Intercalation of 1,2,4-triazole in methanol modified-kaolinite: Application for copper corrosion inhibition in concentrated sodium chloride aqueous solution

Experimental and advanced equilibrium studies on the enhanced adsorption of phosphate, cadmium, and safranin dye pollutants using methoxy exfoliated glauconite

Natural glauconite, as a mixed-layered clay mineral, was subjected to exfoliation processes, producing silicate monolayers or individual sheets that were further modified with methanol into methoxy exfoliated glauconite (Mth/EXG). The structure was assessed as an enhanced adsorbent for three types of common water contaminants, including phosphate (PO4 3-), safranin-O dye (SFR), and cadmium metal ions (Cd2+). The Mth/EXG structure achieved promising adsorption capacities at the saturation points equal to 269.9 mg/g for PO4 3-, 312 mg/g for SFR, and 234.5 mg/g for Cd2+ which are significantly better than the reported values for several studied adsorbents of higher costs and complex production procedures. The adsorption processes and the predicted regulated mechanisms in terms of the adsorbate/adsorbent interface were illustrated based on the steric and energetic findings that correspond to the applied monolayer equilibrium model of one energy site. The structure displays active site densities of 82.5 mg/g (PO4 3-), 136.3 mg/g (SFR), and 83.4 mg/g (Cd2+), which illustrate the high uptake performance of SFR. Also, the steric parameters reflected the suitability of each existing site to be filled with 4 ions of PO4 3-, SFR, and Cd2+. The adsorption energy (less than 40 kJ/mol) in conjunction with free adsorption energy from D-R model (8-16 kJ/mol) and steric parameters validate the dominant impact of the multi-ionic physical mechanisms (hydrogen bonding and van der Waals forces), in addition to the assistant impact of some weak chemical processes that might be assigned to the formed inner-sphere complex. Also, these reactions all occurred spontaneously with exothermic behaviors according to the thermodynamic functions. Additionally, the structure exhibit significant affinity for the studied pollutants even in the existing of completive chemical including anions, cations and organic molecules.

Enhanced Retention of Cd(II) by Exfoliated Bentonite and Its Methoxy Form: Steric and Energetic Studies

Synergistic studies were conducted to evaluate the retention potentiality of exfoliating bentonite (EXBEN) as well as its methanol hybridization derivative (Mth/EXBEN) toward Cd(II) ions to be able to verify the effects of the transformation processes. The adsorption characteristics were established by considering the steric and energetic aspects of the implemented advanced equilibrium simulation, specifically the monolayer model with a single energy level. Throughout the full saturation states, the adsorption characteristics of Cd(II) increased substantially to 363.7 mg/g following the methanol hybridized treatment in comparison to EXBEN (293.2 mg/g) as well as raw bentonite (BEN) (187.3 mg/g). The steric analysis indicated a significant rise in the levels of the active sites following the exfoliation procedure [retention site density (Nm) = 162.96 mg/g] and the chemical modification with methanol [retention site density (Nm) = 157.1 mg/g]. These findings clarify the improvement in the potential of Mth/EXBEN to eliminate Cd(II). Furthermore, each open site of Mth/EXBEN has the capacity to bind approximately three ions of Cd(II) in a vertically aligned manner. The energetic investigations, encompassing the Gaussian energy (less than 8 kJ/mol) plus the adsorption energy (less than 40 kJ/mol), provide evidence of the physical sequestration of Cd(II). This process may involve the collaborative impacts of dipole binding forces (ranging from 2 to 29 kJ/mol) and hydrogen binding (less than 30 kJ/mol). The measurable thermodynamic functions, particularly entropy, internal energy, and free enthalpy, corroborate the exothermic and spontaneous nature of Cd(II) retention by Mth/EXBEN, as opposed to those by EXBEN and BE.

New Inhibitor Based on Hydrolyzed Keratin Peptides for Stainless Steel Corrosion in Physiological Serum: An Electrochemical and Thermodynamic Study

Reducing the impact of some biological fluids on bioimplants involves the control of surface characteristics by modeling the interface architecture and assembling ecofriendly thin films to retard corrosion. Therefore, a mixture of hydrolyzed keratin peptides (HKER) was investigated as a corrosion inhibitor for 304L stainless steel (SS) in physiological serum (PS), using electrochemical measurements associated with optical microscopy and atomic force microscopy (AFM). The tests, performed for various concentrations of the inhibitor at different temperatures, showed that the inhibition efficiency (IE) decreased with a rise in temperature and proportionally increased with the HKER concentration, reaching its maximum level, around 88%, at 25 °C, with a concentration of 40 g L-1 HKER in physiological serum. The experimental data best fitted the El-Awady adsorption model. The activation parameters (Ea, ∆Ha and ∆Sa) and the adsorption ones (∆Gads0, ∆Hads, ∆Sads) have highlighted a mixed action mechanism of HKER, revealing that physisorption prevails over chemisorption. AFM parameters, such as the average roughness (Ra), root-mean-square roughness (Rq) and maximum peak-to-valley height (Rp-v), confirmed HKER adsorption, indicating that a smoother surface of the 304L stainless steel was obtained when immersed in a PS-containing inhibitor, compared to the surface designed in blank solution, due to the development of a protective layer on the alloy surface.

