A luminescent Zn-MOF constructed from l-aspartic acid and 4,4-bipyridine: Selectively and sensitively detect Fe3+ and 2,4,6-trinitrophenol (TNP) in aqueous solution

Metal-organic frame material encapsulated Rhodamine 6G: A highly sensitive fluorescence sensing platform for the detection of picric acid contaminants in water

As a water pollutant with excellent solubility, 2,4,6-trinitrophenol (also known as picric acid, PA) poses a potential threat to the natural environment and human health, so it is crucial important to detect PA in water. In this study, a novel composite material (MIL-53(Al)@R6G) was successfully synthesized by encapsulating Rhodamine 6G into a metal-organic frame material, which was used for fluorescence detection of picric acid (PA) in water. The composite exhibits bright yellow fluorescence emission with a fluorescence quantum yield of 58.23 %. In the process of PA detection, the composite has excellent selectivity and anti-interference performance, and PA can significantly quench the fluorescence intensity of MIL-53(Al)@R6G. MIL-53(Al)@R6G has the advantages of fast detection time (20 s), wide linear range (1-100 µM) and low detection limit (4.8 nM). In addition, MIL-53(Al)@R6G has demonstrated its potential for the detection of PA in environmental water samples with satisfactory results.

Zn-coordination polymers for fluorescence sensing various contaminants in water

Luminescent coordination polymers (LCPs) have garnered significant attention from researchers as promising materials for detecting contaminants. In this paper, three new LCPs ([Zn(tib)(opda)]n⋅H2O (1), [Zn3(tib)2(mpda)3]n⋅5H2O (2), [Zn (tib)(ppda)]n⋅H2O (3)) with different structures (LCP 1-3: 1D, 2D, 1D) using phenylenediacetic acid isomers and 1,3,5-tris (1-imidazolyl) benzene (tib) are synthesized. The specific surface areas (BET) of LCP 1-3 are 4 m2/g, 19 m2/g, and 13 m2/g respectively. LCP 1-3 exhibit excellent fluorescence properties and can serve as fluorescent probe for the detection of inorganic contaminants and organic contaminants. Due to the large BET of LCP 2, the detection limits for trace analytes surpass those of LCP 1 and 3. The detection limits of LCP 2 for Fe3+, nitrobenzene (NB), chloramphenicol (CAP), and pyrimethanil (PTH) are 8.3 nM, 0.016 μM, 0.19 μM, and 0.032 μM, respectively, and the fluorescence quenching rates are 98.6 %, 98.8 %, 92.3 %, and 98.8 %, respectively. These values outperform most reported in the literature. The quantum yields of LCP 1-3 are 11.84 %, 25.22 %, 22.00 % respectively. Real sample testing of LCP 1-3 reveals favorable performance, where spiked recoveries of LCP 2 for the detection of pyrimethanil in grape skins ranged from 99.62 % to 119.3 % with a relative standard deviation (RSD) of 0.627 % to 4.56 % (n = 3). The fluorescence quenching mechanism was attributed to a combination of photoelectron transfer (PET), resonance energy transfer (RET), and competitive absorption (CA). This study advances the application of LCPs in luminescence sensing and contributes to the expansion of novel materials for detecting environmental pollutants.

A Ni-MOF as Fluorescent/Electrochemical Dual Probe for Ultrasensitive Detection of Picric Acid from Aqueous Media

A water-stable, microporous, luminescent Ni(II)-based metal-organic framework (MOF) (Ni-OBA-Bpy-18) with a 4-c uninodal sql topology was solvothermally synthesized using mixed N-, O-donor-directed π-conjugated co-ligands. The extraordinary performance of this MOF toward rapid monitoring of mutagenic explosive trinitrophenol (TNP) in aqueous and vapor phases by the fluorescence "Turn-off" technique with an ultralow detection limit of 66.43 ppb (K_sv: 3.45 × 10⁵ M^-1) was governed by a synchronous occurrence of photoinduced electron transfer-resonance energy transfer-intermolecular charge transfer (PET-RET-ICT) and non-covalent π···π weak interactions, as revealed from density functional theory studies. The recyclable nature of the MOF, detection from complex environmental matrices, and fabrication of a handy MOF@cotton-swab detection kit certainly escalated the on-field viability of the probe. Interestingly, the presence of electron-withdrawing TNP decisively facilitated the redox events of the reversible Ni^III/II and Ni^IV/III couples under an applied voltage based on which electrochemical recognition of TNP was realized by the Ni-OBA-Bpy-18 MOF/glassy carbon electrode, with an excellent detection limit of ∼0.6 ppm. Such detection of a specific analyte by MOF-based probe via two divergent yet coherent techniques is unprecedented and yet to be explored in relevant literature.

A "Turn-On" fluorescent probe for detection and removal of Zn2+ in aqueous and its application in living cells

