study illustrates the proposed system can provide a good accuracy, repeatability and stability conditions. Furthermore, the real sample analysis result demonstrates that no obvious matrix effect is found. As a consequence, the FL assays (Aci-CuNCs-based DES) composed of natural organic acid capped CuNCs and green solvent DES provides a simple, gentle and environmentally friendly method for the detection of iron ions.

A multifunctional benzothiadiazole-based fluorescence sensor for Al3+, Cr3+ and Fe3+

A benzothiadiazole-based Zn^II MOF (JXUST-3) has been synthesized, which is a good multifunctional chemosensor for the detection of Al³⁺, Cr³⁺ and Fe³⁺.

A luminescent Cd(II)-metal organic frameworks combined of TPT and H3BTC detecting 2,4,6-trinitrophenol and chromate anions in aqueous

A new luminescence Cd(II)-MOF (1) ([Cd₃(BTC)₂(TPT)(H₂O)₂]·4H₂O, TPT = tris(4-pyridyl)triazine, H₃BTC = 1,3,5-benzenetricarboxylic acid) was successfully synthesized under solvothermal conditions. 1 contains 3D framework which consist of Cd atoms and btc^3- anions with the large channels along c axis. Then, tpt ligands locate in the channels by utilizing three N atoms to bridge two Cd1 atoms and one Cd2 atom. 1 not only possesses remarkable thermal stability, but also can steadily exist in different organic solvents and various acid/base solutions (pH = 3-12). Moreover, 1 can detect 2,4,6-trinitrophenol (TNP) and chromate (CrO₄^2-/Cr₂O₇^2-) anions with high selectivity and sensitivity in water via the luminescent quenching. The detection limits of 1 for TNP and CrO₄^2-/Cr₂O₇^2- are 6.23 μM and 2.13 μM/2.87 μM. The mechanism of TNP luminescence quenching may be attributed to photoinduced electron transfer and resonance energy transfer, and CrO₄^2-/Cr₂O₇^2- quenching involves resonance energy transfer and competitive absorption of light. Additionally, 1 has the great anti-interference ability and repeatability for detecting TNP and CrO₄^2-/Cr₂O₇^2-, which can display the feasibility of this material as a stable luminescent probe in aqueous system.

Dramatic luminescence signal from a Co(ii)-based metal–organic compound due to the construction of charge-transfer bands with Al3+ and Fe3+ ions in water: steady-state and time-resolved spectroscopic studies

A Co(ii)-based metal–organic compound exhibits luminescence turn-on by Al³⁺ and quenching by Fe³⁺ due to the formation of charge-transfer complexes/adducts.