Synthesis and Characterization of Methoxy-Exfoliated Montmorillonite Nanosheets as Potential Carriers of 5-Fluorouracil Drug with Enhanced Loading, Release, and Cytotoxicity Properties

Natural bentonite clay (BE) underwent modification steps that involved the exfoliation of its layers into separated nanosheets (EXBE) and further functionalization of these sheets with methanol, forming methoxy-exfoliated bentonite (Mth/EXBE). The synthetically modified products were investigated as enhanced carriers of 5-fluorouracil as compared to raw bentonite. The modification process strongly induced loading properties that increased to 214.4 mg/g (EXBE) and 282.6 mg/g (Mth/EXBE) instead of 124.9 mg/g for bentonite. The loading behaviors were illustrated based on the kinetic (pseudo-first-order model), classic isotherm (Langmuir model), and advanced isotherm modeling (monolayer model of one energy). The Mth/EBE carrier displays significantly higher loading site density (95.9 mg/g) as compared to EXBE (66.2 mg/g) and BE (44.9 mg/g). The loading numbers of 5-Fu in each site of BE, EXBE, and Mth/EXBE (>1) reflect the vertical orientation of these loaded ions involving multi-molecular processes. The loading processes that occurred appeared to be controlled by complex physical and weak chemical mechanisms, considering both Gaussian energy (<8 KJ/mol) as well as loading energy (<40 KJ/mol). The releasing patterns of EXBE and Mth/EXBE exhibit prolonged and continuous properties up to 100 h, with Mth/EXBE displaying much faster behaviors. Based on the release kinetic modeling, the release reactions exhibit non-Fickian transport release properties, validating cooperative diffusion and erosion release mechanisms. The cytotoxicity of 5-Fu is also significantly enhanced by these carriers: 5-Fu/BE (8.6% cell viability), 5-Fu/EXBE (2.21% cell viability), and 5-Fu/Mth/EXBE (0.73% cell viability).

Cysteine as an Alternative Eco-Friendly Corrosion Inhibitor for Absorption-Based Carbon Capture Plants

Inorganic corrosion inhibitors are commonly applied to mitigate severe corrosion in absorption-based carbon capture plants. They are, however, not environmentally friendly, posing a health risk, harming the environment, and making chemical handling and disposal costly. Therefore, this study evaluated the corrosion inhibition performance of an amino acid, namely cysteine, with the aim of providing an eco-friendly alternative to the commercial inorganic corrosion inhibitors. Electrochemical and weight loss corrosion measurements showed that cysteine was effective in protecting carbon steel at all process operating conditions. At 80 °C, a 500 ppm cysteine could provide up to 83% and 99% inhibition efficiency under static and dynamic flow conditions, respectively. Its inhibition efficiency could be improved when the cysteine concentration, solution temperature, and flow condition were altered. Cysteine was an anodic corrosion inhibitor and underwent spontaneous, endothermic, and combined physical and chemical adsorption that followed the Langmuir adsorption isotherm model. The quantum chemical analysis indicated that cysteine had a high reactivity with metal surfaces due to its low energy gap and high dipole moment. The EDX analysis revealed a significant sulphur content on the metal substrate, indicating that cysteine's mercapto group played an integral role in forming an effective adsorption layer on the metal interface.

Interfacial Adsorption and Corrosion Inhibition Behavior of Environmentally Friendly Imidazole Derivatives for Copper in the Marine Environment

Copper and copper alloys are commonly used in industry due to their excellent mechanical properties, making research on the corrosion resistance of copper of great significance. The corrosion inhibition properties of 2-imidazolidinone and allantoin for copper in 3.5 wt % NaCl were studied by weight loss and electrochemical tests. Changes in the density of the copper corrosion current and the impedance module indicated that 2-imidazolidinone and allantoin exhibited cathodic corrosion inhibitors and a valid protective effect. Meanwhile, the weight loss tests showed that the inhibition efficiency of 2-imidazolidinone and allantoin at 3 mM reached 98.94% and 97.82%, respectively. The surface physiochemical properties were qualitatively and quantitatively studied by using SEM-EDS, XPS, white light interferometry, and contact angle analysis. The interfacial adsorption behavior revealed by QCM, synchrotron radiation micro-infrared, and adsorption isotherm analysis indicated that both imidazole derivatives formed an effective and rigid physical adsorption film and obeyed the Langmuir adsorption model on copper, while both the mass and thickness of the adsorption film formed by 2-imidazolidinone were higher than those of allantoin. This study contributed to an in-depth understanding of the interfacial adsorption behavior and corrosion inhibition ability of 2-imidazolidinone and allantoin and provided guidelines for the design and development of novel heterocycles as potential corrosion inhibitors for copper in marine environments. In particular, copper was used as a corrosion inhibitor in seawater storage and transport equipment.