Using 3-hydroxy-2-naphthoic acid hydrazine and 4-(diethylamino) salicylaldehyde. as raw materials, compound L with an acylhydrazones structure was synthesized. The structure of compound L was characterized by nuclear magnetic resonance spectroscopy, X-ray single crystal diffraction, Fourier transform infrared spectroscopy, and mass spectrometry. The results show that Compound L can quickly and selectively recognize zinc ions in the H₂O/DMSO (V:V = 3:7) solvent system. After that, the spectral performance of probe L was studied by fluorescence spectroscopy and UV-vis spectroscopy. The results show that the combination with Zn²⁺ can significantly enhance the fluorescence intensity of probe L while being almost unaffected by other coexisting ions. After that, Job's curve method, nuclear magnetic titration analysis, and mass spectrometry were used to study the binding mechanism of probe L and Zn²⁺. The results showed that probe L coordinated with Zn²⁺ is 1:1. The linear equations of different concentrations of Zn²⁺ and fluorescence intensity were obtained by fitting, and the detection limit of probe L for Zn²⁺ was determined to be 6.75 × 10^-9 mol/L. The experimental study of standard addition and recovery showed that probe L could be used for the quantitative detection of Zn²⁺ in natural water samples. After that, we prepared L-doped sodium alginate hydrogel (SAL). The research results show that SAL has obvious adsorption capacity for Zn²⁺ in solution, and the color change before and after adsorption can be easily distinguished by the naked eye under ultraviolet light. SEM-EDS study showed that the microscopic morphology and composition of SAL changed significantly before and after adsorption. This fluorescent probe can be used for detection and removal of Zn²⁺ in aqueous solution. Also, probe L is effective for sensing for zinc (II) in living tumor cells. Overall, this work allows us to obtain a great potential to be applied to detect and remove Zn²⁺.

Two bis-ligand-coordinated Zn(ii)-MOFs for luminescent sensing of ions, antibiotics and pesticides in aqueous solutions

Two organometallic complexes with two and three-dimensional architectures were constructed by using multiple ligands and Zn(ii) ions: [Zn3(BTC)2(DTP)4(H2O)2]·(H2O)4 (Zn-1) (BTC = benzene-1,3,5-tricarboxylic acid and DTP = 3,5-di(1,2,4-triazol-1-yl)pyridine) and [Zn2(NTD)2(DTP)] (Zn-2) (NTD = 1,4-naphthalenedicarboxylic acid). The as-prepared complexes were characterized by single-crystal X-ray diffraction (SCXRD), elemental analysis, powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and fluorescence analysis. Fluorescence sensing tests revealed that the two complexes are effective, sensitive and selective toward cationic Fe3+ and anionic MnO4 - and Cr2O7 2-. During the antibiotic sensing process, cefixime (CFX) for Zn-1 and nitrofurantoin (NFT) for Zn-2 exhibited the highest quenching efficiencies. For sensing pesticides, the highest quenching efficiencies were exhibited by imidacloprid (IMI) toward Zn-1 and Zn-2. The fluorescence quenching of the complexes that was induced by antibiotics, pesticides and MnO4 - was attributed to both the inner filter effect (IFE) and the fluorescence resonance energy transfer (FRET) effect.

A Eu(iii) metal–organic framework based on anthracenyl and alkynyl conjugation as a fluorescence probe for the selective monitoring of Fe3+ and TNP

In this work, a luminescent metal–organic framework (Eu-MOF {[Eu₆L₆(μ₃-OH)₈(H₂O)₃]₈·H₂O}_n) was constructed by a solvothermal method with a linear organic ligand L (10-[(2-amino-4-carboxyl-phenyl)ethynyl]anthracene-9-carboxylic acid) based on anthracene and alkyne groups and using Eu³⁺ as the metal center. The MOF exhibits a stable UiO-66 crystal structure, and a six-core cluster twelve-linked secondary structural unit was successfully synthesized using 2-fluorobenzoic acid as a modulator, forming a classical fcu topology. Moreover, it exhibits good chemical stability. Interestingly, Eu-MOF exhibited high selectivity and sensitive fluorescence burst properties towards Fe³⁺ ions and 2,4,6-trinitrophenol (TNP) in DMF solution. For Fe³⁺, the K_SV value is 5.06 × 10⁵ M⁻¹ and the LOD value is 5.1 × 10⁻⁷ M. For TNP, the K_SV value is 1.92 × 10⁴ M⁻¹ and the LOD value is 1.93 × 10⁻⁶ M. In addition, Eu-MOF showed good anti-interference ability and fast response. This work provides an excellent fluorescent sensor for the detection of Fe³⁺ and 2,4,6-trinitrophenol (TNP) residues in contaminants.

In this work, Eu-MOF has been synthesized and has excellent luminescence recognition ability for Fe³⁺ and TNP with good selectivity and high sensitivity via luminescence quenching.

A hydrostable Zn2+ coordination polymer for multifunctional detection of inorganic and organic contaminants in water

From the perspective of human health and environmental safety, the development of hydrostable fluorescent sensors for the detection of heavy metal ions and nitroaromatics is an important but a challenging issue. To this end, a water-stable Zn²⁺ coordination polymer formulated as {[Zn(H₂L)]·2DMF·3H₂O}_n (ZnCP) was prepared elaborately by a solvothermal method using a multidentate ligand (H₄L) with 2,6-pyridine-dicarboxylic acid spaced by para-substituted benzene. Single-crystal analysis shows that the new ZnCP exhibits one-dimensional chain structural features, which further promoted to afford a wrinkled two-dimensional network structure via inter-chain hydrogen bonding. Powder X-ray diffraction and fluorescence measurements show that it can maintain crystallinity and structural integrity under harsh acidic and alkaline conditions with the pH ranging from 4 to 11. Notably, the bright blue-emissive ZnCP showed selective fluorescence quenching effects for Fe³⁺ and picric acid (PA), which makes it an excellent chemical sensor for Fe³⁺ and picric acid (PA) with low detection limits of 0.41 and 0.26 μM in water. The recognition mechanism of Fe³⁺ could be attributed to UV absorption competition and resonance energy transfer in the aid of weak electrostatic interactions, while the recognition mechanism of PA is considered to be a multi-quenching mechanism dominated by absorption competition and PET effects with the assistance of hydrogen bonding. In addition, poly(methyl methacrylate) (PMMA) films doped with ZnCP (ZnCP@PMMA) were developed to provide better sensing performance and portability for practical applications.